Was messing around today and installed kde-standard over my Ubuntu 11.04 install and I played around for a bit but wanted to go back to Unity but I switched it back to Ubuntu at the login and all the menu's are gone, just get my desktop, can right click and was able to make a launcher so I could get online but nothing else.
View 3 RepliesX is working, I get a desktop, all updates are current, just no Unity menus/window/widgets/whatever, blank desktop with single mapped network folder and no working keyboard shortcuts after initial login. I upgraded on Alpha 2 and it ate my desktop, never has given it back for 3 months. I assumed eventually the upgrades would fix it. Looked into ditching Unity and doing GDM, but thought I'd wait it out, ran dpkg-reconfigure unity and it did nothing, can't find any relevant errors in the logs, where should I be looking and/or what should I be doing? Running lots of servers on this box and have dual-boot, otherwise I'd probably torch it and start over.
View 1 Replies View RelatedI am trying the daily build of Ubuntu 11.04. When I try to enable Xinerama, so that I can move windows between my two displays, then I log out, and back in, it simply breaks Unity.
I was getting the sidebar, almost on the right side, and the screen was all broken, then the behaviour changed to simply not displaying anithing, Unity not loading whatsoever.
I turned off Xinerama (by editing my xorg.conf) and diabled it, and Unity works perfect.
Here's a copy of my xorg.conf
Quote:
i got an Compaq proliant ML530 server that i installed CentOS 5.3 on i tested the connectivity to the LAN and to the WAN and everything worked. Then i ran:
"yum install xen xen-kernel"
and after that i can't connect to the network if i ping my other servers there's no replay. i assume this have to do with Xen bridge. But since the tutorials dont mention any configuration needed, i assumed that it would work out of the box.
I am trying to install Unity but it gives me an "Requires installation of untrusted packages" error and I don't know how to fix it.
View 9 Replies View RelatedI'm trying to install Atheros AR9485 wireless card driver on debian, and I had no luck.
I followed this [URL] .... to install backports kernel version. The wireless card worked, however, intel display driver displayed the color in the wrong way.
Red pixels are green, and green are yellow. It was displayed like when someone try to connect a PAL system to a TV that supports only NTSC.
This is my lspci output:
Code: Select all00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09)
00:03.0 Audio device: Intel Corporation Device 0a0c (rev 09)
00:14.0 USB controller: Intel Corporation Lynx Point-LP USB xHCI HC (rev 04)
00:16.0 Communication controller: Intel Corporation Lynx Point-LP HECI #0 (rev 04)
[Code] ....
Is there is a way to compile only AR9485 module from the kernel?
Add the following
Code: Select alli915.i915_enable_fbc=0 to your GRUB_CMDLINE_LINUX_DEFAULT= in /etc/default/grub so you would have something like that
Code: Select allGRUB_CMDLINE_LINUX_DEFAULT=" i915.i915_enable_fbc=0 nomodeset quiet splash"
i want to use unity on my computer without reinstalling ubuntu, i wish to use apt-get to install it. i have heard that it's possible, but i can't figure out how.
View 2 Replies View RelatedI just upgraded to the new 9.10. In 8.04 when I went into "Restricted Drivers" it showed something for my video card. Now there is nothing.
I'm trying to play a game (Counter-Strike) and it's just too laggy, probably because I don't have any drivers installed for the video card.
It's an ATI Radeon X-1950 Pro. What can I do?
It seems that updating the Kernel breaks my installation. I've tried it twice, and both times it disabled my gui desktop. I'm posting this with links2 in my terminal. The terminal works perfectly.
This is really annoying, as I can't even use my computer. What do you think is the problem?
I currently have a Windows 7/Ubuntu/Mac OS triple boot. However, every time I boot into Ubuntu 10.10, then boot into Windows, it fails to boot until a chkdsk is run. I see no particular reason this should happen, is there a way to either patch this, or to prevent Ubuntu from accessing the NTFS partition? I think this is where the problem is focused.
View 2 Replies View RelatedI did an update during a time when power was cycling due do a nasty snow storm, but I'm pretty sure the update was completed successfully before I lost power. What did happen though is that my BIOS setup was reset.
Now if my HP Laserjet 1020 is plugged into USB during boot all other USB devices freeze for a while. So I played with my BIOS setting for USB:
- Enabled V1.1 and V2.0
- Disabled System USB Shadowing
So now my bootup doesn't hang. But now when I actually go into Karmic I still can't print.
dmesg shows the following:
[ 205.940008] usb 1-10: new high speed USB device using ehci_hcd and address 9
[ 219.510026] hub 1-0:1.0: unable to enumerate USB device on port 10
[ 223.430008] usb 1-10: new high speed USB device using ehci_hcd and address 10
[ 223.600766] usb 1-10: configuration #1 chosen from 1 choice
[Code].....
But I feel like I should warn everyone that upgrading (with PackageKit) a Kubuntu 9.10 (64-bit) to Kubuntu 10.04 LTS, completely breaks the system and makes most everything useless ... In my case it found errors in the upgrading process, and also the bug rapport tools didn't work My 9.10 was only a few weeks old and I have done nothing unusual with the system. (My computer is a Compaq 615 laptop). If there are solutions to repair the system, then I would like 2 know.
View 3 Replies View RelatedI had a working lirc using my hauppage card. After upgrade to Lucid, it no longer works. I don't see errors, but it appears to me is is not detecting the Hauppage card:
Code:
mythuser@PVR1:~$ dmesg | grep lirc
[ 19.761015] lirc_dev: IR Remote Control driver registered, major 61
[ 19.928886] lirc_i2c: chip 0x0 found @ 0x18 (Leadtek IR)
[ 19.928890] lirc_dev: lirc_register_driver: sample_rate: 10
[61920.300286] [<e086d654>] lirc_unregister_driver+0x44/0x160 [lirc_dev]
[61920.300289] [<e089a02b>] ir_remove+0x1b/0x30 [lirc_i2c]
[61920.300318] [<e089abc2>] lirc_i2c_exit+0x12/0x14 [lirc_i2c]
I have an ATI radeon HD 3400 series video card, and the open-source drivers make my computer run really hot. I tried installing FGLRX by using "Check For New Hardware Drivers", but it did not work, so I installed the ATI catalyst 10.5 package from AMD's website, and am using Xserver-xorg-core-1.7.6-2ubuntu7+backclear1 from k0ekk0ek's PPA so there is no lag when minimizing windows and such.
Everything was perfect until the 2.6.32-23 kernel update came along. I let it update, and rebooted, but the ATI driver no longer starts, even when I uninstall and reinstall it.
I am just using the 2.6.32-22 kernel for now, as the 2.6.32-23 kernel still runs hot without the ATI driver enabled. I would like to start using the new kernel at some point...
early tl;dr: The fancy grub breaks on my wubi 10.04 install, can I force it to use the old grub?
When I rebuild grub.cfg (last time was yesterday for kernel update to .37), and shut down / reboot, grub breaks because it can't 'loadfont' and a few other errors which are related to the 'graphical' grub boot menu.
To fix this I have to boot into a live CD (also Ubuntu 10.04) and run the following:
Taken from [URL]
Code:
sudo fdisk -l
sudo mkdir /win
sudo mount /dev/sda1 /win
sudo mkdir /vdisk
sudo mount -o loop /win/ubuntu/disks/root.disk /vdisk
[Code]....
I know how to fix it but is there a way to skip having to do this on upgrades
(If I edit the grub.cfg before shutting down then this doesn't happen, obviously, but sometimes I forget and this is the result. I'd rather stop the problem at it's source than fight against the updater).
I was browsing the available packages to install the weather indicator and noticed that a network indicator was available. apt-get said that it needed to install 'connman' and remove 'network-manager' and 'network-manager-gnome' in order to install the network indicator. I foolishly assumed it knew what it was doing so I went ahead and performed the installation/removal and restarted the computer.
Now I cannot connect to the internet. I only have an ethernet card for connection to the internet, no wireless or otherwise. The configuration I use is not DHCP, but a manual settings of address/subnet/gateway and name servers
When I try to set the network values through the network indicator some of them do not stay set. The gateway value appears to be set, but then after closing down the indicator window completely it comes up with the value 'Modified'. The DNS servers is the only other value that does not stay set, but it only changes to be blank. The connection never works.
So, I downloaded 'network-manager' and 'network-manager-gnome' on another computer, transferred the packages by USB, and reinstalled them (uninstalling connman and the network indicator). But the network connection remains broken. At least with 'network-manager-gnome' the values I set stay set, they just don't work anymore. I've tried editing /etc/network/interfaces to previously working values directly, but they do not seem to have any effect either. The connection no longer works.
I really do not care if I use the network indicator or not at this point, I simply want the network connection to work properly.
Edit: I realize I forgot to say that I'm using Ubuntu 11.04 (upgraded from 10.10). The network card is the "Integrated Broadcom 57780 Gigabit Ethernet controller".
My mythbuntu 10.10 system including its lirc managed remote control has been working fine.I've recently done some updates (see below) and now the remote doesn't work correctly (only some of its keys seem to work). I suspect that lirc is no longer managing the remote and now instead the remote is now being treated like a keyboard.How do I get lirc managing my remote control correctly again,Before the updates the kernel was:
Code:
$ uname -a
Linux pvr 2.6.35-28-generic-pae #50-Ubuntu SMP Fri Mar 18 20:43:15 UTC 2011 i686 GNU/Linux
[code].....
I've just installed Lucid Lynx on both my machines in the interest of sitting and waiting for the Unity/Gnome 3 storm to blow over. On the HP (see below), everything works great, and I've followed instructions online on how to upgrade to LibreOffice, upgrade the kernel to 2.6.38 using the kernel PPA, etc.
However, on the IBM, I'm using Nvidia proprietary graphics drivers. These work well on the stock kernel that 10.04 installed (2.6.32-32), but installing 2.6.38 seems to break the driver. If I install the driver first, and then the kernel on top, X stops working and I have to revert to the default, generic driver to get back in. Once there, I cannot install the driver again. The Additional Drivers dialog goes through the motions, but then drops a "systemerror: installarchives() failed" error message.
So, is there a different version of the driver I should be trying to install? I should clarify at this point I tried all three options the Additional Drivers dialog provided me, all gave the same result (version 96, version 173, and version current).
Or should I leave the kernel at 2.6.32? Is there any downside to leaving it?
I installed this package on Fedora 15.
[URL]
I tried to start the application and then the system crashed and showed a message a problem has occured and it could not be repaired by Fedora itself. I had to re-login to fix the issue. When i try to re-login everytime this message appears... like an endless circle.
I am running OpenSUSE 11.4 on my laptop and I decided to try out the Gnome 3 shell. I really like the design and I like the way it functions so I would like to keep using it, but it seems as though every time I install a new application or package it breaks Gnome 3. This is really frustrating because when I then try to log in it just gives me that cryptic error message that im sure you all have heard about "Oh No! Something went wrong!" or something like that and then it tells me to log out.
I know a fair bit about linux in general, but im no expert by any stretch of the imagination (my experiences have been with Ubuntu, Xubuntu, Linux Mint, and some older distros) so im only used to the Apt-get package manager and I find zypper to not be very understandable. So I don't know if im breaking Gnome 3 every time I install something because of some dependencies not getting installed. My laptop is running a Intel cure 2 duo processor and an Intel mobile graphics chipset (which runs gnome 3 fine normally).
I upgraded from Maverick a few days ago, and ever since, OpenGL effects are getting disabled by KDE with a message stating that the effects were making the machine slow. Switching to Xrender works fine, but XRender isn't as advanced as OpenGL.
View 9 Replies View RelatedI just upgraded to lenny (stable) from a working etch system. It went pretty nicely but I'm having a problem with the print system.
Ok, I have an HP Laserjet 4M+ connected to my system by USB. (I have another color printer too and a scanner but I don't use them often).
I use CUPS. I never bothered with the HPLIP packages because straight cups has always worked well.
What happens now is that I'll send a job to the printer and nothing will happen. The printer won't get it. Looking at CUPS on the localhost:631 page I can see that the printer is on, connected, ready; the job is there too but just stuck on "processing".
Now here's the thing. If I manually load the ehci_hcd module with "modprobe ehci_hcd" then the job will make it to the printer and it will print.
I can't just make that module load at boot time because if I do and the printer is off, it doesn't work. (I have to unload it and reload it). For whatever reason, I have to make sure that module gets loaded AFTER the printer is turned on, or nothing gets sent to the printer!
Today I installed an upgrade through update manager of the Adobe Flash Player Plugin and it breaks the flash in all three of my browsers: Firefox, Opera and Chromium. Had to revert to previous version to get it to work. Ubuntu Version 10.10 i386 Sony Viao Laptop.
View 2 Replies View RelatedI just installed a test Natty VirtualBox server from the "mini" iso. After doing that the normal boot always ends with a blank screen and cannot login. The recovery boot option does work normally. After much digging around and various tests I found that the "splash quiet" boot options cause this issue.
I removed them from the /etc/defaults/grub file and ran update-grub. Next boot the login screen came up after as normal. It seems when the splash flashes that purple screen with the Ubuntu 11.04 message it is breaking something and does not get back out of some graphics mode.
This is in a VirtualBox window and I noticed that vesa framebuffers seem to be used by default in grub now. I never had this issue in previous releases and I'm just wondering if others have seen this and if there is a better fix than disabling splash. I don't mind having it disabled as this is a server install anyway and I'm fine with seeing debug messages during boot. If other have seen this then perhaps it needs to be logged as a bug?
My system with kernel-2.6.35.10-74.fc14.x86_64, NVIDIA 3800 + Samsung 2233 and 3Dvision kit works fine, but upon upgrading to kernel-2.6.35.13-92.fc14.x86_64 the system won't go past the blue->white bar along the screen. The modprobe.d directory has the file blacklisting nouveau and there is the grub entry rdblacklist=nouveau, but do I need to re-run the nvidia installer. If so I think I need to reset the init level to stop X11 trying to load. and will I need to keep doing this everytime I upgrade the kernel if I have nvidia drivers installed?
Leigh123linux desired code output is below
***
abrt-addon-kerneloops-1.1.18-1.fc14.x86_64
kernel-2.6.35.10-74.fc14.x86_64
kernel-2.6.35.13-91.fc14.x86_64
[Code]....
I'm trying to update my Ubuntu 10.04 to 10.10... But I get this error message:pkgProblemResolver:Resolve generated breaks, this may be caused by held packages
I tried to disable all the repositories, and also "sudo apt-get -f"... But still having this error message...
1. I didn't like the icon theme and changed it to Ubuntu Mono Light. But is there a way to get the Min/Max/Close buttons to how they are in Radiance when maximized, or is that dependant on something else?
2. Is there a way to disable the Unity dock, but not the Unity feature where the Min/Max/Close go into the command bar?
Just moved to Ubuntu 11.04 with unity and only have one problem...For most of my desktop needs I prefer to have the Unity Launcher up all the time (fullscreen apps don't cover it), and have set this option with ccsm.
However, when I watch mythtv, it is also under the launcher (and the top panel as well). How can I force mythtv to cover the launcher?
What I really need is a keyboard shortcut to hide the launcher, but the only shortcut is for "show launcher". (I guess the devs assumed everyone would want it hidden by default).
This, by the way is not my usual way for viewing mythtv. I have a projector attached to the desktop PC and it doesn't get a Unity Launcher by default (in Twinview), so no probs. However, occasionally I want to watch something on my computer screen, and that is when this issue arises.
I upgraded to 11.04, but the updgrade crashed, and now it has some errors with Unity crashing every time I open a terminal. Is there any way to re-install without having to reconfigure all my programs? I am running a dual-boot.
View 3 Replies View RelatedSince there is a wrong reference in the doc
https://bugs.launchpad.net/ubuntu/+s...cs/+bug/773427
could someone tell me how to add more workspaces in Unity?