Debian :: How To Download ISO Image And Burn It Into CD
Sep 20, 2010
I am new to Linux currently using Lubuntu , Puppy etc . What I did with Lubuntu I downloaded iso image burnt it into a CD and boot from that CD thats it. Apparently Debian has no iso download link. It is asking me to install with jigdo (I am not familiar with it). I dont want to use a CD with minimal install (because of slow internet speed) How to download an iso CD image
I have a touchscreen panel pc that boots a version of Debian. I have very little experience with Linux in general. I need to quickly get up to speed with this operating system and Debian in general. The panel pc uses an ARM 9 processor, which I need to program to control a lighting system. I have a good back ground in C programming and embedded control. send me a link to an ISO file of Debian that I can burn and load on my main work pc.
I got my parts and am looking to build it tomorrow, however I don't have an OS with me to test it. This is mostly for college, multimedia stuff, so I'm obviously going need Windows on it. I'm leaning towards Debian or a Debian derivative like Ubuntu, I used that back when it was trendy and found it pretty good, but I hear Debians the same but better.
I want to get Linux on it at some stage - is it easy to install Linux on the machine first then windows, or do I have to do it the other way around? I've never installed Linux FIRST. I want to assign a particularly partition to it and keep the free space for when I install Windoze on it.
How big is the basic Debian install and where's the best place to download it? I have a shitty connection here so I can't really download a DVD image.
I am trying to download debian onto my amd64 machine, but i found a list of 8 dvds. Can I perform a complete Debian 6 installation with the DVD-1 alone? why there are so many images with different DVD names?
I'm trying to install debian on a buffalo linksystem and the tutorial is created for a debian lenny installation but I cannot find a download mirror anywhere for anything except debian 6. point me to a download location for a debian 5 x32 cd-image?
Why can't I burn image with k3b After I' ve tried to burn it it says: "Completed succesfully". But when I then check my DVD, there's absolutely NOTHING on it... and there it says:"0 Objects"It seems like it has only got a new label.And burning an image should else be one of the most easy things in life...And it SEEMS very easy when reading a tutorial.
I created a ISO under DeVeeDee and went to burn it with Brasero (also tried with K3B) and they both came up with error messages.k3b comes up with "Internal error. Short read! Please report" and stops at around 3% and 3-4 minutes into burning. The same error happens under Brasero, it'll stop after a few minutes.
Am trying to burn an iso image that i downloaded. When using Brasero (even on the slowest burn) and at the end i get an error message. Have also tried XfBurn, but when i choose the file the image is in and click to open it appears on the very top of the panel and i can't get into it.
I have download Slackware 13.37 DVD via bit torrent.But it contain several files in addition to ISO image.I try to burn that folder which contain all this files as image.But it detect only the ISO image. Do i need to burn all this files to DVD or if i burn only the ISO image file will it work.Can i burn them in data format to a DVD.
If I have ubuntu installed on some machine, how can I burn the ubuntu image that is on that machine onto a DVD so I can install that exact image onto a new machine?
Just finished downloading the CentOS5.5 x86_64 DVD images (2 ISO's), and realize that I have almost run out of DVD-R's. First ISO is a perfect fit for the 4.7GB DVD, the second only is ~400MB. Wondering if there may be any issue if I burn the second one to a CD (which I have plenty). I guess it should be okay, but wanted to double-check.
I read in the F11 install guide that you can download a install iso image and then do an internet install. Since my F11 DVD hasn't arrived yet; I downloaded that ISO ; and figured it'd be a quicker install anyway, since that way I'd avoid having to download all the updates after the DVD install.I have a USB CD-RW drive attached to my laptop, currently running F7. Almost all of the instructions I see for burning a CD image are for Win users and Win software. I did download Brasero and it's acting flaky; it seems to want to unmount my CDRW drive, even when I'm logged in as root; so it doesn't give me that option to burn to that disk.
