Ubuntu :: Virtual Box Repository Error "Unable To Find Expected Entry Non-free/source/Sources In Meta-index File"
Dec 25, 2010
I am getting virtual-box repository download error as given below:
Code: Failed to fetch http://download.virtualbox.org/virtualbox/debian/dists/maverick/Release Unable to find expected entry non-free/source/Sources in Meta-index file (malformed Release file?) Some index files failed to download, they have been ignored, or old ones used instead. Repository: deb http://download.virtualbox.org/virtualbox/debian marverick non-free
View 5 Replies
ADVERTISEMENT
Jun 20, 2010
I played a bit with the upgrade configuration files, to solve a couple of problems I have with Ubuntu 10.04, now when the upgrade procedure starts I getQuote:Failed to fetch Release Unable to find expected entry multiversdeb/source/Sources in Meta-index file (malformed Release file?)Some index files failed to download, they have been ignored, or old ones used instead.
View 9 Replies
View Related
Jan 2, 2010
I'm trying to upgrade from 8.04 to 9.10 via 8.10 etc. When I run update manager, I get this:
W:Failed to fetch [URL] Unable to find expected entry universal/binary-i386/Packages in Meta-index file (malformed Release file?), E:Some index files failed to download, they have been ignored, or old ones used instead.
and then it closes. I've unselected all the third party packages and tried various servers, but no difference. I can wget the file, but when I look at it I see entries for "universe/binary-i386/Release", but nothing for "universal" .
View 4 Replies
View Related
Jul 9, 2011
When I want to update with synaptic I get this error:Ophalen van ts/Release is mislukt Unable to find expected entry 'iceweasel-5.0/source/Sources' in Release file (Wrong sources.list entry or malformed file)Some index files failed to download. They have been ignored, or old ones used instead.
View 2 Replies
View Related
Jun 24, 2010
I did the UPGRADE from Karmic Koala to Lucid, and everything was going well. But now I've been having problems with the UBUNTU UPDATE tool for the last 2 weeks. Every time I try to do an update check on the packages, I get the following message:Failed to fetch http:[url]....Release Unable to find expected entry deb-src/binary-i386/Packages in Meta-index file (malformed Release file?)
Some index files failed to download, they have been ignored, or old ones used instead.I've tried changing the servers to MAIN and others, and still no way to solve it. I've also checked for other posts, but haven't found a solution yet. Here's my SOURCES LIST (gksudo gedit /etc/apt/sources.list)# See http:[url].... for how to upgrade to # newer versions of the distribution.
View 3 Replies
View Related
Jan 8, 2011
I am running ubuntu 10.04 on an emac powerpc. I go to the update manager and click on 'Update to Ubuntu 10.10', and then it starts the update and everything goes well until step 2 which is setting new software channels. It displays the error message:
W: Failed to fetch httports.ubuntu.com/ubuntu-ports/dists/maverick/Release
Unable to find expected entry partner/binary-powerpc/Packages in Meta-index file (malformed Release file?)
,E:Some index files failed to download, they have been ignored, or old ones used instead.
View 2 Replies
View Related
Feb 22, 2010
host: CentOS 5.4
guest: FC12
Virtual Machine: Virtual Box 3.1.4
I can not for the work get Virtual Box's Additions to install in my FC12 guest. The error log (/var/log/vboxadd-install.log) shows: Makefile:23: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again.. Stop.
I have tried:
# KERN_DIR=/usr/src/kernels
# KERN_DIR=/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686
# KERN_DIR=/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686/kernel
[Code]...
View 7 Replies
View Related
Jul 1, 2010
When I run the update manager and start updating, I get this error:
W: Duplicate sources.list entry http://archive.canonical.com/ubuntu/ lucid/partner Packages (/var/lib/apt/lists/archive.canonical.com_ubuntu_dists_lucid_partner_b inary-i386_Packages)
View 1 Replies
View Related
Oct 2, 2010
I keep getting the following error when I run sudo apt-get update:
Quote:
W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used.GPG error:
[URL] release Release: NO_PUBKEY 5D654504F1A41D5E
View 1 Replies
View Related
Apr 13, 2011
Ubuntu 1010 server 64bitlighttpdFor the 1st domain,say domain1
I name the index file as:
/var/www/index.html
/home/lighttpd/default/http/index.html
[code]....
View 4 Replies
View Related
Jun 16, 2010
During playing around sources, synaptic playing I messed up the default list. I know I should have been more careful. Anyways could someone tell me what the default the default sources.list that has free and non free etc for squueze please? I have been trying to get the default list but I cannot find it anywhere. There are alot of lists out there but nothing tagged like the "default" list.
View 6 Replies
View Related
Apr 15, 2011
i used when i open my computer everyday that it asks me for updates... but since 20 days till now it didn't ask me for updates like before .. and today .. i was surfing the web .. then the update manager appeared with a notification to update and asked me to hit the button (RUN THIS ACTION NOW) i did hit it .. but when i switched the detailed view ... all the packages were marked by these words : FAILED or HIT .. Then .. this error message appeared :
[Code]...
i dont know what to do with this issue ... i am not professional in ubuntu ..
View 3 Replies
View Related
Dec 19, 2010
Well I downloaded Catalyst 10.12 for linux. Was trying to build packages for Fedora 14. But was unable to find Fedora entry in it. Wonder why it is not there?Here is my X
[Code]...
How am I suppose to install catalyst if they don't have the packages ready yet ? I am not so installing RHEL6 packages in Laughlin cause of kernel conflict. Or is it that Catalyst still not compatible with Kernel 2.6.35.x ?
View 1 Replies
View Related
May 29, 2011
I cant find some good sources for slapt Where i should looking for ?
View 3 Replies
View Related
Dec 28, 2009
How can I use DKMS to force the virtualbox setup to run using the correct kernel sources? This is the error I'm getting in the vbox logs
Code:
Attempting to install using DKMS
removing old DKMS module vboxdrv version 3.1.2
Deleting module version: 3.1.2
completely from the DKMS tree.
Done.
Creating symlink /var/lib/dkms/vboxdrv/3.1.2/source ->
/usr/src/vboxdrv-3.1.2
DKMS: add Completed.
Error! Your kernel source for kernel 2.6.31.6-166.fc12.x86_64 cannot be found at
/lib/modules/2.6.31.6-166.fc12.x86_64/build or /lib/modules/2.6.31.6-166.fc12.x86_64/source.
You can use the --kernelsourcedir option to tell DKMS where it's located.
Failed to install using DKMS, attempting to install without:
Makefile:152: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again. Stop.
Code:
[root@nevada Downloads]# uname -r
2.6.31.6-166.fc12.x86_64
View 8 Replies
View Related
May 21, 2010
I am trying to install Ubunto 9.10 on my windows XP. I try to run it from the live cd. but every time i try to do this.. I get an error "Unable to find a medium containging live file system" I tried it from different cds too... so it's not an error in the cd.
View 2 Replies
View Related
Aug 8, 2011
I am trying to install gcc4.1.1 upon my opensuse machine which already has gcc 4.5 installed but I want an earlier version.
1) I downloaded gcc-4.1.1.tar.bz2
2) Extracted the contents
3) When I tried to run the command "./configure" on terminal its giving error "configure: error: can not find sources in . or ..". However I can see the configure file in the directory. Below are the files present in directory.
[Code]....
View 9 Replies
View Related
May 4, 2011
don't know much, but when I tried to update I get this error:
E: Type 'sudo' is not known on line 52 in source list /etc/apt/sources.list E: The list of sources could not be read.
View 2 Replies
View Related
Feb 8, 2010
I am using preupgrade to update Fedora 9 -> Fedora 12 following these steps: -
Code:
yum -y update
yum clean all
yum install preupgrade
preupgrade-cli
preupgrade-cli "<FEDORA VERSION>"
reboot
I successfully upgraded this box from Fedora 6 => Fedora 9 and I guess I got too confident when this worked without a hitch and went straight from Fedora 9 => Fedora 12. Everything works up until the very end of the upgrade process when I get this error.
Code:
(process:2227): GLib-WARNING **: GError set over the top of a previous GError or uninitialized memory. This indicates a bug in someone's code. You must ensure an error is NULL before it's set. The overwriting error message was: Parsing primary.xml error: Couldn't find end of Start Tag rpm:entry line 15303
[Code]...
View 1 Replies
View Related
Nov 14, 2010
This error comes from the update manager, but I can not see duplicate entries in the software sources. Is there a program that removes duplicate sources? If not how do I find the duplicate entries. Quote:W: Duplicate sources.list entryhttp://archive.canonical.com/ubuntu/ maverick/partner i386 Packages/var/lib/apt/lists/archive.canonical.com_ubuntu_dists_maverick_partne r_binary-i386_Packages)
View 5 Replies
View Related
Dec 1, 2009
I had been trying to install Ubuntu 9.10 after formatting my machine. When i select install of the welcome screen, the logo blinks for few minutes and then displays a error as
Code:
Unable to find medium with live File System
Then goes to busy box.
"The same thing appears with Ubuntu 8.10, which i was using before!"
View 2 Replies
View Related
Feb 18, 2011
Dear all
I am new to git (and storing multiple copies of my code).
I was using git for one month (git status, git add, git commit) to store my files.
I have problems to add more files to my branch
git add BasisExpansion.R
fatal: Unable to write new index file
this was working great unless the day my system administrator destroyed my main partition (it was an accident) and installed everything from scratch. My home directory stayed intact (I did not lose any files not git files that are stored under /home). But from this point of time git returns always that error. My system administrator creater the same user and group as my old user was but this didnot fix the problem.
I am not sure If I can recover my old git structure or would it be better to wipe out the old git dir and start a new one?
View 8 Replies
View Related
Oct 27, 2010
When I run "sudo apt-get update", it says the following:
"W: Duplicate sources.list entry [URL] Packages (/var/lib/apt/lists/archive.canonical.com_ubuntu_dists_lucid_partner_b inary-i386_Packages)
W: You may want to run apt-get update to correct these problems"
Herewith I've attached my sources.list file.
# deb cdrom:[Ubuntu 10.04 LTS _Lucid Lynx_ - Release i386 (20100429)]/ lucid main restricted
# See [URL] for how to upgrade to newer versions of the distribution.
deb cdrom:[Ubuntu 9.10 _Karmic Koala_ - Release i386 (20091028.5)]/ karmic main restricted
deb [URL] lucid main restricted
deb-src [URL] lucid main restricted .....
View 4 Replies
View Related
Apr 17, 2011
Whenever I run $aptitude update I get this error :-
W: Duplicate sources.list entry http://ftp.us.debian.org/debian/ stable/non-free amd64 Packages (/var/lib/apt/lists/ftp.us.debian.org_debian_dists_stable_non-free_binary-amd64_Packages)
W: You may want to run apt-get update to correct these problems
[code]....
View 11 Replies
View Related
May 11, 2010
I am trying to install flash-plugin-10.0.45.2-release.i386.rpm so I inputed the folowing command and got the following error output:
Code:
bash-3.1$ rpm -i *.rpm
error: cannot open Basenames index using db3 - No such file or directory (2)
error: cannot open Providename index using db3 - No such file or directory (2)
error: cannot open Conflictname index using db3 - No such file or directory (2)
error: Failed dependencies:
[Code]...
View 3 Replies
View Related
Feb 18, 2010
If in Software Sources I have "Download from" set to "Server for Australia", then when I run sudo apt-get update, I get a warning at the end
Code:
Reading package lists... Done
W: Duplicate sources.list entry http://dl.google.com stable/main Packages
[code]....
View 3 Replies
View Related
Aug 12, 2010
I am trying to update four OpenSUSE 10.3 servers. This worked once on one server, but I have been unable to repeat that success. I use yast's Online Update to select repositories, but at the end of the repository refresh they keep coming back with 'No active update source is available. Exit Online Update now?' I get this error:
Download failed: File /repodata/repomod.xml not found on media: [URL]
It appears to connect to remote repositories, but always fails. Is it realistic for me to expect to update 10.3, or is it a lost cause? I am not ready to jump to 11 yet, but I am required to update them. I am a newb, so I am not clear on the process. Are package versions locked in place for specific versions of OpenSUSE? If so, how can I find out what the final versions were for 10.3 so that I can at least tell my auditors that they are as up-to-date as they can be?
View 9 Replies
View Related
Jun 7, 2010
Ubuntu 10.04: I get the following error in Synaptic: "Could not download all repository indexes" "Could not get [URL]...86/Packages.gz 404 Not Found" (translated from Norwegian).[URL].. does not exist, but it does for Karmic (change lucid for karmic in the url). How do I correct this in Synaptic?
View 2 Replies
View Related
Oct 5, 2015
I have up until now been able to use the add-apt-repository command without issue but right now it keeps returning an IndexError.
The error is below:
Code:
Select allx@y:~$ sudo add-apt-repository ppa:/kilian/f.lux
Traceback (most recent call last):
File "/usr/bin/add-apt-repository", line 122, in <module>
shortcut = shortcut_handler(line)
[Code] ....
IndexError: string index out of range
I have tried using the command with an empty ppa (just sudo add-apt-repository ppa:) but that comes with the same error. Googling the issue only brought up some bugreports of a month back, and I've used the command with success a few days ago.
View 4 Replies
View Related
Jan 26, 2011
Ive looked up and down but i cant seem to find an answer to my question. Why cant i upload to my ftp site. I am running a lamp server and i installed proftp. i created users and groups. i tested my server and its working fine. but now when im working on dreamweaver to connect to my ftp... It connects fine i can download my files from the site but when i edit them and try to "put" them back. i get an error:
index.html - error occurred - An FTP error occurred - cannot put index.html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured.
[code].....
View 2 Replies
View Related