Ubuntu :: How Do I Clone A Hard Drive To Different Sized Drive
Jun 23, 2010
I am soon going to have to return my intel ssd for replacement. Therefore, I am going to be cloning the 160gb drive to a 320gb drive to keep my system settings while I am waiting for my new drive. I will not change the size of the partitions to fill the 320gb drive. I'll just change the grub settings if I absolutely have to. After that, I am going to have to clone the 320gb drive back to the replacement 160gb drive. Am I going to have problems doing that since I will be going from a larger to a smaller drive?I typically use Clonezilla with the default settings.
View 2 Replies
ADVERTISEMENT
Sep 18, 2010
This is not a huge deal but I have missing hard drive space, I re-sized an iso with k9copy I then used mv to move it to the other iso like so:
Code: mv this.iso that.iso which moved and renamed it, however I did not get any drive space back by effectively "deleting" the first iso. So my question is do I have an unnamed iso file floating around that cannot be deleted?
View 4 Replies
View Related
Jan 7, 2010
i'm trying to clone a hard drive using dd & netcat.
Quote:
on target:
nc -l -p 1333 |dd of=/dev/sdb
on source:
dd if=/dev/sdb |nc 192.168.0.5 1333
However after a while since the process was initiated I get a
I/O error in filesystem ("....") meta-data dev ...block 0x..... ("xfs_read_buf") error 5 buf count 512 XFS: size check 2 failed
Further digging showed that the target hard drive was less in space by 100 kb. Both are 1 T drives seagte but different models, hence the diff in space maybe.The data on the original drive is only 900 GB.
View 6 Replies
View Related
Feb 13, 2009
how to clone a hard drive i managed to change the drive (12G) on the wife's old laptop for a spanking new 60G where i will be able to install Slackware.Even though her operating system is Windows Millenium everything went smoothly for the transfer , i used an older version of Gparted (0-3.4.10 i think).
View 1 Replies
View Related
Oct 28, 2010
I'm looking to move my 10.04 installation from an 80 GB HD to a 250 GB HD.
Last week, I successfully moved a Windows system from an 80 GB HD to a 320 GB HD using Clonezilla. However, I must have missed a command option, as I wound up with only 80 GB used on the new drive, and the remaining space unused. I used PartedMagic to resize the partition to use the full space, and all is now well.
Back to my Ubuntu move, on the second machine, I currently have three partitions - /, /swap, and /home. I'd like to expand / just a small amount, leave /swap sized as it is, and give most of the drive space to /home (as that is where I am running out of space). I think I have two options:
Option 1: Use Clonezilla to clone the drive (3 partitions), and then use PartedMagic to move/resize the partitions as desired.
Option 2: Use PartedMagic to set up 3 partitions to the sizes I want, then use Clonezilla to copy to the new partitions.
Option 1 seems to be the easier way. But, is there another option, a better way? Perhaps there's a command option in CloneZilla that I'm just not seeing, which would allow me to do the move in one step?
View 7 Replies
View Related
Jul 3, 2011
I currently have a 160GB hhd running Ubuntu 11.04 and Windows XP, with the following partition configuration:
sda1 Windows NTFS (primary-active and boot and system)
sda5 Linux Swap (logical)
sda6 Linux Ubuntu ext3 (root)
sda7 Linux Ubuntu ext3 (home)
sda2 other
I have Grub2 installed, which provides me the choice at boot to start either Ubuntu or XP. This currently works fine.
I want to clone this hhd and transfer to a new, larger hhd, and have several questions, since I don't want to make a mistake with something so crtical. 1) Which software is generally considered the safest, most reliable and easiest to use (dd, Gddrescue, Clonezilla, Paragon, Macrum Reflect, Easeus, Drive Image XML, or something else)?
2) Which software will be able to copy and include both operating systems in the partitions to be cloned?
3) Will that software change the booting process or options in the cloned copy in any way? I've read where using Easeus corrupts Grub2 and thus requires re-installing Grub2!
Are there any other concerns, considerations or factors I need to consider in cloning the hhd; e.g. prior formatting an external hhd, and with what file system? I've also read where FAT32 would be the choice, but don't really know for sure.
