Fedora Networking :: Disable Autoneg If Not Connected To Network?

Aug 9, 2009

I am trying to boot my laptop in text mode while it is not connected to a network. A message keeps popping up " eth0 ... negotiating". Does anyboy know how to turn it off? I tried "ethtool -s eth0 autoneg off. It still won't stop. I had tried editing /etc/sysconfig/network and turning off networking by NETWORKING=no. Still the same.

When I boot in the graphic mode, this problem of pesky message does not come out. I want to use the text mode since I will use my computer for editing documents and will be using vi only. In the text mode, when I plug it to a network, the persistent message stops but returns the minute I unplug the network. I want to use it unplug to the network since I will not have access to a network all the time. By the way, I am using Fedora 11. I am using a wired DSL network. My computer can do wireless but i had it disabled or switched off.

View 4 Replies


ADVERTISEMENT

Fedora Networking :: Can't Get Connected To Wireless Or The Wired Network

Apr 24, 2010

I have installed Linux for the first time on an old Gateway purchased from work. The system seems up and running, but I can't get connected to my wireless or the wired network. I have tried using the network manager, but it isn't working. I have tried reinstalling Fedora 12 I have the following LSUSB and LSCPI output.

[Code]...

View 6 Replies View Related

Fedora Networking :: Wireless Connected To Network But No Internet.

Sep 7, 2011

I just installed a dualboot win7/F15 on my laptop (dell XPS 15) and everything seems to be working fine except that when I connect to my network it is connected and the network is accessible (I can visit my gateway/ router) but when I try to visit a website it simply never ends loading it.Internet is working on win7 so it isn't my network's fault.Now I found somewhere that updating could help but since I dont have internet I can't update

View 3 Replies View Related

Fedora Networking :: Wireless PC Card Not Connected To Any Network - Driver

Dec 22, 2009

I have a Netgear WG511GE PCMCIA card, and a driver from the original installation disk. I used an ndiswrapper-utils gui called ndisgtk to install the driver. I then do the following to verify an installation:

[Code]....

Unfortunately, when I put the PCMCIA card in, nothing happens. On Windows, a green light flashes even if the card is not connected to any network. At first I thought this might be a hardware issue, so I did #lspci and got:

[Code]....

Lo and behold, when I put a different unbranded Wireless PC Card in it works. I'm no expert in Networks, but to me this suggests a driver problem (i.e. the card is physically detected it just won't work). However, the correct driver was installed with ndisgtk and this was verified with #ndiswrapper -l, hence the confusion.

I'd be grateful if anyone else has had this problem/knows of this problem and is willing to share the solution with me/point me in the right direction. So far, Google has returned a few posts from a few years ago talking about patching kernels and manually building files etc (just before Prism54 became integrated into the Linux kernel).

View 8 Replies View Related

Fedora Networking :: Delaying Fstab Mount Until Network Fully Connected

Nov 25, 2010

I am trying to mount a directory from my server onto my wireless laptop. The directory mounts successfully if I am already logged into the laptop with another account first but if I log on initially with the user who requires the mount the mount fails. I suspect the mount is taking place before my network connection is up, is it possible therefore, to delay the mount in fstab until the network is fully connected?

View 3 Replies View Related

Fedora Networking :: No Internet Connection Although Network Manager And Icon On Upper Bar Says Connected

Jun 22, 2011

I recently installed fedora 15 on my computer but I have a huge problem. I can connect to my router wirelessly for a couple of minutes only. Afterwards my computer has no Internet connection although the network manager and the icon on the upper bar says that i am still connected. I tried editing the /etc/rc.local and /etc/resolv.conf as mentioned in other posts in here bit no luck so far.

View 6 Replies View Related

General :: Networking - Network Card - Connected To Network - Given Access Point - No Connection?

Apr 3, 2010

I installed the driver for my network card. iwconfig and ifconfig are all responsive to connecting to the network, I'm given an access point address. Then, I try to connect to a website and no dice. ping www.google.com yields no result. What gives?

