OpenSUSE Network :: Print The Test Page Nothing Happens
May 7, 2011
I just installed openSUSE 11.4 on my 2 home machines. My home network lies behind a nat router but I still use the external zone setting for my firewalls. In the past to enable network printing between the two computers I opened TCP and UDP port 631. Yast would then see the remote printer, set it up and all was good. This time Yast sees and sets up the remote printer as usual. When I print the test page nothing happens. Checking the cups admin page at localhost:631 on the host machine shows the printer is set up to share but nothing is in the print que. Printing works just fine on the host computer.
View 2 Replies
ADVERTISEMENT
May 6, 2010
I know my driver works and that cups is up and running, because I can print off test pages to my heart's content, but I can't get any actual documents printed. I'm connected over the network at work to a Japanese NEC MultiWriter 3650n (it seems to be Japanese-only---I could find on drivers was in Japanese). It shows up in System=>Administration=>Printing. I set it as the default printer, and, as I said, it prints off test pages without a hitch. But whenever I open, say, a PDF and try to print it, the document appears to get sent, but never actually prints, and never shows up in the print queue (while the completed test pages do).
View 9 Replies
View Related
Oct 20, 2010
I installed my epson stylus tx420w through cups web interface. I used the PPD file provided by the driver recommended in linuxprinting.org.But when I try to print the test page (or anything else), nothing is printed. According to the diagnostics, the printer status is "Processing page 1...", but it won't go beyond that.I've already tested it, it's fine. But won't work in ubuntu. Don't know what's going on.
View 5 Replies
View Related
Dec 26, 2010
I have installed Canon LBP2900 on Red Hat 5 but it is not printing a single document. Even test page is not printing.
View 2 Replies
View Related
Apr 13, 2010
I'm using Opera on openSUSE 11.2, and whenever I test java (using this page), it says "Applet crashed." Is there something special I need to do to get java to work properly?
View 1 Replies
View Related
May 24, 2011
I've recently installed F15 LXDE RC from the livecd and connected my USB Brother All-In-One MFC-5440cn printer. After following the Brother installation page, the Cups & LPR drivers are installed but when I'm in the cups page (http://localhost:631/admin), the printer will not print a test page or print from any application. The LCD panel on the printer does show 'receiving data' but nothing comes out. The last version of Fedora I had running was F13 and the same printer worked fine.
Are there any other printer drivers I need to install besides the Brothers? The printer does show up in the Print Manager but nothing prints. I did have this same type of issue with Mageia Beta 1 and ended up installing a2ps, which wasn't included in the original print drivers, and it is now printing. So I had to install a2ps with F15 but still no print output. Something must have changed with the recent distros causing this. After looking at the output of dmesg I see this:
Code:
WARNING! power/level is deprecated; use power/control instead
[14.867397] udev-configure-printer[587]: add /devices/pci0000:00/0000:00:13.2/usb1/1-3/1-3.2/1-3.2:1.0
[14.867991] udev-configure-printer[587]: parent devpath is /devices/pci0000:00/0000:00:13.2/usb1/1-3/1-3.2
[14.869115] udev-configure-printer[587]: Device vendor/product is 04F9:016D
[14.880470] udev-configure-printer[587]: MFG:Brother MDL:MFC-5440CN SERN:- serial:BROM5F412304
[14.880520] usbcore: registered new interface driver usblp
[15.902920] udev-configure-printer[587]: failed to connect to CUPS server; giving up .....
Any idea why it's failing to connect to Cups or any idea how to find out? Is it possible to have too many USB devices connected? I'm using a 4 port usb hub in use and also using a usb mouse/keyboard connected.
View 6 Replies
View Related
Mar 22, 2010
I recently built a server from an old box using Ubuntu Server 9.10. This is my first server and I am very new to the server world.I have an Epson Stylus NX400 connected via USB. I have managed to configure it to the point where I can see the printer listed on my client laptop and can print a test page. However, I cannot print anything else. When I access the job history through the CUPS adminI can see that the print jobs were recognized and marked as complete, even though the printer never physically engaged.
View 4 Replies
View Related
Mar 28, 2010
I have a couple of large-format printers (Epson R2400, HP 9650) which I only use infrequently. If they are not used very often, they dry out, the print heads get packed up, it's an expensive mess to deal with when times comes to run off some prints. The printers are physically connected to a Windows machine to which my Ubuntu computer is networked.It would be helpful if there was a utility that could initiate a test page print job on the machines, which could be scheduled to run once a week or so. I've had no luck finding such a thing for Windows
View 9 Replies
View Related
Jul 20, 2009
I have a FC11 box, with an HP prineter attached. I trying to print from my laptops after I have setup samba and shared the printer , It was working fine when I was installing FC4 and FC5. I am not sure what is missing. when I tried to print from the XP box I got "Test pge failed to print" error.