View 3 Replies
View Related
Jul 5, 2011
I want to clone an SGI IRIX hard drive over the network. The hardware is ancient, no usb, and the CD rom is shot, its scsi and Im worried I wont be able to get it to boot a live cd.
if I run dd on a running computer, what consequences might there be?
Code:
dd if=/dev/sda | gzip -1 - | ssh user@hostname dd of=image.gz
where /dev/sda is the local IRIX computer and of=image.gz is a free partition else where.
View 8 Replies
View Related
Mar 13, 2011
sudo ddrescue /dev/sda /home/custom/user/sda_image.img /home/custom/user/logfile
problem is would not mount under /mnt to see if it worked
sudo ddrescue /dev/sda /home/custom/user/sda_image.iso /home/custom/user/logfile
the sda_image.img file is 55gb the other one tht is .iso is 0gb so now trying
dd if=/dev/sda of=/home/custom/usr/sda_image.iso
waiting to see what is going on any body got any advice on how to make the image work?
View 9 Replies
View Related
Dec 22, 2010
I need to clone LVM encrypted to a bigger size hard drive.
Need help with MBR, how should I do it?
View 4 Replies
View Related
Jan 16, 2011
I have a very specific issue that I am having trouble resolving. I have an old laptop and a new laptop with a smaller HDD. I want to copy the windows partition from the new lappy to the old bigger HDD so I have room for Ubuntu. All of my files are on a Maverick install on the old lappy. How can I get all my files and windows to the old HDD and into the new laptop. I am a little stuck on this one because of my limited options.
View 8 Replies
View Related
Jun 8, 2011
I have a 3 weeks old PC which I've just finished getting set up with Ubuntu 11.04 and W7 in a Virtual Box. Now the drive has started making rumbling noises and doesn't always boot.The engineer from Dell is coming tomorrow to replace the drive, but what can I do about transferring the whole old drive to the new one in full working order, quickly?
I've been using rsync to keep backups of my home folder, so I've got the data side covered. But I don't really want to spend the next couple of weeks re-installing all the software, printers etc all over again. So is there a quick, easy way of replicating the old drive with partitions, VB, etc (I'm not that good at using the terminal) ?
View 5 Replies
View Related
May 8, 2011
I have a mini ITX computer that runs a software that I have been trying to clone to another hard drive as back up. When I do clone it, it is the exact same copy down to every byte. When I try to boot from the cloned hard drive, it starts booting, then displays some text:
Then is says some of the files are not found including a encryption signer key not found.
I do no know the next step I need to take. Is this becasue it is running off a different hard drive? I do not understand a bzImage too well, but does it have anything to do with that file?
View 4 Replies
View Related
May 20, 2010
I recognize the obvious need to back up the contents and follow a certain duty of care before attempting to clone my failing pata 250g HD to a 1 tera byte sata. What problems if any could come up when cloning from a failing pata to a sata HD? I'd like to make the switch to sata for many reasons if possible. It is indicated that the HP d530 sff here supports both types.
View 2 Replies
View Related
Oct 27, 2010
I am trying to replace an old, smaller, and dying laptop hard drive with a newer one, using a USB external drive. I first tried cloning disk to disk with Clonezilla, but it failed after cloning my root, swap, and /home directories it froze when it tried to reinstall grub. After 2x trying, I switched to dd, which I have never really used (I am fairly new to Linux in general). The actual command I used was:
Quote:
dd if=/dev/sda of=/dev/sdb bs=4096 conv=notrunc,noerror
All seemed ok and after approximately 2 hours my 80GB drive had been cloned onto my new 250GB, with dd giving what appeared to be a satisfactory closure summary. I tried to mount and access the drive from my external USB enclosure but could not view it, though the data is there, I believe, as the size and bytes show... The error that Dolphin is giving me is:
Quote:
error - wrong fstype, bad option, bad superblock on /dev/sdb1 Missing codepage or helper program or other error. When I installed the new drive directly into my laptop, it begins to boot (Sabayon 5.4, 2.6.35 kernel) but almost immediately I get (handwritten down, but this is close):
Quote:
detected real_root
mounting /dev/sda1 on /newroot failed: input/output error
!! Could not mount specified ROOT, try again
!! Could not find the root block device in .
[code]....
