OpenSUSE Hardware :: NVidia Drivers Do Not Support Correct Display Resolution

May 31, 2010

I am new to opensuse and have installed 11.2 KDE. It is simply perfect for my system. However after the initial setup the display resolution was set perfectly fine for my 18.5" LED monitor, default resolution was 1366x768, and everything looked good from desktop to fonts but the OSS drivers didn't support compositing so I decided to switch to nvidia drivers. I installed the driver as shown in openSUSE repositories page, for my 6600GT card. Now after rebooting everything is stretched,even the fonts look really ugly and fuzzy.

I am unable to find any mode in Nvidia XServer settings that would correct the current ugly stretched display. I am unable to set 1366x768 manually as well, doing so my PC won't boot to KDM but rather sticks to console. Now it's for sure that my monitor and display card supports 1366x768 resolution but it's just that nvidia drivers/Nvidia XServer settings won't let me set that resolution. How can I set the resolution or even better if I can enable compositing using OSS drivers then that would be great an dm willing to switch back.

View 9 Replies


ADVERTISEMENT

OpenSUSE Hardware :: Screen Resolution With NVidia Proprietary Drivers?

Jul 26, 2010

I have an nVidia GeForce 7600GS with a dual monitor setup. A 19" Dell @ 1280x1024, and a 19" widescreen Acer @ 1440x900. The Dell is attached via DVI, and the resolution is detected properly, and set, but the Acer is connected via VGA, and so the native resolution is unkown to the nvidia control panel. It will only let me set the resolution up to 1024x768. I had it create the xorg.conf file, and i tried to edit it manually, changing its

[Code]...

View 9 Replies View Related

OpenSUSE Install :: Low Boot Resolution With Proprietary Nvidia Drivers

Aug 26, 2011

I've recently jump from the Ubuntu/Mint ship, and figured I've give a polished KDE distribution a shot. Of course I turned to OpenSuSE, and I love it so far. I've resisted KDE quite a lot since 4.x came out but it's really come along. Much better than the (in my opinion) monstrous disaster that Gnome has become.

Anyways, on to my problem: I've installed the proprietary Nvidia drivers via the one-click-install shown in the wiki, and that worked great. But now my resolution at boot - that is the boot/loading screen, not my desktop - is shown at a very low resolution instead of my native resolution, like it was with OpenSuSE's default open-source Nvidia driver, which I'm guessing is Nouveau. On Ubuntu, this was pretty easy to correct; all you had to do was edit /etc/default/grub and put your resolution there, and tinker with some other options so that instead of Plymouth trying to set its own, it just carries over Grub's specified resolution. But I can't seem to do that with OpenSuSE. For one, I don't see /etc/default/grub, and more than that, I don't think you guys use Plymouth. I could be wrong on that second point, though. So, how can I change the boot screen's resolution to my native resolution? I'm using the latest Stable release (11.4) and latest Nvidia drivers. Other than that, the install is new.

View 5 Replies View Related

Ubuntu :: Nvidia Missing Correct Resolution

May 31, 2010

My HP Laptop screen is 18.4 in diameter and the only two resolutions that work are the highest a 1920x1080 which is too small for me or 1360x768 which is perfect. That res is no longer available in the latest Nvidia driver.

View 9 Replies View Related

OpenSUSE Hardware :: Unknown Monitor After Installing Nvidia Drivers / Fix Display Settings?

Mar 9, 2010

I installed the nvidia proprietary drivers with click-install and everything perfect, I have desktop effects working but the problem is that when you open the config. screen settings to make sure everything was really good, I get to screen unknown April.

The maximum resolution is the correct 1440 * 900 for 19 "but the refresh rate by not recognizing the monitor down to 50hz me and gives me the option to 60hz as it was before installing the nvidia drivers.

How can I fix the display settings?

View 6 Replies View Related

Ubuntu :: Changed From The Proprietary Drivers To The Regular NVidia Drivers - Startup Logo Is Displayed At A Really Low Resolution

Jul 13, 2010

I installed Xubuntu the other night (completely wiped machine) and started doing all the updates on it. After a couple of reboots, I changed from the proprietary drivers, to the regular nVidia drivers. After doing this, the startup logo is displayed at a really low resolution. Is there a simple fix to change this and use the nVidia drivers as well?

View 1 Replies View Related

Fedora Hardware :: NVidia Not Displaying At Correct Screen Resolution

Mar 14, 2010

Code:
Fedora 12
2.6.32.9-70.fc12.i686
GEFORCE GO 7400

When my notebook boots I get a high screen resolution. However, when I login it seems to go to a lower resolution that is not clear. I think this all started when I updated to a new kernel. So I reinstalled the nvida drivers using leigh's guide. However, I still can't seem to get it to display correctly.

Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (mockbuild@) Sun Feb 28 14:49:02 EST 2010
# Xorg configuration created by livna-config-display
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection .....

View 7 Replies View Related

Ubuntu :: Stuck At Low Resolution W/nvidia Drivers?

Feb 27, 2010

I currently have an nvidia 8600 gts w/nvidia restricted drivers and I cannot seem to change the resolution to anything higher than 640x480. Everything used to work perfectly w/the restricted drivers however I downloaded an update and it screwed everything up.

I have tried to edit my xorg.conf file but it seems that either i'm doing something wrong or the nvidia drivers are simply ignoring that file. I tried reverting back to the older versions of the drivers and that didnt seem to work. I tried installing the newest version of the nvidia drivers and that didnt work either. below is my xorg.conf file

[Code]...

View 4 Replies View Related

Ubuntu :: NVidia Propriety Drivers Cause Low Boot Resolution?

May 15, 2010

I have searched all over the internet for a solution to my problem but I have never found one and it is really frustrating me. Basically when I installed Ubuntu 10.04 on my laptop everything works fine other than extra desktop effects because obviously graphics drivers or not installed yet. All of this is fine and the boot up screen is at my native resolution 1366x768 or something very close and it looks really nice.

The main problem I have is that as soon as I install my graphics driver for nVidia G105m card for some strange reason the boot up screen becomes a very strange resolution and appears to become very glitchy and it is really bugging me. Instead of the boot screen having a nice purple background and the loading bar and word Ubuntu looking nice and smooth it because large pixelated and every time I boot a big green square flashes during the boot up screen.

This problem goes away as soon as I remove drivers but then obviously I lose desktop effects and then that is just as annoying. Now my question is, is there anyway way I can either fix my low boot up screen resolution or is there another way in which i can enable desktop effects without installing my drivers?

View 3 Replies View Related

Ubuntu :: Resolution Won't Go Higher Than 640x480 With Nvidia Drivers?

May 24, 2010

I have a FX 5200 and a 26" TV with VGA input which supports 1330x760. No problem with this in Windows, but in Ubuntu, as soon as I install nvidia drivers (175) resolution goes 640x480.

I've tried editing xorg.conf in several different ways, but resolution didn't change, maybe I was doing it the wrong way.

PD: 10.04 Lucid Lynx fresh install

View 1 Replies View Related

Ubuntu Installation :: NVidia Drivers Causing Resolution With Terminals?

May 2, 2010

You know, the "ctrl+alt+F5" type things, where you go to those pure command lines? I installed Ubuntu 10.04 from scratch, and everything was working great! Good resolution, etc. When I booted up my computer, the (very brief) splash screen fit the entire resolution of my monitor (1680x1050), and the X server did the same.

When I'd go to one of those 'tty' terminals, I was surprised (in a good way) to see that they had scaled to my monitor's resolution as well. I was looking forward to using that. Well, time came where I wanted to turn on Compiz, so I downloaded/installed the nVidia drivers. Well, they work. I can work with Compiz and 3D games at full speed and full resolution in Ubuntu, and I have zero complaints about that.

What I do have a complaint about is that the terminals (tty5, in the above example) are back to that old resolution, 640x480 I believe. Also, that brief splash screen is at the same horrible resolution, instead of the full resolution I had on the old nVidia driver that didn't support 3D effects.

Is there a way to get that back? Is it a bug or a glitch that it's no longer scaling the tty's to my display resolution, and do I just have to wait for an update?

View 3 Replies View Related

Ubuntu :: Poor Resolution During Boot After Installing Nvidia Drivers

May 17, 2010

I have a HP dv6314tx laptop with Nvidia Geforce Go 7400 graphics card. Recently I installed 10.04. Without installing any nvidia drivers my boot screen resolution and desktop resolution were fine. But I cudn't activate Extra Visual effects and so I installed nvidia drivers. Now the problem is that Extra visual effects work just fine. But during the boot, the splash screen has a very poor resolution.

View 2 Replies View Related

Ubuntu :: Changing To A Custom Resolution For HDTV Using NVIDIA Drivers

Jul 17, 2010

I have a Philips 19' HDTV I use as my monitor, I have tried every guide out there, including the wiki one with xandr. Nothing works for me. This seems like it should be way easier, set custom resolution go.. but this isn't the case.

Using Ubuntu 10.04 -

I've tried editing the xorg.conf and adding the modelines and changing the modes , I've tried the xandr commands. I've tried guides from years ago to current ones. I'm desperate, Everything is cut off like maybe an inch not even. Can just barely see the edges of the top and bottom bars.

I've been working on this for many many hours coming up with nothing every time. I wish there was a way to just resize the desktop.

Here is my most recent attempt at the conf file.

Quote:

View 3 Replies View Related

Ubuntu Multimedia :: Override Nvidia's Display Resolution Selection

Jul 27, 2010

Recently I encountered a problem with a triple-monitor setup where the EDID was rejected by the nvidia driver (version 195.36.0, claiming that the EDID checksum was invalid. The maximum resolution that the driver would allow was 640x480. Searching through the X logs (/var/log/Xorg.0.log), I found the following message:

Code:
(WW) Jul 26 21:37:57 NVIDIA(GPU-0): The EDID read for display device DFP-0 is invalid: the
(WW) Jul 26 21:37:57 NVIDIA(GPU-0): checksum for EDID version 1 extension is invalid.

[Code].....

View 3 Replies View Related

Ubuntu :: Nvidia 9600gt : Resolution Stuck On 640x480 With Proprietary Drivers

Oct 20, 2010

I have a BIG issue with my fresh Maverick install : when I install proprietary drivers via the graphic utility, either one proposed, the screen resolution is then max in 640x480. But I have hardware acceleration and compiz effects !

I tried, I think, everything. Forcing the resolution in xorg, in monitors.xml, try the newest ones via the ppa, install an older (and used to be working I'm positive) one with .run (which just prevent any graphic display).

View 9 Replies View Related

Ubuntu Multimedia :: Incorrect Screen Resolution After Installing NVidia Drivers?

Mar 25, 2011

I know there are a lot of threads out there for same or similar issues, but nothing I found was working for me until, by sheer chance, I found this very simple solution on the Fedora forums. Too elegant not to share.Environment:Ubuntu 10.10nVidia GeForce 5500Samsung SyncMaster 225BWUsing DVI cable (in case it matters)Issue:After installing the proprietary nVidia drivers, the screen resolution was no longer the correct native resolution of the display. In my case specifically, the nVidia X Server Settings utility was detecting the maximum supported screen resolution was 1280x1024 while my display's native resolution is 1680x1050.Solution:Open a Terminal window.Make a backup copy of the original xorg.conf file. This is just good form any time you are making config file customizations.

Code:
sudo cp -p /etc/X11/xorg.conf /etc/X11/xorg.conf_backup
Open 'xorg.conf' in a text editor.

[code]....

View 1 Replies View Related

Ubuntu :: After Installing The Drivers For NVIDIA Video Card It Changed Resolution?

Apr 11, 2011

I reinstalled my computer with Ubuntu 10.10 and the resolution was fine. I turned off my computer last night and when I turned it on today it's back to everything being huge and the screen resolution being 640 x 480. Then when I try to change it, it says my video card isn't supported. All I want to do is revert back to my stock video card in my computer and remove the nvidia one since obviously ubuntu isn't working with it.

View 9 Replies View Related

Ubuntu :: No Display On Screen After Upgrading Nvidia Drivers?

Sep 26, 2010

Recently I upgrade to the latest Nvidia driver for Linux. I checked that it was compatible with my Ubuntu 10.04 x64 system and my geforce gt 220 graphics card. I decided to go with the newest beta ver 260.1904. Installation went well, better actually than other times I tried to install the newest driver from their site. After installation was finished I restarted and let my system load up. As soon as it got past the ubuntu logo, the screen just went blank as if there was no signal.

I determined that everything but the display was working. When I pressed ctrl-alt-F1 the numlock light turned off (this usually happens) and was still toggle-able. When I went through the other x-servers (ctrl-alt-(F2-F6)) the light went out but could be turned off and on by hitting numlock. When booting in from recovery mode, the screen displayed up to the point where it would show recovery options with no noticeable error showing before the screen turned off. This is what worries me the most.I don't think it is my Xorg.conf because I replaced with a backup and still have the same problem.Does anyone have any ideas about why this is happening or how I can at least see the terminal. As a side note, its definitely not the card because the card worked fine before, works in windows and live cds, and I tried with an older nvidia card and had the same problem.

View 3 Replies View Related

Fedora Hardware :: Setup Nvidia On Geforce 5700LE - Monitor Doesn't Support Screen Resolution

May 13, 2010

First off, let me say: I'm a long time Linux hobbyist and recently installed Fedora 12. I've been looking (some say "lurking") around these forums for a bit after I loaded it up and let me say: Leigh, You're an amazing young man! Keep up the great work! I've a question: I've just put together a hobby computer: Pentuim 4, with 1 Gig of RAM and a Nvidia Geforce5700LE. When I install Fedora from a fresh install, everything works great: nice screen resolution, good graphics, etc. but no 3d or acceleration, so I'm very limited on my programs.

So I decided I need to upgrade my Nvidia driver. I followed Leigh's Nvidia setup guide after installing Fedora 12 (all four steps!) everything seemed to go fine, but when I reboot, I quickly see the Nvidia splash screen, but the screen then goes blank. Well, not really blank, I can see what appears to be a kind of cross-hatch pattern, plus I can see what should be my mouse cursor on screen (it also is a square shaped pattern). I suspect it may be at a screen resolution that my monitor doesn't support. Once there, the computer pretty much doesn't do anything else. Usually I can break into the x driver loading and go to the command prompt, but this latest time I can't even do that.

View 10 Replies View Related

OpenSUSE Hardware :: 11.4 - How To Get Correct Monitor Resolution

Jul 8, 2011

I tested OpenSuse 11.4 as a guest OS via virtualbox on a win7 32bit host. Output to my 16:9 screen was perfect with a plentiful choice of high resolutions. Now with Suse (32 bit) properly installed as the host the only resolutions are 1024X768 and below and I am stuck with 4:3 ratio. My PC is an Intel Atom D945GCLF2 which has integral graphics. The monitor is the VGA input of a Samsung TV.

View 9 Replies View Related

Ubuntu :: Wrong Screen Resolution At Startup After Installing NVidia Legacy Drivers

Jan 8, 2011

I just installed drivers for this nVidia GPU from the website. Now, whenever I boot, the screen resolution goes to 1024x768 instead of 1280x800 like I want it to. I have to change the screen resolution every time I boot into Ubuntu.

View 5 Replies View Related

Ubuntu Installation :: Installing And Updating NVidia Display Drivers

Feb 28, 2011

I just installed Ubuntu last night parallel to windows vista ultimate (no problems). My biggest problem is that when I tried to install the nvidia display drivers, I somehow downloaded a server based driver (and am having amazingly difficult problems). I use a dual monitor set up (both are plug and play LCD displays) and i'm not too worried about aesthetics but rather, performance. I downloaded the correct driver but now I don't know how to install it. Is there a way to uninstall this server driver?

View 1 Replies View Related

OpenSUSE Hardware :: NVIDIA GeForce GT 325M And NVIDIA Optimus Support?

Apr 3, 2011

I own an ASUS N61JV-X2 notebook PC that has an Intel HD IGP, nVIDIA GeForce GT 325M GPU, and nVIDIA Optimus technology. I am running OpenSUSE 11.4 64 bit with GNOME. I used to be a former Ubuntu user. I used Ubuntu 10.10 Maverick Meerkat 64 bit. In Ubuntu, it was not recommended that I install the proprietary nVIDIA binary drivers because it would cause me to log into a TTY console upon reboot.

nVIDIA states that they have no plans to support Optimus technology in Linux at any time. Would it be recommended that I install the proprietary nVIDIA binary drivers in OpenSUSE 11.4 64 bit with GNOME? Will I get the same problem as in Ubuntu? How do I do this?

View 1 Replies View Related

Ubuntu :: Multiple Screen Images On Display After Installing Nvidia Resticted Drivers?

Jan 11, 2010

I have a Compaq Presario CQ60 laptop with an Nvidia 8200M graphics card. When I try to enable visual effects I am asked to install the Nvidia restricted driver. When I do this and reboot, I get 6 copies of the Ubuntu screen on my display. Does anyone know what is causing this? I'm not sure which version it installed, I assume either 173 or 185. I have downloaded version 190 from the Nvidia web site. Should I install that version? If so, it is a .run file, how do I install it?Also, how do I reinstall the old driver. I fixed the problem this time by reinstalling Ubuntu, but that will get old if I have to do it too often.

View 4 Replies View Related

OpenSUSE :: Running A Nvidia Gtx260 And Have Installed Nvidia Drivers For Series 6 And Up?

Jun 9, 2010

opensuse 11.2 ,my monitor keeps going to sleep or somthing and this is a problem when im watching videos,ive set screens power setting but they dont seem to be whats doing it.im running a nvidia gtx260 and have installed nvidia drivers for series 6 and up.dont know if its the divers or somthing else.

View 9 Replies View Related

OpenSUSE Install :: Update From 11.2 To 11.4 - Unable To Get Correct Display Using Zypper Tool?

Jul 10, 2011

I used the zypper dup tool to upgrade my HP Pavilion dv6000 laptop and my display is now broken into columns and partially obscured. I can barely see anything on it. When I ran zypper it stopped about half way and locked up.I then ran it again to completion. At boot, GRUB gives me my startup options as before and is clearly readable with good resolution. When I select openSuse to start it, the screen goes blank for a few seconds and then comes back with the screen problems.

The problem continues all the way into KDE. I have approximately four columns displayed but I can barely see anything. Most of the lower half of what should be displayed is obscured so I cannot load any applications. If I right click, I can make out the dialog box and select the run command. From there I reran the zypper command using the 'zypper up rpm' option and it says "nothing to do" and the "highest update version is already installed."

The display problem also exists if I use the failsafe boot option. I remember having to download nVidia driver last year to get a better resolution, but 11.2 (64 bit) worked great until the repositories stopped working and I no longer was able to load software. Now I can't use the computer to download and burn a DVD version of 11.4. Again, I do seem to be able to use the terminal, so I could presumably fix something with it if I had the right commands and I do seem to have access to the repositories.

View 2 Replies View Related

Ubuntu Multimedia :: NVIDIA GeForce 8200M Ubuntu Drivers/Support

Jul 16, 2010

I installed Nvidia xorg drivers (not knowing it didn't support my card) and messed up my video setup. When I rebooted it wanted me to restore to default, so I did. Now that I have, I can do stuff, but I am trying to run some games in W.I.N.E. and it just won't run. I can't activate desktop-effects either. And to be honest, I can't find any information on the NVIDIA GeForce 8200M, I can only find info and support for 8200 and the 8200M G. otherwise I'll just have to reinstall.... And I just installed 10.04 yesterday.

View 1 Replies View Related

OpenSUSE Hardware :: Alternative For NVIDIA Graphic Card Installation Correct?

Jan 7, 2011

I am new to Suse Linux. So please excuse me for this "funny" query. have read the threads: Configuring graphics cards in openSUSE 11.3

From here I went to this page: SDB:Configuring graphics cards - openSUSE Its mentioned on this page that: Upon installing openSUSE, the X system's automatic configuration may have failed to properly configure the graphics correctly. Typically this results in either a black screen upon reboot, or the wrong resolution being displayed on the monitor.

I have none of these problems. But after searching for inability of desktop effects to become activated, I found that nVIDIA graphic card drivers are must for these effects. After clicking "My computer" icon on desktop, I found Display Info as following:

Vendor: nVidia Corporation
Model: G98 [GeForce 8400 GS]
2D driver: nouveau
3D driver: nouveau Gallium (7.8.2)

Can anyone tell me 'Is nouveau an alternative for nVIDIA'? Is this the reason for no wrong resolution or black screen upon boot. That means my computer graphics are working correctly. Then why does Desktop Effects are not getting enabled.

After searching for Kaffeine media player extra codecs to play media files, I incidentally found the following options: I opened Yast Control Center @ linux-o26a Software> Add on Products > installed Add-On Products > Community Repositories > clicking Next, this opened a window with "List of Online repositories" where there is an option of "NVIDIA Repository". If I install it, will it enable the "Desktop effects"

View 9 Replies View Related

General :: "nVidia Drivers Not Support"?

Sep 14, 2010

I am not able to download drivers for my nvidia GF 9400GT,I tried in nvidia website and it says:-We're sorry, the NVIDIA Smart Scan does not support your system at this time.Supported operating systems: Microsoft Windows 98, 98SE, ME, 2000, XP, 2003, Media Center, and Windows Vista.Supported browsers: Internet Explorer, Firefox & Netscape.=====is it nvidia hates linux flavors...

View 14 Replies View Related

OpenSUSE Hardware :: Does 11.4 Support Resolution 1366x768

Mar 27, 2011

I have had a lot of problems with my screen resolution 1366x768. So I am wondering does openSUSE 11.4 support resolution 1366x768?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved