Networking :: Error - SIOCADDRT: No Such Process
Nov 24, 2010
I am running Fedora Core 7, starting the other day, every time I run service network restart, I get the following output:
Shutting down interface eth0: [ OK ]
Shutting down loopback interface: [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface eth0: [ OK ]
SIOCADDRT: No such process
Everything works fine. I can connect to Internet, all my shares are fine, etc. I've done some poking around and found this issue in numerous postings, and it ALL seems to point to an issue with my IP and gateway. I've triple checked all my config files looking for an error and everything "appears" fine, but I can't seem to get rid of that "SIOCADDRT: No such process" error. Below are the contents of the respective files:
/etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
ONBOOT=yes
[code]....
how to get rid of that pesky "SIOCADDRT: No such process" error
View 1 Replies
ADVERTISEMENT
Aug 3, 2010
ubuntu 10.04 disable network-manager. I am add : route add default gw 10.0.0.5 Terminal give me a Error: SIOCADDRT: process not exist
View 1 Replies
View Related
Jan 18, 2010
I want to add this route but I am getting this error message. What is the reason of this problem? I cant add this route? how can i add?
Code: [root@linux/]# route add -net 10.1.0.0 netmask 255.255.0.0 gw 10.2.0.1 eth0 SIOCADDRT: Network is unreachable
View 11 Replies
View Related
May 9, 2011
I have just upgraded my ubuntu to 11.04 .After it is done ,I could install any software ,the error is as follows:
E: Sub-process /usr/bin/dpkg returned an error code (1)
I wonder what is the meaning of the error.
View 3 Replies
View Related
Mar 5, 2010
I've been using Kate for a while without any problems.
However, today I tried to install Kedit.
Then I got this message:
"There was an error setting up inter-process communications for KDE. The message returned by the system was:
Could not read network connection list. /home/mikeb/.DCOPserver_XXX__0
Please check that the "dcopserver" program is running!"
Then I uninstalled Kedit, hoping that the damage would be undone.
However, Kate still shows the same message upon startup.
So I reinstalled Kate, and got the same thing.
What did the Kedit installation mess up, and how I can I fix it so I can use Kate again?
View 9 Replies
View Related
Sep 9, 2010
I have mounted an NFS share with ISO images on my kvm Server. If i connect such a iso to a VM (using virt-manager) for installing a operating system i get the following error on startup: Error starting domain: internal error Process exited while reading console log output: char device redirected to /dev/pts/1 qemu: could not open disk image /mnt/iso/public/Linux/Distributions/Debian/debian-504-amd64-netinst.iso: Permission denied
The problem is definitly that kvm (or qemu or libvirt-bin, i don't know) tries to set permissions (rwx owner for libvirt-qemu, --- for kvm group, --- for other) on the file, although it has read permissions. Is it possible to change this behavior?
View 1 Replies
View Related
Aug 3, 2009
I am running F11 and I want to mount an FTP, but when I try to connect to an ftp server using Places -> Connect to Server, or the bookmarks I made I get an error that says 'Failed to execute child process "/usr/lib/firefox-3.5/firefox" (No such file or directory)' and sometimes it mounts anyway, but most the time it doesn't, and it never connects to the folder I asked it to, I just have to open the mount and navigate to it. I figure this happened because Firefox upgraded to 3.5.1 and the folder is now /usr/lib/firefox-3.5.1/firefox, but I don't know how to update this so that it looks in the right location.
View 6 Replies
View Related
Sep 12, 2015
I'm trying to build a backport of the package redshift [URL] ...., from stretch to jessie.
I followed these instructions [URL] .... and ended up with an error at the last step (dpkg-buildpackage).
What I did:
Code: Select allsudo apt-get install packaging-dev debian-keyring devscripts equivs
rmadison redshift --architecture i386
dget -x http://http.debian.net/debian/pool/main/r/redshift/redshift_1.10-5.dsc
cd redshift-1.10
sudo mk-build-deps --install --remove
dch --local ~bpo70+ --distribution jessie-backports "Rebuild for jessie-backports."
fakeroot debian/rules binary
[Code] ....
