Ubuntu :: Configure Two Static Ip
Apr 26, 2010is it possible to configure one static ip such as 203...... and then 192....
View 9 Replies
ADVERTISEMENT
Ubuntu Networking :: Configure Static IP - Use Of 'network'?
Apr 15, 2011I'm setting up a home webserver with Ubuntu 10.10 and want to configure the interface to static. I'm using a router, which is setup and working correctly. I have been using linux workstation with dhcp for some time.
I've edited my interfaces file to reflect the parameters for setting static ip, with the exception of 'network'. No matter what I put into this setting, it causes me to loose connectivity to the outside world. I've tried to put my router IP, and my IP set by my provider. What should the 'network' value be?
At this time, my 'interfaces' files only includes the following and has connectivity out to the internet:
Code:
Do I need the 'network' settings as shown in every tutorial (but never explained)?
Ubuntu Installation :: Configure A Static IP Address On Karmic?
Jan 22, 2010I am currently using transmisson on ubuntu 9.10 however want to switch over to Utorrent using wine to get more options as rss feeds etc.. I will still use transmission some aswell.
I want to see if there is a guide on how to configure a static IP address on karmic?
I have found the following how to on port forward (my router WNDR3300 for utorrent) [URL]..but this pertains to using windows and not linux. I am also a linux noobie.
Ubuntu Networking :: Configure Wlan0 Interface With Static Ip?
May 19, 2010I've looked everywhere and tried everything. All I want to do is set up a static ip with my wireless network interface wlan0.
View 5 Replies View RelatedFedora :: Configure A Static IP Address (14)?
Apr 3, 2011I am trying to establish a static IP address using the instructions I found at:I cannot find this file in Fedora 14:Code:/etc/sysconfig/network-scripts/ifcfg-Auto_eth0
View 8 Replies View RelatedOpenSUSE Network :: Configure Static Ip Using The Terminal
Jan 24, 2010I was trying to configure a static Ip on openSUSE but didn't get very far...I would like to do it through the terminal.
View 4 Replies View RelatedNetworking :: Configure Static Routing Between Two Different Subnets
Aug 25, 2010In configuring static routing between two different subnets.
I have two different subnets as mentioned below:
I have a linux machine with two NICs on which i would like to configure static routing. details of the NICs are as mentioned below:
I have configured the gateway as 10.77.77.1 on machines which fall under 10.77.77.0/24 subnet and 172.16.40.1 on 172.16.40.0/24 machines.
My main motive here is i want communication to happen between both the subnets.
If the following modifications to route-eth0 and route-eth1.
Programming :: Static Linker With Make Configure
Oct 2, 2010I need to compile a program and make it portable to other computers, but it needs some external libraries and I don't want them to be linked dynamically, I would like to compile them as one single executable or at least compile them in the same directory as the main output files. The program is sphinx>, it has its own configure and make scripts. I know I can run g++ with the -static flag, but I don't know how to do this with make or configure. This is the ./configure --help output
[Code]....
Ubuntu :: 10.4: Networking - Using Bind9 And Dhcp3 - Properly Configure Static Wired Connection?
Jun 15, 2010v10.4 {I have completely re-edited this thread because I have started over fresh. I am no longer using bind9, but now using the installation-defaults nameserver and dhcp and trying to get a handle on how things ought to be setup properly. My previous attempts was a disaster.}
Coming fresh out of a newly installed 10.4, I obviously was able to get network connectivity but then I ran into trouble the minute that I tried to change eth0/eth1 connections via network-manager's applet. What I found was, that when I attempted to define static connections, all bets were off. It seems that once one attempts to change eth0/eth1 which are wired devices, I was no longer able to recover my network connectivity!
I was however able to setup a wireless connection, so in this way I was able to get back network (and Internet) connectivity, and write this thread on this forum. I notice also, that there is no longer 'Networks' in the System->Administration menus! Geez, what the hell is going on? how to properly configure my static wired connection? Networks in 10.4 have really changed alot!
Debian :: Configure Static Ip For Removable Hard Drive Install For Use On Multiple Machines?
Sep 13, 2010ok I am using Debian 4 bigmem and I set up static ip for my box. This is for a class and we will be moving the hard drives around the lab to different computers. My question is what do I configure to get Debian to be ok with my using different nics at different times.
My first time I used it, I had eth0, but now I'm on a different computer (same type of hardware on all systems) but my nic is now eth1... And I had to set up static again for that nic. How can I have it just maintain a static ip for whatever nic/mac address on the computer that my hard drive happens to be put on?
Networking :: Configure Static Ip For Removable Hard Drive Install For Use On Multiple Machines?
Sep 13, 2010I am using Debian 4 bigmem and I set up static ip for my box. This is for a class and we will be moving the hard drives around the lab to different computers. My question is what do I configure to get Debian to be ok with my using different nics at different times. My first time I used it, I had eth0, but now I'm on a different computer (same type of hardware on all systems) but my nic is now eth1... And I had to set up static again for that nic. How can I have it just maintain a static ip for whatever nic/mac address on the computer that my hard drive happens to be put on?
View 5 Replies View RelatedNetworking :: Configure PC For Wired/static And Wired/DHCP Networks ?
Oct 27, 2010I want my netbook to connect automatically to both the office wired/static network and to the usual wired/DHCP networks.
wicd is wicked but netsearching hasn't revealed how to configure it for both wired/static and wired/DHCP except by manually switching profiles.
wicd's profiles can use pre/post(dis)connect scripts but I don't know how to integrate them into wicd when they are upping/downing connections on cable (un)plugging.
If it is not practical to solve this within wicd, I'll explore standalone scripts to configure eth0 on cable (un)plugging, as detected by ifplugd.
Programming :: Java Non-static Variable Cannot Be Referenced From A Static Context
Feb 12, 2010I'm having some problems on the line with ***. This is from a OpenEntidade.java class file and I'm trying to update EmprestadorView's variables.
EmprestadorView.java
public class EmprestadorView extends FrameView {
...
OpenEntidade.java
-----------------
public class OpenEntidade extends javax.swing.JFrame {
[code]....
Networking :: Static IP Address That Has A Reverse Lookup To "myipaddress.static.lyse.net" And Not Email Domain?
Apr 26, 2010I got this message on Friday from just one domain. uote:mailsrv.forthnet.gr #<mailsrv.forthnet.gr #5.5.0 smtp; 554 5.5.0 Your message was considered to be spam by the FORTHnet Antispamming Policy and was not delivered to the recipient. The following spam tests returned positive for this message:FORGED_RCVD_HELO,RCVD_IN_BRBL. For further information visitWe are not a spamming community but it seems we have a statice IP address that has a Reverse lookup to "myipaddress.static.lyse.net" and not my email domain. Would setting a cname mail.mydomain.no -> myipaddress.static.lyse.net cure this problem or are there more tricks to be performedOnce I have cured the FORGED_RCVD_HELO I can move to getting the IP removed from BARACUDA.
View 2 Replies View RelatedUbuntu :: Bash: ./configure: No Such File Or Directory When Run The Command ./configure --prefix=/usr
Apr 4, 2010I am trying to follow this tutorial below so that I can get Text to the right of icons on the GNOME desktop. [URL] Everything so far has worked fine, except when I get to step 3 where I compile Nautilus. When I try to run the command ./configure --prefix=/usr It tells me bash: ./configure: No such file or directory
View 5 Replies View RelatedUbuntu Installation :: Configure Autoclicker In The Terminal - "bash: ./configure: No Such File Or Directory?
Mar 19, 2011I found a tool made for Ubuntu called Xautoclick. I downloaded it and it is called "xautoclick-0.30.tar.gz" The installation notes say "tallatBe sure you have the proper development packages for your distribution installed (i.e. something like xserver-xorg-dev, gtk2-dev, et cetera). After that, run:
./configure make sudo make install" I have no clue what to do... I typed in "./configure" in the terminal and it says "bash: ./configure: No such file or directory?
Programming :: Add A Static Library To Own Static Library?
Mar 31, 2010To create a static library, or to add additional objectiles to an existing static library, I can use a command like this:ar rcs my_library.a file1.o file2.oBut how to add an existing static library to my own static library. I have created my own static library using the command above and want to link against the library libuuid.a (placed in /usr/lib/).
View 6 Replies View RelatedOpenSUSE :: Configure / Syncing The Conduits Through The "Configure Kpilot" Menu Item
Feb 8, 2010kpilot worked just fine with my Palm Tungsten T3 on OpenSuse 10.3. I recently upgraded to 11.2 and have had numerous problems. It took me a while to get the hardware talking (documented in another thread), but now the sync is proving to be problematic. A hotsync happens - and I can also sync fully with jpilot, but the sync isn't going anywhere. I'm hoping to sync with kontact, but it's impossible to tell as kpilot hangs whenever I try to configure the conduits through the "Configure kpilot" menu item. When syncing, the log complains of missing conduits:
Version: KPilot 5.3.0 (KDE 4.3.0)
Version: pilot-link 0.12.3
Version: KDE 4.3.1 (KDE 4.3.1) "release 6"
Version: Qt 4.5.3
[Code]....
General :: Installing Hudson In Centos 5 - Manage Hudson By Using Configure System And Configure Options?
Aug 9, 2011I have tried to install and configure Hudson in centos distro version 5.Installed hudson with tomcat by deploying .war files.after configuration was completed, builded a project.It displayed build was completed successfully.but I was not able to download output of build.
So I rechecked configuration,found that i havent set artifact file pattern to archive. how to set artifact file pattern and how to get build output. how to manage hudson by using configure system and configure options.what is the correct way to configure public hudson?.
Ubuntu Networking :: Can't Keep Static Ip In 10.04
Apr 9, 2010I have a dell inspirion 6400/1505 laptop running ubuntu 10.04 has 2 network controllers wired and wireless the wired is a Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) the wireless is a Intel Corporation PRO/Wireless 3945ABG I have the wired configured for static ip 192.168.0.105 the wireless through network manager configured static ip 192.168.0.101 static works great,reboot and all is lost for the wireless default back to DHCP (wired stays static) and i loose the nameserver and have to reconfigure it all over. is there away to remove network manager an manually edit the wireless settings? i know how to edit the wired network interfaces do i just add wlan0 as a static ip ?
View 3 Replies View RelatedUbuntu :: Static IP Address Cannot Be Set?
Apr 20, 2010I have been fiddling around with my ip address configuration using several sources, and this is what I have in the /etc/network/interfaces file:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.1.122
broadcast 255.255.255.255
netmask 255.255.255.0
network 192.168.1.0
gateway 192.168.1.254
Yet, this is what I have in the ifconfig after I restarted the computer:
[Code].....
Could there be any mistakes I have made in the file? Why is it that I seem to have set a static ip address here and is not working?
Ubuntu :: No Internet With Static IP
Jun 17, 2010I wanted to give my computer a Static IP so that I can easily connect to it from other computers: ie Mythbuntu.This is what I did. I set it with a static to 192.168.1.107. My gateway is set to 192.168.1.1, and 255.255.255.0 for the subnet mask. I'm using default settings on a Linksys wireless router.I've rebooted several times.Nowthen, I can connect to the computer from my laptop via the IP.Even my Iphone can connect to the computer through that IP, so I've successfully set it's IP to static, but I cannot connect to the internet.
View 9 Replies View RelatedUbuntu :: Static Ip - Can't Resolve Dns
Sep 23, 2010I am trying to set a static ip in Ubuntu 10.04 so I can use NX client on my Vista box.
auto eth1
iface eth1 inet static
address 192.168.0.100
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255
gateway 192.168.0.1
However, when I try to use the Internet I can't get out. That seems like a dns issue to me, when I ping google from a terminal I get: unknown host [URL]
Ubuntu Networking :: 10.04 - How To Get Static IP
Jun 15, 2011I'm using an Ubuntu server 10.04 that I set up on an external 2TB USB harddrive. I'm trying to get a static ip on it because I don't have to keep physically going to the computer to find the IP address so I can SSH and configure apache, mediawiki, and all the other cool stuff Ubuntu can do. I can't (aka really don't want to) use an Ethernet b/c its kinda far, but I don't think thats the problem - wifi vs. ethernet. It's connected to a laptop, so it has wifi built-in. I set up some static IP stuff in /etc/network/interfaces as posted here:
Code:
# This file describes the network interfaces available on your system and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# eth1 with dhcp
auto eth1
iface eth1 inet dhcp
# eth1 with static IP
# auto eth1
# iface eth1 inet static
# address 192.168.2.106
# netmask 255.255.255.0
# network 192.168.2.0
# broadcast 192.168.2.255
# gateway 192.168.2.200
# wlan0 base (don't comment out the line below)
auto wlan0
# wlan0 with DHCP
#iface wlan0 inet dhcp
# wlan0 with static IP
iface wlan0 inet static
address 192.168.2.101
netmask 255.255.0.0
network 192.168.2.0
broadcast 192.168.2.255
gateway 192.168.2.200
wireless-essid *removed*
wireless-key *removed*
wireless-mode managed
Where "*removed*" means that I have taken the text out of this post for security. At the top, I WAS going to do static ethernet, but I decided I wasn't really going to use and and set it back to DHCP (that what the commented part is). My laptop (and all other computers, actually) are on DHCP and for some reason switch between 192.168.2.* and 192.168.1.* because some configuration is messed up in my router (I can't fix it; no permissions). I have a samba and apache server on the server and want full-time access to it without ssh-ing and changing the ip to the 192.168.1 or 192.168.2 networks every time my laptop switches networks, respectively. I can't access the server with my laptop when they're on different "networks".
Ubuntu :: Can't Set Static Route?
Apr 21, 2010Using Ubuntu 9.1, I get the error "SIOCADDRT: No such process" whenever I try to set a static route using
sudo route add -net dest netmask 255.255.255.0 gw gateway
and
sudo ip route add dest/24 via gateway dev eth0
gives me "RTNETLINK answers: No such process".
From googling, it looks like others have had this problem, but I haven't found any working solutions yet. Anyone have any idea how to fix this?Ok, finally found the issue. The gateway has to be on the same subnet... ugh, is there anyway to use a gateway on a different subnet without tunnels? I can ping the machine I want to be the gateway, so I feel like I should be allowed to set it as a next hop for specific addresses.
Ubuntu Servers :: Keeps Overriding Static IP ?
Jan 27, 2010My ISP offers me a static IP and 2 dynamic IPs. I want to use the static one.
When I run
Code:
But the next morning (not every morning though) my IP will be the dynamic one again. Something seems to be overriding it. The last time it changed was today at around 8:30 AM.
Ubuntu Networking :: Set Up A Server With Static Ip?
Feb 15, 2010I'm trying to set my computer up as a server. I've installed LAMP, but now my problem is getting a static ip. I've tried several tutorials, but with each one, I seem to somehow disable my internet connection.
I'm almost positive that this is all over my head, but my aim is for it to not be.
Ubuntu :: Setting Up Static IP In Server?
Mar 21, 2010Well basically the title how to setup a static IP in Ubuntu Server?
View 3 Replies View RelatedUbuntu :: 9.10~pc Is Making Static Noises?
Apr 4, 2010yeah first time ever being on ubuntu os. i got 3 going on one pc but only one partition is making static noises coming the speakers and its kinda loud. any ideas why?? its only happening to one partition so im clueless to whats going here...to be more descriptive its like a constant sssshhhhhhhhhhhhhhhhh or same as a radio being off frequency
View 6 Replies View RelatedUbuntu :: Assign A Static Ip Address?
Jun 13, 2010I want to assign a static ip address, my network/interfaces files shows
Code:
auto lo
iface lo inet loopback
am I correct to add
Code:
iface eth0 inet static
address 10.42.43.10
netmask 255.255.252.0
gateway 10.42.43.1
or is there more I need?
