General :: Erase Everything On Hard Drive Before Installing?
Jun 22, 2011
After installation, when starting to boot, I have several choices showing:
1)Ubuntu, w/ Linux 2.6.38-8-generic pae
2)Ubuntu, w/ Linux 2.6.38-8-generic pae (Recovery Mode)
3)Memory test (memtest 86+)
4)Memory test (memtest 86+, serial console 115200
5)Windows Server 2003 For Small Business Server (on /dev/sdd1)
I used #1 and I only have a blank screen.
I used #2 and I went into recovery mode, but I keep getting the error message: "No root
file system is defined. Please correct this from the partition.
I just want to erase all of numbers 1 to 5 and start clean. what should I do?
View 8 Replies
ADVERTISEMENT
Jun 18, 2011
I got 8.10 to load and run on my set up, got disc burned ready for fresh install but won't boot from disc? erasing the drive is no issue so no problem there, i at least have a taste for this now and are liking it.is there a way to erase the hard drive, to get the disc to boot so i can install a supported version? i have kubuntu 11.04 ready to go.from playing on this kde version am really impressed and like this.smokes windows all to pieces, though i like my games for window too
View 8 Replies
View Related
Dec 19, 2010
I bought a new 2.5 inch SATA laptop hard drive and mounted it in an external enclosure for use as an external backup drive. I had a whale of a time getting it formatted (ref post), but finally did by putting the bare drive into a laptop and used Ubuntu to partition and format as part of installing. Then I remounted the bare drive back into the enclosure and sure enough now I can now see the drive.
So now I want to erase the files from the backup drive. Problem is, Ubuntu won't let me delete or add any files. In Nautlis, if I select the files and "right click", Move to Trash is grayed out. If I press the delete button, nothing happens. If I try to copy a new file to the backup drive it says "permission denied". If I go into the Properties .> Permissions for the drive everything is grayed out so I can't change the permission. It also says "You are not the owner so you cannot change permissions".
View 7 Replies
View Related
Aug 29, 2010
I would like to completely erase my hard drive and install Ubuntu 10.04 on again fresh. I think some files have become corrupted from a power cut that I had last night whilst the laptop was plugged in (and turned on).
I'm not bothered about completely wiping the hard drive since there are no important files on it (at most there are just a lot of packages I downloaded from the repro...) I don't have any Windows installations either - it's just a simple; wipe the hard drive and reinstall all over again case
View 2 Replies
View Related
Feb 24, 2010
I bought a MENQ easy PC e790 with 2GB flsdh memory and 128 M RAM but no hard drive. It comes with Windows CE 5.0 The specs are as follows:
CPU: Samsung 400MHz/533MHz processor
RAM: 128MB
ROM: 2GB
OS: Microsoft Windows CE 5.0
Pixel resolution: 800 x 480 pixels
code....
How can linux be installed in CEs place and what distro would be best?
View 5 Replies
View Related
Oct 20, 2009
I tried to load Red Hat Linux 4 on my PC, which has 945 MB, Core 2 Duo Processor, 2GB RAM, 250GB SATA HDD. But i couldnt do so as it did not detect the hard drive and was asking for drivers. I changed the SATA settings to Legacy but still it didnt recognise the HDD...I have Windows XP SP3 also installed on it.
View 2 Replies
View Related
Jul 31, 2009
I have a SATA hard drive from a crashed system that was running Ubuntu 8.04. I want to install it in a Ubuntu 8.10 system and use it for file storage. How do I install and reformat it?
View 3 Replies
View Related
Apr 23, 2011
I've got Vista installed on my notebook and I've bought an external drive (1,5 TB, but its size shouldn't matter in this case) and after formatting it I left 10 gigs for future purpose. Now, I decided to install 64bit debian on the unallocated 10 gigs. And so I did. To be precise: I have SATA drive inside my lap and hard drive (it's also SATA inside the cover) connected to my lap through USB. Boot sequence was 1)CD/DVD 2)hard drive 3)removable drive. During the installation the installer detected my internal drive as /dev/sda and my external drive as /dev/sdb. I decided to install grub on /dev/sdb (it was logical to me, since I didn't want to mess up my regular drive's MBR). Installer created 5 partitions on my USB drive. After booting from my external drive (look below*) I've got a message saying
Code:
error: no such partition Entering rescue mode... and after that I was in grub rescue console. When I typed ls I've got an output
Code:
(hd0) (hd0,msdos1) (hd1) (hd1,msdos5) (hd1,msdos2) (hd1,msdos1)
When I tried to type
Code:
ls (hd0)/
I only got a message
Code:
error: unknown filesystem This occured for all the listed devices... On my internal drive there were (during the installation and running the live cd) 3 partitions detected (vista os, data, rescue disk) so I don't understand the output that ls in rescue console gave me. about booting from external drive: I did that after pressing ESC - I've got a prompt to choose which device I want to boot from - this wasn't working properly; after changing the boot sequence the grub started but with the abovementioned error message...
If there's any info about exact names/types/devices of my installed partitions needed I will run live CD and check it. If any other info is required I will provide it (I tried to describe the problem in the most precise way ) What I was thinking about: maybe there is a problem with ordering of the devices - when I boot from DVD my removable disk is treated as the "second one" and after booting from the removable disk it becames the "first one" or something like that? If any of you have any good info on how mapping of the device names works it would be appreciated, since I couldn't find anything useful or I just don't know what to ask google about.
1) How to install Debian on a removable disk (I had no problems with installing Linux on pendrive but I did that from VirtualBox and it was some time ago) OR how to install GRUB on a removable disk? (unfortunately, I cannot install 64bit system through VirtualBox)
2) What's the logic behind naming devices under /dev? How come the devices in grub have their names mapped as hdx etc and I've read that hdx are the names for IDE/ATA drives and sdx is the proper name for a SATA or USB device
View 3 Replies
View Related
Mar 3, 2011
The XP partition ceased to boot (in fact when it seems to start Windows, it re-boots once and again). I can access the XP partition from Ubuntu 9.10
If I boot with the WXP CD and reinstall it in the original NTFS partition, will it wipe the boot menu out, loosing any chance to boot in Linux?
View 8 Replies
View Related
Jun 19, 2011
I would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation
Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.
View 2 Replies
View Related
Jan 25, 2010
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies
View Related
Mar 16, 2010
My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
View 3 Replies
View Related
May 14, 2010
I recently got a computer donated to me for free from my Computer Science class, as the teacher couldn't figure out what the problem was that was preventing him from booting to the startup screen (all I could figure out was that the slot the memory card was in was bad, so I switched slots and got it working). The hard drive on the computer was wiped with a disk nuker called DBAN. Now I would like to install a Linux OS on the computer, but whatever disc or distro I try gives me similar "unable to read" errors. I would like to know if there's anything software-wise I need to do before attempting to replace any hardware. An example of the error I'm getting is as follows (using a mandriva livecd):
/etc/rc.d/rc.sysinit: line 1281: /var/log/dmesy: Read-only file system
SQUASHFS error: sb_bread failed reading block 0xa6e58
SQUASHFS error: unable to read cache block [29b963ea:782]
SQUASHFS error: unable to read directory block [29b963ea:782]
Anyone know what I need to do to get this fixed so that I can install a Linux distro?
View 5 Replies
View Related
Nov 24, 2010
I have been playing around with Linux Fedora 14 for a while but would like to expand my skills. I am running Fedora 14 on a usb drive connected to my laptop via an e-sata connection. I have approx. 165 gig of space on the drive at present and I would like to dual-boot with Suse 11.3. I have set-up my bios to boot via my usb hard drive. If possible I would like to show my available o/s when I boot my fedora setup. I am probably not explaining this very well but basically I want to be able to run the 2 linux o/s from my usb drive.
View 1 Replies
View Related
Apr 6, 2011
I had a laptop with a partition for windows and linux, but I decided to thorw away the partition for windows and add it to the linux partition. So i read this was possible with gparted, burned a cd, deleted the windows partition and resized the linux partition to the full space.
GParted did it work, but when it was nearly finished it said it failed. When I rebooted the laptop, it gave me hard disk errors of the type: DRDY ERR UNC. I couldn't solve the problem, so I wanted to clear the whole disk. I have been trying to accomplish this with the Debian boot CD, but it says it can't do that anymore. How to completely erase my hard disk?
View 2 Replies
View Related
Feb 16, 2010
If i install a brand-new hd, do i have to do anything to it? I mean format or
dd if=/dev/zero of=/dev/sda count=1024 bs=1024
or can i just install the hd and go on to install debian?
View 2 Replies
View Related
Oct 12, 2009
I have been trying to figure out how to format my hard drive when I'm installing Fedora 11. When I boot from the live disk, all installation were done automatically, so I didn't see how I can do it. I tried googling it, but didn't find anything on how to do it either.
View 3 Replies
View Related
Nov 7, 2010
I have Fedora 14 installed on my usb drive, works perfectly. What I would like to do is:- install Open Suse on the same drive, sharing the same swap, boot section but splitting or resizing the home partition, can this be done? I installed Fedora by booting up from a disc, plugging in my usb hard drive and then installing to that. Would I follow the same procedure for my 2nd installation, I think so but am open to correction. My laptop bios supports booting from disc and I have some 204 gig of free home space.
View 1 Replies
View Related
Feb 2, 2010
I just bought WD External Hard drive for my laptop and found out that there is no support for Linux. I am running Ubuntu 9.10 and need advice on installation.
View 9 Replies
View Related
Apr 24, 2010
So i have a computer running ubuntu, but i need to use this computer to install another OS to a hard drive connected via USB that will be installed on a laptop. How do i do this with an ISO file?
View 2 Replies
View Related
Aug 20, 2010
I have tried to install version 10.04 on a 1TB WD Caviar Green SATA drive. When I try to install from the install menu, the system cycles through the dots under the Ubuntu title for several minutes. I also get the same response when I try to check the disk. The system is an HP a1020n system.
View 1 Replies
View Related
Nov 3, 2010
I have pac on my hard. I need software to install on my hard drive, not on the Internet. How I set Ubuntu to do this?
View 2 Replies
View Related
Feb 2, 2011
How do I format another drive to "accept" Linux and delete/erase Windows?
View 6 Replies
View Related
Feb 20, 2010
I looked around on these forums and google and came to no solution so, I decided to make this thread. I'm using Windows XP and after I downloaded and tested out Ubuntu 9.10, I decided I'd like it as a second OS, can I install Ubuntu on my external hard drive (1TB)? would installing on an external hard drive take away the risks of losing data etc? If I installed Ubuntu on my external hard drive would it delete any files already on my hard drive?
View 9 Replies
View Related
Apr 19, 2011
I tried to do this and something went wrong, and caused so much trouble that I decided I didn't want to do it at all. Then I changed my mind today, and decided I'll try again even after all that happened.
View 4 Replies
View Related
May 19, 2011
At present I have a hard drive with three primary partitions and one extended (logically split).
I'm runnining win 2k pro in each primary partition.
I'm about to reformat the middle primary partition and would like to take this opportunity of trying Ubuntu using the middle primary partition.
I'm using GAG to switch from one partition to another.
Is there any reason why trying Ubuntu in the middle partition would cause problems.
I think I read that Ubuntu can mess up the MBR.
View 1 Replies
View Related
Apr 9, 2009
I have got a hold of a extra hdd along with a hdd enclosure. I have tried looking for information on how to install linux on to one but haven't been completely successful on my search. So I turn to all of you. I was also wondering if its possible to have it were I can use it on multiple computers so I can use it for computer repair.
View 3 Replies
View Related
Feb 18, 2010
I partitioned my hard drive on my computer with G-parted, the second partition (sda3) has data stored on it. I use to have Karmic Koala on sda1, but something went wrong and I want to install it back on sda1. How would I do this without losing my data on sda3? When I use the live disc, it want to install it onto sda3. I cannot figure out how to install it only on sda1.
Also, when I stored data, I want to store it on the sda3 partition. I already have on that partition a /jason file which was my old Karmic Koala.
View 7 Replies
View Related
Aug 29, 2010
I have added a 1.0 Tb USB HDD and would like to install games, extra software, etc. on it when using apt-get or Synaptic but I can not find any info on doing so.
View 5 Replies
View Related
Jun 6, 2011
I have a HP Compaq 6710b notebook with W7 on it. I want to use Ubuntu for hobby activities, but as this is a company notebook, W7 should remain intact. I decided to install Ubuntu to an external drive.I set BIOS boot order to CD-USB-HDD.I attached a 2.5" 250GB WD Passport usb hard disk and installed Ubuntu to it from the CD.As a result, the clean install doesn't boot, I get a mere grub console (normal, not rescue).
Examining the situation I learned, that during Live CD session the inner hdd is hd0 and usb drive is hd1. Grub.cfg gets compiled to use /dev/sdb.When booting from usb drive, BIOS makes it to be hd0 and inner hdd becomes hd1 so grub tries to load kernel from W7 partition (and can't find it, I wonder why? )How to fix problem? Although grub.cfg is supposed not to be edited, may I change every sdb to sda in it?
View 3 Replies
View Related
