Networking :: SIOCADDRT: Process Not Exist Ubuntu 10.04 Disable Network-manager

Aug 3, 2010

ubuntu 10.04 disable network-manager. I am add : route add default gw 10.0.0.5 Terminal give me a Error: SIOCADDRT: process not exist

View 1 Replies


ADVERTISEMENT

Networking :: Error - SIOCADDRT: No Such Process

Nov 24, 2010

I am running Fedora Core 7, starting the other day, every time I run service network restart, I get the following output:

Shutting down interface eth0: [ OK ]
Shutting down loopback interface: [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface eth0: [ OK ]
SIOCADDRT: No such process

Everything works fine. I can connect to Internet, all my shares are fine, etc. I've done some poking around and found this issue in numerous postings, and it ALL seems to point to an issue with my IP and gateway. I've triple checked all my config files looking for an error and everything "appears" fine, but I can't seem to get rid of that "SIOCADDRT: No such process" error. Below are the contents of the respective files:

/etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
ONBOOT=yes

[code]....

how to get rid of that pesky "SIOCADDRT: No such process" error

View 1 Replies View Related

Networking :: Route Add - Eth0 SIOCADDRT: Network Is Unreachable

Jan 18, 2010

I want to add this route but I am getting this error message. What is the reason of this problem? I cant add this route? how can i add?

Code: [root@linux/]# route add -net 10.1.0.0 netmask 255.255.0.0 gw 10.2.0.1 eth0 SIOCADDRT: Network is unreachable

View 11 Replies View Related

Networking :: Disable Network Manager In Ubuntu 10.04?

Aug 7, 2010

How i do disable Network Manager in ubuntu 10.04 ?

View 7 Replies View Related

Ubuntu :: Prefere Networking - How To Disable Network-manager

Jan 9, 2010

I have problem with network manager ( I want static address, manual dns and so on) I used to do it in /etc/network/interfaces with the new network-manager I am lost, I prefer, at least for the moment, to continue with the classic network, how and where to disable the networkmanger.

View 3 Replies View Related

Ubuntu Networking :: Network Manager Cannot Be Re-started ( Disable/Enable )

Apr 4, 2011

Adapter: Ralink RT3090 802.11b/g/n Wi-Fi Basically, whenever I disable it, I can't get it to turn back on. If I hit Enable, it says device is not ready. What can I do to make it work ?

View 5 Replies View Related

General :: How To Disable Network Manager

Jan 17, 2010

I cant connect to the internet thru a router using dchp, i have read that the network manager is fouled up and that i need to disable it. Can i do this with out uninstalling it? also i was told to type this in to locate my ethernet card. "dhclient eth0" This is what i got dhclient Internet Systems Consortium DHCP Client V3.1.2 Copyright 2004-2008 Internet Systems Consortium. All rights reserved.

[URL]
can't create /var/lib/dhcp3/dhclient.leases: Permission denied

SIOCSIFADDR: Permission denied
SIOCSIFFLAGS: Permission denied
SIOCSIFFLAGS: Permission denied

Open a socket for LPF: Operation not permitted

View 2 Replies View Related

Fedora :: Disable Auto Loading Of Network Manager / Wpa Supplicant

Mar 18, 2011

I would like to disable auto loading of network manager/wpa supplicant in my FC13 system. I am not interested in just stopping the service (/etc/init.d/NetworkManager stop) from user lever. Is there any kernel configuration which can serve the purpose. If there is a way to stop notifying user level about new network interface, please let me know.

View 3 Replies View Related

OpenSUSE Network :: Knetwork Manager: Enable/disable Wireless To Connect

Jan 28, 2010

I have a minor problem with Knetwork-manager. When I boot up, it won't connect to my wireless router automatically. I have to right-click the taskbar icon, disable wireless, then enable wireless, then it connects fine.It remembers the password fine and once it's connected, it's flawless. It's just the minor issue of having to effectively 'switch the internet on' rather than it just being connected when I turn on my laptop.

