Adapter: Ralink RT3090 802.11b/g/n Wi-Fi Basically, whenever I disable it, I can't get it to turn back on. If I hit Enable, it says device is not ready. What can I do to make it work ?
View 5 Replies
I have a minor problem with Knetwork-manager. When I boot up, it won't connect to my wireless router automatically. I have to right-click the taskbar icon, disable wireless, then enable wireless, then it connects fine.It remembers the password fine and once it's connected, it's flawless. It's just the minor issue of having to effectively 'switch the internet on' rather than it just being connected when I turn on my laptop.
I'm using Opensuse 11.2, KDE 4.3.1 (didn't have this issue with 11.1). I've tried the latest Kubuntu (9.10) and knetwork-manager worked flawlessly but I didn't like the rest of the OS so I came back to Opensuse If I restart, suspend or hibernate it usually connects okay, it just seems to be when I boot from 'cold'.
I've tried nm-applet but same problem. I also tried wicd but it didn't really like my system. I've changed my wireless router recently as well with no change, so I don't think it's that. As I say it's a minor problem, it's not really an issue for me to turn it on each time but it would be nice to clear it up. I've googled and searched since 11.2 was released but haven't found any answers and my linux skills are still a bit lacking.
Yesterday I had to use my netbooks Acer restore program to restore my win7 partition to factory settings. This morning when booting up unbuntu, I was greeted with the guild freezing every time. I also booted in classic and had the same problem. I decided to open safe mode and deactivate each program one at a time. WHen I get to network manager Unity boots fine. I then try to start Network Manager from inside of Unity after it boots and as soon as it boots, the entire computer freezes again, it was booting fine until I had to restore my win7 partition, win7 networks still work. It's and Asus Aspire One 722.
View 1 Replies View RelatedI'm running Ubuntu in VMWare for a side project. I noticed when I boot up, it doesn't let me access anything externally. I have to disable network manager and re-enable it. Once done, I can hit everything fine. I'm using a static IP in network manager.
View 1 Replies View RelatedHow i do disable Network Manager in ubuntu 10.04 ?
View 7 Replies View RelatedI have problem with network manager ( I want static address, manual dns and so on) I used to do it in /etc/network/interfaces with the new network-manager I am lost, I prefer, at least for the moment, to continue with the classic network, how and where to disable the networkmanger.
View 3 Replies View RelatedWhenever I start up my laptop i do not get a wireless connection automatically. I have to rightclick network manager applet and select enable networking. After that everything works fine untill i shutdown and restart my laptop. I would like a way to change this so that my wifi connection is working whithout having to click something first..
OS:Xubuntu 10.04 LTS!
hardware: dell inspiron 6000
nm applet: 0.8.?
I just installed 10.04, just migrating to linux. I can't see the network manager anywhere. I have the applet installed. I can't get the wifi adapter enabled. The chipset iwl8345 shows on the output when I run config. It seems to me that I need to get the NM up and that should doit. here is ishw:
ubuntu@ubuntu:~$ sudo lshw -C network
*-network DISABLED
description: Wireless interface
product: PRO/Wireless 3945ABG [Golan] Network Connection
vendor: Intel Corporation
[Code]....
ubuntu 10.04 disable network-manager. I am add : route add default gw 10.0.0.5 Terminal give me a Error: SIOCADDRT: process not exist
View 1 Replies View RelatedHow do I activate static DNS for mobile broadband. I can't find any place to write down this information. Settings are made in Network Manager - not Yast.
View 3 Replies View RelatedI recently installed OpenSUSE 11.2 and everything works fine except wi-fi card, of course. The problem is that after installation the system recognized the card (is was listed in network devices in Yast) but I was unable to enable it through network-manager applet. Though the device could make scanning through terminal (found article in docs but didn't fully understand wpa_gui). Then i was stupid enough to delete the device from Yast list to try to reinstall it. So the problem is that i simply can't do this cause i see no way to re-detect. That is the goal is to at least turn back to post-install system state and try to enable wifi card again.
