CentOS 5 :: Yum And Php Doesn't Work After Update To 5.3
Apr 6, 2009
I updated centos from 5.2 to 5.3 as recommended:
yum clean all
yum update glibc*
yum update
Update was successful (I didn't see any errors). Then I rebooted pc and found out that my web is extreamly slow. In httpd logs I found: php -> file_get_contents [URL] always dies (timeout error, but somedomain.com is fine, I can telnet it easy on 80) I was wounder if it's update problem and tried yum:
>yum update Loaded plugins: fastestmirror Determining fastest mirrors Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=5&arch=i386&repo=os error was [Errno 4] IOError: <urlopen error (-3, 'Temporary failure in name resolution')> Error: Cannot find a valid baseurl for repo: base
so you doesn't work too... I have no proxies, I tried to reboot pc, I tried: yum clean all
View 1 Replies
ADVERTISEMENT
Jun 14, 2010
after i update my Server to 5.5 i get the following error
[root@Linux /]# yum update
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=5&arch=x86_64&repo=addons error was
[Errno 14] HTTP Error 407: Proxy Authentication Required
Error: Cannot find a valid baseurl for repo: addons
i export the proxy but still not working,
View 9 Replies
View Related
Dec 24, 2010
I have installed ubuntu and Centos 5 , but when i do sudo update-grub , the new centos 5 is not detected. Some days ago i did the same (i installed ubuntu , and then Centos 5) , but i had to format the hard disk because some problems i had. The thing is that in that first time update-grub worked , but now not , why? Shouldn't be detected this time too? I have to manually add the new entry to the grub no?
View 4 Replies
View Related
Jun 27, 2009
This will be a little long (having read Phil's 'how to ask questions' FAQ). I'm trying to get OpenVPN working between my CentOS server and some Windoze laptops running XP. There seems to be plenty of sample
config files available, but to date, none of them have worked for me. Pulling out my trusty Wireshark, I've found some clues,
BACKGROUND:
My local subnet (NAT'ed by my gateway router) is 192.168.52.x. My router has been configured with a conduit (port-forward) for port 1194 (the standard OpenVPN port), which points towards my CentOS server.The CentOS server is .52.112, and the supplicant is .52.110. I have tried the lient both inside and outside my local subnet, with no difference in events or outcomes.
[Code]...
View 2 Replies
View Related
Jan 3, 2011
i want to apt-get update. But it is not working.
[code]...
Is it something that is wrong in the source.list?
View 14 Replies
View Related
Jan 4, 2010
I installed from scratch 11.2, but i see now that the Automatic update doesn't work. I run "Refresh" on Updater Applet and it come up with an error: PackageKit Error repo-not-available:
View 9 Replies
View Related
May 25, 2010
I've installed the GNOME Update Manager (0.68-debian.7) from the official Debian package archive. However, after checking for new packages and clicking "Install the updates", the update manager asks for rights and then just checks for new updates again. Selecting different packages didn't help either, it just checks for updates again and doesn't update anything. Has anyone experienced the same problem
View 6 Replies
View Related
Jul 13, 2011
Dell Studio 1555 (Wireless WLAN 1397 Half MiniCard (4312bg)) Wireless doesn't work after update of kernel (kernel-PAE-2.6.38.8-35.fc15.i686)
Quote:
Originally Posted by iwconfig
# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
What should I do to repair wireless?
View 2 Replies
View Related
Sep 9, 2011
I just performed a KDE update from 4.7.0 to 4.7.1 on my OpenSUSE 11.3 64-bit machine and my desktop is in bad shape: the plasma stuff doesn't seem to work at all...and I don't have any panels...the default one on the bottom of the screen is gone also. I tried creating a new user in Yast, but when I log in I get a blank black screen. KDE seems to be pooched!
View 9 Replies
View Related
Jan 13, 2010
I got this error message today when i ran sudo update
E: Type 'See' is not known on line 2 in source list /etc/apt/sources.list
E: Type 'n' is not known on line 2 in source list /etc/apt/sources.list.d/ubuntu-wine-ppa-karmic.list
and i cant burn dvd with brasero also my sis760 doesnt work on this
im trying to switch back to windows but i need to copy the image to a dvd
but brasero doesnt work and when ever i use the software center i see nothing under the categories
View 9 Replies
View Related
Mar 20, 2010
I have a kind o Kubuntu-Studio 9.10
I installed from Ubuntu Karmic minimal, so i did install KDE.
i have update-manager-kde, update-notifier-kde and kpackage kit installed. for manual installing i use synaptic though.
in the repositry-manager the automatic updates are anabled (daily).
but it is not checking for updates. i checked manually in synaptic, and there are updates available.
so, how do i let it check automaticly for updates?
View 3 Replies
View Related
Oct 25, 2010
I've got a double boot system (Windows XP Pro and Ubuntu Maverick). Since I updated Grub2, Grub doesn't work anymore! I'd tried this (because I HAD that error). But since than, I'd a black screen (harddisk didn't anything, and Grub too...) And now, after using a couple of these commands via the Ubuntu Lucid Lynx Live CD I get a mini bash in Grub, but no entry's to one of the two systems! What's wrong, and what do I have to do? (and what did I wrong?
View 7 Replies
View Related
Jan 21, 2010
i was updating my grub.cfg, by running sudo update-grub, i get a lot of errors:
[code]...
how do i make it so it can open /dev/sdf and ge it's disk size so my grub will update correctly?
View 6 Replies
View Related
Oct 22, 2009
I used the following 2 rules in iptables to forwarding some packagesiptables -t nat -A PREROUTING -p tcp --dport 8000 -j DNAT --to-destination 192.168.0.244:8000iptables -t nat -A POSTROUTING -p tcp --dport 8000 -j MASQUERADEIt works perfectly before, the kernel was 2.6.18-92.1.22.el5.After we did a update, the kernel now is 2.6.18-128.7.1.el5.and the forwarding is stop.I just wondering where can I get some debug information. I checked /var/log/message, dmesg ... seems nothing there.
View 1 Replies
View Related
Nov 18, 2009
I have installed Centos and after few days I used it as a web server, database server (MySQL) and have some very important for me applications installed.
Today - I have read about "yum -update" function and I (a dummy one...) tried it. After some minutes the process was finished. But unfortunatelly - my server did not boot any more.
As startup options I have:
CentOS (2.6.18-164.6.1.el5)
CentOS (2.6.18.-164.6.1.el5PAE)
CentOS (2.6.18-128.2.1.el5PAE)
CentOS (2.6.18-128.2.1.el5)
CentOS (2.6.18-128.1.14.el5)
CentOS (2.6.18-92.el5)
I'm not sure what are these options. Anyway - I have tried to choose every one and the result is aways the same : red Hat Nash version 5.1.19.6 starting
Then starts the clock [ok],
Then starts the "udev" [ok]
And then My screen goes to suspend mode, with the text "no signal".
The most important thing is to backup the data from the hard disk. Do I have any chance to repair this installation ?
View 5 Replies
View Related
Mar 24, 2010
Microphone used to work well, but now it does not Indicator in Gnome sound properties does not move and there is no sound in Skype.
View 2 Replies
View Related
May 19, 2010
I've patched my kernel to enable my IDE-mode SATA drivers (ata_piix.c), and everything works fine. But when I attempt to create a Driver Update Disk with this structure, it doesn't work (though the same format works for SLES11):
[Code]....
View 1 Replies
View Related
Apr 5, 2010
i have huawei usb stick modem, i'm connecting to internet with wvdial command, i have configured the file "wvdial.conf" to be able to connect, everything works fine i guess but the update applet still show me the message
Code:
Unable to check whether updates are available
connect to the internet and connection manager too .. it tell me i'm not connected, i think i must configure my connection in an other way .. but i don't know how ..
View 5 Replies
View Related
Jun 4, 2010
(Beginner)Just installed openSUZE 11.1 Dual boot with Vista. I can set up my wireless settings, wep, etc and it says it connects just fine. But when I try to USE the internet it doesn't work. Nothing in update, nothing in firefox. It says it is connected but it's acting like something is blocking it.
View 2 Replies
View Related
Jan 4, 2010
After upgrading Jaunty to Karmic internet sharing (iptables) stoped working. Nothing in iptables configuration was changed.
Code:
# iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
[code]....
View 2 Replies
View Related
Jan 3, 2011
I am working on ubuntu (Xubuntos) using VMware virtual machine. when I enter apt-get update it gives following error;
Code:
xubuntos@xubuntos-tinyos:~$ sudo apt-get update
Code:
Err http://tinyos.stanford.edu edgy Release.gpg
Cannot initiate the connection to 3127:80 (0.0.12.55). - connect (22 Invalid argument)
Err http://tinyos.stanford.edu edgy/main Translation-en_US
[Code]...
View 2 Replies
View Related
Jul 22, 2010
Update manager pops up telling me there are new updates, but clicking on the 'Install Updates' button does nothing.However, if I click on Settings, then just close the settings dialog,it then says 'Starting Update Manager' and when that finished, the 'Install Updates' will work, but I have to do this every time I restart the computer.
View 9 Replies
View Related
Jul 13, 2010
1) Installed Cent os 5.4 in my system (name it as "guest os").
2) Downloaded the full kernel source, and patched the vanilla kernel to export symbol table (2 line change) [URL] (Yes I know that kernel should not be touched, if touched you should not seek help here . but I felt I didnt do any big change in kernel there). Besides we unset the config_smp & config_preempt parameter to make the kernel as not SMP and not preemptive .
3) Then compiled and booted with the new kernel 2.6.18, everything went fine . Now my gust os box is loading fine and I dont have any issue .
So now I need to install this above machine as guest OS in one more XEN machine cent os 5.4 (name it as "xen os").
So we created the image out of the above box "guest os" and added it as VM in xen os . But while booting it always hangs under some error like "/usb device sort of thing" (I dont have the screen where it hangs, but I do have the equivalent xen log from XEN OS linked to [URL] .
1) what the error is, and what need to be changed in my guest os build .
2) In general I am new to this VM and XEN installation, to be frank I am completely zero . Does changing the native os 5.4 to guest os need any change in kernel or something.
3) Does this case possible, install plain cent os in xen machine. After then patch the kernel in VM and boot with that . I guess it should not be possible ...
4) If possible guide me to some documentation where I can learn few basics over this.
View 15 Replies
View Related
Aug 20, 2009
I am trying to monitor a Centos 5.3 box using SNMP and I am having a lot of trouble getting the data that i need from it. Everytime I try to get information from the UCD-SNMP MIB it returns "End of MIB". It is my understanding that UCD-SNMP is a standard package when Net-SNMP is installed and should always be there. Then why can't I access it? I have tried removing the reinstalling Net-SNMP, but that hasn't worked. My server is update date on all it's patches as well. It is quite old hardware, but I don't believe that should affect SNMP from being gathered. Iptables is down, and I cant' even get it from the local machine.
View 1 Replies
View Related
Apr 28, 2010
I have a dedicated server running CentOS 5, Plesk 9.2.2, SMTP Postfix and Courier-IMAP.The issue I have is that on all domains on the server receiving email works fine however sending email never seems to work. This is from email programs, my phone, webmail and PHP. None of them seem to be able to send email. If it is of worth Spam Assassin is running however I don't feel it is causing any problems.
View 7 Replies
View Related
Aug 22, 2011
I have very annoying problem with USB passthrough in Centos 6. My XLM guest file to forward USB ( I checked this manually and using virt manager) :
<hostdev mode='subsystem' type='usb' managed='yes'>
<source>
<vendor id='0x0d7a'/>
<product id='0x0001'/>
</source>
</hostdev>
[Code]...
View 4 Replies
View Related
Aug 23, 2009
I wireless network card is Broadcom Corporation BCM431, but is doesn't work after I update kernel from
2.6.29.6-217.2.7 to 2.6.29.6-217.2.8.
Linux localhost.localdomain 2.6.29.6-217.2.7.fc11.x86_64 #1 SMP Fri Aug 14 20:53:08 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
View 2 Replies
View Related
Apr 4, 2011
I updated my system from FC13 2.6.34.7-66 to 2.6.34.8-68 for both the kernel and the kmod-wl RPM's. After doing so, iwconfig wlan0 key 1234567890 no longer works. I get an error indicating 'invalid argument'. If I reboot using the previous kernel/wl.ko module, it works The size of the wl.ko module increased in size by almost 30%. Did I somehow get the wrong RPM?
View 2 Replies
View Related
Dec 1, 2009
I'm quite new to Linux and totally new to CentOS. I need it to isntall a Lotus Domino Server, and for security reason i'd like to install the Acronis Linux agent to backup this server with my Win Acronis enterprise server. I have installed a new CentOS server 5.4 on a Vmware virtual machine, then installed the Acronis Linux agent following the instruction here [URL].. The agent seems to work because with the command "/etc/init.d/acronis_agent status" the sistem respond with "Acronis Agenti is running"
But i can't connect to the agent from the server console!
I have disabled the firewall to avoid any connectin problem...
Does anybody use acronis with CentOS?
View 8 Replies
View Related
Dec 8, 2009
Is there a reason why the selinux module for nagios just doesn't work? I'm running CentOS release 5.4 (Final) and did "yum install nagios" and now have nagios-3.2.0-1.el5.rf installed. I'm having to create policy after policy after policy, and still haven't reached the end of the rainbow.
I suppose after I run out of selinux violations, I could figure out how to combine all of these modules and post the result, but it seems really, really weird to think that I'm the only person who has ever installed nagios from the repo with SELinux enabled.
View 1 Replies
View Related