View 2 Replies View Related

Ubuntu Networking :: Connected To Network But No Internet / Get That?

Feb 24, 2011

On the 25th of January, one of my computers randomly stopped being able to connect to the Internet. It was running a dual boot (Ubuntu 10.04.1 LTS & Windows XP SP2), and is connected to the network via an ethernet cable (no wireless). According to the Network Manager, everything is working okay (there was no change from when I was able to access the Internet).

When I would use Firefox, I would get the message "Waiting for (page)...". However, this is not a Firefox only problem, as every program requiring Internet access (e.g. Evolution) is unable to connect to the Internet.

I compared the Internet settings to those of my father's Windows XP SP1 computer, which is able to connect to the Internet. There was no difference, except for the IP Address and Hardware Address. Because of this, I incorrectly deduced that either the actual Ethernet cable or the wall plug was faulty. I tried using a different cable and connecting to the Ethernet wall plug used by the aforementioned computer. Nothing changed. I was still unable to connect.

I didn't worry about it until Tuesday, when my other computer had exactly the same problem. It is running a triple boot between Ubuntu 10.04.1 LTS, Ubuntu 9.04 and Windows XP SP2, and I am unable to obtain Internet access using any partition. As with the previous case, my computer showed no change in the Internet settings, and the computer also shows it as being connected to the network. It is also connected via an Ethernet cable.

View 1 Replies View Related

Ubuntu Networking :: 10.10 Connected To Network But No Internet

Mar 13, 2011

I have a Toshiba Satellite L505D-GS6000, and I installed Ubuntu before and it worked flawlessly until I decided that I had to go back to Win7 because of certain program compatibility issues.I'm back here trying to set it up and am having no issues except for with my wireless. I can see all of the SSID's, I am able to connect to my wireless, and it displays that I have been assigned an IP and all of the other settings given by DHCP.

I have been trying to fix this for hours, googled, searched these forums, and have spent time with some people on the Ubuntu IRC channel and we are unable to come up with a fix.

Print out of sudo lshw -C network:

Quote:

*-network
description: Wireless interface
product: RTL8191SEvB Wireless LAN Controller
vendor: Realtek Semiconductor Co., Ltd.

[code]....

The strange thing is that although nothing will load when I try to visit facebook.com, google.com, or any other website... I opened the update manager and I noticed that it would download for 30ish seconds, stop and do nothing for 60ish seconds, resume for another 30, stop, resume, etc. until it finished. I am able to ping my router, and 8.8.8.8, but I am unable to ping [URL].

View 9 Replies View Related

Networking :: Get Connected To A Wireless Network That Only Allows DHCP?

Jan 16, 2009

I have a WET54g bridge that I am trying to get connected to a wireless network that only allows DHCP. The idea behind it is that I would like to connect the Cat6 out of the bridge to a switch allowing multiple wired computers to connect to the wireless network. The bridge will easily connect to the network once I put the WEP key in, however, there is a kink after that. When I connect the Cat6 to my computer and request an IP for that computer, it self assigns. This tells me that it is not talking to the wireless network through the bridge.

I can not find which IP address the bridge was assigned so that I can talk to it. The sub net is 255.255.240.0 which leaves quite a few possibilities. I know that the bridge is, however talking to the wireless network because the light is steady on the front of it which indicates just that. One other thing to stack on is that I know that there is a "splash page" which comes up when any computer connects. You click on the agreement and then you are allowed onto the network. How can I get my computer to talk through the bridge to the wireless network?

View 1 Replies View Related

Ubuntu Networking :: Loopback Won't Work When Not Connected To Any Network?

May 6, 2010

I'm using Wordpress on Apache localy to keep a diary (it's convenient because of the tags).
When I'm connected to any network (be it wired or wireless) my Apache (and Wordpress, of course) works just fine. But as soon as I go offline, I can't access the web server neither through browser nor by telneting to the 80th port. Pinging localhost works just fine.Here is my ifconfig when offline and when online:Online:

Code:
eth0 Link encap:Ethernet HWaddr 00:24:54:6f:07:aa
UP BROADCAST MULTICAST MTU:1500 Metric:1

[code]...

