General :: Get The Configuration Page For A Canon PIXMA IP1600 To Print?
Jul 20, 2011How do I get the configuration page for a Canon PIXMA IP1600 to print?
View 1 Replies
ADVERTISEMENT
General :: Can't Get Ubuntu 11.04 To Print On Canon Pixma Ip2772?
May 27, 2011I can't get my ubuntu 11.04 to print on canon pixma ip2772, it says that I got canon ip2700 series installed, and show that I am printing a test page, but nothing happens on the printer.
View 4 Replies View RelatedGeneral :: Unable To Print To Canon Pixma 1800
Apr 22, 2011Running Ubuntu 10.10, when trying to print to canon 1800 print file is created, spooled to printer but does not print. Job appears in print Q and ends as finished job, next job number increases correctly. Printer light flashes to indicate data in,, but nothing out on paper !! (printer works fine on "the Other" OS!
View 4 Replies View RelatedUbuntu :: Canon Pixma IP2600 Ready For Use But No Print Out
Feb 12, 2010I just bought a new printer yesterday. It is a Canon Pixma iP2600 series. I connected everything properly and my computer found the drivers and told me the printer was ready for use. However, when I tried to print out a test page the computer said it was printing, the printer was flashing as it should, but nothing was printing out. Is there some switch I need to turn on or off? Is there something that I need to type in or delete somewhere? The old printer was a HP deskjet and it did work even if it was a little slow being that it is over 8 years old.
View 6 Replies View RelatedUbuntu :: Using Canon Pixma MG5220 - How To Print To It From My Computer
Apr 7, 2011I recently purchased the canon pixma mg5220 and am currently figuring out how to print to it from my computer.
First of all, I dont know how to connect to it (its a wireless printer btw and is currently connected to my wireless router). I went to the "add new printer" part of the printer utility and selected "Find Network Printer." I dont know what to type in for "host" however. Right now i have a temporary fix of sharing the printer on my laptop (which runs windows) and printing through that.
Second of all, drivers. I found http://ubuntuforums.org/showthread.php?t=1588333 and downloaded the drivers (to my downloads folder) from the link provided, but I can't figure out how to install it. The post says to run the install.sh but it seems to be just a text file, and when i right click it, "properties" is not an option, so i cant mark it as executable. How would can i run this file to install the drivers?
Ubuntu :: Canon Pixma Ip90v Bluetooth Printer Cant Print?
Mar 10, 2011I am looking for a good new ALL IN ONE printer that will be compatible with Ubuntu right out of the box (scanner and everything).
I am also looking for a portable bluetooth printer that will be compatible. I currently have a Canon pixma ip90v bluetooth printer but I cant get it to print AT ALL and Ive tryed everything.
I am currently running 3 computers with Ubuntu 10.10 and one with 11.04 Alpha 3.
Hardware :: Canon Pixma MP250 - Slackware 13 It Doesn't Print
Apr 29, 2010Trying to make a Canon Pixma 3-in-1 MP250 to work with my Slackware. I've took the drivers from the canon website (they have .deb, .rpm and sources there) and compile. Basically I followed the instructions from INSTALL files in each subdirectory (backend,cngpij, etc).
Then I upgraded also CUPS to 1.4.3.
Installing the printer in CUPS, I end up with:
Code:
Description:Canon MP250 series
Location:
Driver:Canon MP250 series Ver.3.20 (color)
Connection:cnijusb:/dev/usb/lp0
Defaults:job-sheets=none, none media=iso_a4_210x297mm
It seems ok. But when I send a test page (or any other kind) to printer, it shows some activity on the led display, cups reports the job as completed but nothing happens!
As an extra, I tried to convert .deb packages to .tgz and install from them. The same result, except now the scangear utility is working (so scanning is ok).
How can I find what's missing from here? Maybe it's a bug with cups/drivers or something is missing from configuration?
p.s. On other machine I have an Xubuntu (Karmic Koala). Installed there from .deb packages and the printer works as expected.
General :: Canon IP1600 Printer-system Not Modified?
Oct 19, 2010I recently bought a used Canon IP1600 Inkjet Printer. It did not come with the cd-rom to install and set up this printer. I downloaded the driver. And i recieved a message saying my system is not modified.
View 1 Replies View RelatedHardware :: Canon Ip1600 Driver ?
Jan 1, 2011Where I can find a linux driver for my Canon ip1600 printer? I have scoured the internet and cannot seem to find one.
View 1 Replies View RelatedGeneral :: Install Canon Pixma Ip1300 On Ubuntu?
May 29, 2010I have a Canon Pixma Ip1300 color printer but I don't know how to install it on ubuntu 10.
View 3 Replies View RelatedGeneral :: Need System Scanner For Canon PIXMA MP460 Printer
Apr 7, 2011Are there any (easy to install) (X)SANE backends for Canon PIXMA MP460?
View 1 Replies View RelatedGeneral :: Where To Find Driver To Canon Pixma IP2600 To Work In Ubuntu?
Jan 30, 2011I have downloaded all drivers from canon website for linux or Ubuntu . My computer find this printer which suppose to be the right one but nothing happen ? usb://Canon/iP2600%20series. do I need more drivers or files to work in Ubuntu ?
View 1 Replies View RelatedDebian Configuration :: Can't Print From A CANON LBP6020 Printer
Aug 4, 2015I have the printer Canon i-SENSYS LBP6020. I followed the instructions from the site URL....There are no errors, but when I try to print, nothing comes out of the printer.My system is: Debian GNU/Linux 8 (jessie)Here is some debugging information:
Error log while printing from a CANON LBP6020: URL....
Troubleshooting information while printing from CANON LBP6020: URL....
Ubuntu :: Driver For Canon Pixma MX330?
Jan 26, 2010Does anyone have an idea of where i can find a driver for this printer? The system does not have one and if I try a driver for say the PIXMA MP220 which is CUPS + Gutenprint v5.2.4 [en] (actually, all the PIXMA drivers are that one) and I print the printer seems like it receives some command but nothing else happens. The printer says 'Printing from PC' and then goes back to the main screen.
View 5 Replies View RelatedUbuntu :: Installing Canon Pixma MP140 In 11.04?
Aug 4, 2011I was using 10.04 until a few days ago, and with 10.04 my printer worked fine, I used the default drivers for MP150 and that worked fine. But now I'm using 11.04 and I'm trying to instal the printer with the default drivers for MP150 but it's not working. When Ubuntu tries to find the driver is not giving me any result for MP140, so I'm selecting the option "CANON PIXMA MP150 - CUPS+Gutenprint v5.2.6 Simplified [en] (Recomended)" and allows me to click next and to give a name to the printer and to hit next, but then the windows closes and that's it then I go to System > Admin > Printer and I double click the printer I just created and I click Print Test Page and then it gives me "Printer Status: Processing - Printing Page 1.8%" and after 4minutes or so gives me "Installation or actualization of package "python-xmpp 0.4.1-cvx20080505.2" failed" and that's it Is there a way to fix this? I have no idea why this is not working since it worked fine in 10.04, and I really need to use the printer and the scanner as soon as possible
View 3 Replies View RelatedUbuntu :: Print A Full Page And Then Print A Blank Page
Feb 1, 2010I am running 9.10. I have a HP Photosmart 7350 printer. I have it installed and printing. But the issue I am dealing with is that it will print a full page and then print a blank page..then a full page..then a blank page. Actually they aren't completely blank..it shows half of "2 of 6" or whatever page it is on. Like it cuts that in half and prints the 2nd half of "2 of 6" onto a separate new page.
View 2 Replies View RelatedOpenSUSE Hardware :: Installing Canon Pixma Ip3000 On 11.2?
Mar 19, 2010I have just installed SUSE 11.2, but although my ip3000 shows in the hardware, I cannot get a correct print out on A4 paper and I am informed that no driver is available. There must be a work-around for this?
View 6 Replies View RelatedOpenSUSE Hardware :: Canon Pixma IP1880 - No Color
Oct 15, 2010It's weird because it did not even print different shades of gray (for the colors), as though I set it to print to black-and-white, when clearly I did not.
View 3 Replies View RelatedOpenSUSE Hardware :: Configuring Canon PIXMA MP510 Under 11.3
Jan 14, 2011I'm trying to get my Canon Pixma MP510 scanner to work under openSUSE 11.3. Canon Linux Support doesn't seem to have anything for 11.3, but sane claims to provide basic functionality. The printer is working fine, but I don't manage to configure the scanner.
I tried to configure via YaST, but the following happens: The scanner is found, but (correctly) labbelled as "not configured". Clicking "Edit", the PIXMA MP510 is listed and a driver suggested: "Canon PIXMA MP510: (Package sane-backends) Driver pixma should provide basic functionality (USB-ID 0x04a9:0x1717)" If I select this option an click on "Next", the window crashes and I get the following error in the KDialog window, but I have no clue what it means: "YaST got signal 11 at YCP file Wizard.ycp:849 /sbin/yast2: line 399: 5663 Segmentation fault $ybindir/y2base $module "$@" "$SELECTED_GUI" $Y2_GEOMETRY $Y2UI_ARGS"
Is this a YaST problem? Or driver related? I thought about configuring the scanner without YaST, but don't know how to do it. I tried to google a HowTo, but couldn't find anything useful.
The command "sane-find-scanner" successfully detects the scanner, "found USB scanner (vendor=0x04a9 [Canon], product=0x1717 [MP510]) at libusb:001:004", but the command "scanimage -L" yields "No scanners were identified."
how to make YaST configure my scanner? Or how to configure it without YaST?
Ubuntu :: Can't Install Canon Pixma Ip1800 Printer On 10.10
Oct 15, 2010There is not a driver for the Canon Pixma ip1800 Printer in Ubuntu. How do I go about getting this printer to work with Ubuntu 10.10.
View 9 Replies View RelatedUbuntu :: Get The Canon Pixma MP495 Working In 10.10 (Maverick)?
Oct 21, 2010I have finaly gotten the Canon Pixma MP495 working under Ubuntu 10.10, with full resolution capabilities of the printer.This printer is only advirtised as having a max resolution of 4800x1200 DPI. However, I called Canon to get the full range of print resolutions and was informed that this printer is capable of 9600x2400 DPI.I haven't tested this below Ubuntu 10.04 but it should work fine.
For setting your MP495 printer up on your network without the use of a Windows or Mac machine (Fresh out of the box with Ubuntu) you will need to match your Routers SSID to the printers default SSID, and remove any security you have enabled. This will allow the printer to connect to your network.
Printer Defaults:
SSID: BJNPSETUP
IP ADDRESS: Automatic
Once you have done that you will need to activate the wireless lan on the printer.Press the Maintenance button on the printer 13 times until you see what looks like a capital G without the middle line. Then press the color start button. (refer to page 10 of your Network Setup Troubleshooting manual for an actual picture of the symbol) You should see the wifi light on the front of the printer turn on and be solid not be blinking. (If it is blinking check your routers SSID settings and match the Default SSID of the printer as listed above.
Now download angryipscanner AngryIPScanner and install it by double clicking it. It should open in the Software center or with the Gdebi installer. (this may take a few minutes to install.)Once you have installed AngryIPScanner, run it and change the ip range to include from 1 - 254 in the last octet. Then click start. When it finishes look for an active connection with a Hostname like A001BF000000.local. Yours may be different but should be very simular.
The IP address given for that hostname is the IP address of your printer. Open Firefox and type that address in the address bar and press enter. From there you can configure you printer for the SSID, and encryption that you had on your router before the change, and set a static IP for the printer so you can manage it easily.After you change the SSID and encryption on the printer you will have to go back to your router and change the SSID and encryption back to what it was before so your printer can connect again.Now your network should be back the way it was and your printer should be connected Now that you have successfully connected the printer to your wireless network continue with the rest of the installation. Download the drivers for the MP495 . You will be downloading cnijfilter-mp495series-3.40-1-deb.tar.gz.
Extract cnijfilter-mp495series-3.40-1-deb.tar.gz to your Home directory.Change the permissions of the install.sh file to run and an executable by Right licking on install.sh and then left clicking Properties. Click on the Permissions tab and put a check mark in the Allow Executing file as program box. Then open a terminal and type: [CODE]sudo ./install.sh[CODE] Follow the prompts and if you are using the printer over the network select network when prompted. I you are using it via USB choose USB. Don't forget to scroll down to complete setting up your printer to use full resolution and set up the scanner.If the first method didnt work try this.Open a terminal and enter
Code:
cd /home/*/cnijfilter-mp495series-3.40-1-deb/packages. (Enter your username where the astride is.)
Quote:
For 64 bit systems you need to replace cnijfilter-common_3.40-1_i386.deb, and cnijfilter-mp495series_3.40-1_i386.deb with cnijfilter-common_3.40-1_amd64.deb, and cnijfilter-mp495series_3.40-1_amd64.deb. For the printer setup. For the scanner replace scangearmp-
[code].....
Ubuntu Networking :: Driver For Canon Pixma Mg6120?
Feb 5, 2011I am new to Linux and to make matters worse, am trying to install a new printer but cannot find the drivers for it. it is a cannon pixma mg 6120.
View 1 Replies View RelatedHardware :: Canon Pixma Mx330 Opensuse 11.1 Compatibility?
Jan 29, 2010I have recently purchased a canon pixma mx330 all in one printer. I tried using yast on 64 bit opensuse 11.1, kernel version 2.6.27.7-9 to locate the necessary driver to no avail. Is this a futile attempt or is there a driver that yast can't find.
View 1 Replies View RelatedSoftware :: Installing RPM For Canon Pixma Ip4850 In PCLINUXOS
Mar 9, 2011My distribution of choice is pclinuxos, the repos do not have a driver for my pixma ip4800.I have downloaded the two drivers for this printer from the canon site but so far have been unable to install them or find a specific thread that can help.
View 2 Replies View RelatedUbuntu :: Printing & Scanning With Canon Pixma MP560
Aug 31, 2010I use an Intel P8700, 2 core 64 bit m/c.I have tried downloading the Canon binary files, but these fail after starting when the software detects a 64 bit mc.Now trying with the Canon source files.extracted the print filter loaded the "autogen.sh" which ran and invited me to type "make". Yes! I thought!I have been trying to print for about 5 months now, and am getting weary!George "autogen.sh"ran ./configure, apparently successfully, invited me to type "make" which I did. This failed!I have a copy of the interaction but cannot see any way to add it to this post.
View 6 Replies View RelatedFedora :: Install Canon PIXMA IP1900 Under F13 AMDx86_64 Plattform?
Jul 6, 2010I have installed Fedora 13 on AMD x86_64 plattform. I want to add the Canon PIXMA iP1900 printer, but cups doesnot have in the repo. (127.0.0.1:6xx). Then i visited canon-europe webpage, and i downloaded the rpm version of the printer driver. But it no works! and the printer isnot added to the repolist of cups.Who can i solve this problem in Fedora 13 ?
View 1 Replies View RelatedOpenSUSE Hardware :: Get A Canon PIXMA IP1500 To Work With Laptop?
Jul 9, 2010I just acquired this printer. I would like to get it to work with my laptop.I'm running OS11.2 I've looked in yast but it isn't listed. Looked in Canons website and didn't find a driver for linux.
View 9 Replies View RelatedOpenSUSE Hardware :: Setup Printer A Canon Pixma MP530?
May 8, 2011When I try to set up my printer a Canon Pixma MP530, there is no driver! Only the Generic ones and they don't work. On Ubuntu using the Pixma MP500 driver works just fine, but there is no option for that on suse. Only for HP and Generic. The only solution I have found was turbo print, and that costs $30. I am hoping to find a solution, I really like SUSE, but I may have to go back to Ubuntu.
View 9 Replies View RelatedOpenSUSE Install :: 11.3: Can't Get Canon Pixma MG 5150 Scanner To Work
Jan 7, 2011I'm trying to get my Canon Pixma MG 5150 scanner/printer to work. While the 'printer' is doing well the 'scanner' appears to be stubborn. I use the scangearpm-MG5100series-1.60-1 driver provided by Canon which is said to be fine with Suse 11.2.
The trouble is, that though the scanner scans it does not deliver anything back. Here are the details:
When I run scangearmp as root in a terminal I get the following output:
Code:
(scangearmp:6902): GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to the session bus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
[Code]....
Ubuntu :: Canon Printer PIXMA IP1200 Driver Required
Apr 1, 2011I have a Canon PIXMA iP1200 and Ubuntu does not recognise it. Need a driver for this printer?
View 6 Replies View Related