All I really want to do is add a back command to the side button on my Microsoft Intellimouse 3000. I tried configuring xinput based on posts from this forum and a bunch of stuff changed in terms of the mouse, but not the desired action.it looks like it should be easy, but I'm too new at this to make it happen.
View 1 RepliesI am really having a tough time in installing emerald themes. I have installed emerald theme manager and have done all the required processes but I dont know what to do after I import it to theme manager?
View 1 Replies View RelatedI have dual boot Fedora 8/XP. My net seams to be moody only in my fedora sometimes I have wait as long as 30 sec for the page to load where as in my windows it's fine no such delay. This happens randomly yesterday night I had tough time accessing this forum (in addition to other sites) now it's working fine.
View 1 Replies View Relatedhow I can save xinput settings? I'm running Peppermint Linux on an eeepc 701.After a few weeks, I've finally figured out which settings to configure with the xinput command to get my touchscreen working correctly. However, when restart the netbook all the settings are lost and I have to reconfigure each time. I've found threads saying to save settings in xorg.conf file, but apparently my system doesn't have this file.
View 4 Replies View RelatedMy mouse has high dpi and is too fast even on lowest speed and acceleration settings.
To fix this I always run the following command via the terminal code...
I'm writing a udev rule to disable the trackpad when a mouse is plugged in, and I'm having a bit of trouble re-enabling the trackpad when the mouse is disconnected.Here's the script that the udev rule calls (with the appropriate argument of course).
Code:
#!/bin/bash
. /home/holden/.bash_env/backup
[code].....
after migrating my Ubuntu box from 10.4 to 10.10 my middle click button does not work.
If I test using ...
Code:
xinput test <device id>
... all my buttons are mapped but one (the middle click): when I use it nothing is logged in the console.
This is the ouput of my mouse properties:
Code:
~$ xinput list-props 8
Device 'Razer DeathAdder':
Device Enabled (117):1
[Code]....
I use middle click frequently (opening links in new tabs in Firefox or Copy&Paste in terminal)
i need to have the time of occurence for mouse event in xinput,right now i run
Code:
xinput test <device_id> >log.txt
(for finding device_id using xinput list)
[code]...
I'm having a problem with my touchpad being recognized.It works fine in Win7, but when I load Debian the touchpad doesn't work and isn't listed in xinput.When I first installed Debian, the touchpad worked for a minute, then the computer went to sleep. I woke it up and the touchpad wouldn't work. Since then, the touchpad does not work.
View 7 Replies View RelatedI have a Elo AccuTouch 2216 USB touchscreen that seems automatically supported by a clean install of Ubuntu 9.04.
However, to actually use it correctly, I need to run some xinput commands to invert the Y axis and calibrate:
Code:
These properties are shown by xinput list-props and documented as properties in the evdev Xorg input driver man page.
My questions is - where can I configure or save these settings so I don't have to ever enter again? On older versions of Ubuntu for serial touchscreens I'd add to xorg.conf, but that seems to be depreciated and these are listed as properties instead of options.
I am trying to follow this tutorial below so that I can get Text to the right of icons on the GNOME desktop. [URL] Everything so far has worked fine, except when I get to step 3 where I compile Nautilus. When I try to run the command ./configure --prefix=/usr It tells me bash: ./configure: No such file or directory
View 5 Replies View RelatedI found a tool made for Ubuntu called Xautoclick. I downloaded it and it is called "xautoclick-0.30.tar.gz" The installation notes say "tallatBe sure you have the proper development packages for your distribution installed (i.e. something like xserver-xorg-dev, gtk2-dev, et cetera). After that, run:
./configure make sudo make install" I have no clue what to do... I typed in "./configure" in the terminal and it says "bash: ./configure: No such file or directory?
kpilot worked just fine with my Palm Tungsten T3 on OpenSuse 10.3. I recently upgraded to 11.2 and have had numerous problems. It took me a while to get the hardware talking (documented in another thread), but now the sync is proving to be problematic. A hotsync happens - and I can also sync fully with jpilot, but the sync isn't going anywhere. I'm hoping to sync with kontact, but it's impossible to tell as kpilot hangs whenever I try to configure the conduits through the "Configure kpilot" menu item. When syncing, the log complains of missing conduits:
Version: KPilot 5.3.0 (KDE 4.3.0)
Version: pilot-link 0.12.3
Version: KDE 4.3.1 (KDE 4.3.1) "release 6"
Version: Qt 4.5.3
[Code]....
I have tried to install and configure Hudson in centos distro version 5.Installed hudson with tomcat by deploying .war files.after configuration was completed, builded a project.It displayed build was completed successfully.but I was not able to download output of build.
So I rechecked configuration,found that i havent set artifact file pattern to archive. how to set artifact file pattern and how to get build output. how to manage hudson by using configure system and configure options.what is the correct way to configure public hudson?.
