General :: Hard Drive Malfunctions When Other Hard Drives Are Connected?
Aug 23, 2010
I have a SATA drive that worked fine. Then I installed two more hard drives into my system. When these hard drives are installed, if I try to access the SATA drive in Linux, it will start lightly clicking and then the drive will become unavailable. If I power on the machine without the other two hard drives then it works fine. What could be causing this to happen? I don't think it's heat because the two hard drives are far away from the SATA drive.
I've got Vista installed on my notebook and I've bought an external drive (1,5 TB, but its size shouldn't matter in this case) and after formatting it I left 10 gigs for future purpose. Now, I decided to install 64bit debian on the unallocated 10 gigs. And so I did. To be precise: I have SATA drive inside my lap and hard drive (it's also SATA inside the cover) connected to my lap through USB. Boot sequence was 1)CD/DVD 2)hard drive 3)removable drive. During the installation the installer detected my internal drive as /dev/sda and my external drive as /dev/sdb. I decided to install grub on /dev/sdb (it was logical to me, since I didn't want to mess up my regular drive's MBR). Installer created 5 partitions on my USB drive. After booting from my external drive (look below*) I've got a message saying
Code:
error: no such partition Entering rescue mode... and after that I was in grub rescue console. When I typed ls I've got an output
error: unknown filesystem This occured for all the listed devices... On my internal drive there were (during the installation and running the live cd) 3 partitions detected (vista os, data, rescue disk) so I don't understand the output that ls in rescue console gave me. about booting from external drive: I did that after pressing ESC - I've got a prompt to choose which device I want to boot from - this wasn't working properly; after changing the boot sequence the grub started but with the abovementioned error message...
If there's any info about exact names/types/devices of my installed partitions needed I will run live CD and check it. If any other info is required I will provide it (I tried to describe the problem in the most precise way ) What I was thinking about: maybe there is a problem with ordering of the devices - when I boot from DVD my removable disk is treated as the "second one" and after booting from the removable disk it becames the "first one" or something like that? If any of you have any good info on how mapping of the device names works it would be appreciated, since I couldn't find anything useful or I just don't know what to ask google about.
1) How to install Debian on a removable disk (I had no problems with installing Linux on pendrive but I did that from VirtualBox and it was some time ago) OR how to install GRUB on a removable disk? (unfortunately, I cannot install 64bit system through VirtualBox)
2) What's the logic behind naming devices under /dev? How come the devices in grub have their names mapped as hdx etc and I've read that hdx are the names for IDE/ATA drives and sdx is the proper name for a SATA or USB device
a friend of mine just given me an old 2004 IBM NetVista 8305 desktop and suggested to use Linux Ubuntu which is something new to me. So i installed it via USB memory stick & it works. After installation of the OS I am impressed with functionality & speed. when i conect the external hard drive via usb it doesn't show & i tried my usb flash disc it showed the same problem. I tried both disk in my laptop (Windows XP) & it works.
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
I have a sata drive used for storing music and videos formated with jfs that is somehow corrupted. I can boot the pc with the drive connected using a Slax CD but can not boot using my Slackware install with kernel 2.6.33.2.I can only boot Slackware with this sata drive disconnected I want to try and recover the music and videos on hd with jfsrec. Is there a way to force the boot process with the cabling connected to this drive?
Hard drive is connected to my Inspiron 1525 via USB, plugged in and I'm not seeing the new drive mounted. Restart doesn't fix things and manually trying to mount /dev/sdb1 doesn't work either. The drive I got is preformatted as NTFS and I've been using a logical partition formatted as NTFS as a sort of share drive between my Windows partition and Ubuntu partition, so I know I have NTFS set up properly. This is the hard drive I'm working with for reference.
I got a sort of usb connected device(not an external enclosure) so i can connect a sata hard drive into a machine that only has ide connections but the drive is not mounting. I am not very good at mounting slave hard drives anyway ,,,,never been able to get one happening without help. I am wanting to read this drive as i killed another desktop machine(i think the mb) and i need the data off the hard drive. The drive is shown in a directory and in the media directory. Can't think of what else sorry as i am so tired from testing everything out of the machine that i killed.....
I've installed Fedora 10 short time after it came out. Now I am having some problems unmounting thes drives on restart or shutdown. It hangs at the stage of 'unmounting file system'. I've looked into this matter and discovered that those drives are automatically mounted and shown on the Gnome file browser. As the /etc/fstab indicates, it is not mounted by it. I must have done something to have all the hard drives shown in the file browser and now Fedora seems to be unable to unmount them.
Quote:
# # /etc/fstab # Created by anaconda on Mon Sep 7 20:25:11 2009 # # Accessible filesystems, by reference, are maintained under '/dev/disk'
Is there any performance degradation or complications that arise from having Linux installed on a separate, physical hard disk from Windows in a dual-boot setup? I have a computer that I'd like to dual-boot Ubuntu and Windows but the current hard drive is quite fragmented and the Windows partitioner won't allow me to make a partition large enough to comfortably run Linux+several gigabytes of media that need to be stored. The rig, however, may have room for another internal drive, so I thought that having a separate physical disk reserved completely to Linux would be an easy solution. The tech guy at the local computer store suggested there might be difficulties with this configuration because one drive needs to be the "master" and the other a "slave", resulting in boot complications.