View 9 Replies
View Related
Feb 21, 2011
I have set up a local server running 10.04. I have cups installed and running. I can access the server via 192.168.28.200:631 webapoge. I can print test pages from that site. But when I try installing the networked printer on a client, the printer will install but I can't get the test page to print.
View 1 Replies
View Related
Feb 1, 2010
I am running 9.10. I have a HP Photosmart 7350 printer. I have it installed and printing. But the issue I am dealing with is that it will print a full page and then print a blank page..then a full page..then a blank page. Actually they aren't completely blank..it shows half of "2 of 6" or whatever page it is on. Like it cuts that in half and prints the 2nd half of "2 of 6" onto a separate new page.
View 2 Replies
View Related
Jul 22, 2009
I have 2 pc connected to a HP officejet j6480 1 pc connect by usb the other is eth via a router. The eth pc will not print anything but a test page. It it open a print box but won't give a option to print. The other pc is also on the same router. USB print fine.
View 1 Replies
View Related
Dec 7, 2009
I've configured a Xerox WorkCenter 7345 which is attached to the network. I can print to it from any application as well as via lp. The problem is that it only prints the first page of any job. I can tell it to print a specific page but if I do either All or within a range it will only do the first page
View 9 Replies
View Related
Dec 6, 2008
I initially had a problem accessing the CUPS interface (see my other post) and got that resolved by adding the user "cupsys". Now, everything "looks" ok, and when I print a test page, it shows it as completed (in CUPS). However, the page never prints.
The printer is a Canon MP600 (using the canonmp600en.ppd file to configure it). Here's the output of my conf file.
Code:
# Show troubleshooting information in error_log.
LogLevel debug
[code]...
View 8 Replies
View Related
Jun 5, 2011
I cannot print pdf files. I have tried using okular and xpdf. The documents display in the program, but print preview shows a blank page. The printer then sends out blank pages. I have tried printing on 2 different printers using usb cables. Using terminal to process the commands shows error:
Quote:
xxx@xxx:~$ xpdf
***** MediaBox = ll:0,0 ur:611.976,791.968
***** CropBox = ll:0,0 ur:611.976,791.968
***** Rotate = 0
Segmentation fault
Converting to .ps also is blank.
View 6 Replies
View Related
Feb 26, 2011
Not sure when CUPS started acting up. I have the latest 13.1 current software installed.The first page to print is always OK, but all succeeding pages are overwritten. The second page shows the first page on top of it, and the third shows the preceding pages on top of it - and so on. Has anyone else seen this problem?I guess the printer buffer is not getting flushed correctly. If my configurations were trashed in some way, I don't know where to look for a fix.
View 14 Replies
View Related
Jun 11, 2011
one month at this stage and noticed recently that all automatic updates to my system have ceased, so I tried a zypper update from the terminal yesterday and believe it or not I got 1110 updates, about 7 deletions a 3 programs were changing architecture. This went all all day yesterday and finished sometime early this morning when I had to force a reboot as the shutdown button did nothing. After all those updates I do not notice any version upgrades for a few things I checked like Office, Amarok, DigiKAM etc but I am back to a most annoying problem that I had in my first few days i.e. my printer an Epson Stylus Color 760 is totally messing up 2nd and subsequent pages in a printout.
The last time this happened it seemed to sort itself out because deleting the printers discovered and their drivers did nothing. I am sorry to say it is putting me off SUSE 11.4 which I had liked BUT it is so frustating when I can't eben print more than one page correctly. I have come from Windows 7 where these problems did not exist.
View 9 Replies
View Related
Jan 5, 2011
I install from openSUSE-11.3-NET-x86_64.iso. Installation was succesfull, but after install all packet on test internet / update was error. And after log in in installed system internet not work. I use router with DHCP
View 8 Replies
View Related
Mar 27, 2010
I have a Canon MX860 network printer but I cannot get it to connect with my openSUSE 11.2 computer
View 9 Replies
View Related
Aug 11, 2011
I am trying to set up a web page for the business and we have had the website or domain for a while but no one has put anything on it. I have never done anything like this before so i typed in the website and got the apache test page saying that i should add this: /var/www/html/
1) i'm not really sure what to add it to
2) i've tried adding it to the website url and that comes up with invalid page
3) could someone please explain in simple terms how i can get on to the webpage so i can start adding content to it?
View 1 Replies
View Related
Jun 12, 2011
I had installed and checked lamp stack last night but today when I type http://localhost the fodora test page for apache didn't come up. It is just blank. I had also configured apache to load after every boot.
View 14 Replies
View Related
Oct 18, 2010
I've installed Ubuntu 10.10 on an old box to use as an office print/fax and file server. I tried the server edition but I had no chance with command line programming so I've just used normal Ubuntu.
Ubuntu itself is working fine and I've installed my HP Officejet printer and it's fully working on the Ubuntu box. SAMBA and CUPS are installed.
I've then added the printer onto my Vista machine and here's where the fun starts. The Vista box sees the printer on Ubuntu, adds it with no problem and happily prints test pages, but I can't get it printing anything else.
I can't for the life of me find any reason why it would print a test page, but not print from Word, adobe or even a browser.
View 3 Replies
View Related
Jun 13, 2010
Can't access localhost test page, but opens localhost page when I use full dns, at least from local network machines?
Running slackware13.1, Httpd2.2.15, 2wire gateway. Firewall web&http pinholes for ports 80,443. Port 80 is working.
Code:
Returns error:
Quote:
Code:
Code:
Added 4400host.net to Resolve DNS on 2Wire Gateway(Never had to do this before to access httpd test from same machine or network machine?
Changed HTTPD.conf
Code:
Code:
Quote:
"It Works!"
Never encountered this before, usually httpd test worked for "localhost" with minimal effort. I am concerned to procceed with this odd behavior. Has anyone else encountered this configuration is?
View 5 Replies
View Related
Aug 27, 2010
In an IPv6 test environment I have installed an openSUSE 11.2 system. I have also installed telnet and it works with IPv4 (I can open a session from a Windows console with "telnet ipv4addr").
If I try to open a session with "telnet ipv6addr" I get the response: "Connecting To ipv6addr. Could not open connection to the host, on port 23: Connect failed".
Does the telnetserver support IPv6 or did I something wrong?
View 4 Replies
View Related
Jun 12, 2011
I use .htaccess to deny all ip addresses except certain to an internal wiki on a subdomain.
Code:
If access is denied to the homepage users are shown the Fedora test page instead of my own custom 403 error page. When I go to a page - not home - I see a standard 403 error page.
Code:
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request. Apache/2.0.54 (Fedora) Server at wiki.domain.com Port 80. What am I missing here? Seems like my ErrorDocument is not being reached..
View 2 Replies
View Related
Feb 1, 2011
I have Linux SuSe 11.3 installed, the printer is Olivetti PR2, it's an old passbook printer, and the printer is connected VIA SERIAL port. When installing via CUPS, i have the option for serial port available, I am trying to use all possible drivers for the printer, e.g.:
- generic postscript drivers
- IBM Proprinter II drivers
- IBM Generic drivers
- any Olivetti drivers.
The printer is in READY status, printer seems installed in CUPS, when i try to print a test page, it creates a job, printer sets to status PROCESSING, but does nothing. No printing, no sounds from the printer self. How to check, if the printer is recognized as a device in linux, and if the data can be sent to printer at all ?
View 9 Replies
View Related
Jan 14, 2010
I have been given an old Canon BJC-4310SP printer. Performing the "built-in" test print works perfectly. Using the standard CUPS installation procedure (in Debian Lenny) also worked without a hitch. The new printer was correctly identified, CUPS suggested the appropriate driver and then installed and configured the printer as directed. But asking CUPS to print its test page crashed with the following message:
"Unable to open parallel port device file: Permission denied".
View 8 Replies
View Related
Nov 15, 2010
i'm setting up apache on 5.3. i can access the apache test page without a problem from the server via URL... But i can't figure out how to access this page from another computer within the domain (for when i upload my home page.
View 4 Replies
View Related
Jul 22, 2010
I installed opensuse 11.3 in my laptop compaq presario cq40 144TU consisting of Core2Duo T5800 with 4 GB DDR2 RAM. After installation of 11.3 i update the OS from online. i have a cable net with IP address / subnet mask / Gateway / DNS. All are working fine but all of a sudden there was a power cut in our locality and my cable net was delinked.
When the elecricity came again i tried to connect the internet for online updation, but all in vain. No page is openup though the terminal told me that "You are already logged in with process id 1425." When i typed the command to kill the process it said that there is no such process running.
View 6 Replies
View Related
Oct 20, 2009
I have a lpt printer installed "hp officejet t65" when I print a file all the time on the top of the page appear the path of the file where is stored in my pc and and page 1of x. how to wipe off this information when printing a file.
View 1 Replies
View Related