I'm using Opensuse 11.2, KDE 4.3.1 (didn't have this issue with 11.1). I've tried the latest Kubuntu (9.10) and knetwork-manager worked flawlessly but I didn't like the rest of the OS so I came back to Opensuse If I restart, suspend or hibernate it usually connects okay, it just seems to be when I boot from 'cold'.

I've tried nm-applet but same problem. I also tried wicd but it didn't really like my system. I've changed my wireless router recently as well with no change, so I don't think it's that. As I say it's a minor problem, it's not really an issue for me to turn it on each time but it would be nice to clear it up. I've googled and searched since 11.2 was released but haven't found any answers and my linux skills are still a bit lacking.

View 2 Replies View Related

Ubuntu :: Init: Failed To Spawn Network-manager Main Process: Unable To Execute: No Such File Or Directory

May 27, 2010

I just updated from 9.04 to 9.10 (it's a long story, and I still can't go beyond 2.30).The update got rid of WICD, which is what I used and installed network-manager. Network-manager was not working at all, so I uninstalled it again and installed WICD. I could connect perfectly and had no problems.However, now the computer hangs during boot, saying that init can't start network-manager. I assume that something went wrong during the uninstalling process, since it wasn't updated.

This is the message: init: Failed to spawn network-manager main process: unable to execute: No such file or directory.

So how do I update it or manually change it so it stops requesting network-manager?

View 3 Replies View Related

Ubuntu Networking :: When Click Configure In Network Tools It Keeps Telling The Interface Does Not Exist?

Feb 12, 2010

I want to use a static ip address on my wireless network but when I click configure in network tools it keeps telling me The interface does not exist and to Check that it is correctly typed and that it is correctly supported by your system

View 5 Replies View Related

Ubuntu Networking :: Network Manager Will Not Auto-connect To New Network After Resume?

Jul 1, 2010

I recently fixed an annoying problem and I thought it would be nice to share my solution here. The problem was that after a cycle of suspend/resume, Network Manager would only auto-connect to the same network as it was previously connected to. So, for example, if I suspended my laptop at home, and then I went to school and resumed it, it would try to connect to the home network, and then just give up. It would not connect to the school network unless I explicitly told it to.irst, I'll describe the fix. If you're having this problem, you can this. Copy the following:

Code:
#!/bin/sh
case "$1" in

[code]....

View 5 Replies View Related

Ubuntu Networking :: Network Manager Stopped Recognizing Wireless Network

Jan 24, 2011

I am a Windows refugee who discovered Ubuntu as a way to save my files from my virus-ravaged computer. Had no installation discs for Windows, so when I had to wipe my hard drive and start over, I decided to give Ubuntu a try. I've had mixed success, but that's another post...

Right now, the problem is that I installed 10.10 two weeks ago and was able to connect to the Internet with no problems - until yesterday. Suddenly, our wireless network (the only one in the vicinity) does not come up as available in Network Manager. In fact, the entire wireless option disappeared. I know there are many posts and threads on here about this, but weeding through them trying to find an answer is more frustrating than actually dealing with the problem. I know the router works because I can post on this forum from the Macbook. I really like Ubuntu and would like to keep using it, but not being able to connect to the Internet now on top of the other issues I've had is making me doubt I want to continue down this Linux road.

P.S. When I attempted an analysis through System Testing, it said something about there being no proprietary drivers?

View 2 Replies View Related

Ubuntu Networking :: Sudo Iwlist Scan Works But Cannot Connect To Network Using Network Manager

Jun 14, 2010

I have used ubuntu in the past but had a lot of hardware issues with it and unfortunately moved back to windows (( BUT i have tried Ubuntu again and all seems to work great except wifi My wifi connection is sort of working because when i run SUDO IWLIST SCAN it does pull up all available networks. But in the network manager icon on the panel i left click but i see no networks and can't connect to anything. I WOULD LOVE TO keep Ubuntu and use it permanently but I must get wifi working or else this won't be possible.