I have an old computer that I want to turn in to a backup server. I was planning on using a 1 TB drive connected by a SATA card since the motherboard only has PATA. However when looking everything I've found makes it sound like I need to install the card for it to work. I want to know if I can install Debian to the hard drive through the SATA card or not?
I installed Ubuntu a few weeks ago and now, It looks like I can't get anything to work through my USB ports. Thumb Drives, extermal hard drive, iPod.... nothing works. When I first got ubuntu, I was able to get a few things to work, but then it just stopped.
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
I have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
I recently bought 320 GB Trancend external hard disk and working fine days back.Earlier i could copy from and to the hard disk with out any issue. I dont know what happened after that now i am not able to write any files in to the external hard disk. This is not NTFS formatted device. here is some of the out put from terminal.
Code: sundar@sundar-sundar:~$ fdisk -l Disk /dev/sda: 120.0 GB, 120034123776 bytes
I have been trying to install centos on my hp servers and when i get to partitions my hard drives the OS does not detect any harddrives. I have 4 scsi drives and i believe a intergrated smart array controller.
is there a way to write/unpack .qcow2 hard disk image directly to real hard drive in Linux?(I know it's possible to unpack .qcow2 to .raw and then dd to drive, but I'd like to skip .raw since its large)
I recently purchased 3 new WD cavier green 500gb drives with the intent of building a raid5 array and running linux. Admittedly I purchased without doing enough research and now I have serious doubts about running an os on raid5 with the onboard controller.So now I am thinking I should run one drive as an OS drive and mirror the other two. I don't have a fourth drive unless someone can convince my wife I need a fourth after already buying 3....
Is it possible to have multiple distributions where ALL distros save their docs to the raid dives? That way I can wipe/install the os and keep my files? I seem to recall that I can be done, just need someone to point the compass.
I am trying to move a whole bunch of files from one partition on one hard drive to the same partition on another hard drive. Can I mount the same partition (same name, different drives, i.e. /data on /dev/hda1 and /data on /dev/hdb1)and copy those files? Shutdown the server, take out /dev/hda1 and boot up with the new drive and it's /data contents.
I have approx. 30x Western Digital SATA 2.5" hard drives ranging from 80GB to 500GB. These are ex-Tandberg RDX QuikStor backup drives that I no longer use and would like to use them as spare laptop hard drives.The only problem is upon installing the drive in a laptop it prompts for a hard drive user password.
Are there any open source methods to wipe the password (and data; I don't care about that)? I've tried using various wiping methods (dd, dban etc.) but the password still remains.Any help is greatly appreciated; I really need these drives.Plugging it in via a USB HDD enclosure shows as /dev/sdb but does not respond to (c)fdisk or show any partitions (/dev/sdb1 etc).
When the computer starts, you will read a flashing message about S.M.A.R.T and a few other things.I have two hard drives. There is a strange noise from the computer when I run it for more than 3 or 4 hours continuously. I firmly believe one of the hard drives is not working properly. I saw a message about a problem in S.M.A.R.T.It was a flashing message. I couldn't read it. I don't run any Windows on the computer. All are Linux. The default is Mandriva.
How do I read the flashing message you see at the start of a computer? I want to find out the damage one replace it with a new one.
I was thinking about this for a while and I haven't come across it in any of my reading. Could you split an os over two drives? Example: drive hda, 35GB xp - 5GB fat32storage / hda1 8GB root - 2GB swap drive hdb 10GB usr - 10GB home -10GB var / hdb 10GB root linux#2 hdb 1GB swap - 9GB user - 5GB home - 5GB tmp I hope I made this clear enough I'm sure someone must have tried this before. Maybe I got too much time on my hands.
I installed Redhat Enterprise 3 on one of my servers. In my haste I didn't properly partition both Hard Drives and only properly partitioned one of them. Thus now I have
Where /dev/sda1 is actually a 80 GB hard drive. Is there anyway I can safely and easily repartition the unpartitioned space without causing a huge mess? I have a very important Oracle database on /dev/sdb1 and thus I want to be able to back it up on the second disk. I can create a partition on that drive?
I am building a home server that will host a multitude of files; from mp3s to ebooks to FEA software and files. I don't know if RAID is the right thing for me. This server will have all the files that I have accumulated over the years and if the drive fails than I will be S.O.L. I have seen discussions where someone has RAID 1 setup but they don't have their drives internally (to the case), they bought 2 separate external hard drives with eSata to minimize an electrical failure to the drives. (I guess this is a good idea)I have also read about having one drive then using a second to rsync data every week. I planned on purchasing 2 enterprise hard drives of 500 MB to 1 GB but I don't have any experience with how I should handle my data
I'm trying to setup a dual boot system with Windows Vista 64 (already installed) and Ubuntu 10.10. I added a new drive which is identical to the one Vista is installed on. When I boot into the LiveCD I can see and mount the second drive and edit it in Gparted. However, when I use the installer it will only bring up the drive that already has Vista installed.
I have 2 hard drives and when I do an auto install.. Ubuntu decides to take both hard drives... how do I prevent this from happening without my intervention?
I have a 3 year old PC with 4 internal SATA ports. My old SATA hard drives, all smaller than 2TB, work fine. If I buy a 3TB SATA hard drive, will it work in Linux? Will Linux with GRUB be able boot from such a hard drive without a BIOS upgrade? With a BIOS upgrade? It's fine for me to upgrade my Linux to the newest kernel.