View 1 Replies
View Related
Apr 25, 2011
When I try to connect UbuntuOne, it gives an error -"The process did not finish successfully."
View 6 Replies
View Related
May 4, 2011
ran ubuntu tweak clean up on kernals and it failed to remove one. following this tried to search for updates and getting this error
[code]...
View 3 Replies
View Related
Mar 28, 2011
I'm writing a sort of toy shell using fork() and execv(). It runs smoothly enough untill the user enters an invalid command at which point the program hangs, so I need a way to check if the program loaded using execv returned correclty or not in the parent process and kill it if it didntI tried writing stderr to a text file to see if something whent wrong but doesnt really work out. Try running ./digenv GDM -i -Q for instance. (-Q is an invalid option for grep which the program runs at a certain point).Heres the code:
Code:
//digenv
//Carl Reg�rdh 2011-03-24
[code]....
View 13 Replies
View Related
Aug 4, 2009
Terminal will not open
Error message: There was an error creating the child process for this terminal
Got this after doing a update to testing repo; to try to fix another issue with my media player sound not working.
Solved
The_Source_HIM
Just add yourself to 'tty' group and relogin
View 5 Replies
View Related
Jan 14, 2010
I think that my computer crashed one time, while I was in middle of installing some new software, and it seems like it have made "dpkg" confused with itself - it thinks, that I still need to install "Wine", but it is allready installed, so everything is allright. But everytime, when I am upgrading or installing any kind of software, it give me this error (just an error, everything still works and installs fine):
Code:
Setting up wine (1.0.1-0ubuntu8) ...
kernel.printk = 4 4 1 7
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
[Code]....
Errors were encountered while processing: wine E: Sub-process /usr/bin/dpkg returned an error code (1)
View 6 Replies
View Related
Feb 13, 2010
I get the error
Code:
there was an error creating the child process of this terminal
When I run this code:
Code:
gnome-terminal --window-with-profile=Scripts
View 2 Replies
View Related
May 8, 2010
I work with social sciences and I really need to use "R". R is a program used for statistics and it has a module called R-commander, which let things easier to deal and comes with several options as opening SPSS files (another statistical package commonly used by Windows users) and other things. THe problem is, as Rcmdr is a module for R, when I run it, it opens a terminal window and then he runs the module, which opens a friendly gui.
It worked okay and clean in Ubuntu 9.10, but for LTS 10.4 I keep getting an error, no matter I reinstall the modules or the entire program. I even installed Ubuntu again without upgrading it from karmic Koala. But there is the same error msg.
The error message says: "Error while creating a child process for this terminal". The strange part is there is no other msgs in the terminal or errorlogs. I really need to use this software for work.
View 3 Replies
View Related
Aug 13, 2011
I have installed PostgreSQL 9.0 in Ubuntu 11.04.The following is a bit long-winded and cross-relates to PostgreSQL,I ran the PostgreSQL installation thus:
Code:
sudo su
./postgresql-9.0.4-1-linux.bin[code]....
The problem, obviously, is the "Permission denied" error. What/where am I going wrong? From my directory listing I can see that the permissions for gjd_sentinel_data are drwxrwxrwx with owner/group of postgres. On that basis I can't see why there is the problem.I am wondering if it has something to do with the psql process running as, or owned by, user postgres? Or that I am running as the wrong user? Or something else beyond my experience?
---
Ubuntu 11.04 with GNOME2 classic desktop
Single user.
Dual boot with Windows XP Home
View 1 Replies
View Related
Apr 21, 2010
I have a process which runs for a while and then due to some unknown reason ends abruptly without giving a core. I tried looking in the logs and after watching for a pattern am still not 100% sure of the reason. So I was wondering if there is a way to catch the signal which ends the process and print some values in the handler function. I have called the handler for SIGTERM and SIGABRT functions but none of these are getting triggered. I looked online and did not find any other option. Can you please suggest if tehre is any other signal that can be caught for this unknown abrupt termination.