View 7 Replies View Related

Ubuntu Networking :: Can't Ping Localhost When Not Connected To Network

Jul 8, 2010

I'm having trouble pinging localhost, specifically, pinging localhost when I'm not connected to a network. When I try it keeps telling me the operation is not permitted:

Code:

matt@mubuntu:~$ ping localhost
PING localhost (127.0.0.1) 56(84) bytes of data.
ping: sendmsg: Operation not permitted
ping: sendmsg: Operation not permitted

if I connect to the network, start pinging then disconnect it continues pinging. Google seems to think it could be something to do with my iptables setup:

Code:

matt@mubuntu:~$ sudo iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination

[code]....

When not connected to network

Code:

matt@mubuntu:~$ route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo

But as far as I can tell there isn't anything in there which would stop me connecting to the localhost (I also can't connect to my local apache instance when offline)... (It's worth mentioning that a couple of weeks ago I had the pc setup to share it's internet connection with a laptop, ala this guide, however I've since disabled the iptables rules and disabled ip forwarding.)

View 4 Replies View Related

Ubuntu Networking :: Wireless Network Detected But Not Getting Connected

Aug 15, 2010

I've installed Ubuntu 10.04 32 bit version(dual OS) on my 64 bit Pentium core2 duo 2.2GHz processor. Everything seems to be working fine except it's not getting connected to wireless network, although it's detected the network .It was working fine(got connected to wireless network) when I had installed the same OS via virtual machine.

View 9 Replies View Related

Ubuntu Networking :: 10.10: Connected To My Wireless Network, But No Internet?

Nov 9, 2010

I upgraded to 10.10 the day it came out, and haven't had any problems with internet stuff. My wireless card works without any proprietary drivers. Last night, the computer stopped connecting to the internet. I am still connected to my wifi network, but I can't do anything online. I had assumed that my internet connection was just down in general, and tried resetting the computer, shutting down the computer and then turning it on again, and rebooting the modem, but then my Xbox connected, and my laptop running 10.04 connected, so I'm confused as to what is going in. Any ideas?

View 2 Replies View Related

Ubuntu Networking :: Auto Eth0 Connected But No Network

Jul 21, 2011

I am using BSNL broadband ISP and I am able to get network on windows os but not on my ubuntu.( I have a dual boot). I see Auto eth0 connected from the notification but when i am pinging [URL]... it says unknown host.

View 9 Replies View Related

Networking :: OpenWRT Is Connected To Internet But Network Clients Can't?

Nov 20, 2010

got an asus wl500gp v2 and i just had to reflash it. Flashing went through fine, but while setting up the PPPoE connection I got stuck. Here is what the configuration looks like:ADSL Modem ---Ethernet--- Router ---Ethernet--- Laptop I set up OpenWRT to connect over PPPoE over the WAN port and the connection is established:

PAP authentication succeeded
peer from calling number XX:XX:XX:XX authorized
replacing old default route to br-lan

[code].....

View 3 Replies View Related

Networking :: Connected To Wireless Network But No Internet Access?

Sep 17, 2009

if i'm connected to my wireless network it only gives me internet acces for a few minutes. The connection with my network stays but i have to close it back of and reconnect before i get back online.

View 1 Replies View Related

Networking :: Find The IP Address Of Connected Network Drive?

Mar 31, 2011

I desire to access a WD Netcenter network drive from Ubuntu 10.10 using NFS mounts.Several on line helps show how if you know the IP address of the drive. How can I discover the IP address of the drive. My Windows network is using DHCP, though I understand that the drive uses a static address. I know the MAC address of the drive. As a user (but not an administrator), I have much Unix experience.

View 3 Replies View Related

Networking :: Wireless Network Connected But Firefox Not Browsing?

Feb 2, 2010

I have installed the latest released version of openSUSE, 10.3 or so, and I am having an issue getting the internet to work. The system tells me that I am connected to my wireless network, but firefox does not browse, indicating that it cannot find the network. I'm totally stumped because if my wireless network is connected, why can't I browse?

View 3 Replies View Related

Fedora Servers :: PC Connected To Network / But Can't See Other PCs Or Mac

Jan 11, 2011

I just loaded F14 and want to use it as a file server. Not even certain where to get started. PC connected to the network, but can't see other PCs or Mac. thoughts?

View 7 Replies View Related

Ubuntu Networking :: Wired Network Connected, But No Internet Access?

Mar 24, 2010

Background infoMy laptop (MySN MG6.c) is dual-booted with Windows 7 and Ubuntu 9.10, and connected to the internet through a router (Digitus DN-11004-O), which is set-up to use DHCP. The internet connection works fine under Windows, and my previous laptop, which also ran Ubuntu 9.10, had no problems connecting to the internet through that router.The network adapter is an Atheros AR8131 PCI-E (also detected as Attansic under Ubuntu)stem infoResults from running various diagnostics (I have removed the output that relate to the wireless connection, as I don't use it):

Code:
$ uname -a
Linux valyria 2.6.31-14-generic-pae #48-Ubuntu SMP Fri Oct 16 15:22:42 UTC 2009 i686

[code]...

View 2 Replies View Related

Ubuntu Networking :: Wireless Does Not Work (gets Connected To Network Successfully)

Jun 10, 2010

I just upgraded to 10.04 from 9.10 and I ran into few issues.

Laptop - Dell Vostro 1520
OS - Ubuntu 10.04 64 bit

Issue - My wifi connects to the network properly and shows connection established. But I am not able to browse. I tried ping and I didn't got any response. But I was able to get response when I use ethernet (wired connection) and I am able to browse. No issues with wifi card as my wifi is working properly from Windows and with the same network. I did a complete update again before posting this and it is yet to be resolved. Here are the output of some commonly asked outputs with wifi enabled and connected:

1. sudo lshw -C network

Quote:

*-network
description: Ethernet interface
product: RTL8111/8168B PCI Express Gigabit Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.

[code]....

View 9 Replies View Related

Ubuntu Networking :: D-link DWL-G122 Connected To Network But Can't Download?

Jul 8, 2010

I had Xubuntu 9.10 installed on my computer and everything worked fine, i could download and surf the net pretty fast, but all of a sudden i couldn't do this anymore. The adapter was still connected to the network but when i opened firefox it worked for 5 seconds and then it would not load any pages, and even synaptic couldn't download any packages, even though it was still connected to the network. So i tried to reinstall network manager but it didn't work, then something happened and i couldn't access my Xubuntu anymore so I decided to delete the partition and install Xubuntu 10.04. I still have the same problem. What should i do? I am sure it is not a problem with the adapter because it works on the Windows partition.

View 6 Replies View Related

Ubuntu Networking :: Can't Find HP LaserJet 3015 On Network - Connected To A Win 7 PC Through USB?

Sep 1, 2010

I just installed Ubuntu 10.04, 32 bit, yesterday on my Dell Latitude 6500E and I am new to Linux. I can't find my HP LaserJet 3015 on my home network, even though it is connected to a new Windows 7, 64 bit PC thru USB. The other Windows PCs find it fine, and all 4 PCs can see each other on the network. So, I installed the HP software (http://hplipopensource.com/hplip-web...all/index.html) and that went smoothly, but the printer is still invisible. I also added Samba and that works great like everything else. I plugged the printer in directly to my Ubuntu laptop's USB port and it printed instantly. Now, if I could just print to the LaserJet on the network. Anybody got this one figured out? Does Wine provide a way around this?

View 1 Replies View Related

Ubuntu Networking :: Directly Connected Network Printer Unreachable.

