my computer after being updated a few months back lost its ability to make noise. the sound and volume settings see no input (i have an internal mic) or out put (speakers) hardware. they see no sound hardware at all. im running this on a sager so im assuming its an intel HDA audio thing. is there a package where i could report this bug?
running ubuntu 9.10 64 bit
Playing a song works at first; then it quits after 1-5 minutes. If you select a different output device, it will work for another 1-5 minutes, but switching back to an already used up device will not play sound. Running 'sudo killall pulseaudio' resets everything and each output device works for another 1-5 minutes. This is on on 9.10.
Code:
lspci -v
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: EPoX Computer Co., Ltd. Device 4002
[code]....
I hear no login sound when I login to my ubuntu. I checked at startup applications and found GNOME login sound is enabled. The command used there is
Code:
/usr/bin/canberra-gtk-play --id="desktop-login" --description="GNOME Login"
.
Its not only this, but there is no other sounds enabled - for mouse clicks etc
The sound stopped working on my Macbook Pro 1,1. It was working fine before, and I can't think of any changes I made that would make it stop working. I know it's not a hardware problem because the Apple sound plays when I turn on the computer. Everything is unmuted in ALSA Mixer. None of the hardware options in Sound Preferences produce sound. Plugging in headphones or speakers does not solve the problem. I'm using 10.10.One curiosity: Whenever I do something that would normally cause sound to play, the optical audio red light in the headphone jack turns on, but no sound plays.
View 2 Replies View RelatedJust installed an Asus Xonar DS sound card. Installed the latest ALSA 1.0.23 drivers. The new drivers see my sound card just fine:
Code:
aplay -l
**** List of PLAYBACK Hardware Devices ****
[code]...
I was just using the mic and watched it stop working suddenly. I was in the middle of a skype test call when the graphical mixer level died down to zero in the middle of the call. When the test call was played back, the first part sounded fine then the sound got lower until it became inaudible. Since then I can't get any sound from my mic in skype.
Also, the audio input level graphically shown in Sound Preferences shows no fluctuations in sound as it used to before. The input device is enabled. I tried using Sound Recorder to record some sound clips and that worked fine. So the mic is working but Sound Preferences and Skype seem to have the mic level really low. I'm not sure what else to think considering it was working perfectly a few minutes ago. I've tried restarting, but that didn't fix it either.
After installing an external sound card, Im having some weird issues. The cards chipset is fully supported by suse, (CM8738) so I dont think thats the problem. Besides, I'm getting sound, but not in some applications. The system's sounds work just fine (login, logout themes) amarok plays without any problems, kaffeine, mplayer they all work flawlessly, in fact I can see the difference in quality between the onboard sound and my new card. However, no web browser is able to play any sound at all, firefox, opera or chrome, nothing,zip. Plus, vlc cant reproduce sound either, nor can smplayer.
I've tried switching channels on and off(muting)in kmixer and in alsamixer, on the console, with no results. I disabled the onboard audio on the bios before installing the new card, however my ati video card has integrated sound, which I cant disable.... I used to get this exact same problem randomly with the onboard sound, but I just had to go to kmixer and turn up the "pcm" channel volume, which was set to 0, and I had sound again on my browser. However this card's pcm channel is at max and turning it up or down affects the whole systems volume, not just the browser's. Is it better to just reinstall the sound system, if so how could I do that.
I bought a Diamond Xtreme Sound 5.1 sound card because I had read online that this card was a good choice with Linux and came with universal driver software. I installed the hardware correctly (as it works with WinXP) but I'm not able to get it working with Ubuntu.
View 1 Replies View RelatedUp until about a week ago using Kubuntu 9.10, the sound on this computer was fine, but now every day when I turn the computer on I have no sound and I get a notification from Phonon saying:
The audio playback device NVidia (ALC883) does not work.
Falling back to.
If I turn the computer off and then back on, sound is working again. code...
tried to install linuxant drivers which failed and then I uninstalled it. Now sound does not work, installed alsa backports again, installed alsa, alsautils again as well. no luck.
aplay -l
aplay: device_list:235: no soundcards found...
This is on maverick.
I've ran the Hardware Drivers, as sound is not there at all, and video is on low graphics and colors are awful....... It's found nothing, so I've gone to the ECS Website and got the names of both.Graphics:� Integrated Chrome9� HC IGP� Share Memory: Maximum up to 256MBAudio:� VIA� VT1708A 6-channel High Definition audio CODECI'm running the P4M900T-M2 (V1.0) motherboard.Linux is 10.4 Lucid
View 3 Replies View RelatedI have installed a wrong driver few days ago from
http://ubuntuforums.org/showthread.php?t=540296 code...
I'm new to ubuntu, just knowing little about it.
You can ask for more information for my computer
How can I recover the sound ?
I have tried many, many things to try to get the sound card recognized since upgrading from Mint 8 to Mint 9, and have still been unsuccessful...all modules and up to date and alsa was rebuilt this morning (to insure I didn't mess something up with my prior attempts to resolve). I have only been using Linux for about a month now, and really don't want to have to go back to Windows
Here is a link to my latest hardware and troubleshooting info:
http://forums.linuxmint.com/viewtopi...302076#p302076
Can someone on this forum please assist?
My sound card isn't being found on F13, it's a VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60). I ran alsa-info and posted it to the following url:
[URL]
I've had these problems before intermittently and it was working until I rebooted recently. I've also attached my yum log if there was something updated that affected it.
My sound stopped working.
Code:
$ aplay -l
aplay: device_list:240: no soundcards found...
But:
Code:
$ sudo aplay -l
**** List of PLAYBACK Hardware Devices ****
Home directory /home/georgii not ours.
card 0: Intel [HDA Intel], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
Same with alsamixer:
Code:
$ alsamixer
cannot open mixer: No such file or directory
But:
$ sudo !!
shows me the mixer.
Anyway, the sound is just gone. When I do: .....
It says: "PulseAudio seems to have crashed. Do you wish to report a bug?", then crashes.
I can't get the sound to work. The soundcard doesn't seem to be corrupted (works on both Hackintosh and Windows 8 ), but it looks like alsa won't recognize it on Debian:
aplay -l
aplay: device_list:268: no soundcards found...
I am using debian on kernel 2.6.38-2-amd64 with Kde 4 and I have one sound card integrated on my mother board (Asus A8N32-Sli Deluxe) with Nvidia CK804.
Often when I start debian I get a message that sound card wasn't found, therefore from the Konsole I have to reload the as:
xxxx@debian:~$ sudo alsa reload
Unloading ALSA sound driver modules: snd-intel8x0 snd-ac97-codec snd-mpu401 snd-gina20 snd-pcm-oss snd-mixer-oss snd-mpu401-uart snd-pcm snd-seq-midi snd-seq-midi-event snd-rawmidi snd-seq snd-timer snd-seq-device snd-page-alloc.
[Code].....
I am trying to get RHEL4.7 work fully on a dell precision t1500. Everything is working fine except for the sound card. in the specifications it says it has an "integrated High Definition Audio (Rev 1.0 Specification) implemented with a two-chip audio solution comprised of the ADI 1984a High Definition Audio CODEC and the ICH10's integrated AC97/High Definition digital controller"
RHEL4.7 can not detect the soundcard. running system-config-soundcard return no sound devices were found.
lspci returns the following:
00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11)
00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11)
00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11)
[Code].....
I am running Slackware Linux-13.1. Recently I noticed that alsaconf has stopped working: when I run it all I get is:
Code:
However, sound works just as good as it did before I noticed the problem. The issue is present both with the generic kernel and with any custom compiled one.
Here is some diagnostics with the custom compiled 2.6.37:
Code:
Code:
I encounter many problems, the most pressing now is the lack of my Ubunto-PC to make use of my M-Audio Delta 1010 LT Soundcard. I installed ALSA package yesterday, but there's still no sign of my Soundcard to be found. sudo aplay -l delivers: aplay: device_list:223: keine Soundkarten gefunden ... (no soundcards found)
[Code].....
I am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies View RelatedI have been using Ubuntu as my main OS on my desktops for a couple of years now. Started off with a HP with a Creative Labs XiFi soundcard, but am now using a Dell with a Creative Labs Audigy. Sound worked perfectly on the Dell since a clean install (about 7 months ago). I turned it on a week or so ago, and no sound! Even the little sound indicator in the notification area has gone.
View 8 Replies View RelatedAfter installing I was not able to get many of the audio programmes to work. After some reading, I realised that this was probably due to jack not starting.
I was unable to get jack to start normally but have been able to get it started with the playback only option selected. Programmes that use jack now work, however there is no sound once jack has been started. The sound does work in other programs when jack is not started. Strangely, I only have to open qjackctl for the sound to stop, and jack is not even started. Initially I thought these problems were due to my sound card not being supported, but I believe that alsa support was added for the via 1708 codec at some point. I found that support had been added in a document showing the changes between alsa versions; however I cannot find the exact model listed as a supported sound card on the alsa site.
I believe that altering jack settings could fix the problem, as i have been able to get audio to work in hydrogen by selecting plughw:0 but there is still no sound in other programs. I have tried altering many other settings but to no avail, however I do not really understand the meaning of the settings that i am adjusting.
Does anyone know what settings to adjust or know something else that might fix this problem so that sound works once jack has been started?
Also, would programmes that use jack such as audacity, hydrogen, and ardour work with pulseaudio as the main sound server if I were to install normal ubuntu - it might be worth seeing if my soundcard works with the puleaudio sound server
if this helps, here is the error message received when jack does not start when the normal duplex option is selected.
21:24:04.867 Patchbay deactivated.
21:24:04.868 Statistics reset.
21:24:04.886 ALSA connection change.
Cannot connect to server socket err = Connection refused
[Code].....
also, when i open alsamixer in the terminal for some reason the headphone part is greyed out, even when the sound is working before qjackctl is opened.
I've got a custom compiled kernel, just built on Lucid 10.04 from the kernel sources.System works fine, except for sound.When I log in as normal user and try to play a wav file using.The sound file is being played, but I hear no sound.However, when I do "sudo -s" and become root, execute the same mplayer command then I can hear the sound.My Sound preferences shows no input device and only "Dummy Output" as output device.On the generic kernel as came with the Lucid 10.04 CD, sound preferences shows different devices.The strange thing is: when I compiled my custom kernel, I changed nothing to the sound options in the kernel config file.
View 6 Replies View RelatedI have no sound, is it possible to restore the default sound drivers/settings in 10.04?It was work well before except for one issue, I couldn't get mic in for Rosetta Stone using wine. I have followed so many howto's to try and get Rosetta Stone working and then my sound working again.I think this is my main problem I upgraded alsa to "alsa-driver-1.0.23". I could easily be wrong about that assumption though.I have a Dell XPS M1210Ubuntu 10.04 64bitI think this is my sound card, "lspci -v | less"00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)Subsystem: Dell Device 01d7Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at efffc000 (64-bit, non-prefetchable) [size=16K]Capabilities: <access denied> Kernel modules: snd-hda-intelBut I don't think it is being recognized,
$ aplay -l
aplay: device_list:223: no soundcards found...
$ arecord -l
[code]....
For a couple of days ago, maybe a week or two I beguinne to get a 'snap-sound' in my compurt sound, like an eletrick charge or someting. I comes with about a minutes period. I resently find out that it came from the center-speaker. I run Ubuntu 10.04 LTS and have this sound-card: 00:09.0 Audio device: nVidia Corporation MCP73 High Definition Audio (rev a1)
My speaker system is Logitech X-530 I have located the problem to center-speaker, but the snap-sound only disappear if I mute the center, not lower the input, in the GNOME ALSA Mixer. I have tried to disconnect the antenna to the analoge-TV-tuner. Has anyoe a similar problem, and a trick to fix it? I don't know if it's related to any recent update of the system?
Recently I have started using my netbook (Acer Aspire one D250) alot more due to travelling and I noticed that the mic didn't work. Headed to the Ubuntu forums and saw a thread about installing ALSA. So I did and now I have no sound. From what I can tell ubuntu is no longer picking up my sound devices but I'm sure. Hence why I am here. I need to get my sound working again (obviously) and then in turn get my mic working for mumble and other VOIP programs.
View 4 Replies View RelatedI have a fresh install of Natty and i'm having some issues getting sound to work. My laptop has a built in sound card which works just fine. However, i also have a usb 5.1 sound card which isn't working at all. Both devices show up in 'Sound Preferences' but when i select the 5.1 device as the output device sound doesnt work. I ran the alsa-info.sh script and the output can be found here.
View 4 Replies View RelatedStrange one. Just upgraded my mother-in-law's computer from 8.04 to 10.04 via the update manager. All seems to be working beautifully except ...
* When I run gstreamer-properties and do an output test I get a test sound through the headphones plugged into the front audio socket of the machine using the 'Analogue Headphones' setting in Sound Preferences. (This rules out dead headphones.)
* When I try to play audio through any app I get no sound through the headphones, but if I change the setting to 'Analogue Output' in Sound Preferences I get audio loud and clear through the speakers which are plugged into the audio socket at the rear of the machine. how the gstreamer-properties test is getting audio to the front socket I guess I'd be getting somewhere.
I am setting up a mythtv/xmbc box on Ubuntu 10.10 (natty does not install on my hardware). I have a Sabrent TV PCIRC tuner card, which seems to work fine with the proper card and tuner settings. My on-board sound is HDA-Intel surround sound, which I have configured as analog duplex.
Currently the sound works fine through my speakers plugged into any jack on the back of the PC (two speakers, one jack). I can watch ripped movies and listen to music. The TV tuner is pumping sound from its external jack -- if I hook it up directly to the speakers it works fine. I can feed the Tuner's sound to the line-in on my motherboard, but nothing comes out. In the sound manager, i have the input device selected and the input level shows that the sound is coming in through the connector, and I can test the speakers and they work fine, but they don't seem to be communicating that the sound coming in needs to be pumped out through the speakers.