View 9 Replies View RelatedNetwork Manager works for a while on Sony Vaio notebook and then it will become disable. Is there an easy way to enable it. I have installed 4 or 5 times to get it enabled. There must be a simpler way then reinstalling opensuse 11.3
View 2 Replies View RelatedI cant connect to the internet thru a router using dchp, i have read that the network manager is fouled up and that i need to disable it. Can i do this with out uninstalling it? also i was told to type this in to locate my ethernet card. "dhclient eth0" This is what i got dhclient Internet Systems Consortium DHCP Client V3.1.2 Copyright 2004-2008 Internet Systems Consortium. All rights reserved.
[URL]
can't create /var/lib/dhcp3/dhclient.leases: Permission denied
SIOCSIFADDR: Permission denied
SIOCSIFFLAGS: Permission denied
SIOCSIFFLAGS: Permission denied
Open a socket for LPF: Operation not permitted
I have a strange problem with my networking under Ubuntu. When I first log in to Gnome both my network adapters are listed as "disconnected" in the network manager applet. If I right click on the notification icon and disable networking, then wait a few seconds and re enable it, it works fine.
It's happening consistently with Maverick although it seemed only temperamental with Lucid. I did a fresh Maverick install to see if it would help but it hasn't.
It's the onboard network sockets on a Gigabyte GA-X58A-UD7. I have two ports but I only use one, it doesn't seem to matter which I use. It's connected via gigabit ethernet to a Netgear router. It works fine in Windows 7 (dual boot).
It looks as though something's not quite "ready" when gnome first launches. The light on the router for the cable is off at first, and only comes on after a few seconds. It's DHCP. Same thing happened on the live USB stick (just before the isntaller) and disable/reenable made it work.
My wireless can connect to my router without a problem, but in order to do so (after boot) I must first disable networking in the Notification Area and then re-enable it. I don't mind it too much, but when other people use my computer, it's made painfully obvious to me, that this was never an issue with Windows 7 (as much as I despise MS).
View 9 Replies View RelatedI want to make a kernel module that its function is like ifup/ifdown. However I could not find any way to do that.
View 2 Replies View RelatedI would like to disable auto loading of network manager/wpa supplicant in my FC13 system. I am not interested in just stopping the service (/etc/init.d/NetworkManager stop) from user lever. Is there any kernel configuration which can serve the purpose. If there is a way to stop notifying user level about new network interface, please let me know.
View 3 Replies View RelatedMy ubuntu system has been running really well until this morning - software update prompt appeared on the screen, so I ran with it and let it do its thing. A while after this, my WiFi network connection started failing. I've tried rebooting and then it can take up to five minutes or more for the password (keychain) prompt to appear. Once I have typed in the password the network connection starts to work. Then cuts out. Works. Then fails again.
View 3 Replies View Relatedwriting a script that will enable/disable internet connection on the one of the machines in the network(be it a DNS clearing or something else).
View 3 Replies View RelatedDisable internal wireless card & enable external? Can I do this really by network-manager or should I use some other program. If I plug-in external both are connected. If I disable internal by laptop button, I cannot enable wireless anymore in nm-applett (external on).
View 7 Replies View RelatedIm new to this Cent OS as well as Unix based Operating Systems. Please help me with the below requirement.My Company is a Serach based data collector from different websites like Google, Yahoo & many more..Collecting the data from the search engines is a issue for right now.. As many search engines are blocking us to search and retrive the date after some time.. Taking Google as example : Google Blocks my IP after every 30 mins of retriving.. Application is a Windows based & using Windows 2003 as the Server.. Would like to give a Dynamic IP to the Windows Server via 1st Ethernet Card & enable the 2nd Ethernet for the Internet..Eg : eth 0 = 192.168.1.1eth 1 = x.x.x.x (Public IP)I have check with few of my friends who told me to get Linux or Cent OS installed to do a interface disable after given time & enable a secondary device or virtual interface the next couple of seconds... Like eg : eth 1 = x.x.x.1 eth 2 = x.x.x.2 eth 3 = x.x.x.3 so on.. Would like the eth 1 to be down after 60 mins & eth 2 o be up & again after 60 mins of up time eth 2 down & eth 3 up.
View 6 Replies View Relatedi booted up my Ubuntu 10.04 and at the login promt I changed from GNOME to xterm session. Then i logged in and opened my programs and it didn't have the gtk theme enabled that i have when I start my ubuntu in GNOME session mode. How do i enable gtk themes there so everything looks pretty again? I like starting from xterm because it's very fast..
This is how it looks, notice the ugly buttons and everything... the gtk theme is not loaded and i don't know how to enable it..
[URL]
And here i will show you how it should look and how it normally looks with the gtk theme loaded up... basically i would like it to look like this even when i start it from xterm..
[URL]
Really, I would like to know how i can enable gtk themes when I run my computer in xterm session mode. Is there another application that i have to run? I don't want to run the full GNOME environment, i really don't.
I running ubuntu 9.04 server edition,I place a pci expressmodel PEX8S952 8 Port PCI Express Serial Card ,and ports are disable there is a place
View 4 Replies View RelatedI recently fixed an annoying problem and I thought it would be nice to share my solution here. The problem was that after a cycle of suspend/resume, Network Manager would only auto-connect to the same network as it was previously connected to. So, for example, if I suspended my laptop at home, and then I went to school and resumed it, it would try to connect to the home network, and then just give up. It would not connect to the school network unless I explicitly told it to.irst, I'll describe the fix. If you're having this problem, you can this. Copy the following:
Code:
#!/bin/sh
case "$1" in
[code]....
I am a Windows refugee who discovered Ubuntu as a way to save my files from my virus-ravaged computer. Had no installation discs for Windows, so when I had to wipe my hard drive and start over, I decided to give Ubuntu a try. I've had mixed success, but that's another post...
Right now, the problem is that I installed 10.10 two weeks ago and was able to connect to the Internet with no problems - until yesterday. Suddenly, our wireless network (the only one in the vicinity) does not come up as available in Network Manager. In fact, the entire wireless option disappeared. I know there are many posts and threads on here about this, but weeding through them trying to find an answer is more frustrating than actually dealing with the problem. I know the router works because I can post on this forum from the Macbook. I really like Ubuntu and would like to keep using it, but not being able to connect to the Internet now on top of the other issues I've had is making me doubt I want to continue down this Linux road.
P.S. When I attempted an analysis through System Testing, it said something about there being no proprietary drivers?
I have used ubuntu in the past but had a lot of hardware issues with it and unfortunately moved back to windows (( BUT i have tried Ubuntu again and all seems to work great except wifi My wifi connection is sort of working because when i run SUDO IWLIST SCAN it does pull up all available networks. But in the network manager icon on the panel i left click but i see no networks and can't connect to anything. I WOULD LOVE TO keep Ubuntu and use it permanently but I must get wifi working or else this won't be possible.
View 4 Replies View RelatedI have the problem with my notebook, that, after I used it at work, the network-manager always tries to autoconnect after boot. He has no cable network and so I get the message "not connected" after a while.how to tell the network-manager, not to autoconnect each time?
View 4 Replies View RelatedI recently put Linux on a Thinkpad T40 I got. The wireless card works out of the box--I can see nearby networks. However, I can't connect to mine. network-manager would try (spin spin spin), fail, ask for the password, and then go back to the beginning and repeat indefinitely. This happened to me on a different computer, and on that one all I had to do was use wicd instead of network-manager. So I installed wicd, but it's not working either--it hangs at "Obtaining IP address".
I've found many, many threads with people who had the same problem, but none of their fixed worked for me.
I also tried to get wifi going manually, using this guide, but that didn't work.
update-manager started instantly shutting down before opening for no reason. Deleted .gksu.lock in my home folder.
View 1 Replies View RelatedMy wifi connection drops sometimes and, for some reason, Network Manager attempts to connect to my neighbor's network, which requires a password (which I don't know). Is there any way to blacklist a wireless network so that the Network Manager will never attempt to connect to it?
View 4 Replies View Related
