I was using windows 7. Today I installed ubuntu 10.10. After installing the normal boot option is now replaced with grub boot menu. I am able to boot ubuntu successfully using that but I am not able to go to windows 7. In the menu it's showing: windows 7(loader) /dev/sda1 whereas my windows is installed in /dev/sdb1. Also it's showing another entry for windows xp whereas I don't have windows xp at all. My CD drive is also not working therefore I am not able to run the windows 7 rescue utility. Also not sure whether it'll work or not.
I have Ubuntu 10.04 LTS and Windows XP installed on my laptop. Usually when booting, I get the GRUB 2 menu and I can boot into either Ubuntu or XP.I was playing around with EasyBCD, then after trying to remove it I was unable to boot into Windows, I used a Windows 2000 CD recovery console to fix the MBR (using: fixboot and fixmbr).Now Windows starts up when I power on, but I don't get the grub menu anymore with an Ubuntu option. If I boot from the Ubuntu Live CD and try to mount my Ubuntu partition (/dev/sda5) I get this error:
mount: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try
I had a dual boot system with 3 partitions, Windows 7 on one partition, and Windows XP on another partition and a Data partition. I decided to load Ubuntu 10.10 on the Windows XP partition.During installation I selection manual partition, and deleted Windows XP.after successful completion of Ubuntu installation "Grub" directly boots into Ubuntu, it doesn't show me the OS selection screen. After following some forum posts I did an update grub
Code:
Generating grub.cfg ... Found linux image: /boot/vmlinuz-2.6.35-22-generic Found initrd image: /boot/initrd.img-2.6.35-22-generic
Having a major issue with my laptop. I am unable to boot into my Vista installation.I am currently posting this through my Fedora 11 installation which I had already. If anyone is interested, the BSOD error is:
As far as I know, a '7B' BSOD is usually a hard disk error but I am 100% sure the HDD is fine as I can read and write from both Fedora and Knoppix without issue. Steps taken so far: Obviously, I have tried the usual steps of trying to start windows in safe mode, last good config, and all of the F8 options. When they failed, I used fedora to check for some solutions online (Mostly useless answers from MS) and I found one successful case when a person flashed his BIOS back to an earlier time. Unfortunately, I cant get the BIOS update I got from the Dell website to boot from a USB drive (Says invalid boot disc - the BIOS on it is in the .exe format which I can't use in linux) and I do not have a floppy drive on the laptop.
So, I put in my Dell drivers and utilities CD hoping that it would give me some option to update (Or roll back) the BIOS but there was no such option. However, it did give me a load of diagnostic options including repair options by symptom so went with the "Unable to boot from BIOS". Unfortunately, that didnt help me at all. So, I got my Vista installation disc (OEM supplied) and managed to get to the repair menu (Which I had among my F8 options anyway) but this also has the option to reinstall. Unfortunately, it states that "Upgrade is unavailable" and that a clean install is the only thing I can select (At the expense of my files and settings).
As for the repair options, the automatic recovery doesn't seem to find any errors, asks to reset and see if all is well (It isn't). For some reason, system restore doesn't detect any restore points. There are no windows memory errors detected and I have no backups. So, i'm left with a command prompt that, by default, is asking for a file in this folder: X:/WINDOWS/System32/ I have no idea where it is getting the X: drive from - I have C and D drives for windows only. As per another online guide, I tried:
So here is the deal, I have my wifes computer set up to dual-boot Ubuntu 9.10 and Windows 7. She uses a HP G60-445DX laptop, and something very funky is going on.
1. I first installed Windows 7, and it boots fine multiple times with no problem.
2. Next, I install Ubuntu 9.10. After installation is finished, I select reboot, and choose Windows 7. It boots fine.
3. Then, I reboot into the newly installed Ubuntu for the first time, get to the desktop, and reboot.
4. Now when I select to boot Windows 7, it gets about half-way, and suddenly reboots the computer.
I've troubleshooted this thing for days on end trying to isolate exactly what is causing Windows 7 not to boot. After reinstalling Windows 7 again, it once again boots fine, even after I use the live CD to restore Grub 2. It's only after I boot the fully installed Ubuntu 9.10 that her Windows 7 install starts acting weird. All I can narrow it down to is that after I boot into Ubuntu for the first time (after an install), Windows 7 no longer boots properly.
I'm running ubuntu for the first time. I have it install in Windows xp and boot it up after restarting the com. But I'm unable to boot up ubuntu. I can however go into the recovery failsafe mode. How should I debug the errors?
I recently installed ubuntu on my netbook (asus eee PC). The problem is, when I restarted the computer and got to the overview on what to boot and chose Windows 2000/xp/vista etc etc sda1, I am not able to boot into windows. There is just a blinking underline _ <- like that in the top left corner. And nothing happens. I cannot risk to lose my files that are on the windows partition. What can I do?
installed ubuntu on preinstalled windows7 hp notebookpc windows7 not booted. so i just use windows recovery cd and use some bootrec fixmbr commands 4 now i am unable to use both.
I was using Windows XP before. I installed Ubuntu some weeks back and removed Windows completely. Now I want to completely remove Ubuntu and install Windows XP back. But the Windows XP bootable CD won't boot. I DON'T get a screen saying, "Press any key to boot from CD.. I've changed my boot sequence under BIOS settings to CD first and then HDD. Still every time I restart with the CD, it loads Ubuntu.
i am having ubuntu 8.04. i have installed windows 7 but i am not able to boot into ubuntu 8.04. i have new version of ubuntu 9.10 in CD. does reinstalling the new ubuntu will overwrite my all previous data which i had in older version of ubuntu?
Upon trying to boot Windows I got through the GRUB startup selections and then i get stuck at a black screen displaying "Starting Up. . ." That would be no problem, I just boot ubuntu instead and mount the partition to access the programs I'm looking for. Now I get an interesting error message:
"Error mounting: mount exited with exit code 13: ntfs_mst_post_read_fixup: magic: 0x00150000 size: 4096 usa_ofs: 0 usa_count: 1040: Invalid argument Actual VCN (0x15000011d92501) of index buffer is different from expected VCN (0x1). Failed to mount '/dev/sda1': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details."
I would run chkdsk in windows if I could, but that's my problem in the first place.
I "USED" to have a dual booting pc...with Windows 7 & ubuntu 10.04.(NOT Wubi) 2 Days back my windows 7 crashed...so i had to reinstall windows 7. But after reinstallation there was no option to boot into ubuntu 10.04. My system automatically boots into windows 7. I need to fix my ubuntu installation so that i get an option to select which OS to boot...at the startup.
I am new to Ubuntu. I recently upgraded my Ubuntu from 9.10 to 10.4 (64bit) since then I am unable to dual boot to WIN2K3 from the same HDD as my Ubuntu. I have ran some of the suggestions like: Sudo update grub and Testdisk both did not provide any errors on my partitions and my primary partition displayed in Testdisk was WIN2K3, now when I reboot and select it from the boot menu it just simply show a blinking cursor.
I am out of ideas and I need a solution to suit my configuration. I prefer not to re-install or repair any WIN2K3 OS. Can someone assist and let me know what you need from me to further understand my issue.
I just installed ubuntu via the windows installer. When I try to boot it, it comes up a cmd line and gives me some choices of boot/grub... and boot/disk/... they all lead back to the cmd line except the boot/disk option which leads to a message saying that it cant find the disk...
I have two separate hard disks, one having ubuntu 10.04 and one having Windows XP. I'm unable to get an option to choose from grub menu as to which operating system i want to boot into.
I installed Redhat Linux on my Windows Vista machine. I am unable to boot my windows vista now.The error that i get when i select the option (other) when booting my machine. 'Other' refers to my Windows vista. I am able to successfully boot my linuxBooting 'Other'rootnoverify (hd0,1)chainloader +1Error 13: Invalid or unsupported executable format
grub> geometry (hd0,1) drive 0x88: C/H/S = 1023/255/63, The number of sectors=390721968, LBA Partition num: 0, Filesystem type unknown, partition type 0x27
I upgraded from grub to grub2 recently, and during an update of my system, it ran the update-grub command which prompted a window asking me where to install Grub. Since I didn't know what partition to install it to and the help suggested to install it to all if I was unsure what partition to install it to - I accidentally installed Grub to my Windows partitions (both the regular and the recovery console).
So now, I can't boot into Windows - the computer just hangs after Grub with a blinking cursor and I have to perform a hard reset. Is there any way for me to restore the boot record for the windows partition without having to reinstall windows from the ground up?! I can't use Linux for my webbanking and other important tasks, so (unfortunately) I need Windows back desperately!
got a lenovo B50-30 (no touchscreen) that came preeinstalled with windows 8. after installing debian im unable to boot windows , im not too great with grub configuration.this is what i suspect is the menu entry for windows in the grub boot menu .
Code: Select all### BEGIN /etc/grub.d/30_otheros ### # This entry automatically added by the Debian installer for a non-linux OS # on /dev/sda3 menuentry "Windows Vista (loader)" { set root=(hostdisk//dev/sda,gpt3) search --no-floppy --fs-uuid --set=root 8CA2-D25B chainloader +1 }
here is info about the partition table (ive alocated / and swap part for debian nothing else. )
i got a problem in my laptop so i moved the hdd from a laptop to another one like it slack worked but win 7 didn't so i booted slack moved my files from the windows partition to the slack one the i formated the windows sector now i can't go to the Slackware and boot it and i have my files in the /home/root/Desktop so i did try to boot a live cd but i can't access to this file.
I recently performed a reinstall of ubuntu after mucking up my partitions, and I am running it dual booted with windows 7.
I recently performed a grub-pc update, but I didn't know what it was asking me to do during the process itself of updating the process.
It asked me at one point where to install grub, and I selected all my partitions because it suggested that if I didn't know. I think that may have damaged my windows section, which was also selection.
I've attached the output for:
Code:
Problem symptoms:
1) Weird upgrade error in apt-get 2) Unable to boot windows 7 3) Unable to activate proprietary drivers 4) Perpetually being reminded to restart
yestoday,after I upgrade,unable to boot windows xp. if I use grub ,windows xp can boot up.but now I want to use grub2, boot info script's results.txt is at below.
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary: => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #6 for /boot/grub. sda1: File system: vfat Boot sector type: Fat16 Boot sector info: No errors found in the Boot Parameter Block.
I have recently purchased a new laptop, which came with Windows 7 pre-installed. I immediately installed Ubuntu alongside it with a dual boot. At first it worked fine, but when I restarted after the first time I used Windows, I ended up with an 'Operating system not found' error. I was able to reinstall the Grub bootloader using an Ubuntu Live CD, which appeared to fix the problem, but the next time I loaded Windows 7 and rebooted, the problem reappeared I think the problem is that Windows 7, for whatever reason, is somehow removing or disabling Grub.
Two days ago i turned on my pc and suddenly there was a message:"Minimal Bash-like line editing is supported.For the first word,TAB lists possible command completions.Anywhere else TAB lists the possible completions of a device/filename.ESC any time exists...
When i googled this message it came out that this has got to do with linux (i have never used linux and i formated my disc once or twice since i bought it so i found it very strange that this problem is related to linux).Anyway,i found out that grub is the problem and that it isnt a big deal to solve it.I downloaded Ubuntu,booted it from the cd and followed the instructions...I typed in grub (in the terminal) and it told me to download it so i typed in "get-apt grub install" or something like that and it all went well,i was now in the grub directory.Then i typed " find /boot/grub/stage1" and it told me that the file was not found.
I have tried everything,i have downloaded the super rescue cd the fix the problem but i have still the same problem.
I am unable to load Ubuntu onto computer as dual boot or inside windows. Thus scanned the CD and found it has 23 errors.Are these files suppose to be on the CD?casper, .disk, install, install, isolinux, pics, pool, pressed, autorun, md5sum.
A few days ago I went to perform the Service Pack 1 Upgrade for Win 7. This crashed out with an error. On researching the problem I found a solution to fix the problem by marking the Windows partition as active. I did this (via Computer Mgmt -> Disk Mgmt). This allowed the SP1 upgrade to work, however on reboot I got an error BOOTMGR missing. This I rather rashly resolved by using the Windows 7 install DVD in Recovery mode to reinstall the Windows Boot manager via bootrec /Fixboot I thought I would then be able to use the Opensuse 11.2 install disk to fix grub.
I use the Opensuse install disk and select Repair system -> Expert Mode -> Install New Boot Loader then select Other -> Reread Configuration from Disk. This adds Win 7 back into the grub menu. I then select OK and get the message "the bootloader was installed successfully". The problem then comes when I click my way through OK and Next to finish the install. At the end of the process I get the message "An error occurred during the installation" and I'm no further forward.
FYI the PC has a single SATA disk installed partitioned as follows:
dev/sda1 100Mb Win System Parkition dev/sda2 Windows NTFS dev/sda3 Windows FAT
I've Got one Problem with My Computer soon after success installation of when the boot-loader ask me to choose OS at CENTOS 5.4, multi boot boot-loader if i choose windows then computer tries to boot windows but fail and give the error message that there is a problem on reading the hard disk, But when i restart it and start with LINUX then computer start successful with no error message, now i do not know what to do cause i need to use Windows and all my programs are in windows..
I downloaded Ubuntu 10.04 and I want to make a dual boot with Windows 7 Ultimate using Windows Boot Manager... I deleted my last Ubuntu OS (9.10) just because of GRUB
Last week I installed Ubuntu 10.10 on my system in dual booting. I had installed succesfully both but unable to see data files from windows OS. Though I have excercised the options in various resources available on internet/blogs. System takes about 03 hrs during installation process. I am also unable to configure Thunderbird.
System hardware info is as - System ManufacturerVIA Technologies, Inc. System ModelKM266APro-835 System TypeX86-based PC
I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code: Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ==============================[code].....