View 4 Replies View Related

Ubuntu Networking :: Network-Manager Tries Always To Autoconnect To Wired Network

Feb 18, 2010

I have the problem with my notebook, that, after I used it at work, the network-manager always tries to autoconnect after boot. He has no cable network and so I get the message "not connected" after a while.how to tell the network-manager, not to autoconnect each time?

View 4 Replies View Related

Ubuntu Networking :: Network-manager And Wicd Can See But Not Connect To Network

Jul 10, 2010

I recently put Linux on a Thinkpad T40 I got. The wireless card works out of the box--I can see nearby networks. However, I can't connect to mine. network-manager would try (spin spin spin), fail, ask for the password, and then go back to the beginning and repeat indefinitely. This happened to me on a different computer, and on that one all I had to do was use wicd instead of network-manager. So I installed wicd, but it's not working either--it hangs at "Obtaining IP address".

I've found many, many threads with people who had the same problem, but none of their fixed worked for me.

I also tried to get wifi going manually, using this guide, but that didn't work.

View 3 Replies View Related

Ubuntu Networking :: Way To Ban A Wifi Network In Network Manager

Oct 26, 2010

My wifi connection drops sometimes and, for some reason, Network Manager attempts to connect to my neighbor's network, which requires a password (which I don't know). Is there any way to blacklist a wireless network so that the Network Manager will never attempt to connect to it?

View 4 Replies View Related

Ubuntu :: Archive Manager Create The Specified Directory If It Doesn't Exist?

Feb 16, 2010

Is it possible to have Archive Manager create the specified folder when I enter it into the path field? Like if I want to put something in "/Main/Sub1/Sub2" But "sub2" doesn't exist, can I just have Archive Manager create it and put the files there?

View 1 Replies View Related

SUSE / Novell :: How To Switch Network Manager From YAST Back To Efault Network Manager?

Mar 2, 2010

I had trouble connecting to a wireless network with openSUSE, so I tried the YAST network manager to see if that fixed it. Not only did it not fix it, but now I cannot connect to any network, wired or wireless. I tried to open the default network manager and it said "Network management disabled". How do I re-enable it?I also have set YAST settings back to their originals with no luck.

View 7 Replies View Related

Networking :: Mapping Network Use AND Process?

Jun 19, 2011

have a workstation, that, even after a fresh reboot, has a constant network activity.I used Wireshark on the machine, and i saw there is a constant HTTP trafic(even after a fresh reboot).I just know that my local TCP/44188 port is used to send the HTTP trafic to the web server on Internet.However; I don't know which process is doing that.How can I identify the binary responsible for using this particular TCP port and sending data?

View 2 Replies View Related

Ubuntu Networking :: Won't Connect To Network Unless Disable/enable?

Feb 7, 2011

I'm running Ubuntu in VMWare for a side project. I noticed when I boot up, it doesn't let me access anything externally. I have to disable network manager and re-enable it. Once done, I can hit everything fine. I'm using a static IP in network manager.

View 1 Replies View Related

Ubuntu Networking :: Pro Wireless 2200BG Network DISABLE?

Mar 10, 2011

Ubuntu, but I like it, and I'm trying to see how powerful it is.I got a non function wireless network card. Here the information that I be able to collect:

- Tabletop HP Compaq tc4200.
- OS Ubuntu 10.04 LTS - the Lucid Linux.
- Wireless interface: Pro/Wireless 2200BG [Calexico2] Network Connection. Vendor: Intel

[code]...

View 6 Replies View Related

Ubuntu Networking :: Networking In 10.04 - In Network Manager There Is Not Way To Select My Modem In The First Step

May 3, 2010

I'm try to create a mobile broadband connection using my Huawei E 1550 medem. but in Network manager there is not way to select my modem in the first step ( device selection step ) the drop down menu is locked. what to do ? how to configure my modem with ubuntu ?

