Fedora Hardware :: NVidia Not Displaying At Correct Screen Resolution
Mar 14, 2010
Code:
Fedora 12
2.6.32.9-70.fc12.i686
GEFORCE GO 7400
When my notebook boots I get a high screen resolution. However, when I login it seems to go to a lower resolution that is not clear. I think this all started when I updated to a new kernel. So I reinstalled the nvida drivers using leigh's guide. However, I still can't seem to get it to display correctly.
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (mockbuild@) Sun Feb 28 14:49:02 EST 2010
# Xorg configuration created by livna-config-display
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection .....
View 7 Replies
ADVERTISEMENT
Feb 25, 2010
I installed ubuntu onto a desktop computer about a month ago. Everything was working well straight away, I had it outputted onto my TV (32 inch Hi Def Sharpe Aquos). The Graphics card is an NVidia Ge Force FX 5600. On installation and after a restart the computer detected the TV and actually gave the name of the TV in the settings automatically, in the system --> Administration Menu there is a programme that sets the resolution and settings for the NVidia card. This all sorted itself automatically and displayed in 1360 x 768 which was perfect on my TV. For some reason when I turned it on this morning it will only display in 640 x 480 or 320 x 240. xrandr only gives minimum of 320 x 240 and maximum as 640 x 480. How to rectify this?
View 3 Replies
View Related
Mar 10, 2011
I have some experience with Linux (mostly Ubuntu) but absolutely none with Fedora. In fact I have needed to re-install twice just to get to this stage. I now have a fully updated Fedora 14 Gnome desktop. I have (finally) got Nvidia graphics drivers up and running. I can open the Nvidia Settings screen and everything looks ok except that the desktop screen resolution doesn't seem correct. I have a Sony Vaio with default screen resolution of 1920x1200. In Nvidia settings it was set to AUTO, but I've changed that as root user to 1920x1200 with a refresh rate of 60 Hz and rebooted. My desktop looks quite good, but it's not 1920x1200 - maybe 1600x1200? Perhaps. How do I confirm the current resolution?
I have run
Code:
glx info | grep direct
and the output is
Code: direct rendering: Yes
GL_EXT_Cg_shader, GL_EXT_depth_bounds_test, GL_EXT_direct_state_access,
Which I presume is ok?
View 5 Replies
View Related
May 31, 2010
My HP Laptop screen is 18.4 in diameter and the only two resolutions that work are the highest a 1920x1080 which is too small for me or 1360x768 which is perfect. That res is no longer available in the latest Nvidia driver.
View 9 Replies
View Related
May 31, 2010
I am new to opensuse and have installed 11.2 KDE. It is simply perfect for my system. However after the initial setup the display resolution was set perfectly fine for my 18.5" LED monitor, default resolution was 1366x768, and everything looked good from desktop to fonts but the OSS drivers didn't support compositing so I decided to switch to nvidia drivers. I installed the driver as shown in openSUSE repositories page, for my 6600GT card. Now after rebooting everything is stretched,even the fonts look really ugly and fuzzy.
I am unable to find any mode in Nvidia XServer settings that would correct the current ugly stretched display. I am unable to set 1366x768 manually as well, doing so my PC won't boot to KDM but rather sticks to console. Now it's for sure that my monitor and display card supports 1366x768 resolution but it's just that nvidia drivers/Nvidia XServer settings won't let me set that resolution. How can I set the resolution or even better if I can enable compositing using OSS drivers then that would be great an dm willing to switch back.
View 9 Replies
View Related
Jan 16, 2010
New to ubuntu, as of about 3 days ago. Using ubuntu 9.10 on a Dell Dimension 3100. I installed ubuntu as a program on windows 7. I am only given the option for 800X600 and wanting to switch to 1024X768. My graph card is MESA DRI Intel 915G GEM 20090712 2009Q2 RC3/x86/MMX/SSE2 v1.4 Mesa 7.6. Other info: The X.ORG Foundation v1.6.4. How can I get the desired screen resolution?
View 1 Replies
View Related
Apr 8, 2011
I just got a DVI cable so I can have a dual monitor setup, (one VGA, one DVI monitor), and when the DVI cable is plugged into our 20" widescreen, the correct resolution (1680 x 1050), a "No Signal" error message will appear on the monitor. When the resolution is lower with the DVI cable, it will show up, but everything will be a bit bold and blurry. When I plug our VGA cable into the VGA slot in this monitor, everything shows up fine.
View 9 Replies
View Related
Jan 15, 2016
I'm using two screens where one Is cheep Denver TV screen with DVD player. I have just install Jessie on my PC. Before i had Windows and there was no problems finding correct resolution for this screen. Now Jessie recognize it as Unknown and the maximum resolution I can set is 1024x768 what is way to small even for this screen. At Windows resolution was something over 1200px wide. The worst thing about it is that this resolution stretches the display really ugly. You may think I'm making big deal of nothing but for me it is actually a deal. I'm graphical designer and I need to see display as it is.
View 7 Replies
View Related
Feb 21, 2011
I installed Squeeze with LXDE on my old 600MHz Celeron, 256MB ram computer. But, every time I boot, the screen resolution is wrong. I can set it right with a few clicks of the mouse, but next time I boot up it has reverted to the wrong setting. I found that this problem has been reported on the LXDE forum, but the official response seems to be that it is not their problem.
How do I get the correct setting to stick?
View 7 Replies
View Related
Jun 18, 2011
I just set up my dad's pc with Debian Sqeeze. It runs perfectly fine and after trying a lot of distro's Debian is the only one that will not crash or freeze up X. Now we're forced to using my own 17" monitor instead of his 19" wide screen since the max res is 1280 x 1024 in Sqeeze. What he needs is 1360 x 768. I found out in the wiki that xorg.conf needs to be edited. Since the file does not exist it needs to be created by running "Xorg -configure" in tty after stopping GDM. when running the "Xorg -configure" command this is the output;
" vmware: Please ignore above "FATAL: Module vmwgfx bot found."
(++) Using config file: "/root/xorg.conf.new"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Number of created screens does not match number of detected devices.
Configuration failed. "
It's an Intel Sandy Bridge integrated graphics chip. I've tried running "Xorg:1 -configure" as mentioned in a forum but that simply gives me a "unknown command" answer.
View 3 Replies
View Related
May 13, 2010
First off, let me say: I'm a long time Linux hobbyist and recently installed Fedora 12. I've been looking (some say "lurking") around these forums for a bit after I loaded it up and let me say: Leigh, You're an amazing young man! Keep up the great work! I've a question: I've just put together a hobby computer: Pentuim 4, with 1 Gig of RAM and a Nvidia Geforce5700LE. When I install Fedora from a fresh install, everything works great: nice screen resolution, good graphics, etc. but no 3d or acceleration, so I'm very limited on my programs.
So I decided I need to upgrade my Nvidia driver. I followed Leigh's Nvidia setup guide after installing Fedora 12 (all four steps!) everything seemed to go fine, but when I reboot, I quickly see the Nvidia splash screen, but the screen then goes blank. Well, not really blank, I can see what appears to be a kind of cross-hatch pattern, plus I can see what should be my mouse cursor on screen (it also is a square shaped pattern). I suspect it may be at a screen resolution that my monitor doesn't support. Once there, the computer pretty much doesn't do anything else. Usually I can break into the x driver loading and go to the command prompt, but this latest time I can't even do that.
View 10 Replies
View Related
May 7, 2009
HP Pavilion Media Center a1430n Desktop PC
Athlon 64 X2 (T) 3800+ 2.0 GHz
Asus A8N-LA chipset GeForce 6150 LE
1 gB of RAM
Video Graphics: integrated
Hipro hp-d3057f3r max out put 300w
Here is the problem fist i had a 8800gt installed it work fine until one time the card stop displaying on my screen and the card would make a fan sound like if was over heated......but my integrated still displays... ok then i send the card to my provider so it can be replace.. so they send me a 8800gts .... and i installed and deleted the old drives and even upgrade my bios .... but still happen like it happen whit the 8800gt it wont display any thing on my screen and also is making the same fan sound of the 8800gt ....
