I need to upgrade from xen-3.0.3-64.el5_2.9 which includes xen 3.1 to something that includes >= xen 3.2
1. what happened to xen-3.0.3-64.el5_2.9 and
2. where I can get an rpm for a x86_64 box with a xen version >= 3.2?
Maybe this should be asked on the hplip website somewhere but I will ask it here. I am running CentOS 5.3 x86_64. The latest rpm version of hplip which I can find, and which is installed, is 1.67 but I need at least version 2.84 of hplip for my printer, an OfficeJet j6480.
Has anyone installed hplip version 2.84 or later for an x86_64 system ? Do either the hplip-2.8.4.run or hplip-2.8.4.tar.gz installation methods install hplip 2.84 for an x86_64 system, as opposed to just an x86 system ? Has anyone produced on he web somewhere a 2.84 or later hplip rpm for x86_64 that I can use rather try to figure out how to do it myself ?
I am in the process of building a new server on an Asus P5QPL-AM motherboard and an Intel E8600 processor.explain to me the difference between the two versions and what would you recommend.Also, is there any advantage of SATA over IDE hard drives?
View 1 Replies View RelatedI've got two USB webcams I'm trying to get running with CentOS 5.4 x86_64. I've downloaded and installed the gspca driver from http://mxhaard.free.fr/spca5xx.html. Running lsusb yields:
Bus 002 Device 003: ID 0ac8:307b Z-Star Microelectronics Corp. USB 1.1 Webcam
Bus 002 Device 002: ID 0ac8:307b Z-Star Microelectronics Corp. USB 1.1 Webcam
My problem is that I'm trying to install CentOS 5.4 x86_64 DVD ISO on Supermicro X7SBI server with installed Adaptec RAID 3405 controller.
I created RAID 5 array and is working fine (adaptec status says Optimal) but I can't install CentOS to that array (1.5TB size).
Whenever I try to install with: linux dd
I'm asked for a driver, which I have downloaded from Adaptec site and extracted contents to USB drive (in installation found as /sba1) which has now a lot of IMG and some ISO files on it.
I try to load (I simplified names) RHEL5.img, CENTOS.img... with x64 names (one exact name: aacraid driverdisk-CentOS-x86_64.img) and I always get the error message: "No devices of the appropriate type were found on this driver disk"
This is going on for a week now and I can't find the right driver or something I'm doing wrong to get install done.
This is my first post, I hope I'm the the right place. I installed mysql mysql-server php-mysql perl-DBD-mysql libdbi-dbd-mysql via "yum install -y" on a server running CentOS 5.3 X86_64 The install completes successful with no errors, but once I start mysqld via "chkconfig --level 35 mysqld on" ; "service mysqld start" There are no errors in /var/log/mysqld.log netstat shows mysqld listening on 3306 and localhost is in /etc/hosts
[Code]...
I have an i5 Thinkpad running Windows 7 64-bit. VT is enabled in the BIOS. I have installed vmware server v 2.0.2 but am unable to install Centos 5.5 x86_64 as a guest OS. The steps that I followed are as follows:1. Created a new VM, specifying RHEL 5 64-bit as the intended guest OS (per vmware documentation - Centos is not available as a selection2. Downloaded all 8 iso files for Centos v5.5 64-bit3. Modified the CD/DVD drive to 'connect at power' and use an iso with the path pointing to the x86_64 iso 1 of 8When I power up the VM, the console window displays 'ISOLINUX 3.11 2005-09-02 Copyright (C) 1994-2005 H. Peter Anvin' and nothing else. The installation splash screen never appears. As a test, I downloaded the first of 7 iso files for the 32-bit version of Centos 5.5 and pointed the CD/DVD drive to that iso. In that case, the installation starts as expected. I would really like to get the 64-bit version installed and running.
View 3 Replies View RelatedI'm trying to get a Digi Edgeport/8 working under x86_64 CentOS 5.3. This is a USB to serial conversion box that takes a single USB port and breaks it out into 8 DB-9 serial ports. We're running the 2.6.18-128.el5 x86_64.
This box has worked fine on many systems for us from RedHat 7.3 to Fedora Core 5 from everything back to the 2.4.20 kernel up to 2.6.16.16. On the CentOS box, in /boot/config-2.6.18-125.elf, the following is set:
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
Which is all we've ever had to do in the past and plugging the box in to the system, it will auto-configure.
what I need to do to get this working in the CentOS 5.3 64-bit world??? Time is critical for this to get fixed!
i like to use my DVB-C Card KNC-One on Centos 5.5 x86_64. But i cant get it to work. on a 32 Bit Centos this is working like a charm. I tryed several different kernels together with the video4linux-kmdl
At the moment i am using this kernel: 2.6.18-194.3.1.el5.centos.plus
[Code]....