I found K3B, but that's for KDE and I'm using Gnome -- is there any good CD burning software (with a link please?) I can use?
I am having trouble burning an iso disc image that I downloaded of the Windows Vista Recovery disc for a friend who cannot boot her computer anymore. I downloaded the iso disc image and it mounts on my computer just fine, so it should be able to be burned as the disc image to a CD no problem. However, each time I right click on the iso file, and go down to Write to Disc, and then the menu comes up and I make sure that the destination drive is my CD/DVD burner drive with a blank CD-R in the drive, it burns the disc, but it always ends up being a CD with the file of the iso on the disc...!! It doesn't burn the image, it burns a copy of the image as a file! I uninstalled the CD/DVD burning software that was on my computer and installed CD/DVD Creator instead from the Ubuntu Software Center.
I tried following the steps on [URL] which tells how to burn a disc image from an ISO file. I follow it exactly, but I still get the same results: I get a disc that is not the image, but has the image on the disc. Now, I can mount the image on the disc on my computer, but that won't do my friend any good who needs to BOOT off this disc to fix her computer running Windows Vista. But ever since I wiped out my computer and went Ubuntu, I haven't been able to write an iso disc image to a CD or DVD properly. Does it matter if it is a CD or a DVD that is used? Like, if I put a DVD in, would the disc iso image burn to the DVD rather than a CD because of the way the image was made? For some reason I never thought it mattered, but does it?
I am using Oracle Enterprise Linux version 4 update 7. I would like to create and burn iso images via the terminal. Assume I have a folder called movies in directory /root/Desktop.I would like to create a movie.iso image ans burn it using mkisofs and cdrecord.
I've been tring to burn an iso image to a DVDRW using K3B and the progress has been setting a 99% for almost an hour. the iso image is only 2GIGS. why is it taking so long?
I'm trying to create a DVD, I'm using DVDStyler 1.7.2 on Jaunty. The problem I'm having is that whenever I try to burn or make an ISO image, it crashes. Usually at the "Create menu mpeg" line on the Generate DVD dialog.
I have Ubuntu Jaunty Jackalope running on my home PC (dual boot with Win XP) and have received notification that this will no longer be supported and I should upgrade to 11.04. I have a slow and costly internet connection at home and don't want to download the upgrade directly onto my computer there.Is it possible to download the upgrade somewhere else and burn to a CD to run in my home computer? I see I can do this for a new install but was wondering if it is possible for an upgrade?
I recently tried to burn an ISO image to a DVD. Everything seemed to be going fine except Brasero froze at "Finalizing". It stayed there for about 10 minutes before I gave up. When I hit cancel nothing happened. When I tried to eject the drive nothing happened. Not until I shut the computer down and restarted was I able to open my DVD drive. Upon trying to read the disc no computer shows that it has anything on it.
There is a command that you can type into the terminal that would "burn" an iso image to a storage device (usb). In ubuntu, this command would be <dd if=(path leading to iso) of=(device to be "burned" to)> Is this the same in Fedora, or is it a different command?
I have a Canon iR3570/iR4570 PXL, and installed the driver CQue 1.0 TCP/IP Queue from Canon webpage.
The problem: - if i try to print an OpenOffice or LibreOffice Calc with an image and text, the image is not printed (the space is blank). - if i try to print an OpenOffice or LibreOffice Calc with just an image, it's printed great. - if i try to print an OpenOffice or LibreOffice Impress, the images are not printed but the text is printed great.
I have downloaded iso image of matlab provided by my school. As I mount the image using gmount, I saw number of files. One of the file name is 'install'. I imagine this is the file which will initiate the installation process, but don't know how to use it. Do I have to go to the mount folder in terminal and type sude install ?
I want to try to download an image of the earth with wget located at [URL] which is refreshed every 3 hours and set is as a wallpaper (for whom is interested details here). Wen I fetch the file with Code: wget -r -N [URL] the jpeg is only 37 bytes and of course too small and not readable.