I am assuming that my issue has something to do with grub, and maybe specific UUIDs that don't match (?) but I'm not really certain. I have both Grub Legacy 0.9x and the newer Grub 2 installed (Sabayon is already moving over) but I still boot with Legacy, not with the new 2, as I don't know how to switch, and am not sure if I should yet. I thought that dd copied bit for bit, and I added the noerrorï just to try to get it all transferred, so I don't know what went wrong exactly, though something seems wrong with grub and the bootloader, I guess...
View 6 Replies
View Related
Mar 22, 2010
I have a 120 gig drive that I'd like to clone before it fails completely. I was thinking I'd pull the drive from the server and build a separate machine that has it's own os installed and the source and destination drive. Does anyone know of any linux tools will will do a full drive copy? Additionally, If possible, I'd like to move to a larger drive. how I'd migrate the 120 drive to a 400 or so? 1 idea I have is to install os on 2 new drives to where it they will boot, Then boot with one and copy source to the newly created destination drive.
View 6 Replies
View Related
Dec 28, 2009
would it be possible to clone an IDE hard disk (on which I installed Fedora 10) on a SATA hard disk, and that programs can succeed
View 10 Replies
View Related
Jan 25, 2010
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies
View Related
Mar 16, 2010
My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
View 3 Replies
View Related
May 1, 2010
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
View 1 Replies
View Related
Mar 21, 2009
Sometimes when I do anything write heavy such as transferring backup or downloading large files from the net, the machine crashes almost completely.
View 8 Replies
View Related
Jun 3, 2011
I have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
View 6 Replies
View Related
Feb 12, 2011
i have ubuntu 10.10 installed on a 40gb hard drive and have setup arch linux on a seperate 160gb drive and am at the Choose bootloader screen of Arch Linux. My question is do i use arch linux to reinstall GRUB or do I choose none and configure GRUB to see both? if its the later can you tell how. Oh and Ubuntu is on sda and Arch is on sdb
View 6 Replies
View Related
Jan 23, 2010
I wanted to know if i can install 9.10 onto a usb flash drive--without using my computers hard drive at all when running ubuntu off the flash drive-
View 3 Replies
View Related
Aug 26, 2010
I just booted one of my computers from a usb drive I had installed Ubuntu 10.04 LTS to, and when I booted it up on that computer, it worked fine. Then, when I powered down the computer and booted it back up to the main hard drive, it booted to the same that my flash drive was running, but my flash drive was not plugged in!! How is this possible? Did it copy itself over my other operating system? There is no trace of it. By the way, that, too, was ubuntu 10.04.
View 2 Replies
View Related
Jun 19, 2011
I would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation
Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.
View 2 Replies
View Related
Jan 14, 2009
I have 2 ubuntu's: 1 on my ineternal hard drive, 1 on my external
When I startup without my ext drive =>GRUB error 21.
And when I plug it in I can choose: the standard ubuntu kernel is the one on my external, and the original one is listed under other...
I'd like to be able to startup without external hard drive and make the ubuntu on my internal drve the standard.
View 14 Replies
View Related
Jan 20, 2010
I have ubuntu server acting as a router installed on a 60 gig drive, i'd like to use that drive in another machine and replace it with a 5 gig drive. how can i transfer from the 60 gig drive to the 5 gig drive?
View 9 Replies
View Related
Oct 7, 2010
I want to load ubuntu on my home pc. I have two hard drives but not have enough dvd's to back everything up on #2 hard drive. If I load ubuntu on drive 1 can I get in two drive two?
View 2 Replies
View Related
May 30, 2011
I have 350GB external Western Digital USB hard Drive.When I try to remove it from the system by executing Safely Remove Drive menu the fedora 15 system gets stuck.The processor starts giving a hum sound and it goes on even if it is left for half an hour in the stuck state.The Mouse is not working and everything is halted.
View 13 Replies
View Related
Mar 20, 2010
I have minor problem with upgrading a hard drive. I am running an old pentium lll with two hard drives. On the first hard drive I have two partitions of around 90GB each. On the first partition is installed winXP and on the second partition I have Suse 10.3, both booted by grub and living happily side by side. My second hard drive (which is formatted for windows is only 4GB.
My problem arises when I try to replace the 4GB with a 80Gb hard drive. When I disconnect the 4GB drive the system fails to boot up and complains with error 21.
View 8 Replies
View Related