I want to install a program from this website http:[url].... and i download the option " hydra-6.3-src.tar.gz".i tried following the instructions on this page: https:[url].... but when i get to the ./configure step it says "bash: ./configure: No such file or directory"
View 9 Replies View RelatedAlright setting up a friends netbook, display has been a little iffy (slow. glxgears is giving like 100fps). Couple issues: xorg.conf doesn't exist (i know thats typically not an issue) and "sudo xorg -configure" and "sudo xorg --configure" both return "xorg command not found."
glxinfo say that its using Mesa for the software rasterizer and that the driver is from mesa. lspci says the VGA controller is from Intel. I'm thinking xorg is defaulting to vesa for drivers, but I need to know how to change that to the open source intel driver
I am trying to install the IDS component barnyard2 on RHEL 5. I am following the snort enterprise insall document by Patrick Harper. For installing barnyard, after the tar command it says to perform a ./configure --enable-mysql The --enable-mysql does not work: configure: WARNING: unrecognized options: --enable-mysql --with-mysql does work. Is there a difference? Next, using --with-mysql, I get a failure at the end:
ERROR! Libpcap library/headers (libpcap.a (or .so)/pcap.h) not found, go get it from Open Source and Linux Forums dot tcpdump dot org TCPDUMP/LIBPCAP public repository or use the --with-libpcap-* options, if you have it installed in unusual place. Also check if your libpcap depends on another shared library that may be installed in an unusual place I do a find / -name libpcap* and get:
/usr/share/doc/libpcap-0.9.4
/usr/lib/libpcap.so.0.9.4
/usr/lib/libpcap.so.0
/usr/lib/libpcap.so.0.9
/usr/lib64/libpcap.so.0.9.4
/usr/lib64/libpcap.so.0
/usr/lib64/libpcap.so.0.9
How do I tell the configure to use one of the above? I don't understand how to use the --with-libpcap-* option?
I've got a machine on my network that's just running default Ubuntu 9.10, but I was considering setting up a network dhcp service on it to manage my machines. As such I was just wondering about configuring the iptables for it.
Reading about, I believe all incoming connections are dropped by default in a standard installation of Ubuntu anyway. If so, is it simply a case of enabling UFW and using it to allow the appropriate port for the dhcpd service and not touching anything else and everything should remain secure?
is it possible to configure one static ip such as 203...... and then 192....
View 9 Replies View RelatedI'm running Ubuntu 9.10 in VirtualBox (OS X host) with Apache 2.1.12. I am developing in NetBeans on OS X and would like to FTP my code to Ubuntu to test on Apache. However, I'm not sure how to install mod_ftp in Apache on Ubuntu.
View 2 Replies View RelatedWHY I can't enable my 3rd and 4th monitor on Ubuntu 10.04? Does it have anything to do with xorg? I can easily do it in Windows! In ubuntu ATI control center will recognize the 3rd monitor but DO NOT let me enable it... the same about the video card! I tried to do it manually changing xorg.conf but it totally ignores it! I found this thread: [URL]Does it have anything to do with XRandR? I managed to get the Crossfire working and enable it after put two identical cards. I've tried adding a 3rd card to even try a 4th monitor but it will not let me at ALL... WHY THIS?? I can do it in Windows but I do not want to use Windows! Why do not allow to use more than 2 monitors??? I'm running a clean new installation of Ubuntu 10.04 64bit and I've installed the ubuntu drivers for my video card. I've a double ATI HD 5770 (crossfire) and a third video card in the motherboard (Asus M4A89GTD Pro/USB3).have 4 monitors, 3 in the crossfire and one in the motherboard. I've managed to do it in windows but in linux I can get max of two monitors working...
View 1 Replies View RelatedMy Internet connection with Firefox web browser is working just fine, but my Thunderbird email client keeps timing out. Ive been told it isn't correctly configured.To assist, the email provider is Hotmail and the client is presently set up for a POP server.
View 1 Replies View RelatedI recently tried to configure a second monitor on 10.4. Since then I have not been able to log into the desktop. I get the video card at boot, then the ubuntu splash screen and then nothing!
How do I correct this? The video card is nvidea and I guess the configuration file is corrupt but I can see no way to reset/install this.
how to configure apt-get such that it will ask for authentication (user name and password) each time while accessing the Internet via proxy host, somewhat like sudo command. I don't want my username and password to be saved by apt-get in the apt-get configuration file.
View 2 Replies View RelatedSo i would like to change around grub, and i tried looking in /boot/grub/menu.lstbut apparently in Ubuntu 10.10, it doesn't exist anymore? So where is it?
View 4 Replies View RelatedI cant set compize animations. In Lucid I could set the animations for maximize,close,minimize but in maverick I cant seem to get that working. I do the same that I did in Lucid, Go to Effects > Animations and select check box all to get random effects. One more thing, The flame effect is also missing there.
View 8 Replies View RelatedFor some reason, when I use "./configure" to set up tarballs (.tar or .tar.gz), it gives me this error:
Code:
*** Could not run GTK+ test program, checking why...
*** The test program failed to compile or link. See the file config.log for the
*** exact error that occured. This usually means GTK+ is incorrectly installed.
configure: error: Cannot find GTK2
[Code].....
Im trying to install a program (Celtx, a media pre-production assistant) that Ive downloaded as tar.bz2 file. Ive unpacked it, moved it into my Home folder, and then wanted to configure, make and install it through the terminal.
However theres no configure file (and no readme, help or install file either for that matter).I can cd to the Celtx folder in the terminal and then start the program with ./celtx but thats a bit tedious.How would I install it 'properly' if the ./configure command doesnt work?
I would like some help with Conky. I have no Idea how to configure it and all the guides are soo confusing to me. I would like it to be clear, have some basic PC info about my computer and show me the weather.
View 3 Replies View RelatedWhich is the best firewall in ubuntu10.10 and how to configure it so that hackers do not get access to my computer, I also do use torrent.
View 4 Replies View Related