Ubuntu :: Way To Erase Hard Drive
Jun 18, 2011
I got 8.10 to load and run on my set up, got disc burned ready for fresh install but won't boot from disc? erasing the drive is no issue so no problem there, i at least have a taste for this now and are liking it.is there a way to erase the hard drive, to get the disc to boot so i can install a supported version? i have kubuntu 11.04 ready to go.from playing on this kde version am really impressed and like this.smokes windows all to pieces, though i like my games for window too
View 8 Replies
ADVERTISEMENT
Dec 19, 2010
I bought a new 2.5 inch SATA laptop hard drive and mounted it in an external enclosure for use as an external backup drive. I had a whale of a time getting it formatted (ref post), but finally did by putting the bare drive into a laptop and used Ubuntu to partition and format as part of installing. Then I remounted the bare drive back into the enclosure and sure enough now I can now see the drive.
So now I want to erase the files from the backup drive. Problem is, Ubuntu won't let me delete or add any files. In Nautlis, if I select the files and "right click", Move to Trash is grayed out. If I press the delete button, nothing happens. If I try to copy a new file to the backup drive it says "permission denied". If I go into the Properties .> Permissions for the drive everything is grayed out so I can't change the permission. It also says "You are not the owner so you cannot change permissions".
View 7 Replies
View Related
Jun 22, 2011
After installation, when starting to boot, I have several choices showing:
1)Ubuntu, w/ Linux 2.6.38-8-generic pae
2)Ubuntu, w/ Linux 2.6.38-8-generic pae (Recovery Mode)
3)Memory test (memtest 86+)
4)Memory test (memtest 86+, serial console 115200
5)Windows Server 2003 For Small Business Server (on /dev/sdd1)
I used #1 and I only have a blank screen.
I used #2 and I went into recovery mode, but I keep getting the error message: "No root
file system is defined. Please correct this from the partition.
I just want to erase all of numbers 1 to 5 and start clean. what should I do?
View 8 Replies
View Related
Aug 29, 2010
I would like to completely erase my hard drive and install Ubuntu 10.04 on again fresh. I think some files have become corrupted from a power cut that I had last night whilst the laptop was plugged in (and turned on).
I'm not bothered about completely wiping the hard drive since there are no important files on it (at most there are just a lot of packages I downloaded from the repro...) I don't have any Windows installations either - it's just a simple; wipe the hard drive and reinstall all over again case
View 2 Replies
View Related
Apr 6, 2011
I had a laptop with a partition for windows and linux, but I decided to thorw away the partition for windows and add it to the linux partition. So i read this was possible with gparted, burned a cd, deleted the windows partition and resized the linux partition to the full space.
GParted did it work, but when it was nearly finished it said it failed. When I rebooted the laptop, it gave me hard disk errors of the type: DRDY ERR UNC. I couldn't solve the problem, so I wanted to clear the whole disk. I have been trying to accomplish this with the Debian boot CD, but it says it can't do that anymore. How to completely erase my hard disk?
View 2 Replies
View Related
Jan 13, 2010
I use a Kingston 1 GB USB to install a Acer one with ubuntu 9.04 and works perfect, the problem come wen i try to erase the USB. I can't erase the files or format the usb. How can I mount the unit with the RW options. The sistem say "the unid is label Read Only"
View 1 Replies
View Related
Apr 12, 2010
I have an external hard drive I use for backups. This drive has entire operating system on it(don't know which one, but I think it's intrepid), from when I did a complete backup eons ago. I have added new stuff since then. I tried to erase the system files on it, since they take up space and aren't likely from my current system. I don't run the drive all the time, only when I'm backing up files. The rest of the time, it's off. When I did this, I couldn't run any programs on my main computer( the bin directory was gone), and it wasn't in my trash on the main drive or the external drive. I tried re-installing without erasing my home directory on the main drive; it went okay, until I tried to open a file.
My /home apparently had nothing in it, so i downloaded my backup files, only to run out of room. The files were there; I just couldn't see them. I tried to open several programs, but was told I didn't have root access. Finally, I just reformatted the whole drive and re-installed everything. What I'd like to know is:1. How do I clear the junk from the external drive without hurting the main drive?
2. Why did erasing the old bin file on the external drive whack the same file on the main drive?3.Several times before, I have upgraded or re-installed xubuntu, leaving my home directory intact. The upgrade either can't find my files, or forgets half my settings. How can I keep my files and settings? I hate having to re-install everything from scratch each time I upgrade. I thought having a separate /home directory was supposed to protect all that.
View 4 Replies
View Related
Apr 21, 2010
I have 1TB drive, I need to completley erase/overwrite all data.What would be the quickest way under linux?
View 15 Replies
View Related
Jan 25, 2010
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies
View Related
Mar 16, 2010
My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
View 3 Replies
View Related
Nov 5, 2010
During the ubuntu installation I am most afraid by this question. If I select to "erase and use entire hard disk "
what will happen. For example I have 20 gb Hard disk divided in 4 logical drives 5 GB each. Whole 20 gb data will be arased, or Data on one of those 4 drives will be erased.
View 5 Replies
View Related
May 1, 2010
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
View 1 Replies
View Related
Mar 21, 2009
Sometimes when I do anything write heavy such as transferring backup or downloading large files from the net, the machine crashes almost completely.
View 8 Replies
View Related
Jun 3, 2011
I have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
View 6 Replies
View Related
Jan 14, 2009
I have 2 ubuntu's: 1 on my ineternal hard drive, 1 on my external
When I startup without my ext drive =>GRUB error 21.
And when I plug it in I can choose: the standard ubuntu kernel is the one on my external, and the original one is listed under other...
I'd like to be able to startup without external hard drive and make the ubuntu on my internal drve the standard.
View 14 Replies
View Related
Feb 2, 2011
How do I format another drive to "accept" Linux and delete/erase Windows?
View 6 Replies
View Related
Jan 17, 2011
I recently bought 320 GB Trancend external hard disk and working fine days back.Earlier i could copy from and to the hard disk with out any issue. I dont know what happened after that now i am not able to write any files in to the external hard disk. This is not NTFS formatted device. here is some of the out put from terminal.
Code:
sundar@sundar-sundar:~$ fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
[code]...
View 7 Replies
View Related
Sep 11, 2010
I have been trying to install centos on my hp servers and when i get to partitions my hard drives the OS does not detect any harddrives. I have 4 scsi drives and i believe a intergrated smart array controller.
View 1 Replies
View Related
May 22, 2011
is there a way to write/unpack .qcow2 hard disk image directly to real hard drive in Linux?(I know it's possible to unpack .qcow2 to .raw and then dd to drive, but I'd like to skip .raw since its large)
View 2 Replies
View Related
Aug 23, 2010
I have a SATA drive that worked fine. Then I installed two more hard drives into my system. When these hard drives are installed, if I try to access the SATA drive in Linux, it will start lightly clicking and then the drive will become unavailable. If I power on the machine without the other two hard drives then it works fine. What could be causing this to happen? I don't think it's heat because the two hard drives are far away from the SATA drive.
View 1 Replies
View Related
Feb 12, 2011
i have ubuntu 10.10 installed on a 40gb hard drive and have setup arch linux on a seperate 160gb drive and am at the Choose bootloader screen of Arch Linux. My question is do i use arch linux to reinstall GRUB or do I choose none and configure GRUB to see both? if its the later can you tell how. Oh and Ubuntu is on sda and Arch is on sdb
View 6 Replies
View Related
Jan 23, 2010
I wanted to know if i can install 9.10 onto a usb flash drive--without using my computers hard drive at all when running ubuntu off the flash drive-
View 3 Replies
View Related
Aug 26, 2010
I just booted one of my computers from a usb drive I had installed Ubuntu 10.04 LTS to, and when I booted it up on that computer, it worked fine. Then, when I powered down the computer and booted it back up to the main hard drive, it booted to the same that my flash drive was running, but my flash drive was not plugged in!! How is this possible? Did it copy itself over my other operating system? There is no trace of it. By the way, that, too, was ubuntu 10.04.
View 2 Replies
View Related
Jun 19, 2011
I would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation
Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.
View 2 Replies
View Related
Mar 23, 2010
I am trying to move a whole bunch of files from one partition on one hard drive to the same partition on another hard drive. Can I mount the same partition (same name, different drives, i.e. /data on /dev/hda1 and /data on /dev/hdb1)and copy those files? Shutdown the server, take out /dev/hda1 and boot up with the new drive and it's /data contents.
View 1 Replies
View Related
Jan 20, 2010
I have ubuntu server acting as a router installed on a 60 gig drive, i'd like to use that drive in another machine and replace it with a 5 gig drive. how can i transfer from the 60 gig drive to the 5 gig drive?
View 9 Replies
View Related
Jun 23, 2010
I am soon going to have to return my intel ssd for replacement. Therefore, I am going to be cloning the 160gb drive to a 320gb drive to keep my system settings while I am waiting for my new drive. I will not change the size of the partitions to fill the 320gb drive. I'll just change the grub settings if I absolutely have to. After that, I am going to have to clone the 320gb drive back to the replacement 160gb drive. Am I going to have problems doing that since I will be going from a larger to a smaller drive?I typically use Clonezilla with the default settings.
View 2 Replies
View Related
Oct 7, 2010
I want to load ubuntu on my home pc. I have two hard drives but not have enough dvd's to back everything up on #2 hard drive. If I load ubuntu on drive 1 can I get in two drive two?
View 2 Replies
View Related
May 30, 2011
I have 350GB external Western Digital USB hard Drive.When I try to remove it from the system by executing Safely Remove Drive menu the fedora 15 system gets stuck.The processor starts giving a hum sound and it goes on even if it is left for half an hour in the stuck state.The Mouse is not working and everything is halted.
View 13 Replies
View Related
Mar 20, 2010
I have minor problem with upgrading a hard drive. I am running an old pentium lll with two hard drives. On the first hard drive I have two partitions of around 90GB each. On the first partition is installed winXP and on the second partition I have Suse 10.3, both booted by grub and living happily side by side. My second hard drive (which is formatted for windows is only 4GB.
My problem arises when I try to replace the 4GB with a 80Gb hard drive. When I disconnect the 4GB drive the system fails to boot up and complains with error 21.
View 8 Replies
View Related
