Debian Installation :: Must Have At Least One Backend To Build Pango

Aug 13, 2014

I am trying to install gnome-mplayer to see if I update it, for he not catching more when I play the videos, and it is asking me to have at least one "backend "to compile Pango. I do not understand this output. Have you tried installing the source Cairo.ttf but solves nothing. Cairo is installed as described but do not understand this output.

weiller@debian:~/Downloads/pango-1.36.5$ ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk

[code]...

View 0 Replies


ADVERTISEMENT

Red Hat / Fedora :: PNG Backend Error While Installing Cairo-1.6.0 - Requested PNG Backend Could Not Be Enabled

Nov 29, 2010

I want to install GTK+. I see there are also numerous dependencies, which i've been slowly tackling, and the Cairo package has been particularly difficult. It claims the following upon ./configure --prefix=/usr configure: WARNING: Could not find libpng in the pkg-config search path checking whether cairo's PNG backend could be enabled... no configure: error: requested PNG backend could not be enabled I've done some searching and found that libpng.pc is in my /usr/lib/pkgconfig/ directory and that the following commands don't do the trick:

PKG_CONFIG_PATH=/usr/lib/pkgconfig
export PKG_CONFIG_PATH

View 1 Replies View Related

General :: Error:backend-not-running Backend Not Running As Expected (yumex Will Close)

Mar 9, 2010

i installed yumex:yum -y install yumex, when i start yumex it came with this error:fatal error:backend-not-running backend not running as expected (yumex will close) how can i solve it?

View 10 Replies View Related

Debian :: Install Not Supported By Backend

Aug 14, 2015

I am new to Debian Wheezy and I can't install anything. Ever time I try to install a .deb file I get the message saying that installation is not supported by backend. Also I'm unable to install from the terminal; it always says something like "path not found" or "file doesn't exist" (I'm on my phone so I don't have an exact error detail). Everything I've read tells me to install something to fix the problem but I can't install them due to the same error.

View 14 Replies View Related

Debian Installation :: Can't Build Live Usb-hdd With Libmotif4 / Get That?

Mar 1, 2011

I have squeeze and try to build live usb-hdd with libmotif4# $LB_PACKAGES: set packages to install code...

View 7 Replies View Related

General :: Required In Installing Anjuta & Pango In CYGWIN?

Oct 13, 2010

I am very new to Linux. I want to work on GTK. As I came from VB background, I want to use Anjuta IDE to start my design. I installed CYGWIN. When I am trying to install anjuta , I am getting error saying GLIB and Unique1.0 not found :

[Code]...

View 3 Replies View Related

Debian Hardware :: IPad Syncing - Operation Not Supported By Backend

Feb 7, 2014

Using gthumb, I am unable to get pictures off my iPad. It saysCould not perform the operation

Operation not supported by backend

View 3 Replies View Related

Debian Installation :: Weekly Build Successful Install But GNOME Freezes Often

Aug 18, 2010

I installed Debian Squeeze-testing weekly build today, with CD1 alone. It took 1 Hour 38 minutes to install and configure on my Pentium 4 2.7 Ghz , 1GB ram HP machine. I have some trouble with the installation. Sometimes the desktop just freezes while moving Icons, or opening Xterm. I cannot use Ctrl-Alt-Backspace, OR Ctrl-Alt-Delete keys. I have to physically reboot. Why doesn't Ctrl-Alt-Backspace work on GNOME? Is there a IRC chat for Debian Help and what applications does one use on GNOME for IRC chat?

View 5 Replies View Related

Ubuntu Installation :: Cannot Get The Exclusive Lock On The Packaging Backend

Jan 15, 2010

" p, li { white-space: pre-wrap; }Cannot get the exclusive lock on the packaging backend. Please close any other legacy packaging tools that may be open." I cannot update anything, and I haven't opened another package downloader. The only one open is KpackageKit. Please help, is this a big or have a I got a virus or something? I don't know what information is needed so if I need to expand tell me what I need to retrieve and ill post it.I'm not good with Kubuntu problems.

View 2 Replies View Related

Debian :: Upgrade Failure - Message - Failed In Write On Buffer Copy For Backend Dpkg-deb

Jul 16, 2011

When I try to upgrade, I always get this message: "E: /var/cache/apt/archives/linux-image-2.6.32-5-amd64_2.6.32-35_i386.deb: failed in write on buffer copy for backend dpkg-deb during `./lib/modules/2.6.32-5-amd64/kernel/drivers/net/s2io.ko'"

View 14 Replies View Related

Fedora Installation :: Error Updating Evolution Backend Data Server

Jun 26, 2010

I got this error during updating backend data server for evolution. "could not do simulate: gnome-panel-2.30.0-1.fc13.i686 requires libedataserver-1.2.so.11 : Success - empty transaction"

View 2 Replies View Related

Debian Configuration :: Build A Package - Debian / Rules Error?

Apr 2, 2011

I recently tossed Ubuntu for Debian Unstable for my personal machines and I'm having trouble building Emerald into a package. I've already configured and installed the package (using the usual ./configure, make, make install) but I wanted to make a deb for future use (for myself and for others). However every time I try to run dpkg-build I get the following error message.

dh_install -pemerald --sourcedir=debian/tmp
dh_install: emerald missing files (usr/bin/*), aborting
make: *** [binary-install/emerald] Error 2
dpkg-buildpackage: error: debian/rules binary gave error exit status 2

[Code]...

View 2 Replies View Related

Ubuntu :: By Default Pango Is Choosing AR PL UMing CN As Font To Render Japanese Text When Current Font Doesn't Have Japanese Glyphs

May 4, 2010

Actually I want to log a bug but I don't really know what package to log it against. The problem is that by default Pango is choosing the AR PL UMing CN as the font to render Japanese text when the current font doesn't have Japanese glyphs. But AR PL UMing CN is a Chinese font, so Chinese glyphs for kanji characters (e.g., 覚) are displayed. This is jarring and confusing for Japanese readers.

This situation mostly arises when you have mixed English and Japanese text. Some applications (for instance Firefox) will allow you to select a font for Asian text. Thus if the text contains only Asian characters it will use the font you select, rather than what Pango would have selected. But if it is a mix of English and Japanese, you end up with the wrong glyphs.

Other environments (like gnome-terminal, or a gedit) have difficulties as well. Since the primary interface requires mono spaced roman characters you run into difficulty selecting fonts. Most Japanese fonts only have proportional roman characters. This means that if use a nice roman font and use Japanese text (for instance file names), you end up with Chinese glyphs. What I want is a mechanism that will work across all of Gnome for selecting the font I want to use for Chinese characters. That way I can choose either Japanese or Chinese glyphs.

I realize this is low priority. It only bugs me a little, but many of my Japanese colleagues are put off from using Ubuntu because they are confused by the Chinese glyphs that pop up on my screen from time to time. As I said, I'd like to file a bug, but I'm not sure against what package...

View 2 Replies View Related

OpenSUSE :: Find All The Build-deps Or What They Are For That Matter To Build Boxee

Feb 20, 2010

I'm in love with my Opensuse 11.2. Love my KDE 4.4. The only thing I miss from my Ubuntu installation, is the ability to use Boxee. I would be more than willing to compile Boxee from source. I only have 2 problems with that:

1) I don't know where I can find all the build-deps or what they are for that matter to build Boxee.

2) I'm running on a Netbook. Yes, my measly Intel Atom is no fun for compiling and building.

What are my options/what can I do to get Boxee up and running on 11.2? I've tried searching on build service for an RPM, but I think due to legal restrictions, Boxee can't be on there.

View 9 Replies View Related

OpenSUSE :: Build Libevent-dev 2.0.10 In Ooder To Build New Version Of Transmission?