View 5 Replies
View Related
May 4, 2010
Excited at seeing the new features in 10.04, I clicked the Upgrade button tonight. I am now really regretting it! Problems:
1. My screen resolution should be 1280x1024 but the System>Preferences>Monitors control panel only shows 1024x768.
I think I have onboard Realtek graphics. Do I need to install proprietary drivers? Everything worked fine out of the box with 9.10!
2. The sound isn't working. Again I think I have onboard Realtek sound, and again it used to work fine without any intervention from me...
3. Although on first startup wireless networking was working fine, I restarted to see if that would solve the display issue, and wireless networking stopped working too!
I have an RaLink wireless card.
When I used Grub to choose 2.6.31.20, I got some error messages at startup (e.g. mount couldn't mount /dev), but then it did eventually start up and the sound and wireless networking are working again. But the resolution is still not fixed. It is now offering 1152x864, which it didn't previously, but no 1280x1024 (my screen's native resolution).
View 9 Replies
View Related
Feb 18, 2010
I have two displays: my main being an Apple Cinema Display (1920x1200), and my secondary being a Compaq W17q (1440x900). Previously all applications saw the secondary fine, being able to detect its name, native resolution, refresh rate, and so forth. But today, for no reason, after going into nvidia-settings the display is now being called "CRT-0" with only 4:3 resolutions available (1024x768 being the highest).
So now I'm stuck with the wrong resolution on my second monitor. All I can guess is that something more integral in Fedora is no longer able to read the EDID in it or something (I say integral as it's not just nvidia-settings, its everything, not to mention my install of Win 7 still reads the display A-OK)? Maybe I could just force the 1440x900 resolution? If so, how? Everything I've tried so far has either had no effect or resulted in glitch city.
View 1 Replies
View Related
May 19, 2010
This is a new 9.10 installation. Screen resolution by default is 800x600. I've installed the 1.85 nvidia driver, which correctly identifies my monitor as a Samsung 931b (or whatever). Nvidia's gui suggests a 1280x1024, which is just what I want. When I try to save the changes to xorg.conf, I get a variety of errors, including (but not limited to) "...error parsing xorg.conf..". I've chmod 'ed the X11 directory, and the xorg.conf* files in it to 777, I end up with 1280x1024 until a reboot, after which I get 800x600 again (arrgg!).
Judging from the number of people posting here and in other places, this is common. Seems there would be a solution that works. Any suggestions?
Here is the current content of my xorg.conf file:
ebaxter@ebaxter-desktop:/etc/X11$ cat xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Sun Feb 1 20:21:04 UTC 2009
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Fri Aug 14 17:54:58 PDT 2009
[Code]....
View 9 Replies
View Related
Jul 24, 2010
After installing some (much needed) upgrades, I am stuck being unable to install nvidia-settings after screen-resolution-extra upgraded from .11 to .13. Nvidia-settings, supposedly, requires .11. I can, of course, downgrade to .11, but I do not know if this is recommended. Is there anyway to get nvidia-settings back without downgrading? What is a good course of action?
View 1 Replies
View Related
Dec 6, 2010
I have what I think is a pretty eay question. I'm trying to set the screen resolution of my new 10.10 installation to 1920x1080. The monitor only supports up to 1024x768, but i would like more area. I've done this before but I forgot how i did it. In the end the screen spilled off to the sides and when I ran my cursor over to that section it would disply it. I have a feeling that i need to edit my xorg.conf file, but my nvidia drive has some new mode types and i figured I'd ask before making random changes.
below is my xorg.conf file.
UTC 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
[Code]...
View 2 Replies
View Related
Nov 15, 2010
I am running Fedora 14 on a Dell Lat D630 laptop.
When originally installing my resolution was a perfect 1440x900.
I then installed the Nvidia drivers with:
YUM install kmod-nvidia
This worked fine, I tried out Super Tux 2 to test it and I do indeed have 3D acceleration now. The only problem is my resolution has gone way down. The Nvidia software states its still 1440x900 but it definitely is not... And my monitor is down as (Not in front of it right now so can�t remember exactly) Generic or not detected... Is that what's causing the issue?
So to summarize, I have 3D hardware acceleration, the appropriate Nvidia drivers, it's just my resolution and the fact the Nvidia software is lying about it...
View 2 Replies
View Related
Oct 2, 2009
I'm trying to install F11 on my old FSC Amilo Pro laptop. The installer starts fine, shows up on the screen fine, but the graphic installation window is wrongly positioned on the screen. It's about 300px too far to the right and about 300px too low on the screen, so that my Next, Back, Cancel buttons etc are off the screen.
View 2 Replies
View Related
Apr 8, 2011
I have install squeeze, wheezy. I understand there a glitch in nvidia-setting. So how can I change screen resolution and refresh rate in xorg.conf?
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (pbuilder@windlord) Sun Jun 13 06:03:17 UTC 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection .....
View 4 Replies
View Related
Jul 26, 2010
I have an nVidia GeForce 7600GS with a dual monitor setup. A 19" Dell @ 1280x1024, and a 19" widescreen Acer @ 1440x900. The Dell is attached via DVI, and the resolution is detected properly, and set, but the Acer is connected via VGA, and so the native resolution is unkown to the nvidia control panel. It will only let me set the resolution up to 1024x768. I had it create the xorg.conf file, and i tried to edit it manually, changing its
[Code]...
View 9 Replies
View Related
Jan 27, 2010
Since I upgraded to 9.04 a while back I have had this annoying screen resolution issue. Every time I log into my Ubuntu system the screen resolution defaults to 1280x1024. My preferred desktop resolution is normally set at 1680x1050. So each time I log in I have to open the Nvidia control panel and manually set the screen resolution to 1680x1050. Even after logging out it will still go right back to 1280x1024 when I log back in.
But the funny this is I am almost positive the login screen resolution is 1680x1050 because the picture is crisp unlike the blurry and distorted picture at 1028x1024. I have tried everything from manually editing the x.org conf file to running the Nvidia control panel as root. Nothing saves my preferred resolution of 1680x1050. My Nvidia driver is version 190.42 and Ubuntu version is 9.04. The monitor is an ASUS VW192T+ which is detected by the Nvidia driver.
View 2 Replies
View Related
Mar 23, 2010
I install on my PC Ubuntu 10.4 and i make al the updates even on my video card I update my video card to the last driver from the NVIDIA official site 195.36.15 My video card is Geforce 8600 GL The big problem is that after the update I have only 2 modes for changing the resolution 320x240 and 680x480 an I relay need biger resolution (1024x786) My xorg.config is :
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Fri Mar 12 01:42:27 PST 2010
Section "ServerLayout"
[code].......
View 1 Replies
View Related
May 29, 2010
I've just installed 10.04 on my Dell Latitude D830 with a NVIDIA Quadro NVS 140M; upon booting Ubuntu asked me to install the official NVIDIA driver (latest) so I went ahead and installed it, now the boot splash screen is in about 640x480/800x600 rather than the usual 1920x1200 it was when I first booted.
View 4 Replies
View Related
Mar 25, 2011
I know there are a lot of threads out there for same or similar issues, but nothing I found was working for me until, by sheer chance, I found this very simple solution on the Fedora forums. Too elegant not to share.Environment:Ubuntu 10.10nVidia GeForce 5500Samsung SyncMaster 225BWUsing DVI cable (in case it matters)Issue:After installing the proprietary nVidia drivers, the screen resolution was no longer the correct native resolution of the display. In my case specifically, the nVidia X Server Settings utility was detecting the maximum supported screen resolution was 1280x1024 while my display's native resolution is 1680x1050.Solution:Open a Terminal window.Make a backup copy of the original xorg.conf file. This is just good form any time you are making config file customizations.
Code:
sudo cp -p /etc/X11/xorg.conf /etc/X11/xorg.conf_backup
Open 'xorg.conf' in a text editor.
[code]....
View 1 Replies
View Related
Jan 16, 2010
I have a new system I built this week. I have the nvidia drivers installed, but desktop effects, googleearth and Quake4 all try to load the /usr/lib/libGL.so.1 from mesa-libGL and fail to start.I have two other machines, both with nvidia video, and don't have the problem with them. I've looked for differences on the systems, but haven't located anything so far.
View 2 Replies
View Related
Sep 16, 2010
I am stuck at 1024x768 in Ubuntu 10.04 with the nVidia GeForce 7100. I installed the drivers suggested by nVidia on their website, but it doesn't seem to heighten my resolution any. 1024x768 is the highest which appears in nVidia X Server Settings.
Xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.53 (buildmeister@builder101) Fri Aug 27 21:34:01 PDT 2010
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Configured Keyboard" "CoreKeyboard"
[Code]...
Is there a way to fix this without having to buy a new card? I've read that the GeForce 7100 is pretty crappy, but I've got no money to space at the moment.
View 9 Replies
View Related
Jan 8, 2011
I just installed drivers for this nVidia GPU from the website. Now, whenever I boot, the screen resolution goes to 1024x768 instead of 1280x800 like I want it to. I have to change the screen resolution every time I boot into Ubuntu.
View 5 Replies
View Related
Sep 9, 2010
I recently purchased a cheap computer to use for everyday tasks. It came pre-loaded with Windows 7. The monitor I am using is a Vizio VX20L. It's native resolution is 1366X768. I have no problem with the screen resolution in Windows 7 but in Ubuntu, I am having some issues. I have the propriatary Nvidia driver installed in Ubuntu but for some reason I cannot get the screen resolution right. I am currently using a resolution of 1360x768 and the right part of my desktop is not on the screen.
I have tried to adjust the screen size using the monitor settings, but I still cannot get the whole screen to show up. If I set the resolution to Auto in the NVIDIA X Server Settings, it defaults to 1280X1024 and I can see my whole desktop, but it is streeeeetched. Here is some relevant information pertaining to my system:
I'm using Ubuntu 10.04
Integrated Video chip is NVIDIA GeForce 6150SE
The driver I'm using is NVIDIA accelerated graphic driver (version current)[Recommended]
screen is a Vizio VX20LHD
View 3 Replies
View Related
Jul 30, 2010
I was wandering around the system parameters and saw that there was an option to activate a non-open nvidia driver for my Asus Emachine EL1200 with Ubuntu 8.04 install (pre-installed, worked fine for a year now). So I did. However, when I restarted, my screen resolution was changed to 800*600 or so, no good. Although I could not see the right part of the same "nvidia" window, I managed to deactivate the driver. Regretfully when restarting the screen resolution was still 800*600. I thought it was 1440*900 for my Asus VK192S-B (checked it on internet) but it didn't work (did not check the refreshrate at that time). So I stared to fiddle around and stupidly accepted a 1280 * 800. As I said before the resolution is completely f***up now. I have about 4 copies of my desktop and the worst part is there are lines over it and I can not see what the windows say. I manage to get the resolution config screen, but can not get the right optios selected, working "blindfolded".
I looked at this helpful forum and identified the /etc/x11/xorg.conf file as the important file. Also I saw a xorg.conf.failsafe file with my original config! With the recovery cd of Asus I managed o set up a live session and actually can open the xorg.conf file and see the damned line with 1280*800. Regretfully the original /etc folder as well as the original home folder cannot be written in, or copied. Permission problems, as could be expected. I have some backup, but not of quite a lot of photos I uploadd from my camera recently. Reinstalling from scratch is fo the moment not an option.
View 1 Replies
View Related
