i opened up my browser to surf the web and a page popped up i had never seen before.Apache 2 Test page powered by centos. Any address i put into my firefox browser won't come up and i'm stuck on this test page and,i can't locate it on my computer to remove it.How do i get rid of it and more importantly how did it get on my computer in the first place?
View 10 Replies
i'm setting up apache on 5.3. i can access the apache test page without a problem from the server via URL... But i can't figure out how to access this page from another computer within the domain (for when i upload my home page.
View 4 Replies View RelatedI have installed the CentOS 5.3 on VMWare. Then I Have Installed Apache ,PHP , Mysql with the flowing Command :
yum install httpd
yum install php
yum install mysql
yum install mysql-server
yum install mysql-devel
yum install php-mysql
Then I tested my Web Server , Data Base server and PHP Whit Create A PHP Page that work to Mysql this Test is successfully. Next I ping my machine IP (192.168.6.131) and then Ping windows xp machine. Even I Ping My Linux machine in Windows XP. But when check the PHP Page Or Local host in Linux machine whit Browser (IE or FF in XP), Response (IE:) Cannot display the webpage or (FF:) The connection was reset.
I am trying to set up a web page for the business and we have had the website or domain for a while but no one has put anything on it. I have never done anything like this before so i typed in the website and got the apache test page saying that i should add this: /var/www/html/
1) i'm not really sure what to add it to
2) i've tried adding it to the website url and that comes up with invalid page
3) could someone please explain in simple terms how i can get on to the webpage so i can start adding content to it?
I had installed and checked lamp stack last night but today when I type http://localhost the fodora test page for apache didn't come up. It is just blank. I had also configured apache to load after every boot.
View 14 Replies View RelatedI am using following software on my web server:
RedHat 2.6.18-92.1.10.el5
Apache/2.2.3
Coldfusion 8
My webserver accesses a backend mySQL server using CentOS5
The last week, I have been getting a "page Load Error" on my web server whilst others told me they are getting a "broken link" error when they try to access my web site. It has been working fine for the last 12 months until last week.
ADSL, modem and router okay according to service provider (verizon)
I can ping my IP address and my domain name.
# netstat -tap
shows http and https both processes running.
# service httpd restart
no issues
I shut down firewall and tried again, but got the same "page load error".
I am trying to run though the qmailrocks setup on a centos 5.5 and I am running into an issue when trying to telnet to port 25:
telnet localhost 25
Trying 127.0.0.1...
Connected to localhost.localdomain (127.0.0.1).
Escape character is '^]'.
Connection closed by foreign host.
Everything else seems to be working (telnet to 110), and I turned off the firewall entirely, but I still cannot telnet to port 25. I also get a blank error within squirrelmail when attempting to send mail out (ERROR:Message not sent. Server replied: ). I apologize for not going directly to the qmailrocks forum, but they are currently closed down (due to lack of funds). I also am a newbie, so I apologize for the lack of needed information. If anyone has any ideas, please let me know what information you would need.
I have a software program that when you try to install it on Centos it returns "This programs requires RHEL 4" Is there a work around to get the software to use the Centos software the same as it would RHEL 4?
View 6 Replies View RelatedI edit /etc/login.defs so it change the mail directory:
Before changes:
MAIL_DIR /var/spool/mail
#MAIL_FILE .mail
U have spent 4 days trying to configure my router thinking that it is my router that is not working but when I go to my dynamic dns or my static ip address it takes me to my admin router on the local computers.when I type httpd it says it cannot bind to port 0.0.0.0:80 i checked it is set up to listen to port 80 this is really confusing me i am beginning to think the people who built my server did not set it up properly if i go to localhost or 0.0.0.127 it goes to the apache default page fine.I have not changed anything since it wad installed except the centos 5 updates any ideas?When i login my password is root and the password is the default I have changed nothing else on the system as I still have no clue about it.Just to clarify on my router I have port 80 and port 443 set to my static ip address is this correct or should it be the eth0 Bcast ip address?Can anyone give me an idea of what i need to check? On my router I have set up port 80 and port 443 and dynamic dns and static ip address.Sorry I am totally new to linux never used it before would be nice if anyone has any ideas how i can proceed with this.
View 1 Replies View RelatedWhat is the best place to get an updated nVidia video driver for CentOS 5.5? Is there a CentOS package available that will update it? Or is it best to download it directly from nVidia?
Also, I do not have an internet connection on the machine, so it will have to be a manual download and installation.
We have CentOS on an HP proliant g5 server and attached to it is an DAS with 3 branches of disks so 5 - 5 - 5 drives.Now what we had so far there is that every branch was on raid 5 and totaling 3 mounted drives each with 4TB (disks are 1Tb each).But a couple days ago something happened while i was replacing older drives with some bad sectors with new one. What I did is to remove old drive, put in new one, initialize and attach to array and rebuild starts.Now somehow 2 drievs ( as i was rebuilding 2 arrays at once) switched place.so disk on 1_1_5 and disk on 1_3_5 switched place. There coul dbe possibility that I made mistake and assigned them to different arrays when initializing but that is really hardly as i replaced one then later another so...
Anyway to the to the point.Is there painless option to remove 1 disk from array and then assign it to other array and then let raid rebuild everything normally?I;ve made backup of everything there so there is no fear of loosing anything...By the way at the same time when that switch happens a partition from 1 raid array completely dis speared and there is only unallocated space on that one right now.
after a successful installation of the latest debian testing amd64 kde CD-1 iso, the monitor shuts off about 2 seconds after passing the grub2 menu while computer remains powered.
View 7 Replies View RelatedI added an ext4dev filesystem to my hard drive as /dev/sda3 and mounted at /share with the goal of putting all of my multimedia files on it and sharing it through NFS. I followed this guide: [url]
Of course, this was from lenny (hence the -dev). The partition was fine, and I mounted it numerous times. I also performed a dist-upgrade to squeeze. I shutdown that computer with the usual 'shutdown -h now' and disconnected the AC power cord from it, because I wasn't planning on using that machine for awhile. As far as I could determine, everything was fine before I unplugged it.
Every time that computer is powered off, the clock resets to 1999 because the battery is bad. So I am used to getting the "last mount time is in the future" error.
Three weeks after halting, I powered the computer back on. It was unplugged until this point. I got an error message when it attempted to mount /dev/sda3
I then removed its line from /etc/fstab, rebooted. and tried to check it, but I just keep getting the same error-- even with the '-b 8193' option.
The machine is still using the 2.6.26 kernel from lenny. I am building a new one right now (2.6.30), hoping that the problem is caused by the ext4dev/ext4 module. Otherwise I don't know what to do.
We've been having lots of problems with burning CD-Rs on our Dell PowerEdge and T300 servers. We've had the CD recorders replaced frequently, and that often fixes the problem, but then we'll start having problems again. Usually it is the CD refuses to write, or it gets written but can't be read. Often, if I re-run the burn with the same blank CD, it will be fine.
I'd like to test some CD-Rs and compare error rates so I can recommend what CD-R media we should be using. Currently we are using Memorex and Verbatim CD-Rs. Is there a good cd recording/testing suite for Linux that I could use to do this?
I just tried this and it only installed PHP 5.1.6
yum --enablerepo=c5-testing install php
Loading "fastestmirror" plugin
Loading "allowdowngrade" plugin
Loading "priorities" plugin
Loading mirror speeds from cached hostfile
* rpmforge: ftp-stud.fht-esslingen.de
* base: mirrors.dedipower.com
* updates: mirrors.dedipower.com
* c5-testing: dev.centos.org
* addons: mirrors.dedipower.com
* extras: mirrors.dedipower.com
c5-testing 100% |=========================| 1.9 kB 00:00
primary.sqlite.bz2 100% |=========================| 390 kB 00:01
736 packages excluded due to repository priority protections
Setting up Install Process
Parsing package install arguments
Resolving Dependencies
--> Running transaction check
---> Package php.i386 0:5.1.6-23.el5 set to be updated
--> Processing Dependency: php-cli = 5.1.6-23.el5 for package: php
--> Processing Dependency: php-common = 5.1.6-23.el5 for package: php
--> Processing Dependency: php = 5.1.6-20.el5_2.1 for package: php-devel
--> Running transaction check
....
I am trying to search a tool for testing multicast. Currently, 'yum search multicast' yields nothing. I saw mcsender and mctest in google but they seem not to be supported in CentOS. Do you know any tool that can test multicast?
View 3 Replies View RelatedI've been trying to install VSFTP on a test box I have at home. Here are the steps that I've done so far: First, I install vsftpd via yum. yum install vsftpd
View 4 Replies View RelatedDo you have an idea how to test postinstall script without reinstalling the server every time?
View 1 Replies View RelatedNewbie on the block with Centos 5.3 on a test server and and Ubuntu on a test workstation Note the wiki on VNC for a windows workstation but presume I could do this more easily from "Jaunty" (Ubuntu v 9.04)
View 10 Replies View RelatedI have Centos 5.3 installed on my pc. I have mysql, PHP and apache server running on my computer too.Is there any way I can test my website on my pc without running any stack ( lampp )?
View 10 Replies View RelatedI have been battling an issue for a couple of days and I have it down to 2 possibilities. Memory or mobo. A server in the DC is being very sketchy. Sometimes it will boot fine, sometimes it will boot but will not show all the memory, and sometimes it will hang before it even posts. I have replaced just about everything inside the system except for the memory and the mobo.
I would like to test the memory before replacing either because both are a few hundred dollars. The problem is, the memory doesn't log any errors and running a memory test with ubcd doesn't work because it's ecc memory. I thought I remembered hearing that there is a way to run a memory test during a Centos or RHEL installation, but I can't figure out how.
The memory is
DDR2 667 FB-DIMM
and the board is
Tyan S5380
I am trying to run though the qmailrocks setup on a centos 5.5 and I am running into an issue when trying to telnet to port 25:
telnet localhost 25
Trying 127.0.0.1...
Connected to localhost.localdomain (127.0.0.1).
Escape character is '^]'.
Connection closed by foreign host.
Everything else seems to be working (telnet to 110), and I turned off the firewall entirely, but I still cannot telnet to port 25. I also get a blank error within squirrelmail when attempting to send mail out "ERROR: Message not sent.
I install CentOS5.5 on VMWARE,the system is working properly.I want to test reinstall CentOS5.5 on VMWARE,So,I make a snapshot.My system partition（Manually partition ）is:/(1G),/boot(512M),swap(2G),/usr(30G),/var(10G),/data(20G).Each partition is independent of the ] partition.I reinstall CentOS5.5 by CentOS5.5.ISO.I format / partition,and other partition unchanged.However, the installation process was wrong:
==============================================================
Package Installation
Error running transaction[code]...
How I can reinstall CentOS（Do not lose important data）？Does there have any authoritative description？
I've installed CentOS 5.3+ xampp 1.7.2 (apache,proftpd and php5) +postgresql 8.4. And some strange errors appear from time to time, but can't reproduce it by wish. For example client opens a webpage on CentOS, the page can be open many times, but in some moment browser gives error as for non-existing page and when I check lampp's logs, there is only a record in error_log "[notice] child pid NNNN exit signal Segmentation fault (11)".
Or another example: client opens ssh-connection and ftp-connection. When ftp-connection got timed out and server closes it, ssh-connection unexpectedly gets closed the same moment without any errors in logs. And again it happens not everytime, but cannot be related to physical network because the same server on the same network with Fedora never had such errors. Possibly xampp-1.7.2 is not too compatible with CentOS 5.3? How to get more info from system in this case?
install Epson bx300f. I try to install from page openprinting but need lsb 3.2
View 13 Replies View RelatedI am installing Big Brother on a CentOS 5.2 running the default Apache 2.2.3. When I try to access any web page I get the following error: Forbidden You don't have permission to access /bb/ on this server. Apache/2.2.3 (CentOS) Server at fmsubbnix Port 80 So far I have:
1) Set the Directory options to FollowSymLinks
2) Verified all directory and file permissions are at 755
3) Set permissions temporarily to 777 and received same error so I am assuming the issue is in a config file somewhere
4) in hhtpd.conf verified <Files ~ "^.ht"> is correct
5) verified the "default" directory is correct (/var/www/html)
I have read and tried several ideas in posts listed on the web but to no avail and am at a loss as to what to look for next..
I am trying to solve a problem where Apache stats aren't displaying correctly in Munin. I've ran through quite a bit of checks and tests regarding Munin setup, but I think my issue is related to Apache, but my skill set there is lacking.
first, system info:
monitored server:
CentOS 5.3 2.6.18-128.1.1.el5
[code]....
When running Firefox, page loading is very slow (e.g. taking nearly a minute for a ..... video to start; even gmail is slow). This is in contrast with my performance when using, e.g. linuxdcpp (file sharing), where I get speeds over 300kbps. Here is some relevant information:
[root@cgwatson ~]$ uname -rmi
2.6.18-128.el5 x86_64 x86_64
[root@cgwatson ~]$ rpm -q centos-release
centos-release-5-3.el5.centos.1[code].....
I tried to install the miktex-tools rpm package from the miktex-tools page. Miktex-Tools I get following missing dependencys: Missing Dependency:
[code]..
