For some reason, when I use "./configure" to set up tarballs (.tar or .tar.gz), it gives me this error:
Code:
*** Could not run GTK+ test program, checking why...
*** The test program failed to compile or link. See the file config.log for the
*** exact error that occured. This usually means GTK+ is incorrectly installed.
configure: error: Cannot find GTK2
[Code].....
I am quite new to Linux. Just some basic information, I am using windows xp but have installed vmwork station and am running Red Hat enterprise linux 4.
When i run ./configure it gives me this error. "configure: error: libnet >=1.1.2.1 not found "
If I use any Synaptic function or apt-get install I receive the following message;
E: grub-pc: subprocess installed post-installation script returned error exit status 10
I have tried to reinstall but still have the error. I'm running;
Home built
MSI K9N6PGM 2V mainboard
AMD Phenom Black Triple core
2 gig RAM
Ubuntu 10.04
I'm using ubuntu 10.04 beta 1. when I try to update & upgrade I get the following error:
Code:
Setting up install-info (4.13a.dfsg.1-5ubuntu1) .../etc/environment: line 4: LC-ALL=en_US.UTF-8: command not found dpkg: error processing install-info (--configure): subprocess installed post-installation script returned error exit status 127 Errors were encountered while processing: install-info
I switched from opensuse yesterday and i'm trying to configure the personal pc. In opensuse was pretty easy because i only needed to use the yast.Now: I've got 403 error
PHP Code:[code].....
I killed a stalled apt-get safe-upgrade, which left lock-files on my system. I followed this guide to clean it up:
http://ubuntuforums.org/showthread.p...highlight=lock
and have done the following:
sudo rm /var/lib/dpkg/lock
sudo rm -r /tmp/*
now, when I try:
sudo dpkg --configure -a
i get: dpkg: parse error, in file '/var/lib/dpkg/updates/0006' near line 0: newline in field name `#padding'
the file var/lib/dpkg/updates/0006 contains nothing but lines of '#padding'
System: Freshly installed 10.04 64bit, 2.6.32-21-generic
How to fix this error :
Code:
checking for Qt4... no
configure: error: The QtCore library >= 4.3.0 could not be found.
I am trying to install gcc 4.2.4 I specifcially need C++ 4.2.4 and gfortran 4.2.4. I successfully installed gcc 4.4.1 through yast. However, the software I am trying to compile will not compile with 4.4.1. After contacting the software support, they inform me that it will only compile with 4.2.4. So, I searched yast with no luck. I have found a .tar.bz2 on the internet. I attempted to configure and then build. I get the following error after running the make command.
configure: error: cannot find neither zip nor jar, cannot continue
I have downloaded yersinia-0.7.1 and trying to install it. When i run ./configure it gives me following error
,more than one set found in:
/usr/include
/usr/include/pcap
now i have installed libqt3-mt-dev this error is solve but new error is comming this is followingly i didn't understand------------->checking for KDE... configure: error:in the prefix, you've chosen, are no KDE headers installed. This will fail.So, check this please and use another prefix!
View 8 Replies View RelatedI have mandriva 2007 install on my desktop. I tried to update to grub2. When I run the ./configure I got the following error message.
This script, last modified 2009-06-10, has failed to recognize the operating system you are using. It is advised that you download the most up to date version of the config scripts from [url]and [url]
If the version you run (./config.guess) is already up to date, please send the following data and any information you think might be pertinent to <config-patches@gnu.org> in order to provide the needed information to handle your system.
I'm using Ubuntu 9.10 'Karmic Koala' and when trying to install from source any program using C++, in this example kpictorial, I get this:
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
[Code].....
I have qt3, qt4, the -dev packages and the headers and libraries installed. I have just about everything you can have for qt installed trying to fix this. The qt files are under /usr/include and the source code files are under /usr/src.
I am using Fedora 10 kernel 2.6.29.1-36.fc10.i686
I have installed the following packages
When I try to configure alsa, I got the following error:
Give me error when I install softflowd
the problem :
#./configure
give me :
configure error : no BPF header not found
When I am compiling from the src, I run the ./configure script. While there might be error sometimes, I 'd like to ask, what're the 3 stars( ***) in front of the msg stand for? Do they stand for critical errors?
View 9 Replies View RelatedI'm trying to install Wireshark but I have this message :
"configure: error: Header file pcap.h not found; if you installed libpcap from source, did you also do "make install-incl", and if you installed a binary package of libpcap, is there also a developer's package of libpcap and did you also install that package?"
I tried to use #yum -y install wireshark but didn't work.
i am trying to configure below commands and it through error some one can advise where to check and how to fix this issue
[root@2rem .vnc]# vncserver :1 -name 2rem -depth 16 -geomatry 800x600
You will require a password to access your desktops.
Password:
Verify:
xauth: creating new authority file /root/.Xauthority
Unable to start Xvnc, exiting
I am facing the following error when im trying to install the openldap and running the ./ configure command.
./configure
Configuring OpenLDAP 2.4.21-Release ...
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
[Code]...
I'm trying to install ffmpeg however I always get an error when I run ./configure. I know xvid is compelled into the dir below, this is the output from the xvid make install.
make install
D: /usr/local/lib
I: /usr/local/lib/libxvidcore.so.4.2
I: /usr/local/lib/libxvidcore.a
D: /usr/local/include
I: /usr/local/include/xvid.h
Then from the ffmpeg directory I run
./configure --prefix=/usr --libdir=/usr/local --enable-libmp3lame --enable-libxvid --enable-gpl --enable-shared
ERROR: libxvid not found
checking whether time.h and sys/time.h may both be included... yes
checking for long double... yes
checking for hrtime_t... no
checking size of int... 0
checking size of unsigned int... 0
[code]....
configure: error: readline library not found If you have readline already installed, see config.log for details on the failure. It is possible the compiler isn't looking in the proper directory. Use --without-readline to disable readline support. Now I tried to yum install readline-devel and the result was failure as below:
Quote:
[root@localhost ~]# yum install readline-devel-6.0-3.fc12.i686.rpm
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
[code]....
So I am thinking that maybe I have to tell configure where my readline libraries are. From the above, it looks like readline-6.0 is not on my computer, even though I went through the configure/build/install process for it.
I have had problems trying to use ./configure when compiling fvwm95. I get a error that says this
Code:
checking for cc... no
configure: error: no acceptable cc found in $PATH
How can I configure apache2 to show the error message in the browser? Just for the purposes of debugging, I do not want to have to open the server error log every time.
View 1 Replies View RelatedI'm pretty new at working with Linux/Unix systems, just started dealing with the CLI a week or two ago at work so bear with me if my questions/problems seem obvious, they probably aren't to me. URLs are at the bottom since I can't hyperlink to them. We have a server with Red Hat Enterprise Linux Server release 5.2 (Tikanga), x86_64 GNU/Linux. For the past few days at least (not sure when it began) every five minutes we get two messages for CPU0 and CPU1 saying: "Temperature above threshold, cpu clock throttled". Occasionally it says they are normal, so they're not *always* above the threshold but a majority the time.
The server doesn't have internet, so I interact with it and transfer files via ssh/telnet/sftp from my Windows PC to another server running Fedora release 10 (Cambridge) to the RHEL5 server. I have been trying to install lm_sensors to try and read the CPU temperature and possibly the fan speed, but every installation method has failed. I have tried installing it via the yum command I read about on this page (URL 1), but since it doesn't have internet access it didn't work. I then tried manually installing using the instructions on the lm-sensors.org page (URL 2), but whenever I try to install anything (gcc, libtool,
libsysfs) it shows:
checking for gcc... no
checking for cc... no
checking for cl.exe... no
configure: error: in '/home/user/src/libtool-2.4':
configure: error: no acceptable C compiler found in $PATH
I then looked up how to install gcc, but when I found a .rpm file of gcc 4.1.2 for RHEL5 I tried installing that like it mentions here (URL 3), but there are lots of [dependancy] programs I can't find a .rpm for as it seems they are all outdated and hard to find for RHEL5. Do I need to find the installation CD in order to install gcc? And is there any other way to check the cpu temperature or to know how to disable/fix the messages about temperature being above threshold?
Anyone recompiled Empathy on Fedora? I have problem of configure and make as following:
checking for LIBEMPATHY... configure: error: Package requirements (
glib-2.0 >= 2.16.0
gobject-2.0
gio-2.0 >= 2.16.0
gio-unix-2.0 >= 2.16.0
libxml-2.0
telepathy-glib >= 0.7.31
libmissioncontrol >= 4.61
telepathy-farsight
farsight2-0.10
gstreamer-0.10
) were not met:
No package 'telepathy-glib' found
No package 'libmissioncontrol' found
No package 'telepathy-farsight' found
No package 'farsight2-0.10' found
No package 'gstreamer-0.10' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables LIBEMPATHY_CFLAGS and LIBEMPATHY_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.
this is my first post i have this error in ./configure for bind 9.7.3: checking for OpenSSL library... using OpenSSL from /usr/lib and /usr/includechecking whether linking with OpenSSL works... yeschecking whether linking with OpenSSL requires -ldl... unknown configure: error: OpenSSL has unsupported dynamic loading
View 1 Replies View RelatedI tried to install lame on Linux, but I failed running ./configure.
View 9 Replies View Relatedmysql -u root -p but unable to create any database.
if i tried to configure it's giving error ERROR 1006 (HYOOO) : can't create database 'test' (error: 2)
my location for database is /var/lib/mysql and permissions are
drwxrwxrwx mysql root.....
I'm trying to compile a program on Cygwin and it seems like as soon as I solve one problem, another pops up. This time, trying to run configure gets me an error message.
The relevant part of my config.log is included below:
I installed Cygwin with everything that was in the Devel folder, just to be on the safe side.
I am not all that experienced with Linux configure scripts for building source. I downloaded a vmime library source package. One of the dependencies it has is on another open source lib - gsasl. I had no trouble building the gsasl lib.
But I cannot figure out how to let the vmime configure script know that I have built the gsasl package. Here is the end of the output of the vmime configure script:
checking for char... yes
checking size of char... 1
checking for short... yes
checking size of short... 2
checking for int... yes
checking size of int... 4
[Code]...