Hardware :: Canon BJC 4310SP Correctly Identified - Test Page Crashed
Jan 14, 2010
I have been given an old Canon BJC-4310SP printer. Performing the "built-in" test print works perfectly. Using the standard CUPS installation procedure (in Debian Lenny) also worked without a hitch. The new printer was correctly identified, CUPS suggested the appropriate driver and then installed and configured the printer as directed. But asking CUPS to print its test page crashed with the following message:
"Unable to open parallel port device file: Permission denied".
View 8 Replies
ADVERTISEMENT
Apr 13, 2010
I'm using Opera on openSUSE 11.2, and whenever I test java (using this page), it says "Applet crashed." Is there something special I need to do to get java to work properly?
View 1 Replies
View Related
Dec 8, 2010
I have a desktop computer running Linux Mint 9 with the Gnome desktop (not sure what version -- though by default Mint 9 comes with Gnome 2.30). Last night I tried adding a panel to the desktop by right-clicking on the existing bottom panel and selecting "New Panel". Please note that I've already got another panel at the top of the desktop on the left side on autohide and no expand.
When I added another panel, it placed a normal panel on the right side of the screen without any problems. When I right-clicked on the new right-side panel and selected "Properties", I changed the orientation to "top" (where there was already a panel, if you remember). After that moment, it seemed like the entire desktop environment crashed. Everything was completely unresponsive -- the only thing moving on the screen was the mouse. I couldn't do anything with the gui, not even shut the computer down.
Since the gui shutdown wasn't working, I switched to a different tty screen, logged in, and ran a shutdown command with the option to reboot. The computer shut down fine, and when it woke back up, the same problem was still there: Nothing loaded on the screen except for the background image and the mouse, which was still able to move but nothing else. I have the computer set up to automatically log me in, so I know it's not crashing before the user prefs are being loaded...
After restarting it again and getting the same result, I switched to a different tty screen, logged in, and tried messing around with stuff to no avail. I did notice, however, that the computer was becoming evermore sluggish, and something printed on the screen stating that a program had been terminated because of "not enough memory". It seemed like some process was consuming WAY too much RAM by itself or a program was accidentally forkbombing the computer. ...All because I added a panel...?
View 2 Replies
View Related
Jul 20, 2011
How do I get the configuration page for a Canon PIXMA IP1600 to print?
View 1 Replies
View Related
Jun 17, 2011
I have a Logitech ClearChat Stereo headset, and can hear music playing with the headset connected to the PC speakers (external Logitech). Have setup Empathy to be able to talk to someone using Google Talk. It seems to have been setup correctly, as I can see 2 contacts in the offline list. I don't have PulseAudio installed (I think ??), and can see only System | Preferences | Sound , which doesn't show me much. Here are the settings at present (inboard audio card) ..
Code:
:~$ sudo aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC1200 Analog [ALC1200 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0 .....
How can I test that the microphone is working correctly?
View 2 Replies
View Related
Aug 11, 2011
I am trying to set up a web page for the business and we have had the website or domain for a while but no one has put anything on it. I have never done anything like this before so i typed in the website and got the apache test page saying that i should add this: /var/www/html/
1) i'm not really sure what to add it to
2) i've tried adding it to the website url and that comes up with invalid page
3) could someone please explain in simple terms how i can get on to the webpage so i can start adding content to it?
View 1 Replies
View Related
Jun 12, 2011
I had installed and checked lamp stack last night but today when I type http://localhost the fodora test page for apache didn't come up. It is just blank. I had also configured apache to load after every boot.
View 14 Replies
View Related
May 7, 2011
I just installed openSUSE 11.4 on my 2 home machines. My home network lies behind a nat router but I still use the external zone setting for my firewalls. In the past to enable network printing between the two computers I opened TCP and UDP port 631. Yast would then see the remote printer, set it up and all was good. This time Yast sees and sets up the remote printer as usual. When I print the test page nothing happens. Checking the cups admin page at localhost:631 on the host machine shows the printer is set up to share but nothing is in the print que. Printing works just fine on the host computer.
View 2 Replies
View Related
May 6, 2010
I know my driver works and that cups is up and running, because I can print off test pages to my heart's content, but I can't get any actual documents printed. I'm connected over the network at work to a Japanese NEC MultiWriter 3650n (it seems to be Japanese-only---I could find on drivers was in Japanese). It shows up in System=>Administration=>Printing. I set it as the default printer, and, as I said, it prints off test pages without a hitch. But whenever I open, say, a PDF and try to print it, the document appears to get sent, but never actually prints, and never shows up in the print queue (while the completed test pages do).
View 9 Replies
View Related
Oct 20, 2010
I installed my epson stylus tx420w through cups web interface. I used the PPD file provided by the driver recommended in linuxprinting.org.But when I try to print the test page (or anything else), nothing is printed. According to the diagnostics, the printer status is "Processing page 1...", but it won't go beyond that.I've already tested it, it's fine. But won't work in ubuntu. Don't know what's going on.
View 5 Replies
View Related
Oct 18, 2010
I've installed Ubuntu 10.10 on an old box to use as an office print/fax and file server. I tried the server edition but I had no chance with command line programming so I've just used normal Ubuntu.
Ubuntu itself is working fine and I've installed my HP Officejet printer and it's fully working on the Ubuntu box. SAMBA and CUPS are installed.
I've then added the printer onto my Vista machine and here's where the fun starts. The Vista box sees the printer on Ubuntu, adds it with no problem and happily prints test pages, but I can't get it printing anything else.
I can't for the life of me find any reason why it would print a test page, but not print from Word, adobe or even a browser.
View 3 Replies
View Related
Feb 21, 2011
I have set up a local server running 10.04. I have cups installed and running. I can access the server via 192.168.28.200:631 webapoge. I can print test pages from that site. But when I try installing the networked printer on a client, the printer will install but I can't get the test page to print.
View 1 Replies
View Related
Dec 26, 2010
I have installed Canon LBP2900 on Red Hat 5 but it is not printing a single document. Even test page is not printing.
View 2 Replies
View Related
Jun 13, 2010
Can't access localhost test page, but opens localhost page when I use full dns, at least from local network machines?
Running slackware13.1, Httpd2.2.15, 2wire gateway. Firewall web&http pinholes for ports 80,443. Port 80 is working.
Code:
Returns error:
Quote:
Code:
Code:
Added 4400host.net to Resolve DNS on 2Wire Gateway(Never had to do this before to access httpd test from same machine or network machine?
Changed HTTPD.conf
Code:
Code:
Quote:
"It Works!"
Never encountered this before, usually httpd test worked for "localhost" with minimal effort. I am concerned to procceed with this odd behavior. Has anyone else encountered this configuration is?
View 5 Replies
View Related
May 24, 2011
I've recently installed F15 LXDE RC from the livecd and connected my USB Brother All-In-One MFC-5440cn printer. After following the Brother installation page, the Cups & LPR drivers are installed but when I'm in the cups page (http://localhost:631/admin), the printer will not print a test page or print from any application. The LCD panel on the printer does show 'receiving data' but nothing comes out. The last version of Fedora I had running was F13 and the same printer worked fine.
Are there any other printer drivers I need to install besides the Brothers? The printer does show up in the Print Manager but nothing prints. I did have this same type of issue with Mageia Beta 1 and ended up installing a2ps, which wasn't included in the original print drivers, and it is now printing. So I had to install a2ps with F15 but still no print output. Something must have changed with the recent distros causing this. After looking at the output of dmesg I see this:
Code:
WARNING! power/level is deprecated; use power/control instead
[14.867397] udev-configure-printer[587]: add /devices/pci0000:00/0000:00:13.2/usb1/1-3/1-3.2/1-3.2:1.0
[14.867991] udev-configure-printer[587]: parent devpath is /devices/pci0000:00/0000:00:13.2/usb1/1-3/1-3.2
[14.869115] udev-configure-printer[587]: Device vendor/product is 04F9:016D
[14.880470] udev-configure-printer[587]: MFG:Brother MDL:MFC-5440CN SERN:- serial:BROM5F412304
[14.880520] usbcore: registered new interface driver usblp
[15.902920] udev-configure-printer[587]: failed to connect to CUPS server; giving up .....
Any idea why it's failing to connect to Cups or any idea how to find out? Is it possible to have too many USB devices connected? I'm using a 4 port usb hub in use and also using a usb mouse/keyboard connected.
View 6 Replies
View Related
Jun 12, 2011
I use .htaccess to deny all ip addresses except certain to an internal wiki on a subdomain.
Code:
If access is denied to the homepage users are shown the Fedora test page instead of my own custom 403 error page. When I go to a page - not home - I see a standard 403 error page.
Code:
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request. Apache/2.0.54 (Fedora) Server at wiki.domain.com Port 80. What am I missing here? Seems like my ErrorDocument is not being reached..
View 2 Replies
View Related
Mar 22, 2010
I recently built a server from an old box using Ubuntu Server 9.10. This is my first server and I am very new to the server world.I have an Epson Stylus NX400 connected via USB. I have managed to configure it to the point where I can see the printer listed on my client laptop and can print a test page. However, I cannot print anything else. When I access the job history through the CUPS adminI can see that the print jobs were recognized and marked as complete, even though the printer never physically engaged.
View 4 Replies
View Related
Jul 22, 2009
I have 2 pc connected to a HP officejet j6480 1 pc connect by usb the other is eth via a router. The eth pc will not print anything but a test page. It it open a print box but won't give a option to print. The other pc is also on the same router. USB print fine.
View 1 Replies
View Related
Mar 28, 2010
I have a couple of large-format printers (Epson R2400, HP 9650) which I only use infrequently. If they are not used very often, they dry out, the print heads get packed up, it's an expensive mess to deal with when times comes to run off some prints. The printers are physically connected to a Windows machine to which my Ubuntu computer is networked.It would be helpful if there was a utility that could initiate a test page print job on the machines, which could be scheduled to run once a week or so. I've had no luck finding such a thing for Windows
View 9 Replies
View Related
Nov 15, 2010
i'm setting up apache on 5.3. i can access the apache test page without a problem from the server via URL... But i can't figure out how to access this page from another computer within the domain (for when i upload my home page.
View 4 Replies
View Related
Jul 20, 2009
I have a FC11 box, with an HP prineter attached. I trying to print from my laptops after I have setup samba and shared the printer , It was working fine when I was installing FC4 and FC5. I am not sure what is missing. when I tried to print from the XP box I got "Test pge failed to print" error.
View 9 Replies
View Related
Aug 9, 2009
After installing FC11 on my Mac Mini intel terminals, I noticed the network config GUI is completely broke, So I continued with a hand configuration.
Everything seems ok eth0 is up , it has the correct IP, DNS and default gateway, but browser quieries take forever to load.
E.g. if I type Google in the browser it takes about 20seconds before it loads the page.
To add insult to injury, I have a 16Mbit/s Down 2.5Mbit/s uplink. the other 10 or so rackservers on the network responds fast, so it is nothing to do with the network or connection. They all run FC7-9.
The problem is squarely with FC11 and must be some bug not reading or resolving DNS correctly.
Anyone have an idea how I can figure this out with FC-11.
It seems to be the worst FC distro.
I generally was happy with all FC6-9, but 11 really sucks (the ppc version wont even install on my ppc terminals)
That the Mighty Mouse Wireless, worlks out of the box is very nice though, but that is all.
View 14 Replies
View Related
Jun 11, 2011
one month at this stage and noticed recently that all automatic updates to my system have ceased, so I tried a zypper update from the terminal yesterday and believe it or not I got 1110 updates, about 7 deletions a 3 programs were changing architecture. This went all all day yesterday and finished sometime early this morning when I had to force a reboot as the shutdown button did nothing. After all those updates I do not notice any version upgrades for a few things I checked like Office, Amarok, DigiKAM etc but I am back to a most annoying problem that I had in my first few days i.e. my printer an Epson Stylus Color 760 is totally messing up 2nd and subsequent pages in a printout.
The last time this happened it seemed to sort itself out because deleting the printers discovered and their drivers did nothing. I am sorry to say it is putting me off SUSE 11.4 which I had liked BUT it is so frustating when I can't eben print more than one page correctly. I have come from Windows 7 where these problems did not exist.
View 9 Replies
View Related
Dec 19, 2010
I'm using fedora 14. And I have installed apache, PHP and MySQL. I tried testing PHP with phpinfo(). But when I view it view my browser (localhost/test.php) it just shows the code itself instead of displaying the phpinfo page. This is the content of my test.php page.
<?php
phpinfo();
?>
View 3 Replies
View Related
Jul 2, 2010
i opened up my browser to surf the web and a page popped up i had never seen before.Apache 2 Test page powered by centos. Any address i put into my firefox browser won't come up and i'm stuck on this test page and,i can't locate it on my computer to remove it.How do i get rid of it and more importantly how did it get on my computer in the first place?
View 10 Replies
View Related
May 19, 2014
I'm struggling on installing a KONICA-MINOLTA printer magicolor 4695MF printing properly with Linux Mint Debian Edition (up to date). The test page works fine...
KONICA-MINOLTA delivers 2 PPDs: one for standard printing and one for OpenOffice printing (available on the KONICA-MINOLTA support site).
Leaving a side the one for OpenOffice which is poor in using the capabilities of the printer, I concentrate only on the global one (M4695PX.ppd).
It's much more difficult for other applications, starting with EVINCE: some PDF files are printed properly (i.e. those generated in OpenOffice by the CUPS PDF printer), others come out as one only blank page, regardless to the original length of the document.
So documents received from 3rd party may be "printable" or not. And trust Murphy, the most critical aren't printed...
Attached, the troubleshooting file generated by [system-config-printer] => [URL] ...
View 0 Replies
View Related
Aug 12, 2010
Why Ubuntu would not be able to read an ISO that windows xp is fine with? I find that it's usually the other way around. This has occurred with 3 different ISO's. Gmount and K3b don't like em at all.
View 1 Replies
View Related
May 28, 2015
I booted Debian in Live mode on a USB to try to see if the internet will work on my Linux machine before I actually install it (there is some tricky internet software where I live that I must overcome, but that will come in another thread).
Currently I have no WiFi whatsoever. When I go into the internet access menu I only get back the fact that there is a wired connection that's possible (theoretically, I should be able to also see networks to which I can connect to, but I don't). Also, it's impossible for me to actually get a wired connection going, unless I can somehow give it through my Windows laptop.
When I did some research, the people seem to say that I need to update the driver after enabling the use of non-free software; I can't do that since I have no connection in the first place.
The OS recognizes that the PCE exists (I am using asus pce-ac68), when I did "lspci" command it told me I have BCM4360 and BCM43225 chips.
I think I found the drivers here "[URL] ......" but I don't think my chip is listed there (there is no BCM4360 or BCM43225 on that list). What to do with those drivers, I mean how to compile them and install them on a Debian machine, and I'm not sure I can even install them on a live boot (but I want to make sure my internet works on the live boot before I actually install the OS).
View 12 Replies
View Related
Jul 24, 2010
During the installation of Ubuntu 10.04 the partitioner was wrongfully configured to see a functioning btrfs partition as ext4 (without reformatting it). Thus the installation process got stuck at 5%.Installer was run again ignoring the btrfs partition.btrfs-tools was added to the new 10.04, but the btrfs partition is now recognized ast4 with lost+found folder on it.Tried to add the btrfs to etc/fstab as btrfs but t won't mount.Can the partition/filesystem type be changed so that this is actually recognized and mounted as btrfs, hoping my data is still on it somehow?
View 9 Replies
View Related
Mar 1, 2011
I just found out that I did mistake.I transfer 1 file into the Ubuntu Linux,but that File has a strange character. Take a look at the picture screenshot taken.free image hostingExplanation: 1) The file name is unknown, take a look at the WinRAR Archive (left window)2) The file name recognized in Ubuntu without any name, thus it appeared as Empty (right window: putty program). And via Command Line Interface, it appeared as Question Marks.
View 5 Replies
View Related