View 1 Replies View Related

Ubuntu Networking :: Network Manager Applet Enable Networking Unchecked

Apr 2, 2011

Whenever I start up my laptop i do not get a wireless connection automatically. I have to rightclick network manager applet and select enable networking. After that everything works fine untill i shutdown and restart my laptop. I would like a way to change this so that my wifi connection is working whithout having to click something first..

OS:Xubuntu 10.04 LTS!
hardware: dell inspiron 6000
nm applet: 0.8.?

View 6 Replies View Related

Ubuntu Networking :: Networking Connections Not Listed In Network Manager

Aug 23, 2010

Neither of my wired network connections are listed in the network manager applet. I know that networking seems to be functional since I can ping local devices on the network. I can't resolve DNS names however. I suppose this is because network manager usually handles DNS? I've posted the outputs of various configurations below.

Code:

/etc/NetworkManager/nm-system-settings.cfg
# This file is installed into /etc/NetworkManager, and is loaded by
# NetworkManager by default. To override, specify: '--config file'
# during NM startup. This can be done by appending to DAEMON_OPTS in

[code]....

View 4 Replies View Related

Networking :: Tool To Monitor Network Usage By Process?

May 9, 2010

I have looked for and found several tools to show a system's total network usage. I have not, however, been able to find any that show this information in the context of individual processes. Do any such tools for linux exist?

View 4 Replies View Related

Fedora Networking :: Disable Autoneg If Not Connected To Network?

Aug 9, 2009

I am trying to boot my laptop in text mode while it is not connected to a network. A message keeps popping up " eth0 ... negotiating". Does anyboy know how to turn it off? I tried "ethtool -s eth0 autoneg off. It still won't stop. I had tried editing /etc/sysconfig/network and turning off networking by NETWORKING=no. Still the same.

When I boot in the graphic mode, this problem of pesky message does not come out. I want to use the text mode since I will use my computer for editing documents and will be using vi only. In the text mode, when I plug it to a network, the persistent message stops but returns the minute I unplug the network. I want to use it unplug to the network since I will not have access to a network all the time. By the way, I am using Fedora 11. I am using a wired DSL network. My computer can do wireless but i had it disabled or switched off.

View 4 Replies View Related

Networking :: Network Sharing Work After Disable Dnsmasq?

Mar 17, 2010

I'm sharing the wireless signal (wlan0) on my fedora 12 machine.However, when the computer starts up I have to execute:> service dnsmasq stopOnly after this, will the computer share the internet signal (through eth0).Why is that? Should I uninstall dnsmasq?I've already removed it from chkconfig:> chkconfig --del dnsmasq

View 4 Replies View Related

Ubuntu Networking :: Boot Computer And Network Manager Shos "no Network Devices Available"?

May 10, 2010

Loaded Ubuntu 10.4lucid on TransPort NX Mobile Pentium II, 328MiB,Using Netgear Rangemax wn511b. with Broadcom STA wirless driver. bcm43gx.Boot computer and network manager shos "no network devices available" Run system/administration/hardware drivers and the Broadcom STA driver shows up (only one that shows up) REMOVE and then ACTIVATE and the network manager sees it and connects fine. Shut down computer, restart and no device. I am forced to Remove and Activate each time I start the computer.Is there a way to set this driver to be found and run at computer start.

View 4 Replies View Related

Ubuntu Networking :: Network Manager Keeps Asking For WEP Key?

Feb 27, 2010

Since the last update the 'wireless network authentication required' box keeps asking me for my wep key. Everything was working fine previously, I've even re-installed ubuntu just in case it was something I did....again everything was working OK until I installed the latest Nvidia drivers and updated ubuntu.I can see my wireless connection when I click on the network manager icon I just wont connect.Wired connection works fine.

05:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved