General :: Unable To Print Test Page Or Documents
Dec 26, 2010I have installed Canon LBP2900 on Red Hat 5 but it is not printing a single document. Even test page is not printing.
View 2 Replies
ADVERTISEMENT
Ubuntu :: Can Print Test Page But Not Documents?
May 6, 2010I know my driver works and that cups is up and running, because I can print off test pages to my heart's content, but I can't get any actual documents printed. I'm connected over the network at work to a Japanese NEC MultiWriter 3650n (it seems to be Japanese-only---I could find on drivers was in Japanese). It shows up in System=>Administration=>Printing. I set it as the default printer, and, as I said, it prints off test pages without a hitch. But whenever I open, say, a PDF and try to print it, the document appears to get sent, but never actually prints, and never shows up in the print queue (while the completed test pages do).
View 9 Replies View RelatedOpenSUSE Network :: Print The Test Page Nothing Happens
May 7, 2011I just installed openSUSE 11.4 on my 2 home machines. My home network lies behind a nat router but I still use the external zone setting for my firewalls. In the past to enable network printing between the two computers I opened TCP and UDP port 631. Yast would then see the remote printer, set it up and all was good. This time Yast sees and sets up the remote printer as usual. When I print the test page nothing happens. Checking the cups admin page at localhost:631 on the host machine shows the printer is set up to share but nothing is in the print que. Printing works just fine on the host computer.
View 2 Replies View RelatedUbuntu :: Print The Test Page (or Anything Else), Nothing Is Printed?
Oct 20, 2010I installed my epson stylus tx420w through cups web interface. I used the PPD file provided by the driver recommended in linuxprinting.org.But when I try to print the test page (or anything else), nothing is printed. According to the diagnostics, the printer status is "Processing page 1...", but it won't go beyond that.I've already tested it, it's fine. But won't work in ubuntu. Don't know what's going on.
View 5 Replies View RelatedFedora Hardware :: Brother AIO Printer Will Not Print Test Page
May 24, 2011I've recently installed F15 LXDE RC from the livecd and connected my USB Brother All-In-One MFC-5440cn printer. After following the Brother installation page, the Cups & LPR drivers are installed but when I'm in the cups page (http://localhost:631/admin), the printer will not print a test page or print from any application. The LCD panel on the printer does show 'receiving data' but nothing comes out. The last version of Fedora I had running was F13 and the same printer worked fine.
Are there any other printer drivers I need to install besides the Brothers? The printer does show up in the Print Manager but nothing prints. I did have this same type of issue with Mageia Beta 1 and ended up installing a2ps, which wasn't included in the original print drivers, and it is now printing. So I had to install a2ps with F15 but still no print output. Something must have changed with the recent distros causing this. After looking at the output of dmesg I see this:
Code:
WARNING! power/level is deprecated; use power/control instead
[14.867397] udev-configure-printer[587]: add /devices/pci0000:00/0000:00:13.2/usb1/1-3/1-3.2/1-3.2:1.0
[14.867991] udev-configure-printer[587]: parent devpath is /devices/pci0000:00/0000:00:13.2/usb1/1-3/1-3.2
[14.869115] udev-configure-printer[587]: Device vendor/product is 04F9:016D
[14.880470] udev-configure-printer[587]: MFG:Brother MDL:MFC-5440CN SERN:- serial:BROM5F412304
[14.880520] usbcore: registered new interface driver usblp
[15.902920] udev-configure-printer[587]: failed to connect to CUPS server; giving up .....
Any idea why it's failing to connect to Cups or any idea how to find out? Is it possible to have too many USB devices connected? I'm using a 4 port usb hub in use and also using a usb mouse/keyboard connected.
Ubuntu Servers :: CUPS Printing-Can Print Test Page & Nothing Else?
Mar 22, 2010I recently built a server from an old box using Ubuntu Server 9.10. This is my first server and I am very new to the server world.I have an Epson Stylus NX400 connected via USB. I have managed to configure it to the point where I can see the printer listed on my client laptop and can print a test page. However, I cannot print anything else. When I access the job history through the CUPS adminI can see that the print jobs were recognized and marked as complete, even though the printer never physically engaged.
View 4 Replies View RelatedUbuntu Multimedia :: Utility To Automatically Do Printer Test Page Print Job?
Mar 28, 2010I have a couple of large-format printers (Epson R2400, HP 9650) which I only use infrequently. If they are not used very often, they dry out, the print heads get packed up, it's an expensive mess to deal with when times comes to run off some prints. The printers are physically connected to a Windows machine to which my Ubuntu computer is networked.It would be helpful if there was a utility that could initiate a test page print job on the machines, which could be scheduled to run once a week or so. I've had no luck finding such a thing for Windows
View 9 Replies View RelatedFedora :: Printing From A Samba Printer Error Test Page Failed To Print
Jul 20, 2009I have a FC11 box, with an HP prineter attached. I trying to print from my laptops after I have setup samba and shared the printer , It was working fine when I was installing FC4 and FC5. I am not sure what is missing. when I tried to print from the XP box I got "Test pge failed to print" error.
View 9 Replies View RelatedUbuntu :: Print A Full Page And Then Print A Blank Page
Feb 1, 2010I am running 9.10. I have a HP Photosmart 7350 printer. I have it installed and printing. But the issue I am dealing with is that it will print a full page and then print a blank page..then a full page..then a blank page. Actually they aren't completely blank..it shows half of "2 of 6" or whatever page it is on. Like it cuts that in half and prints the 2nd half of "2 of 6" onto a separate new page.
View 2 Replies View RelatedSoftware :: Unable To Change Page Size In Kivio Print Options
Jul 31, 2009I am running OpenSuSE 11.0 KDE 3.5.9 "release 49.1" with Kivio 1.6.3. I am using Kivio to create large flow charts (paper size is 44in x36in) and I have an HP DesignJet 800PS that is capable of printing documents this size. We handle blue prints occasionally as well as when I have large documents (size wise) to print.
Anyhow I have a table relationship drawing I have created and I need to print it out. Now I have come up with a work around (save the document as PNG, import it into OpenOffice then save as PDF and print...) but when I try to print as PDF, I get the default paper size of A4 and the option to change the paper size is ghosted in Kivio. Also I only get a small segment of the actual drawing.
General :: Apache Test Page Help
Aug 11, 2011I am trying to set up a web page for the business and we have had the website or domain for a while but no one has put anything on it. I have never done anything like this before so i typed in the website and got the apache test page saying that i should add this: /var/www/html/
1) i'm not really sure what to add it to
2) i've tried adding it to the website url and that comes up with invalid page
3) could someone please explain in simple terms how i can get on to the webpage so i can start adding content to it?
Software :: CUPS - Print Jobs Shows Completed, But Page Doesn't Print?
Dec 6, 2008I initially had a problem accessing the CUPS interface (see my other post) and got that resolved by adding the user "cupsys". Now, everything "looks" ok, and when I print a test page, it shows it as completed (in CUPS). However, the page never prints.
The printer is a Canon MP600 (using the canonmp600en.ppd file to configure it). Here's the output of my conf file.
Code:
# Show troubleshooting information in error_log.
LogLevel debug
[code]...
Ubuntu :: Cannot Print PDF Files - Print Preview Shows A Blank Page
Jun 5, 2011I cannot print pdf files. I have tried using okular and xpdf. The documents display in the program, but print preview shows a blank page. The printer then sends out blank pages. I have tried printing on 2 different printers using usb cables. Using terminal to process the commands shows error:
Quote:
xxx@xxx:~$ xpdf
***** MediaBox = ll:0,0 ur:611.976,791.968
***** CropBox = ll:0,0 ur:611.976,791.968
***** Rotate = 0
Segmentation fault
Converting to .ps also is blank.
Slackware :: CUPS Print Jobs Print 1st Page OK, But All Others Are Overwritten?
Feb 26, 2011Not sure when CUPS started acting up. I have the latest 13.1 current software installed.The first page to print is always OK, but all succeeding pages are overwritten. The second page shows the first page on top of it, and the third shows the preceding pages on top of it - and so on. Has anyone else seen this problem?I guess the printer buffer is not getting flushed correctly. If my configurations were trashed in some way, I don't know where to look for a fix.
View 14 Replies View RelatedGeneral :: Get The Configuration Page For A Canon PIXMA IP1600 To Print?
Jul 20, 2011How do I get the configuration page for a Canon PIXMA IP1600 to print?
View 1 Replies View RelatedGeneral :: Screen Goes Blank For Few Minutes During Booting To Print The Login Page?
Jan 3, 2011My screen goes blank for few minutes during booting to print the login page.
When I press ctrl+alt+f1 it shows and hangs at
Enabling /etc/fstab swaps
I show below the output of some commands:
[root@ws-test ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 76G 55G 18G 76% /
tmpfs 3.9G 0 3.9G 0% /dev/shm
/dev/sda3 56G 34G 20G 64% /hdd-1
[Code].....
Software :: Can Print Documents Only With Certain Fonts
Jul 11, 2010I am running Linux Mint and have installed drivers for Xerox 3100MFP printer. I can print a test page fine, and also have no problems printing documents that are, for example written with Times new roman. However, when I try printing a document that has one of the fonts that I regulary use, I get an error message (it says something like that an error has occurred processing the document). The issue persists, if I convert the document into Pdf.
View 4 Replies View RelatedUbuntu :: Gimp Print - Only Getting Blank Documents?
Sep 24, 2010Gimp is failing to print documents correctly. It will spit out a page, whether it be PDF or an actual piece of paper, but the result is just a blank white document. I've tried printing through my HP printer, Cups PDF printer, and the default Print to File. I'm able to print documents through other applications on my system just fine.
I've done a fresh install of Ubuntu, but I'm still having the problem. I'm not sure if there are certain packages I need for Gimp to print. There are so many different PDF, PostScript, GhostScript, Cups, Foomatic, HP, etc. files in Synaptic that it's hard to tell what is important and what isn't. I'm using GIMP 2.7.2 on Ubuntu 10.10.
Ubuntu :: After Update Openoffice Documents Page Numbers And Other References Are Destroyed
Sep 27, 2010I use Ubuntu 10.04 2.6.32-25-generic kernel After I did some automatic updates, in my Openoffice documets page numbers and other references are destroyed. Example, only "pagenumber" is written instead of page number.
View 1 Replies View RelatedUbuntu :: 9.4 - Read Files (documents - ODT File (.odt)) And Print In Windows?
Jul 27, 2010My friend have a pc with only Windows. She does not want to format it for Ubuntu but wants to have a temporal partition (without deleting the original-rented Windows machine) for Ubuntu. How can incorporate the Ubuntu (no demo) without altering beyond her pc?
Second, How can she read files of Ubuntu (documents- ODT File (.odt)) in Windows? How can she print the doc's when the printer only works for Windows?
Third, how can be deleted the Ubuntu from her machine when she be able to return the pc to thye dealer?
General :: Unable To Open Documents In OpenOffice Writer
Jan 18, 2010I have a problem with regards to opening the open office. every time I open a document, I cannot view it. It says the application cannot be started. The user interface language cannot be determined. What's the possible cause on this? How will i correct this error?
View 12 Replies View RelatedFedora :: Test Page For Apache Just Blank
Jun 12, 2011I had installed and checked lamp stack last night but today when I type http://localhost the fodora test page for apache didn't come up. It is just blank. I had also configured apache to load after every boot.
View 14 Replies View RelatedUbuntu Networking :: Vista Prints Test Page But Nothing Else?
Oct 18, 2010I've installed Ubuntu 10.10 on an old box to use as an office print/fax and file server. I tried the server edition but I had no chance with command line programming so I've just used normal Ubuntu.
Ubuntu itself is working fine and I've installed my HP Officejet printer and it's fully working on the Ubuntu box. SAMBA and CUPS are installed.
I've then added the printer onto my Vista machine and here's where the fun starts. The Vista box sees the printer on Ubuntu, adds it with no problem and happily prints test pages, but I can't get it printing anything else.
I can't for the life of me find any reason why it would print a test page, but not print from Word, adobe or even a browser.
Ubuntu :: Network Printer Install - Can't Get The Test Page
Feb 21, 2011I have set up a local server running 10.04. I have cups installed and running. I can access the server via 192.168.28.200:631 webapoge. I can print test pages from that site. But when I try installing the networked printer on a client, the printer will install but I can't get the test page to print.
View 1 Replies View RelatedServer :: Httpd2.2.15 Access To Localhost Test Page ?
Jun 13, 2010Can't access localhost test page, but opens localhost page when I use full dns, at least from local network machines?
Running slackware13.1, Httpd2.2.15, 2wire gateway. Firewall web&http pinholes for ports 80,443. Port 80 is working.
Code:
Returns error:
Quote:
Code:
Code:
Added 4400host.net to Resolve DNS on 2Wire Gateway(Never had to do this before to access httpd test from same machine or network machine?
Changed HTTPD.conf
Code:
Code:
Quote:
"It Works!"
Never encountered this before, usually httpd test worked for "localhost" with minimal effort. I am concerned to procceed with this odd behavior. Has anyone else encountered this configuration is?
Fedora Servers :: Custom 403 Does Not Work - Test Page Shown ?
Jun 12, 2011I use .htaccess to deny all ip addresses except certain to an internal wiki on a subdomain.
Code:
If access is denied to the homepage users are shown the Fedora test page instead of my own custom 403 error page. When I go to a page - not home - I see a standard 403 error page.
Code:
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request. Apache/2.0.54 (Fedora) Server at wiki.domain.com Port 80. What am I missing here? Seems like my ErrorDocument is not being reached..
Hardware :: Network Printer Setup - Eth PC Only Prints Test Page
Jul 22, 2009I have 2 pc connected to a HP officejet j6480 1 pc connect by usb the other is eth via a router. The eth pc will not print anything but a test page. It it open a print box but won't give a option to print. The other pc is also on the same router. USB print fine.
View 1 Replies View RelatedUbuntu :: Canon Mp470 Printer - 10.10 - Able To Print Black And White But Unable To Print Photos
Dec 26, 2010My wife has a canon MP470 printer and running ubuntu 10.10. I am able to print black and white, but unable to print photos. I got it to work using another driver, but not the 'correct' one for this printer. I have searched a bit and don't see anything about ubuntu 10.10, just older versions. Or should I just network her to my printer....?
View 5 Replies View RelatedOpenSUSE Network :: Whenever Test Java (using This Page), It Says "Applet Crashed?
Apr 13, 2010I'm using Opera on openSUSE 11.2, and whenever I test java (using this page), it says "Applet crashed." Is there something special I need to do to get java to work properly?
View 1 Replies View RelatedHardware :: Canon BJC 4310SP Correctly Identified - Test Page Crashed
Jan 14, 2010I have been given an old Canon BJC-4310SP printer. Performing the "built-in" test print works perfectly. Using the standard CUPS installation procedure (in Debian Lenny) also worked without a hitch. The new printer was correctly identified, CUPS suggested the appropriate driver and then installed and configured the printer as directed. But asking CUPS to print its test page crashed with the following message:
"Unable to open parallel port device file: Permission denied".