Oct 3, 2010

I have a network printer directly connected via ethernet cable to an Ubuntu netbook, but pinging the printer fails, giving "Host Unreachable". The network light on the ethernet socket is lit green, and there is nothing else cable-connected to the network - just a simple cable connection between the netbook ethernet socket and the Network printer (a HP Laserjet 4200n). Ping works fine if I plug the cable into a different machine (a Win XP box) and ping from there, so it's not a cable or IP address problem.

This sounds simple enough and should work, but I'm stumped. Clues, anyone?

View 2 Replies View Related

Ubuntu Networking :: Multiple Network Interfaces (one Connected At A Time)?

Oct 15, 2010

configure a server with two network interfaces? This system is physically moved from one network to another every few days (different buildings but connected by a VPN). I'd like to be able to control the IP address of the system depending on which port I plug the network cable into with a static setting. Right now the system will connect to the local network, but any requests to go beyond the subnet get lost. The only way I can get the system to talk outside of its subnet is to comment out the second interface.

/etc/network/interfaces:

auto lo
iface lo inet loopback
auto eth0

[code]....

View 2 Replies View Related

Networking :: Ping Windows Machine Connected To An Open Network?

Jul 9, 2011

I am trying to ping my Windows machine connected to an open network (I'm at a internet caf) from my linux VM (also connected to the same network with a usb adapter), but I'm obtaining this output:

# ping 10.23.47.12
PING 10.23.47.12 (10.23.47.12) 56(84) bytes of data.
From 10.128.128.1 icmp_seq=1 Packet filtered
From 10.128.128.1 icmp_seq=2 Packet filtered

With high probability host 10.128.128.1 is a firewall or some router with packet filtering mechanism; but I don't understand how it can be possible to implement this kind of solution, with what kind of software or hardware? I also tried a nmap scan to my Windows machine but it returns me scan results from another host(the firewall or the router I suppose):

nmap -sS -O -P0 10.23.47.12
Starting Nmap 5.51 ( http://nmap.org ) at 2011-07-09 15:46 CDT
Nmap scan report for 10.23.47.12
Host is up (0.097s latency).
All 1000 scanned ports on 10.23.47.12 are filtered

[Code]...

So my questions is, how is technically possible to implement this kind of restriction within hosts connected on the same network? It's the first time I see this kind of configuration.

View 1 Replies View Related

Fedora :: Yumex 'not Connected To A Network' Error

Jan 23, 2010

After doing updates a few days ago yumex stopped working. I started getting an error message when I try to run it, "no connected to a network". This is of course not true.

I've looked at yumex.conf and don't see anything wrong, and I downgraded the GTK2 packages from a post indicating a segfault issue with one of those packages.

yum works fine from the command line, so my system is fully updated.

I removed yumex and then reinstalled it with no joy.

View 12 Replies View Related

Ubuntu Networking :: (fluxbuntu) Network Remains Connected; Internet Connection Sometimes Not Available?

Apr 10, 2010

I'm running Ubuntu 9.10 with fluxbox installed. Occasionally my internet connection will stop working, but when I check on wifi radar, I'm still connected to the network. The router is not plugged into a computer at the moment, just the cable jack. It is likely a hardware problem however, since my other laptops also experience disconnects. Any help beyond "change the cable" would be greatly appreciated. For instance, even though I am connected to the network, I cannot post at the moment due to lack of internet connection.

View 1 Replies View Related

Ubuntu Networking :: 10.04 Wlan0 Connection Drops Network Manager Indicates Still Connected?

May 13, 2010

I can connect to the wireless at my school, but the connection drops frequently and regularly. Network Manager still shows bars indicating the network strength and shows that it's connected to the network in the dropdown. Selecting the network again causes it to indicate that it disconnects and reconnects. At this point I have wireless until the connection drops again. Possibly relevant details: This is the Purdue PAL2.0 network, which can be tricky to connect to, particularly for Linux users. It's a hidden network using WPA2 and PEAP. My computer is a Dell Inspiron 1420n laptop, circa August 2007.

[Code]...

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved