Ubuntu :: Update Grub Doesn't Work - Error
Jan 21, 2010i was updating my grub.cfg, by running sudo update-grub, i get a lot of errors:
[code]...
how do i make it so it can open /dev/sdf and ge it's disk size so my grub will update correctly?
ADVERTISEMENT
Ubuntu :: Grub Doesn't Work Anymore Since Update
Oct 25, 2010I've got a double boot system (Windows XP Pro and Ubuntu Maverick). Since I updated Grub2, Grub doesn't work anymore! I'd tried this (because I HAD that error). But since than, I'd a black screen (harddisk didn't anything, and Grub too...) And now, after using a couple of these commands via the Ubuntu Lucid Lynx Live CD I get a mini bash in Grub, but no entry's to one of the two systems! What's wrong, and what do I have to do? (and what did I wrong?
View 7 Replies View RelatedUbuntu :: Update Grub Doesn't Work - Centos 5 Not Detected
Dec 24, 2010I have installed ubuntu and Centos 5 , but when i do sudo update-grub , the new centos 5 is not detected. Some days ago i did the same (i installed ubuntu , and then Centos 5) , but i had to format the hard disk because some problems i had. The thing is that in that first time update-grub worked , but now not , why? Shouldn't be detected this time too? I have to manually add the new entry to the grub no?
View 4 Replies View RelatedUbuntu :: Grub Rescue Error Unknown Filesystem - Fsck From A Live CD But It Doesn't Work
Sep 16, 2010Yesterday my computer froze using ubuntu 10.1 so i turned the power off, then back on, now i get this message when trying to boot: error unknown file system Grub Rescue>
I tried fsck from a live CD but it doesn't work.
Ubuntu :: Grub Update Error "update-grub Head: Cannot Open `/boot/grub/video.lst' For Reading: No Such File Or Directory"
Apr 7, 2010after doing an upgrade to 10.4 and updating grub I get this message. how do I address this
[Code]...
Fedora Networking :: After 'yum Update'ing Iwconfig Key Doesn't Work - Error Indicating 'invalid Argument'
Apr 4, 2011I updated my system from FC13 2.6.34.7-66 to 2.6.34.8-68 for both the kernel and the kmod-wl RPM's. After doing so, iwconfig wlan0 key 1234567890 no longer works. I get an error indicating 'invalid argument'. If I reboot using the previous kernel/wl.ko module, it works The size of the wl.ko module increased in size by almost 30%. Did I somehow get the wrong RPM?
View 2 Replies View RelatedUbuntu Installation :: "Error Booting Operating System" - Sudo Grub; Root (hd0.0)...) Doesn't Work
Mar 1, 2011I installed 10.04 (clean install) on a 250G drive (partitioned to 107G for the system files). It was working fine, until I wanted to install Window$ for the use of Adobe stuff. I popped the Windows XP disc in, it loaded its files, then I tried to choose a partition for installation. There was an error saying that I can't do that, and needed to delete a partition blah blah. I thought it was too much trouble, so I quit and just wanted to use my 10.04. Booted, and it says "Error booting operating system" I WAS SHOCKED.
I tried to install grub (but don't need that right? I DO NOT want to dual boot now), but the usual method ( the sudo grub; root (hd0.0)...) doesn't work ,because something like "stage1" is missing. I tried many methods by still the same error. The reason I do not want a clean install is that I did many fixes on my 10.04 so that it would work with my EeePC 1001pxd, and I do not want to go through that again. I will be checking my email frequently on other computers if I have a chance.
Ubuntu Installation :: Boot/grub/win7 - Testdisk/update-grub Method, But It Didn't Work?
Mar 4, 2011I have 2 hard disks. sda,sdb
In sda, I have 4 partitions, and I have windows 7 in one of the extended partitions [not in the primary partition].
In sdb, I have 3 partitions. 2 for storage, and 1 10GB drive for Ubuntu. Again, Ubuntu is not of a primary partition.
I had ubuntu 10.04 running on that for a long time. However, I wanted to reinstall ubuntu and use 10.10.This is what I did EXACTLY:Booted from Ubuntu install CD
Chose advanced istall
Selected sdb3 for Ubuntu
I installed GRUB2 on the SAME partition as Ubuntu aka sdb3 Installed then rebooted
I can boot into Ubuntu fine, but whenever I select Windows 7 bootloader from the GRUB menu, the screen goes black, and my PC reboots.
Boot Info:
Code:
Boot Info Script 0.55 dated February 15th, 2010 [code]....
ls: reading directory sda6/: Input/output error
I have tried the testdisk/update-grub method, but it didn't work.
Ubuntu :: Keyboard Doesn't Work In Grub?
Jun 2, 2011after I updated my BIOS , my keyboard didnt work in grub , but I can use it before grub.
View 2 Replies View RelatedDebian :: Apt Get Update Doesn't Work
Jan 3, 2011i want to apt-get update. But it is not working.
[code]...
Is it something that is wrong in the source.list?
CentOS 5 :: Yum And Php Doesn't Work After Update To 5.3
Apr 6, 2009I updated centos from 5.2 to 5.3 as recommended:
yum clean all
yum update glibc*
yum update
Update was successful (I didn't see any errors). Then I rebooted pc and found out that my web is extreamly slow. In httpd logs I found: php -> file_get_contents [URL] always dies (timeout error, but somedomain.com is fine, I can telnet it easy on 80) I was wounder if it's update problem and tried yum:
>yum update Loaded plugins: fastestmirror Determining fastest mirrors Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=5&arch=i386&repo=os error was [Errno 4] IOError: <urlopen error (-3, 'Temporary failure in name resolution')> Error: Cannot find a valid baseurl for repo: base
so you doesn't work too... I have no proxies, I tried to reboot pc, I tried: yum clean all
CentOS 5 :: After Update To 5.5 Yum Doesn't Work
Jun 14, 2010after i update my Server to 5.5 i get the following error
[root@Linux /]# yum update
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=5&arch=x86_64&repo=addons error was
[Errno 14] HTTP Error 407: Proxy Authentication Required
Error: Cannot find a valid baseurl for repo: addons
i export the proxy but still not working,
Ubuntu :: 9.10 Synaptic And Update Manager Doesn't Work?
Jan 13, 2010I got this error message today when i ran sudo update
E: Type 'See' is not known on line 2 in source list /etc/apt/sources.list
E: Type 'n' is not known on line 2 in source list /etc/apt/sources.list.d/ubuntu-wine-ppa-karmic.list
and i cant burn dvd with brasero also my sis760 doesnt work on this
im trying to switch back to windows but i need to copy the image to a dvd
but brasero doesnt work and when ever i use the software center i see nothing under the categories
Ubuntu Installation :: Automatic Update Doesn't Work
Mar 20, 2010I have a kind o Kubuntu-Studio 9.10
I installed from Ubuntu Karmic minimal, so i did install KDE.
i have update-manager-kde, update-notifier-kde and kpackage kit installed. for manual installing i use synaptic though.
in the repositry-manager the automatic updates are anabled (daily).
but it is not checking for updates. i checked manually in synaptic, and there are updates available.
so, how do i let it check automaticly for updates?
OpenSUSE :: Automatic Update Doesn't Work After 11.2
Jan 4, 2010I installed from scratch 11.2, but i see now that the Automatic update doesn't work. I run "Refresh" on Updater Applet and it come up with an error: PackageKit Error repo-not-available:
View 9 Replies View RelatedUbuntu Installation :: Internet Sharing Doesn't Work After Update From 9.04 To 9.10
Jan 4, 2010After upgrading Jaunty to Karmic internet sharing (iptables) stoped working. Nothing in iptables configuration was changed.
Code:
# iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
[code]....
Ubuntu :: Apt-get Update Doesn't Work (Cannot Initiate The Connection To Connect )?
Jan 3, 2011I am working on ubuntu (Xubuntos) using VMware virtual machine. when I enter apt-get update it gives following error;
Code:
xubuntos@xubuntos-tinyos:~$ sudo apt-get update
Code:
Err http://tinyos.stanford.edu edgy Release.gpg
Cannot initiate the connection to 3127:80 (0.0.12.55). - connect (22 Invalid argument)
Err http://tinyos.stanford.edu edgy/main Translation-en_US
[Code]...
Ubuntu :: 'Install Updates' Button On Update Manager Doesn't Work?
Jul 22, 2010Update manager pops up telling me there are new updates, but clicking on the 'Install Updates' button does nothing.However, if I click on Settings, then just close the settings dialog,it then says 'Starting Update Manager' and when that finished, the 'Install Updates' will work, but I have to do this every time I restart the computer.
View 9 Replies View RelatedDebian :: Gnome Update Manager Doesn't Work?
May 25, 2010I've installed the GNOME Update Manager (0.68-debian.7) from the official Debian package archive. However, after checking for new packages and clicking "Install the updates", the update manager asks for rights and then just checks for new updates again. Selecting different packages didn't help either, it just checks for updates again and doesn't update anything. Has anyone experienced the same problem
View 6 Replies View RelatedFedora :: Wireless Doesn't Work After Update Of Kernel
Jul 13, 2011Dell Studio 1555 (Wireless WLAN 1397 Half MiniCard (4312bg)) Wireless doesn't work after update of kernel (kernel-PAE-2.6.38.8-35.fc15.i686)
Quote:
Originally Posted by iwconfig
# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
What should I do to repair wireless?
OpenSUSE :: KDE 4.7.1 Update - Plasma Stuff Doesn't Seem To Work At All
Sep 9, 2011I just performed a KDE update from 4.7.0 to 4.7.1 on my OpenSUSE 11.3 64-bit machine and my desktop is in bad shape: the plasma stuff doesn't seem to work at all...and I don't have any panels...the default one on the bottom of the screen is gone also. I tried creating a new user in Yast, but when I log in I get a blank black screen. KDE seems to be pooched!
View 9 Replies View RelatedNetworking :: IP Forwarding /NAT Doesn't Work After System Update?
Oct 22, 2009I used the following 2 rules in iptables to forwarding some packagesiptables -t nat -A PREROUTING -p tcp --dport 8000 -j DNAT --to-destination 192.168.0.244:8000iptables -t nat -A POSTROUTING -p tcp --dport 8000 -j MASQUERADEIt works perfectly before, the kernel was 2.6.18-92.1.22.el5.After we did a update, the kernel now is 2.6.18-128.7.1.el5.and the forwarding is stop.I just wondering where can I get some debug information. I checked /var/log/message, dmesg ... seems nothing there.
View 1 Replies View RelatedOpenSUSE Hardware :: After Recent Update Microphone Doesn't Work
Mar 24, 2010Microphone used to work well, but now it does not Indicator in Gnome sound properties does not move and there is no sound in Skype.
View 2 Replies View RelatedOpenSUSE Install :: 11.2 Driver Update Disk Doesn't Work
May 19, 2010I've patched my kernel to enable my IDE-mode SATA drivers (ata_piix.c), and everything works fine. But when I attempt to create a Driver Update Disk with this structure, it doesn't work (though the same format works for SLES11):
[Code]....
OpenSUSE Network :: Update Applet Doesn't Work With Connection
Apr 5, 2010i have huawei usb stick modem, i'm connecting to internet with wvdial command, i have configured the file "wvdial.conf" to be able to connect, everything works fine i guess but the update applet still show me the message
Code:
Unable to check whether updates are available
connect to the internet and connection manager too .. it tell me i'm not connected, i think i must configure my connection in an other way .. but i don't know how ..
OpenSUSE Wireless :: Internet Doesn't Work - Nothing In Update And Firefox
Jun 4, 2010(Beginner)Just installed openSUZE 11.1 Dual boot with Vista. I can set up my wireless settings, wep, etc and it says it connects just fine. But when I try to USE the internet it doesn't work. Nothing in update, nothing in firefox. It says it is connected but it's acting like something is blocking it.
View 2 Replies View RelatedFedora Hardware :: Touchpad Doesn't Work When Trying To Set Vga Mode In Grub.conf
Aug 22, 2010I just tried setting my vga mode in grub.conf so that I can have my boot splash back after disabling nouveau. Works great. Problem is, now, that after doing this my touchpad is disabled. Anyone else run into this? I'm on an HP dv6, FC13, vga=0x37b. I remove vga mode setting and touchpad works again.
View 1 Replies View RelatedOpenSUSE Install :: 11.4 /Win7 2 Hard Drives - Grub Doesn't Work
Apr 20, 2011The installation went smoothly however, I have installed SuSE11.4 on my 2nd Hard Drive. Now Grub doesn't work and I want to know where and how to install it.
View 9 Replies View RelatedFedora :: Kernel Update Doesn't Edit Grub.conf Vmlinuz And Initramfs Missing?
Dec 23, 2010after yesterday's update to kernel 2.6.35.10-72 my grub.conf didn't get updated and ll /boot shows that neither vmlinuz or initramfs exist for that kernel. uname -r though tells me I'm running 2.6.35.10-72.
How can I do that? and on another more reallystic matter how can I generate the missing files so I can manually update grub.conf?
Ubuntu :: Error On Running Update-grub
Oct 10, 2010I have an Acer Aspire One D250 with Ubuntu 10.10 Desktop installed on it, coexisting with a 12 GB Windows Vista restore partition The restore partition does not show up in GRUB like it used to, when I run sudo update-grub, I get:
Code:
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-2.6.35-22-generic
Found initrd image: /boot/initrd.img-2.6.35-22-generic
Found memtest86+ image: /boot/memtest86+.bin
ls: cannot access /var/lib/os-prober/mount/boot
BOOT: No such file or directory
[Code]...