I have ubuntu server acting as a router installed on a 60 gig drive, i'd like to use that drive in another machine and replace it with a 5 gig drive. how can i transfer from the 60 gig drive to the 5 gig drive?
View 9 RepliesMy parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
I am looking for an Open Source software making it possible to make a disk image of an Ubuntu installation as well as a Windows XP installation.I have checked out Clonezilla which almost solved the problem. However, the disk to which you restore needs to be the same size or bigger. I want to restore the whole thingo a smaller disk than the original.I am considering getting myself an SSD disk which will be considerably smaller than the 160 gb disk I have right now. I need it to work for Windows as well. Unfortunately I can't get rid of Windows quite yet I often participate in webinars on GotoWebinar and they do not support Linux ...
View 9 Replies View RelatedI did post a thread yesterday saying a problem I had with installation but now I know what REALLY happened. My hard drive is destroyed lol I think whenever I try to install 11.4 it says "disk failure is imminent". So maybe I was wondering if it is possible to install Ubuntu on a 4gb USB flash drive and use that as my hard drive? If not a USB then maybe an external CD drive (I am on a netbook and I dont mind having a USB inside all the time) So yeah if its possible then thats great I would like to know how.
But if its not possible, or maybe it is but a bit harder I just want to know what I can do because my laptop is currently useless and I dont wanna go back to Windows coz it died on me several times already. Or maybe I can try a different version of Ubuntu?? Also someone might suggest just keeping it in "try Ubuntu" but th internet drivers arent there and I need to restart pc to get it but I cant restart without being fully installed
I am installing a new hard drive to replace my old one that contained the /var and /home directories. I don't want to copy the whole directories, especially from home because there is a lot I don't need in it.What I need to do is set the mount points for the two partitions I have made on the new drive to /var and /home, but it will not let me do this with the other drive still running. I can't unmount /var and /home while the computer is running, and I would guess that having two drives with /var and /home on them would not work.
So, how can I set the mount points on the new drive and copy the files I need from the old to the new one? It would seem that would require two /home partitions to be mounted at the same time, but I don't think that is possible. I am sure there is some way, probably many ways knowing Linux so please,
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies View RelatedTrying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
View 1 Replies View RelatedSometimes when I do anything write heavy such as transferring backup or downloading large files from the net, the machine crashes almost completely.
View 8 Replies View RelatedI have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
View 6 Replies View Relatedi have ubuntu 10.10 installed on a 40gb hard drive and have setup arch linux on a seperate 160gb drive and am at the Choose bootloader screen of Arch Linux. My question is do i use arch linux to reinstall GRUB or do I choose none and configure GRUB to see both? if its the later can you tell how. Oh and Ubuntu is on sda and Arch is on sdb
View 6 Replies View RelatedI wanted to know if i can install 9.10 onto a usb flash drive--without using my computers hard drive at all when running ubuntu off the flash drive-
View 3 Replies View RelatedI just booted one of my computers from a usb drive I had installed Ubuntu 10.04 LTS to, and when I booted it up on that computer, it worked fine. Then, when I powered down the computer and booted it back up to the main hard drive, it booted to the same that my flash drive was running, but my flash drive was not plugged in!! How is this possible? Did it copy itself over my other operating system? There is no trace of it. By the way, that, too, was ubuntu 10.04.
View 2 Replies View RelatedI would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation
Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.
I have 2 ubuntu's: 1 on my ineternal hard drive, 1 on my external
When I startup without my ext drive =>GRUB error 21.
And when I plug it in I can choose: the standard ubuntu kernel is the one on my external, and the original one is listed under other...
I'd like to be able to startup without external hard drive and make the ubuntu on my internal drve the standard.
In a few hours I'll have a new 500GB Sony laptop, filled with the usual Sony rubbish which I'll promptly be replacing with Ubuntu or Crunchbang or something. However, first I want to make a full clone of the drive (including recovery partitions), should I wish to return it to Sony or sell it on in its factory state.
The problem is that the only backup drives I have are less than 500GB - the biggest I have is 250GB or so! So I need to backup and compress on-the-fly.
What's the best way to do this? Presumably dd piped into gzip would do the trick, or does anyone have any other suggestions to accomplish this?
I have recently ghosted, using g4u, an 80 gig drive to a 30 gig drive. The data size is about 15 gig so no problem there.The system does work and it doing everything it should, except for some errors in dmsg log.The thing is though, that the system works! all the services are running and live.And i have years worth of customizations in this machine. Has been running for several years, so i dont just want to reformat and reinstall. Its hard to get linux the way you want it sometimes!So my question is this, is there a way to fix my partition or somehow tell the machine what the current boundries <i>should</i> be?
View 5 Replies View RelatedI wanted to back up my 4Gb boot drive and the new drive I had was slightly smaller. Couldn't find any info on here and precious little on the internet but I have previously used this technique to clone an 8Gb disk onto a 4Gb one. Since I have gained a lot of useful info from this forum over the years its probably time I contributed something. I used my netbook but this would work equally well from a live CD. Note the disk has to be unmounted so you can't use the live system. Firstly your USB stick probably has 2 partitions one for "/" and one for swap.
The first step is to reduce the "/" partition on the source drive to a size smaller than your target drive. I used gparted for this. Next create a partition on your target drive that is the same size or bigger than your newly shrunken partition. I formatted this although I'm not sure this is necessary. Personally I just used the whole drive and used a file on a hard disk as swap. Next you have to use dd to copy the partition.What is important is that you are copying the partition not the drive. So your source would be /dev/sdx1 and target /dev/sdy1 (you will need to find your own values for x&y).
Once again be very careful that you get these the right way around or you will destroy your souce disk. Even better do it in two stages - copy your source to a file and then the file to the target. Now you have a replica of your original disk but it is not bootable. If you are planning to use a swap partition you may as well create it now. Remember you will probably have to change /etc/fstab to read the new swap - at least on my system this was referenced by UUID. No need to change anything for the replicated partition as the UUID came over with everything else.
I am soon going to have to return my intel ssd for replacement. Therefore, I am going to be cloning the 160gb drive to a 320gb drive to keep my system settings while I am waiting for my new drive. I will not change the size of the partitions to fill the 320gb drive. I'll just change the grub settings if I absolutely have to. After that, I am going to have to clone the 320gb drive back to the replacement 160gb drive. Am I going to have problems doing that since I will be going from a larger to a smaller drive?I typically use Clonezilla with the default settings.
View 2 Replies View RelatedI want to load ubuntu on my home pc. I have two hard drives but not have enough dvd's to back everything up on #2 hard drive. If I load ubuntu on drive 1 can I get in two drive two?
View 2 Replies View RelatedI have 350GB external Western Digital USB hard Drive.When I try to remove it from the system by executing Safely Remove Drive menu the fedora 15 system gets stuck.The processor starts giving a hum sound and it goes on even if it is left for half an hour in the stuck state.The Mouse is not working and everything is halted.
View 13 Replies View RelatedI have a volume group that is made up of a number of physical volumes. I am thinking of consolidating all the small physical volumes onto one big drive. Is there any benefit in this, besides making administration easier? How do I go about doing this? From what I have read, it looks like I should have to do the following
1. add the new big drive to the VG
2. use pvmove to move the smaller PV onto the new PV
3. use pvchange -xn to make sure the old PV can no longer be allocated
4. repeat for all the small PVs.
5. use pvremove to remove all the small PVs
Is this the correct procudure to follow?
I have minor problem with upgrading a hard drive. I am running an old pentium lll with two hard drives. On the first hard drive I have two partitions of around 90GB each. On the first partition is installed winXP and on the second partition I have Suse 10.3, both booted by grub and living happily side by side. My second hard drive (which is formatted for windows is only 4GB.
My problem arises when I try to replace the 4GB with a 80Gb hard drive. When I disconnect the 4GB drive the system fails to boot up and complains with error 21.
i have installed fedora 14 with so many libraries ,development tools installed on my pc but i usually have to present some projects which can run on my system .........and can't be executed or compiled due to absence of libraries and tools there so, i there some way to so that i can use this current installation on my hard drive of my pc to some external media like external hard disk and plug and use that installation anywhere on any system..
View 2 Replies View RelatedI've decided that I want to use another, smaller, hard drive for my OS and I'd like to clone /dev/sda onto /dev/sdc. I want it to be an exact clone except my partition for my "/home" will be smaller (since there's not room for it). I was gonna try with dd but I'm not sure if I should build the partition table and use dd-command on one partition at the time? Will this then include GRUB boot loader and will it be working properly?
Do I have to clone the disk completely for it to boot properly? I'm not sure how or where GRUB places itself on disks as you install it. Can I perhaps copy the partitions one by one and then install GRUB from CD afterwards? Should I leave some unallocated space somewhere in between the partitions as I build and clone them?
I'm a bit new to LVM administration, and I have a question that the Clonezilla Live forum referred here. Below is the question.
2010-06-24 07:10:00 UTC
So, I was moving from a 250G disk to a 320G disk because I was running out of space on my laptop. My problem is that my new drive seems convinced that it is only 250G in size, and I'm wondering how to persuade it otherwise. I'm not sure if it matters, but I did use the -k1 option when Clonezilla was restoring in order to resize the partitions proportionally. Here is the output of fdisk -l and pvdisplay:
root@nansen: [/]$ fdisk -l
Disk /dev/sda: 320.0 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 17 133610 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 17 38911 312412851+ 8e Linux LVM
So fdisk knows that the drive is 320Gb, and the sda2 partition is about 319Gb in size. But LVM isn't buying it:
root@nansen: [/]$ pvdisplay
--- Physical volume ---
PV Name /dev/sda2
VG Name VolGroup00
PV Size 232.78 GB / not usable 2.71 MB
Allocatable yes
PE Size (KByte) 32768
Total PE 7449
Free PE 1
Allocated PE 7448
PV UUID RKhtpa-J34H-GnvD-26v3-bAEI-wccm-f55hwS
Is there some sort of pvchange command that I need to run? Here is some more info in case you need it.
root@nansen: [/]$ pvs
PV VG Fmt Attr PSize PFree
/dev/sda2 VolGroup00 lvm2 a- 232.78G 32.00M
root@nansen: [/]$ df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00 225G 209G 4.5G 98% /
/dev/sda1 127M 12M 108M 10% /boot
tmpfs 125M 0 125M 0% /dev/shm
steven_shiau (Clonezilla Live moderator)
2010-06-24 14:03:48 UTC
Option "-k1" is only for partition size, it won't deal with LVM yet. I think you need other tool to resize the LVM.
i know that my question is not according to the rule of Hardware.Before posting I thought a lot.But i found this forum helpful in many ways. So my question is should I consider of installing a cooler(fan) for Hard drive.
View 9 Replies View RelatedI have a Toshiba laptop with BIOS that will not recognize USB as a boot medium (I have purchased two USB 'thumb' drives with Distro's that do boot but the BIOS see them as HDD devices!)I did manage to install and boot a distro from the USB HD but ended up with the USB drive having to be connected' to select any of the OS partions, to boot anything.I do realize that somehow, when installing the new distro on the USB drive, I changed the GRUB configuration to be on the USB drive which obviously I did not want, so can
View 5 Replies View RelatedI have a dual boot computer with slackware_64 13.1 and windows.
I have a 120G ide hard drive that I need to add to my computer.
Adding this hard drive changes the drive device id's and slackware won't boot.
as installed, my drives look like this:
When I add the extra hard drive, it looks like this:
I know there is a way to make an initrid and to use the uuid identifications for the drives, and even use labels instead of the long uuid's, but I'm unfamiliar with this process, so I was hoping somebody that's done this before might point me in the right direction.
Is Ubuntu like windows and can you download Ubuntu to a flash drive or external hard drive and if so what kind?
View 4 Replies View Relatedubuntu 8.04 server can not detect seagate sata hard drive 2tb or sata Lg dvdrw x22 sata drive .is it possible to install it without buying a pci ide sata card?is it possible to get a driver for sata driver and sata drive that can be recognise by ubunto 8.04 server ?or to get the files for 1.44 floppy diskdoes the late edition of unbutu recognise sate hdd and sata cdrw drive automaticly during the installation of the unbutu?
View 1 Replies View Related