View 2 Replies
View Related
Jun 7, 2011
Code:
root@sok-HP-ProBook-4520s:/usr/local/etc# motion
[0] Processing thread 0 - config file /usr/local/etc/motion.conf
[0] Motion 3.2.12 Started
[0] Motion going to daemon mode
[0] Exit motion, cannot create process id file (pid file) /var/run/motion/motion.pid:
View 4 Replies
View Related
Apr 30, 2009
I currently have a massive problem with my main webserver: one of the SCSI drives where I keep my htdocs seems to have failed (sd 0:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK end_request: I/O error, dev sda, sector 7797601).
Since I have no backup (dumb!dumb!dumb!) of it, I tried to copy what I could on the fly, but that failed miserably. The next idea was to umount the volume and try remounting it R-O, but I have a bunch of apache2 processes that are apparently reading/writing on it and I can't seem to find any way of terminating them. I tried via init script, killall and kill -9 but they just don't respond. Until I can terminate those processes, I won't be able to unmount the drive and try saving what's left of the data.Oh and the cherry on top of the cake: the server is 1100 miles away so I can't even access it physically..Is there any way I didn't think of to get rid of those apache processes?
View 1 Replies
View Related
Jan 30, 2010
I'm trying to customize my BackTrack4 image so I can use the live disk with my ati graphic card. While trying to put the drivers with the apt-get install ati-driver command, I get the following message:
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
ati-driver
[Code]....
View 2 Replies
View Related
Nov 11, 2010
I've some file with .sh extensions that runs some softwares.Now,how do I stop running that filesI know we run the command ./start_tomcat.sh to start the apache.Is there any command to stop that file/process or is it just kill the process to stop the process
View 2 Replies
View Related
Mar 13, 2010
Thought I could just place a hard drive with a preloaded Ubuntu install from another machine (a loaner machine) into this one; change a few drivers and be on my way. Too many errors to count. ALSA; Jack; LiveTex all cratered and I'm tired of fighting this. I've spent more than two days trying to get stuff working and if there's anything I've learned from years of experience there's a time to cut bait and run.
A clean install on the actual hardware I'm using has to be better than the hodge podge I have now.What I would like from the community is recommendations for what to do AFTER the install.
1) where can I find the most up-to-date comprehensive and exhaustive list of repositories for the Synaptic Package Manager?
2) I like to do sound and video processing. I would like to have the program applications
Qsynth, Virtual Midi Keyboard, Muse Score, Csound, GNU Denemo, and many others that either fail to start or produce no sound to work. What, besides the programs need to be loaded in order to make these work?
3) A helpful list of recommendations on what to install along with order preference. In other words 'this needs to be done before this...' on a new Ubuntu install.
In case anyone's interested: Here's a small list of some of the errors I currently have.
AlsaModularSynth - Could not open file.Qsynth1 - Failed to create the audio driver (jack) / Jack server not running.
Errors were encountered while processing:
texlive-latex-base-doc
E: Sub-process /usr/bin/dpkg returned an error code (1)
Qtractor - The audio/MIDI engine could not be started. Make sure the JACK audio server (jackd) and/or the ALSA Sequencer kernel module (snd-seq-midi) are up and running and then restart the session.
apt-get install alsa-utils - Errors were encountered while processing:
texlive-latex-base-doc
E: Sub-process /usr/bin/dpkg returned an error code (1)
Jack configuration files not found; the list is endless. Plus many errors trying to get texlive to work.
View 1 Replies
View Related
Sep 24, 2010
The problem emerged when I started to make the internal microphone and external speakers work [URL]. In either kernel 2.6.32-24 or 2.6.35-15 - cannot install any package with apt-get. Here is the error I get when installing just anything [URL]. Basically, here is it:
Code:
ERROR: Build failed. Please review the build log at /tmp/alsa-driver-linuxant.3620.log
dpkg: error processing alsa-driver-linuxant (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up libxslt1-dev (1.1.26-1ubuntu1) ...
Errors were encountered while processing:
alsa-driver-linuxant
E: Sub-process /usr/bin/dpkg returned an error code (1)
View 3 Replies
View Related
Dec 19, 2010
I have a little home server running server 8.04 and decided to check for upgrades. One of the upgrades was a new kernal update. It was able to download the update, but errors on uncompressing it. I have even shutdown the server and restarted it. Still no luck.
Here is the screen log from the update process:
(Reading database ... 49993 files and directories currently installed.)
Preparing to replace linux-image-2.6.24-28-server 2.6.24-28.80 (using .../linux- image-2.6.24-28-server_2.6.24-28.81_i386.deb) ...
Done.
Unpacking replacement linux-image-2.6.24-28-server ...
[code]....
View 1 Replies
View Related
Apr 8, 2011
when i try to update using terminal and update manager i get this error
/usr/bin/dpkg: 1: Syntax error: "&" unexpected
E: Sub-process /usr/bin/dpkg returned an error code (2)
View 7 Replies
View Related
Jun 6, 2011
While booting my fedora15, it gets stuck for about 5-6 minutes. Previously there was no problem. I don't know what made this problem. After going through the boot process, error occurred during network process. Using following command I got the result.
Code: # systemctl status network.service
network.service - LSB: Bring up/down networking
Loaded: loaded (/etc/rc.d/init.d/network)
Active: failed since Sun, 05 Jun 2011 21:13:55 +0545; 11h ago
Process: 845 ExecStart=/etc/rc.d/init.d/network start (code=exited, status=1/FAILURE)
CGroup: name=systemd:/system/network.service
Also right after the long pause following messages are printed
Code: 261.742053 usb4-1: device not accepting address 4 error -7
261.794087 hub4-0.1.0: unable to enumerate usb device on ports
I noted it down as soon as I saw the message after that long pause.
View 4 Replies
View Related
Sep 14, 2009
Is set up a postfix, dovecot + clamav server as described in the wiki. I also use the freshclam update script in /etc/cron.daily/freshclam. But my problem is i get this error message every day:
/etc/cron.daily/freshclam:
ERROR: Problem with internal logger (UpdateLogFile = /var/log/clamav/freshclam.log). ERROR: /var/log/clamav/freshclam.log is locked by another process
View 3 Replies
View Related
Jun 4, 2010
Trying to install Google Chrome from the Google repo I get the following error -Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package google-chrome-stable.i386 0:5.0.375.55-47796 set to be updated --> Processing Dependency: lsb >= 3.2 for package: google-chrome-stable --> Finished Dependency Resolution google-chrome-stable-5.0.375.55-47796.i386 from google has depsolving problems --> Missing Dependency: lsb >= 3.2 is needed by package google-chrome-stable-5.0.375.55-47796.i386 (google)
View 5 Replies
View Related
May 28, 2010
I have a minimal installation of Ubuntu, with lxde-core and some other apps I really use. Sometimes when I start the system, it hangs and nothing else happens. I hit Esc and then I see:Code:init: Failed to spawn rc-sysinit main porcess: Unable to open console: Input/Output error.I get stuck there, and the only thing I can do is to hold the power button, shutdown, boot again, and pray it will boot fine. Sometimes it does, sometimes it doesn't.
View 1 Replies
View Related
Jun 21, 2011
I am using Ubuntu after a BSOD error. Ubuntu is awesome, I can access all my windows files, however, I need to access my programs on windows. Here's what happened- I accidentally changed permissions after getting a virus. I then tried to do a system restore and during that process the computer crashed. When I try to boot to windows in every possible mode, I am always left with the dreaded blue screen of death.
View 3 Replies
View Related