I have installed a wrong driver few days ago from
http://ubuntuforums.org/showthread.php?t=540296 code...
I'm new to ubuntu, just knowing little about it.
You can ask for more information for my computer
How can I recover the sound ?
I have a fresh install of Natty and i'm having some issues getting sound to work. My laptop has a built in sound card which works just fine. However, i also have a usb 5.1 sound card which isn't working at all. Both devices show up in 'Sound Preferences' but when i select the 5.1 device as the output device sound doesnt work. I ran the alsa-info.sh script and the output can be found here.
View 4 Replies View RelatedNo audio input device can be found in sound preference>input but in sound preference>hardware>it shows the input webcam recorder device.
When I use
Code:
alsamixer
onto terminal it shows this
and also i checked cable device and everything. And it was working till I last hour. I rebooted computer then there's some problem, I haven't change anything before or after rebooting.
I installed debian 4.0 (etch) on an old computer with some pickled graphics card in it, and then I upgraded the computer to one with slightly newer hardware only without the graphics card (the new one used on board graphics). I moved the hard drive from the old one to the new one but when I booted it up it failed to start the X-server and I got some errors listed for "device not found" and "no screens found".
I tried using "dpkg-reconfigure xserver-xorg" however I can't seem to find a working configuration. It seems pretty silly that when installing debian it can detect all this automatically with no problems but when it comes to changing some hardware around you are left in the dark with a complicated re-configuration process. Is there not some way to automate this? I'd rather not have to re-install everything
Up until about a week ago using Kubuntu 9.10, the sound on this computer was fine, but now every day when I turn the computer on I have no sound and I get a notification from Phonon saying:
The audio playback device NVidia (ALC883) does not work.
Falling back to.
If I turn the computer off and then back on, sound is working again. code...
tried to install linuxant drivers which failed and then I uninstalled it. Now sound does not work, installed alsa backports again, installed alsa, alsautils again as well. no luck.
aplay -l
aplay: device_list:235: no soundcards found...
This is on maverick.
I installed "Theocracy" on my 9.10 Karmic system. The installer asks for a sound device, dev/dsp is the default and I didn't change it. When I now try to start the game, I get the following error:
Unable to open sound device: Device or resource busy
Aborted
Execution of /usr/games/theocracy_base/theocracy.real failed!
What is the sound device when using PulseAudio on Karmic?
I don't have any sound in my external device (TV). I'm attempting to watch a movie on the VLC player but I can't seem to get the sound to work through my television speakers! They are coming out of my computer speakers just fine though.
View 5 Replies View RelatedI delete input device. How to fox it? All the sound is working only microphone problem.
View 2 Replies View RelatedI have tried many, many things to try to get the sound card recognized since upgrading from Mint 8 to Mint 9, and have still been unsuccessful...all modules and up to date and alsa was rebuilt this morning (to insure I didn't mess something up with my prior attempts to resolve). I have only been using Linux for about a month now, and really don't want to have to go back to Windows
Here is a link to my latest hardware and troubleshooting info:
http://forums.linuxmint.com/viewtopi...302076#p302076
Can someone on this forum please assist?
i know skype on Linux is crap but i have no choice as i now have only Ubuntu installed on this pc & I NEED SKYPE.so with the new version how do i select a particular sound device.i ask because skype only lets me select a specific sound 'platform' (pulseaudio).i have a motherboard with on-board sound & a USB voip phone (us robotics) and it the usb voip phone i want to use solely for skype
so is there something i can tell pulse audio that i want skype to ONLY use the usb phone or do i have to use the stupid sound preferences to change the system wide device to the usb phone which makes the whole thing a hindrance because i have no idea when someone calls me & when i have to quickly change the settings then turn off music then try to answer the call the person calling has gone!!!i like to have music playing in the background out of my hifi & the error noises come out of the usb phone as well when this is selected & to be honest it makes having a pc setup with multiple devices pointless and a hindrance
I have got my headset connecting to the system using the BlueMan interface. When I first did this it gave me a error about not being able to put the sound on-top of 'pulseaudio'. Well this well about the last straw between me and Mr. 'PulseAudio', so away he went. I removed the demon via this instruction. [ubuntu] Safely Remove Pulseaudio?
I then tried connecting to my bluetooth headset again, no errors. But the bluetooth sound device does not show up in any mixer, or application. What else do I need to do to get this working again. I know my hardware is fine, it used to work in the previous version of Ubuntu and it all works on my wifes Windoze XP computer.
i am using ubuntu studio karmic and i have a digitech vx400 audio effects pedal which serves as an audio in/out midi in/out device via usb. i can sucessfully set it as the system sound device in system>preferences>sound for both input and output. but, when i play audio through it it only works for a few minutes before the sound stops completely. if i leave the system settings set to the internal sound card and configure jack audio connection kit to go to the usb device, i get the same results on the usb sound. a few minutes of playback at the most.i can restart sound with either "pulseaudio --kill && pulseaudio --start" or "alsactl init" in either situation. just requires restarting the programs. same results after restarting. i think this is alsa related as i have both the system sound and jack using the alsa driver, but i don't truly understand the relationship between pulseaudio and alsa.
View 5 Replies View RelatedI have updated my Ubuntu to Lucid 10.04 from 9.10.
Although my sound disappeared in 9.10 only, I thought maybe upgrading might help, but there is no change.
I guess everything is installed fine.
But still aplay -l command shows "NO sound cards.. "
Moreover the sound preferences shows no hardware, no input and a dummy stereo output.
I have banged my head a lot trying various things written in forums and all but no success.
One more thing : When I test "osstest" , I get sound in both the earphones , but altogether there is no sound. I am very much confused.
I have two sound cards active on this machine and they both work fine. However I would like to blacklist one card from being used for audio capture in KDE, because I am already using it outside of KDE for timed recording. The problem is that when I start amarok while timed recording is going on, it attempts to probe the card and this causes the recording to abort.
In Configure desktop > Multimedia, I can see the two cards. I can alter the priority but the Remove button is greyed out. So I can't remove a card from phonon.
Searching around for where phonon stores its configuration led me to ~/.config/kde.org/libphonon.conf. This certainly looks like the info I was trying to edit, but it's encoded in some way code...
I just installed Ubuntu 9.04 on my laptop then immediately upgraded to Karmic 9.10. Pulseaudio installed by default. There's no sound although the mute button is not checked and the volume slide control is at medium. lspci gives:
00:14.2 Audio device: ATI Technologies IXP SB4x6 Hi Definition audio controller (rev01)
System >Preferences >Sound >Hardware tab: blank window "choose a device to configure" Output tab: "dummy" output stereo
So, it appears that somehow the audio device controller in my laptop is not recognized or its driver disabled, possibly by pulseaudio. Sound works fine in Windows 7 part of this dual-booted laptop.
I was having issues with the mic or line in on my onboard sound card, while trying to get my tvtuner patched in, later I gave OSS a try, I could not get it to work and decided to go back to Alsa, now my soundcard is not functioning.I have followed quite a few different guides, one of which is the sticky, please forgive me for not remembering which guides. I'm going nuts over this.As you can see below it looks like it is still using the oss driver.
uname -a
Linux freekbox 2.6.31-21-generic #59-Ubuntu SMP Wed Mar 24 07:28:56 UTC 2010 i686 GNU/Linux
aplay -l
aplay: device_list:223: no soundcards found...[code].........
I encounter many problems, the most pressing now is the lack of my Ubunto-PC to make use of my M-Audio Delta 1010 LT Soundcard. I installed ALSA package yesterday, but there's still no sign of my Soundcard to be found. sudo aplay -l delivers: aplay: device_list:223: keine Soundkarten gefunden ... (no soundcards found)
[Code].....
my computer is connected to my TV through HDMI using ATI HDMI output. I have written a small script to switch display from monitor to TV when a want to watch a DVD, but I didn't find how to switch sound from speakers to HDMI in command line. For the moment I have to open KDE system settings -> Multimedia and move sound devices by hand.
View 3 Replies View RelatedI have a Dell Inspirion 5150. The onboard sound card was blown 3 years ago. OS is Ubuntu 8.10. I am also a HAM radio operator and use the computer for digital modes using a USB device that acts as an external sound card modem for me.
The program that I use for that is fldigi. The device is Signalink USB by Tigertronics. the device has the ability to have speakers plugged in to it. Question: Is there a way to have the computer send the audio out the USB cable to the device?
I have looked at my sound settings and there are USB devices but none of them are the one(s) that I use with my Signalink device. If it can't be done, no worries -- have not really needed it so far. Just something nice to have.
I have detected some problems when I try to record sound in my Kubuntu 10.04 system.
The problem is that the "default" device for audio recording does not work but I have to select another device to do so. I always selected the "default" device for audio recoding but currently I have to select hw:0,2 device.
Another odd thing is that different programs show me different device. For example, Audacity shows me that I have the following audio recording devices:
- HDA Intel: ALC888 Digital (hw:0,1)
- HDA Intel: ALC888 Analog (hw:0,2)
- spdif
- default
The only one that works is hw:0,2.
But arecord shows me (when I execute "arecord -L") the following:
Finally, in KDE system preferences for audio I get that I have 2 different audio devices for audio recording:
- HDA Intel (ALC888 Analog): it is said that it will try first x-phonon (CARD=0, DEV=0) and, if the latter does not work, it will try plughw (CARD=0, DEV=0)
- HDA Intel (ALC888 Digital): it is said that it will try first x-phonon (CARD=0, DEV=1) and, if the latter does not work, it will try plughw (CARD=0, DEV=1)
Where is the hw:0,2? and how can I set the alsa system to use hw:0,2 as the default device for audio recording?
All of that would not be a problem but I also have an ubuntu 9.04 installed on a virtual machine (by using virtualbox) and audio recording doesn't work there. I suppose that it is becase of the virtual sound card is using default devices for playing and recording audio.
I must say that audio playback works fine in both host and guest systems. It is just audio recording.
My USB sound card used to work perfectly, but after i unplugged it, there seems to be a problem. When it is unplugged it is in the multimedia device preference list, but it is greyed out. When i plug the sound card in, nothing happens to the greyed entry, instead a new device shows up with the same name.
When press test on the new entry, it works fine, but it's like pulseaudio dosn't recognize the USB sound card, and the sound just comes out of the internal speakers. Also, if i move the new entry up in the list, it has none effect at all. Sound still comes out of the internal speaker. Does anyone know how i can fix this?
I have a webcam that don't work with cheese ("no device found"). cheese works with an other camera, so it's not the problem. Googl says the cam should work ([all variants] Alcor Micro Corp. webcam just works - Ubuntu Forums), if the usb numbers mean anything dmesg gives this:
[code]...
For those that use Virtualbox on their slackware host and have a windows (xp) guest running. I have tried various settings for sound (Alsa, PulseAudio), the AC97 drivers are installed in the Windows xp guest os, but there is no sound and there is an unknown audio device (in the windows device manager). If I remove the AC97 drivers and use the soundblaster16 drivers in the Vbox settings there is no unknown sound device, but there's still no sound. why I can't get sound working?
View 13 Replies View RelatedIn a nutshell, our RAID 1 array was rendered broken and we were advised that core lib files were missing and the OS needed to be reloaded... a quote from our server host:"The OS is not healthy.This server will need a reinstall.
Libs are missing." This was after having replaced what we though was a faulty /dev/sdb. So they reloaded the OS (Debian 5.0.2 x86_64) on 2 FRESH drives, and installed the old /dev/sda as /dev/sdc once the reload was completed. Here's the output of /etc/fstab on the fresh install so we know what we're working with:
Code:
debian:/BAK# cat /etc/fstab
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
[code]....
The one problem I see myself running into is /dev/md1 and /dev/md2 are currently in use by the new system, so I cannot mount it there. I should also note, reloading the OS is a viable option if needed as we haven't started configuring the server yet. So if we need to reinstall the OS and assign the NEW RAID arrays to something other than /dev/md1 and /dev/md2 then we can do that.
I used to watch and record TV in Vista and Win7 with a SAA7134 capture card, and all worked fine. Using TVTime in Ubuntu 10.10 64bit (no upgrade but fresh install, everything up-to-date), I get picture but no sound. Instead I get this error message when running TVTime from the terminal: Can't open device /dev/mixer, mixer volume and mute unavailable.Using lspci in terminal lists the card as following:
Code:
02:01.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
And dmesg outputs this:
Code:
[ 16.078404] saa7130/34: v4l2 driver version 0.2.16 loaded
[ 16.078458] alloc irq_desc for 17 on node -1
[ 16.078460] alloc kstat_irqs on node -1[code]....
Being rather new to Linux (oh great, another newbie ) I don't know what additional info you might need, but I'm more than happy to post everything neededd - provided you tell me how to get that info.
I was testing a bug in F12+Acer Aspire One and its 'suspend' feature (you can probably find the thread) and I ended with my SDHC card messed up. I formatted it as ext2 (or ext3, don't remember exactly) and apparently its superblock got corrupted. For one thing there is a single file I want to recover from the card (I don't mind formatting it afterwards). I am no expert using e2fsck or fsck, that's why I am asking here. In addition I used the "dd" command to create a backup of the drive in a file (so I can start tinkering with it). What is the best course of action to recover my files? Either from the card or from the image?
View 3 Replies View Relatedmy computer after being updated a few months back lost its ability to make noise. the sound and volume settings see no input (i have an internal mic) or out put (speakers) hardware. they see no sound hardware at all. im running this on a sager so im assuming its an intel HDA audio thing. is there a package where i could report this bug?
running ubuntu 9.10 64 bit
When I try to playback a sound file in aucadity just after having played one in rhythmbox or totem or vlc (or presumably any other media player), I get the following message :
"Error while opening sound device. Please check the output device settings and the project sample rate."
When I try again 2 or 3 seconds later, playback works fine. In fact if I wait 2 or 3 seconds after having stopped playback in rhythmbox or totem before starting playback in audacity, audacity doesn't give me the error message at all. Just wondering what causes this delay (as there are no delays when I go from rhythmbox to totem or vlc or anything else).
I have a Dell Vostro 3300, i5 460 processor with a NVIDIA 310M Graphics Card. I'm doing a KUBUNTU 10.10 (Maverick) install with the following results. The Live CD boots just fine to, "TEST," or "Install." Installation goes fine. However, the graphics card being used is the Intel i915. I have tried installing the NVIDIA drivers directly from the, "Additional Drivers," tool and after the reboot I get through the boot screen to the console. I try to manually startx and I get the errors, "no device found," "no screens found." The second install I tried purging and blacklisting the nouveau drivers and entering safe mode. Then using apt-get install nvidia-current. After that, nvidia-xconfig. Same results.
The third attempt I re-installed and this time downloaded the drivers from the Nvidia site (version 256.53). Blacklisted nouveau, remove all nvidia, updated initramfs, etc. The install went fine however I still end up at a console after boot with the same messages as above. No device found, no screens found. I've tried searching through the forum and web and have tried things like adding the modset option along with many other hacks, tips and fixes. still, no go.I can live with the Intel graphics for now although I lose 512MB of memory. Unfortunately there is no way to disable or change this set-up in the BIOS. I've seen quite a few bug reports at Launchpad:
1. Is this something I should just wait til a fix comes? Will a fix come?
2. Is there, or will there be an official Updated Ubuntu Guide for Maverick to install NVIDIA drivers with this tecnology?
3. Lastly, is there anything else I should try??