I am brand new to this forum! I have spent some time on other Linux forums but based on my usage of CentOS I figured that it would be best to come straight to the pros. I've been using CentOS for a while now, mostly as a web server. Actually I use it as the base and installed Parallels Plesk Control Panel.
Anyway I want to setup a VPN and so far I haven't found any real solid documentation on how to do that! Yes I could install DAG/RPM Forge but what I really want to know how to do it from scratch. What I mean by scratch is that I want to download the tar.gz package from openvpn.net and then build it as required. I don't know much about building or compiling a package so that is why I have come here for help! I am guessing that I need to compile openVPN with openSSL and probably a few other packages... I could use openSWAN but I don't want to.
In the system-config-display the system sees the video card but when you look in the Configuration tab it is running on the vesa - generic driver.I downloaded the latest driver from ATI for x86_64 Linux and after I ran it there was an error that it could not find X-server:
[root@coopers ATI-4770]# chmod +x ati-driver-installer-10-5-x86.x86_64.run
[root@coopers ATI-4770]# ./ati-driver-installer-10-5-x86.x86_64.run
Created directory fglrx-install.ob5679
[code]....
what is the postfix version comes with CentOSPlus repository for centos 5.4
View 2 Replies View RelatedI have downloaded all files from [URL]... and burnt a DVD. How can I now install centOS 5.3 on my server/computer ?
View 4 Replies View RelatedI am trying to install the ATI 10-11-x86.x86_64 But I have problems attached the installation log file
[Message] Kernel Module : Trying to install a precompiled kernel module.
[Message] Kernel Module : Precompiled kernel module version mismatched.
[Message] Kernel Module : Found kernel module build environment, generating kernel module now.
AMD kernel module generator version 2.1
doing Makefile based build for kernel 2.6.x and higher
[Code]...
I found some information. [URL]... This guy is libvirt 0.8.3 But Centos 5.5 x86_64 using libvirt 0.6.3, how to upgrade to 0.8.3?
View 1 Replies View RelatedJust finished downloading the CentOS5.5 x86_64 DVD images (2 ISO's), and realize that I have almost run out of DVD-R's. First ISO is a perfect fit for the 4.7GB DVD, the second only is ~400MB. Wondering if there may be any issue if I burn the second one to a CD (which I have plenty). I guess it should be okay, but wanted to double-check.
View 2 Replies View RelatedI am trying to install a minimalistic centos 5.6 VM.I have pulled the necessary RPMs from the centos website, using the following command:
yumdownloader --disablerepo=* --enablerepo=CentOS-5.6-x86_64
--destdir=/tmp/transitRPMs/ --installroot=/tmp/transitRPMs/ --resolve kernel
vim-minimal wget yum dhclient grub rootfiles openssh-clients openssh-server sysklogd passwd star attr[code].....
I do not see any 32 bit packages in the /tmp/transitRPMS directory, which good, and that is is what I expected / want.I have also downloaded the repodata and images directory from one of the CENTOS mirros, from the 5.6 directory.I am using the netinstall CD to kickstart the VM and using my local HTTP repository , which I created using the RPMs pulled from the yumuploader command.When I try to install the VM, after the disks are formatted, the installer starts asking for missing i386 or i686 packages. This is happening in both interactive installs, where I select absolutely no package; and also in the kickstart installs, where I have specified @core for the packages. I am unable to understand this behaviour. It was not so in CENTOS 5.5 x86_64 bit. I do not want to install 32 bit packages on my 64 bit machine.
I have checked and double checked the .htaccess and httpd.conf to make sure everything is correct and I'm sure it is. I have AllowOverride set to All in the httpd.conf, Apache sees and is reading the .htaccess because I get a 500 Error when I put garbage text in the file. I'm lost now.
View 9 Replies View RelatedI can't update centos 5.1 x86_64 from updates Is the correct repository [URL]? But I found this dependency (nspr >=4.6.99 ) inside the [URL]. I need to setup these two repositories ?
#yum update
Loading "installonlyn" plugin
Setting up Update Process
Setting up repositories
[code]...
I suffered a kernel crash today - then noticed a newer kernel was available, so I updated to it.However, it's since crashed again! Here's the message - can anyone tell me what's going on, is this a known issue or is it bad hardware?
general protection fault: 0000 [1] SMP
last sysfs file: /devices/pci0000:00/0000:00:00.0/irq
CPU 2
[code]....
On my 64 bit Cent OS 5.4 servers/workstations, my Passive Mode FTP iptables rules constantly stop working. If I do a lsmod | grep -i ip_conntrack_ftp
View 3 Replies View RelatedLooking at the various OS image download options, I see that I need to download/burn 8 ISO images for CentOS5.5 x86_64. Trying to see if it is at-all possible to avoid downloading/burning all 8 CD's, and make-do with the 1st one alone. My target platform is a commodity desktop running AMD AthlonII X2 250, with dual-channel 4GB DDR3 @1333MHz, and 500GB 7200rpm SATA (no RAID, SW or HW).
I read in another forum post that for minimal install without X, the 1st CD should suffice. Is this correct ? While I do not expect this forum to answer OpenVZ questions, but if someone happens to have experience in installing OpenVZ on such a system, how much extra I might have to download online, to get the system functional.
The guestOS in the OpenVZ partitions would be a mix of CentOS5.5 64-bit and 32-bit, and few running Ubuntu 10.04.1 32-bit. I am told that this is possible. Effectively it means I'd need the (pseudo?) 32-bit library support.
know the size of the default CentOS 5.5 x86_64 install?
I need to know how large to make the OS partition.
Attempting to compile an application that is not located in any of the repos yet for 11.3 64 bit. I have downloaded the appropriate src and untarred it. However, when I attempt to run the ./configure command here is the error I receive. checking build system type... Invalid configuration `x86_64-unknown-linux-': machine `x86_64-unknown-linux' not recognized configure: error: /bin/sh ./config.sub x86_64-unknown-linux- failed
I have made sure that I have all kernel-headers packages installed and am unsure as how to proceed. I tried using the command "./configure --build=x86_64" and then receive an error stating that the "SYSTEM IS NOT SUPPORTED" and continued errors stating that gcc is not installed, eve though it is.
While attempting to install CentOS 5.4 x86_64 from DVD (downloaded torrent), I encountered a fatal error that aborted the install and dumped a bunch of log files. I attempted this a couple of times resulting in the same error. I tested my hardware via CentOS 5.4 x86_64 live cd without exception. Here is my install configuration:
1)Booted to DVD
2)Skipped media test
3)English (English)
4)U.S. English
[Code]....
I'm trying to setup CentOS 5.4 x86_64 on a new machine but am running into problems. The machine is: CPU: Intel Core i7-860 RAM: 4GiB DDR3 Motherboard: Intel DQ57TM When booting from the disc, I get to the initial splash screen but almost immediately after that, I get a kernel panic.
None of the lines leading up to it mean much to me so I'm not sure what to copy here but the last line says: <0>Kernel panic - not syncing: Fatal exception
I have a PXE/kickstart installation system running ok. I would like to build a custom installation x86_64 .iso with the i386 .rpms removed. Currently I install from the standard x86_64 iso, then go and remove the i386 rpm's with all the attendant problems and impact on docs etc. Has anybody tried this? Is it as simple as just deleting *i386.rpm and then building another .iso from the resultant installation tree?
View 9 Replies View RelatedWhile searching for the maximum numbers of CPUs supported by CentOS 5 x86_64 I found the following page: [URL] The question I have regarding the specified information ("64/255" logical CPUs) is, which number means what. Does this mean 64 real CPUs with a maximum of 255 cores/hyperthreaded CPUs or something similar or totally different?
View 9 Replies View RelatedSo, I need to use the HDMI out on my Radeon 57xx because the DVI input on my monitor is in use by another machine that has no other way to connect to it, and I won't swap cables around all the time. Of course, because someone somewhere decided that if it's plugged in to HDMI it must be a TV and have overscan issues I have a nice black box surrounding my screen image.
In Windows I can resolve this by opening CCC and changing the overdrive settings. Thus far I have yet to be able to get CCC to open and the only thing the console tool allows you to do is toggle overscan on and off, which doesn't seem to have any effect so far. Has anyone gotten this issue resolved? Do I need to focus on getting CCC working (which I probably won't use for anything else...) or is there a console command that can handle the job? Change to xorg.conf? Anything?
I am very new to this site. Is there a good tutorial on installing CentOS X86_64 on VMware Server Console?
View 2 Replies View Related