Feb 16, 2011

looking for LIBEVENT... configure: error: Package requirements (libevent >= 2.0.10) were not met: In order to build transmission 2.21.I need libeventnew version of transmission,I need to build libevent-dev >= 2.0.10 and installed first.But I can't get any information about building development files for libevent.

View 1 Replies View Related

Software :: Self Build Rpm Fails With Missing Dependencies On Build Host?

Sep 24, 2009

as I'm advancing in building some nice rpm I finally wanted to install on of my gems also the build was successful the actual install fails with missing dependencies.

Code:

$ rpm --root /home/sascha/rpmbuild/ -i ./RPMS/x86_64/memcached-1.4.1-2.x86_64.rpm
error: Failed dependencies:
libc.so.6()(64bit) is needed by memcached-1.4.1-2.x86_64
libc.so.6(GLIBC_2.2.5)(64bit) is needed by memcached-1.4.1-2.x86_64

[code]....

View 1 Replies View Related

Debian :: Custom Build Of PHP?

Nov 16, 2010

I followed The Perfect Server - Debian Lenny on howtoforge website. (Just changed some instructions to fit Sqeeze) * I did not install Control Panel, just software like LAMPP & Mail Servers - SMTP(SSL+AUTH) + POP(SSL) + IMAP(SSL).When I installed PHP it installed it with Suhosin Patch, but that patch was giving me a headache with some web scripts that I write for myself. So I decided to compile it for myself. Here is how I done it:

apt-get install build-essential
apt-get build-dep php5 (It installed about hundred packages)
apt-get source php5

[code]....

View 6 Replies View Related

Ubuntu Security :: Script Running As A Special Build User Which Performs An Automated Build That Fails With (Too Many Open Files)?

Feb 11, 2011

I have an init script running as a special build user which performs an automated build that fails with (Too many open files).I updated /etc/security/limits to allow the special user more open files, but that didn't work - the init script still isn't allowed more open files.Here's a demonstration of the problem;

Code:
$ su - sbsbuild -c "ulimit -n"
Password:

[code]....

View 1 Replies View Related

Slackware :: Install The I386 Build On One Partition And The 64-bit Build On Another

Sep 16, 2010

Trying to install SW 13.1 (on DVD) on the following system: M/B Intel: DX38BT Processor Intel Core 2 Quad Q6700 - 2.66GHz, 8MB Cache, 1066MHz FSB, Socket 775 Memory Corsair Dual Channel 8192MB PC10600 DDR3 1333MHz Memory (4x2048MB) Graphics Diamond Radeon HD 3850 Video Card - Viper, 512MB GDDR3, PCI Express 2.0 P/S Ultra 1000W

My goal is to install the i386 build on one partition and the 64-bit build on another. I have been away from Linux for a while and am sick to death of Win7, want to come home. :-}

Booted on i386 side of DVD, system freezes after a couple of lines that start with ATA2. Does not respond to 3 finger salute, ctrl-c, nothing. Have to press reset. I have tried both huge.s and hugesmp.s kernels

Booted on 64-bit side, comes up fine. I performed the install, selected for automatic lilo install. Lilo install hung but I was able to reboot. I booted off the 64-bit side again, entered the following: huge.s root=/dev/sde3 rdinit= ro It booted fully to the login prompt but the keyboard does not work, no input.

View 2 Replies View Related

Debian :: [PPC] Build Iceweasel 5.0 From Source

Jul 21, 2011

I run Debian Squeeze on the powerpc architecture and I'd like to install the newest Iceweasel on it. The Debain Mozilla repo only has binary packages for i386 and amd64 but provides sources.

So I did: apt-get source iceweasel

which resulted in the creation of these files/directories:

iceweasel-5.0/
iceweasel_5.0-3~bpo60+1.debian.tar.gz
iceweasel_5.0-3~bpo60+1.dsc
iceweasel_5.0.orig.tar.bz2

[Code]....

View 5 Replies View Related

Debian :: Remove A New Kernel Build?

Sep 9, 2010

the correct way to remove custom kernels? I was trying to install a driver and only got it half way right and I want to wipe the slate clean and try again.Here's the original:Debian GNU/Linux, kernel 2.6.26-2-amd64root(hd0,4)kernel/boot/vmlinuz-2.6.26-2-amd64 root=UUID=64dcc531-f5b0-47e8-99c4-abeecfab9353 ro quietinitrd/boot/initrd.img-2.6.26-2-amd64

View 2 Replies View Related

Debian :: Using Dpkg-buildpackage To Build Qt?

Oct 12, 2010

I'm trying to build Qt using dpkg-buildpackage. Briefly, the problem I have consists in that using dpkg-buildpackage I get a linking error, that I don't get if I run configure and make directly, without the mediation of dpkg-buildpackage. One of the issues that we have is that, using dpkg-buildpackage, the configure command is not capable of finding the .qmake.cache file, so, the environment variables set in the configure script and saved in that file are not read, which causes that the apropiate linking parameters are not used. I guess that the problem is caused by a difference in the environment of execution of the configure command. I don't know in which way the dpkg-buildpackage is changing the environment so that it makes fail the building process.

I run 'make deb-x11' to start building process using dpkg-buildpackage: This is the main Makefile:

X11_DEB = gvr-qt-x11-lgpl_$(X11_VERSION)_i386.deb
...
BUILDPACKAGE_ARGS = -b
BUILDPACKAGE_ARGS += -rfakeroot
BUILDPACKAGE_ARGS += -uc

[Code].....

View 2 Replies View Related

Debian Programming :: Can't Build Android App

May 29, 2014

I'm trying to setup tools for developing android apps on my Debian Wheezy (backport) system. Eclipse with android plugins is installed. Android SDK installed using android-sdk_r22.6.2-linux.tgz available from URL...My problem is I can't build the android app. The console in Eclipse tells me something (translated) like this;

Code: Select all[2014-05-30 16:36:45 - adb] Unexpected exception 'Cannot run program "/usr/lib/android-sdk-linux/platform-tools/adb": java.io.IOException: error=2, No such file or directory' while attempting to get adb version from '/usr/lib/android-sdk-linux/platform-tools/adb'

I have searched the web quite extensively but found no solution. It seems the issue may be due to I'm having a 64bit system but building the app requires some 32bit stuff.Some older posts suggest adding package by "apt-get install ia32-libs". In later posts (i.e. URL....

Code: Select alldpkg --add-architecture i386
apt-get update
apt-get install libc6:i386 libncurses5:i386 libstdc++6:i386

However doing apt-get install libc6:i386 asks me to remove 1536 installed packages and installing just 5 new...

Some info about my system ....
Code: Select all>uname -mrv
3.14-0.bpo.1-amd64 #1 SMP Debian 3.14.4-1~bpo70+1 (2014-05-14) x86_64

View 8 Replies View Related

Debian :: Apt-get Build-dep Cannot Find Dependencies?

Jan 18, 2010

So I am trying to build a package from source in scratch box (for a debian based ARM distro) and I ran apt-get build-dep <package name> and it spits back the general E: Build-dependencies could not be satisfied. - is there an extra flag I could add the the apt-get command so it would show me which packages it cannot find so I can hunt them down by hand?

View 4 Replies View Related

Ubuntu Installation :: Build-essential Installation In Secluded Environment

Sep 1, 2011

I have been trying to install build-essential package on Ubuntu-11.x in the production environment, which is not connected through Internet. When I run apt-get install command, it gives me errors such as:

Depends: libc6-dev but it is not installable
Depends: gcc but it is not installable and so on

I have checked these packages through "dpkg get-selections" command and i believe that they are already installed (probably virtual packages) in the system. Please let me know the quick way to complete this installation.

View 1 Replies View Related

OpenSUSE :: Ant Build.xml Does Not Exist - Build Failed

Apr 19, 2011

Ant was installed in yast2 but will not run since build.xml was never created. How can this be fixed? I would like to run AudioTool.

View 5 Replies View Related

Debian :: Build Customized Version Of The LMDE2

Jul 27, 2015

I'm currently trying to make my version of the LMDE 2 (based on Debian), but unfortunately, a lot of HOW-TO on this topic, is based on the remastersys, and the main site (and repository) is not available any more. The only one I could find is ubuntu build and they won't work on LMDE because it's Debian based. I also have tried tools like "systemback" - made a 4GB iso image file, and had few options to customize, and "bootcd" package, who had even less options (received a 2GB iso).

So, what I want:

Base system: LMDE 2 + official updates + some new software (like pinta, openshot, deluge etc.) + some removed software + fresh kernel -> compress it all and make an iso image file with option to load in LiveCD/USB mode and also install on HDD. I have made all the chain except "last iso part".

View 14 Replies View Related

Debian :: How To Avoid Unwanted Dependency During .deb Build

Aug 14, 2011

I have successfully build .deb im my box and it is running well. But during the debuild process I got followingdpkg-shlibdeps: warning: dependency on libatk-1.0.so.0 could be avoided if "debian/retrovol/usr/bin/retrovol" were not uselessly linked against it (they use none of its symbols).

dpkg-shlibdeps: warning: dependency on libdl.so.2 could be avoided if "debian/retrovol/usr/bin/retrovol" were

[code]....

View 1 Replies View Related

Debian :: High End (But Not Bleeding Edge) Build?

Sep 10, 2011

Some searches seemed to indicate that it's been awhile since there's been a build thread, so I thought I'd start one. I'm looking to replace a six-year old machine (Athlon XP 3200+ processor (introduced in 2003), integrated graphics with no dedicated graphics card). I'm rocking Windows XP Home Edition (32 bit).

I'm not a "computer hobbyist," far from it. I use my machine mainly for browsing, word processing, and business (QuickBooks and Turbo Tax). It is a tool. I don't really enjoy fiddling around with computers. My current machine is now barely able to support a good research session on the 'Net anymore, the little processor seemingly gagging on the heavy flash content you see everywhere nowadays, the 2GB (the most she'll take) of RAM easily filled.

I'm planning some rough travel international motorcycle trips (see my motorcycle build thread here (don't worry about registering on this motorcycle forum.....they are good folks and I've never gotten any spam from them) and purchased, a while back, an Asus eee PC 901 with the OEM Xandros (a bastardized offshoot of Etch) loaded to use with those trips. From learning that OS, I saw for myself the benefits of Linux (vs. Windows). Of all the distros, Debian is the most attractive to me (even though I'm currently rocking Puppeee (new version) on the 901.....it makes that little machine zoooooom!) as I really like the package management system, the logic, and the stability. I also like the feeling of personal responsibility that comes with Debian.

So, back to the build. I'm currently planning on it being a pure Debian machine. I'm ready to move on from Windows, for reasons I don't have to explain here. I stated that I don't particularly care to "play" with computers, but I'm willing to put in some front end labor in order to enjoy a long-term, low-maintenance relationship with my new machine. With that philosophy in mind, I'm looking to build a machine that will serve my simple needs for ten years(!) So, since the costs will be spread out so far, I'm ready to drop some serious (for me) coin on this project in order to avoid having to go through what is, for me, a rather painful process of research again any time soon.

View 13 Replies View Related

Debian :: Backporting Build Process Error

Sep 12, 2015

I'm trying to build a backport of the package redshift [URL] ...., from stretch to jessie.

I followed these instructions [URL] .... and ended up with an error at the last step (dpkg-buildpackage).

What I did:

Code: Select allsudo apt-get install packaging-dev debian-keyring devscripts equivs
rmadison redshift --architecture i386
dget -x http://http.debian.net/debian/pool/main/r/redshift/redshift_1.10-5.dsc
cd redshift-1.10
sudo mk-build-deps --install --remove
dch --local ~bpo70+ --distribution jessie-backports "Rebuild for jessie-backports."
fakeroot debian/rules binary

[Code] ....

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved