i got a problem in my laptop so i moved the hdd from a laptop to another one like it slack worked but win 7 didn't so i booted slack moved my files from the windows partition to the slack one the i formated the windows sector now i can't go to the Slackware and boot it and i have my files in the /home/root/Desktop so i did try to boot a live cd but i can't access to this file.
View 1 Repliesi have windows xp and federo installed on my system on seperate partition and using grub loader for dual boot. Unfortunately am unable to boot the windows and it hangs with the blue screen and with safe mode it stops at mup.sys and doesnt proceed further.I tried booting with a windows xp CD but it looks like it is unable to recognize the disk even if i say boot with a CD in BIOS settings. Does anybody knows how to make the CD recognizable so that i can go into the windows repair mode.
View 9 Replies View Relatedfor some reason Win7 has gone and run a startup repair (there was two boot options in GRUB, perhaps I chose the wrong one by accident) which has corrupted my GRUB. Now, the only way I can get anything to run is by booting Ubuntu of a live-pendrive/flashdrive! I tried following a couple of walkthroughs that claimed to fix the problem; and I don't doubt that they work - on someone elses computer! I receive errors whenever I try to use things like 'sudo grub' and often (but not always) with 'mkdir' and 'mount' - and I have very little idea what some of them are doing (I gather 'mkdir' is making a directory and 'mount' is mounting a device virtually, but some others are a little harder to guess)
So, I am wondering if someone has a little insight as to how I can fix this and perhaps point me in the correct direction to learning about making my way around ubuntu and these fancy terminal commands! Currently, I am at the stage where I can boot into my flash drive by spamming escape before the bootloader. However, when GRUB loads it tells me there is an error and gives me a command line; through which I have been unable to get anything to happen. I am running Ubuntu 10.10, I believe, and Windows 7 on the same hard-disk and possibly the same partition (though, I am unsure of how Ubuntu works itself into partition's). I also ran a little code (seemed somewhat like a batchfile in windows) that made a txt file of my boot info; I'm attaching it below if that helps at all. Boot Info Results:
[Code]......
I have a windows XP Pro machine and also a Server running ubuntu, the server was built for me and the builder is no longer available for consultation. The server drives which were on my desktop beside my C drive were working flawlessly allowing me access until windows started running quite badly which meant I had to reinstall it. After the reinstall I could not see the drives displayed and I am unable to access them from windows. And also not able to mount them. The server has not been switched off at any time and does not even have a monitor or keyboard or mouse. I have not done anything to change any settings to it. I have zero knowledge of the system. My windows administrator password is exactly the same I have looked on the server and my files are intact I just cant access them from windows which I need to do.
I got the following details off the server:
KERNAL LINUX 2.6.27.5 - 117. fc10.i686
GNOME 2.24.1
MEMORY 881.4 MiB
Processor AMD LE 1620
Samba Server Version 3.2.4-0 fc10
I was told the drives should appear on their own but that's not happening I am not able to sight them at all file sharing and printer sharing is enabled.
i have a dual-boot system running with Fedora 11 and (formerly) windows XP. The windows xp has become unbootable, and i installed Fedora on a separate partition so i could run the computer. is there a way i can reinstall windows XP to the other partition using Fedora 11?
Note: The reason i installed fedora Is because i dont have a Windows XP Boot cd, and i believe there is a backup somewhere on the hard drive.
How will I go about getting the linux Dual boot screen back
ubuntu 10.10 desktop
Win XP H.E.
I need windows because iscan under Ubuntu does not work well. So I have a dual boot. Trouble is that windows is only good for a month because I can't validate it because I have it on another machine also.
So, my month is up and I can not longer access windows. I could do a complete wipe and reinstall windows and then put Ubuntu next to it but that is a lot of work. Can I just reinstall windows and get my boot loader to operate properly again? Or is it actually easier to do a total wipe out and reinstall? I have tried to restore grub before and I failed miserably.
I have a new Dell Inspiron 1545 with a dual-boot setup: Kubuntu and Windows 7. A long, tedious story made short, I have Kubuntu working but cannot for the life of me get the wireless adapter to work in Windows 7. Since the Microsoft universal fix consists of reinstalling the OS, that's what I plan to do.
That said, I'm concerned that Windows will not just reinstall itself, but wipe out the boot record used by grub. I've invested enough time setting up Kubuntu that I really don't want to start from scratch (again) with both OSs.
How to reinstall Windows without wiping the boot record? If not (i.e. Windows will kill whatever grub has in place), is there a way to use the Kubuntu disc, or another linux disc, to reinstall grub afterward, thereby leaving the linux partitions intact?
I need to reinstall Ubuntu 10.10 on my PC. Previously (first time installation), was from Ubuntu Desktop LiveCD using USB. I installed Ubuntu on different drive. I didn't make any swap-drive before (I just know about it). Also, I upgraded to Ubuntu Studio manually from terminal. It was my first time, and i did a quite little mess with my current installation during the course of learning sudo and setting up for audio related works.
The problem I have now,
1. No sound from the speaker (after replacing ALSA with OSS4, which was success, and trying to get back to ALSA, which was not)
2. I missed that speaker icon on default setting of Ubuntu Studio Desktop theme. It supposed to be on top-right of the panel. That icon also contains sub-menu to "Rhythmbox" and "Volume Setting".
3. I think I made a lot of sudo apt-get install and compiling from tar, I think I downloaded many unnecessary dependency files, which I'm not using it.
4. I downloaded and install complete Ubuntu Studio audio/video/graphic package. After trying all the stuff inside, I found out that i didn't need all of them. I decide to remove the package and just get necessary software that I need to use. However, I failed to remove the package using "sudo apt-get remove ubuntustudio-etc" I can't remember what I did during the course of sudo-ing things.
I just want a fresh new install of Ubuntu Desktop, and build from grown up again, and keep the Ubuntu Studio desktop theme on top of it. I did made a little Google and find out about GParted and Super Grub Disk. What I had in mind is,
1. boot to Gparted using USB,
2. delete/clean the drive where I installed Ubuntu
3. reboot to Super Grub Disk from other USB, to fix mbr things,
4. reboot to Windows,
5. reformat the drive I've installed Ubuntu before
6. re-install fresh copy of Ubuntu again.
However I failed to boot to Gparted as per instruction on their website. I did try clicking the makeboot.bat from the USB while I was on Windows, and I still got boot error. I don't know how to Gparted from Ubuntu. I had the Gparted package installed but I get this line :
Code:
Inhibit all polling failed: Only uid 0 is authorized to inhibit the daemon
If there is a better way to do this, rather than going through GParted and SGD to fix mbr. Again, it was my first time on Ubuntu, I just want a fresh new install of Ubuntu Desktop, and build from grown up again and keep the Ubuntu Studio desktop theme on top of it.
My old-ish Dell laptop is currently running Windows 2000 and Ubuntu 9.10. I originally installed 2000 to try and squeeze a bit more performance out of the laptop for general use, but in practise Ubuntu is running great and sees far more use than the Win2K installation so I've decided to create a stripped-down (i.e. non-networked) XP installation purely to run a few favourite audio applications.
I plan to do a fresh Windows install and wipe the current C: partition. Is there anything I should be aware of in terms of the GRUB bootloader. Will it simply recognise the new XP installation? Obviously I will back up my data before I continue, but are there any other precautions to take with respect to dual-booting? I could do without having to reinstall Ubuntu too!
I installed Ubuntu a while ago now and I like it but when I installed it I removed windows and now its starting to annoy me. I cannot sync my ipod touch, I can't play some of my games because they are all meant for windows and wine does not work for then so what I want to do is uninstall ubuntu and reinstall windows xp, then I will reinstall ubuntu and this time around I will make a dual boot. Only one problem, I don't know how to uninstall ubuntu.
View 9 Replies View RelatedI recently installed opensuse 11.2 on my laptop which also had windows vista and windows 7, i created a new partition and the installation went smoothly, after i went to boot back into windows 7 i got a blue screen of death, strangely vista boots perfectly.I could just reinstall windows 7 but its a pain to reinstall all my programs and such
View 6 Replies View Relatedive got a windows partition and a ubuntu-10.10 partition. i just tried to reinstall windows on the first one - but things didn't work out properly. after the first restart the pc just hung in the first boot screen - it wouldn't boot from the windows cd or the harddrive. every time i restart the computer it just hangs in that screen. i can't even choose to boot from cd/usb to use a livecd and rescue my files on the ubuntu partition. its like the keyboard doesn't work anymore. ive tried both a usb keyboard and one of the old kind with the prongs. so i cant get into ubuntu.
here's the screen, it pops up a second after i restart. usually the pc just boots up a couple seconds later and i can choose beteen win/unbuntu; or i can just press 'esc' and choose to boot from usb. but now nothing is happening, the keyboard doesn't seem to work, and it wont go passed this screen.*edit* actually the keyboard is working, because ctrl-alt-del restarts the computer, but thats about it..
I've a multiboot machine and I recently installed Slackware64-13.1 on sda33. I added menu entry in SUSE boot loader and configured menu list as per [URL].. it returns GrUB error 15. Here is my menu list entry for Slackware -
Code:
###Don't change this comment - YaST2 identifier: Original name: other###
title Slackware64-13.1
root (hd0,32)
kernel /boot/vmlinuz root=/dev/sda33 ro hdd=scsi
savedefault
[Code]...
I installed Slackware 13.1 and Windows server 2008, I also installed LILO in MBR, I Found I can boot into slackware, but can't boot into Server 2008. then I　use command bootsect/fixmbr. now I can boot into server 2008, but the problem is I can't boot into slackware. I try to install lilo to supper sector. it's not works. I only can boot my slackware by a USB stick.who can help me to solve this problem? I really need these two systems.
View 5 Replies View RelatedMy new job requires I use Windows and as such I put a second HDD in my laptop for the purposes of Window/Work The issue is that Windows will not install on this second disc (Windows cannot create partition or install to disc). I got around this by installing Windows to the first disc, then the second then putting Slackware back on the first but then I suffer the "Bootmgr cannot be found, press ctrl + alt + delete to restart".
I am using Lilo and I have never really had an issue dual booting them on the same disc (Admittedly over a year ago) but it is of the utmost important I have them on separate Discs. Has anyone encountered this and/or know a way around?
So I got slackware 13 from the website and created 4 partitions (primary) and left some (100GB) space as I planned to install windows 7 in that. After installing slack, when I booted from windows DVD (rtm) in partition section it said I already have 4 primary partition so windows cannot used the rest of space despite the fact that it was free (windows even grayed all options like new partition and format etc. for that space). So I thought I'd create 2-3 primary partition for linux (slackware) so that windows can use the free space and make it a primary partition.
So, Next I formatted with slack (3 partition, 2 Primary, 1 extended, total space for slack 50GB) and after its installation I worked my way with windows, but it just created one partition of 100Gb, won't let me create any saying all primary partitions are created. Anyway, I created that partition and installed windows 7. But it messed up my lilo (slack won't show in boot menu) neither can I create any new partition.
After all I reformatted again created 2 partitions for windows (that actually became 3 as windows 7 create 100Mb separate partition for system). Installed windows correctly. Then I booted with slack , which allowed only creating 1 partition as 3 were already there. So I created 1 extended partition, in which I created 4 partition 1 to mount for /boot (100M), 1 for /swap (3G), 1 for home (10G), 1 for / (35G) everything worked fine till I reached last point to install lilo. At that point it said cannot install Lilo (I tried all options simple, expert, install to MBR etc.) but it just won't install. Anyway, after that it said you can install it manually so I clicked OK. Then it said setup complete, remove disk and press alt+ctrl+del to reboot, which I did. But there is just windows 7, no slack ?
I have Ubuntu 10.04 LTS and Windows XP installed on my laptop. Usually when booting, I get the GRUB 2 menu and I can boot into either Ubuntu or XP.I was playing around with EasyBCD, then after trying to remove it I was unable to boot into Windows, I used a Windows 2000 CD recovery console to fix the MBR (using: fixboot and fixmbr).Now Windows starts up when I power on, but I don't get the grub menu anymore with an Ubuntu option. If I boot from the Ubuntu Live CD and try to mount my Ubuntu partition (/dev/sda5) I get this error:
mount: wrong fs type, bad option, bad superblock on /dev/sda5,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
[code]....
Having a major issue with my laptop. I am unable to boot into my Vista installation.I am currently posting this through my Fedora 11 installation which I had already. If anyone is interested, the BSOD error is:
0x0000007B (0x80399BB0, 0xC0000034, 0x00000000, 0x00000000)
As far as I know, a '7B' BSOD is usually a hard disk error but I am 100% sure the HDD is fine as I can read and write from both Fedora and Knoppix without issue. Steps taken so far: Obviously, I have tried the usual steps of trying to start windows in safe mode, last good config, and all of the F8 options. When they failed, I used fedora to check for some solutions online (Mostly useless answers from MS) and I found one successful case when a person flashed his BIOS back to an earlier time. Unfortunately, I cant get the BIOS update I got from the Dell website to boot from a USB drive (Says invalid boot disc - the BIOS on it is in the .exe format which I can't use in linux) and I do not have a floppy drive on the laptop.
So, I put in my Dell drivers and utilities CD hoping that it would give me some option to update (Or roll back) the BIOS but there was no such option. However, it did give me a load of diagnostic options including repair options by symptom so went with the "Unable to boot from BIOS". Unfortunately, that didnt help me at all. So, I got my Vista installation disc (OEM supplied) and managed to get to the repair menu (Which I had among my F8 options anyway) but this also has the option to reinstall. Unfortunately, it states that "Upgrade is unavailable" and that a clean install is the only thing I can select (At the expense of my files and settings).
As for the repair options, the automatic recovery doesn't seem to find any errors, asks to reset and see if all is well (It isn't). For some reason, system restore doesn't detect any restore points. There are no windows memory errors detected and I have no backups. So, i'm left with a command prompt that, by default, is asking for a file in this folder: X:/WINDOWS/System32/ I have no idea where it is getting the X: drive from - I have C and D drives for windows only. As per another online guide, I tried:
[Code]....
I had a dual boot system with 3 partitions, Windows 7 on one partition, and Windows XP on another partition and a Data partition. I decided to load Ubuntu 10.10 on the Windows XP partition.During installation I selection manual partition, and deleted Windows XP.after successful completion of Ubuntu installation "Grub" directly boots into Ubuntu, it doesn't show me the OS selection screen. After following some forum posts I did an update grub
Code:
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-2.6.35-22-generic
Found initrd image: /boot/initrd.img-2.6.35-22-generic
[code]....
I am a slackware 13.1 user , and for the first time today I tried to use slackpkg to update my chromium ( I did everything by hand before ), but unfortunately it did something .... while it was prompting everything it was doing , I saw it removing all my main utilities such as exec, grep, sh .... After the operation completed , I was unable to run anything , everything I clicked on generated the message ( I dont actually remember clearly ) KDE/init/ ' unable to open terminal' Now that I rebooted my system , I get the following error :
++ Kernel Panic - Not syncing : no init found , Try passing init = option to kernel.
Ive looked up some forums and the ways they suggest does not work.
I had a perfectly working basic 13.0 install on hda4; I installed 13.1 on hda1 and added lilo with an entry for each using expert mode during setup but now neither will boot from this lilo (both try but fail along the way; 13.0 comes up with some errors about sda and 13.1 screen turns black and does nothing) During the 13.0 startup it seemed to use the 13.1 kernel as there was a penguin in the top left instead of the "cat wearing a mask" image that usually shows when it boots.
I think 13.1 installed perfectly and the screen going black is another issue (I don't know why I think that but I just feel it did, it gets further along in boot up)I've managed to get 13.0 back up and bootable by chrooting in and reinstalling lilo but strangely I had to go into its lilo.conf and change sda4 back to hda4 (before this install it had been hda4 and I can't understand why it had changed) I'm running an advent 7101 laptop and have had 12.2 and 13.0 dual booting previously.
I am actually facing a vague problem here. I was previously running Windows XP and Ubuntu . Ubuntu was installed Windows XP The problem is
1. First I tried to do some disk partitioning. That ended up with some error.
2. Ignoring that, I went to install Windows 7 over Windows XP but I was not able to proceed with Windows 7 , because the partitions were corrupted.
3. So I used Ubuntu LIVE CD (Grub was lost at this point )and used 'testdisk' and recovered the partitions.
4. Now installed the Windows 7 successfully.
5. Now again I moved to Ubuntu Live CD to write the GRUB. After which I tried restarting
6. Now Ubuntu is booting perfectly as before. But the problem is with Windows
7. The GRUB loader instead of showing Windows 7, it shows Windows XP !!! . and there is no other entry for windows. When I tried opening it, it says "error, cant read file" and further inout moves back to the grub loader list again.
"How do I change the entry to Windows 7 from Windows XP and boot Windows7 successfully " I tried it a couple of times, same thing happens . So how to change the entry?
I downloaded NetSecL today to try it out and see what it contains. At first I tried installing it to USB, which after reboot gave me a kernel panic. So I tried installing to my spare laptop, dedicated for testing. Installation went flawless, no errors whatsoever, but when I rebooted the strangest thing happened.
Half of my screen was filled with 07 07 07 and nothing else. No errors on screen, nothing. Not even the LILO boot screen, which I got when booting from USB (just before the kernel panic).
I've used this particular laptop (HP Compaq NX7010) lots of times with a variety of OS and LiveCD, just to try and test, and never have I seen this before.
what this strange behaviour is? I tried installing another OS but got the same behaviour, so I booted from GParted LiveCD, formatted the disk and created a new partition table. After that I was able to install whatever OS I wanted (except the NetSecL).
menuentry "Windows 7 (loader) (on /dev/sda1)" {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 3850d16450d12980
chainloader +1
}
This is automatically generated after installed ubuntu 10.10. It shows black screen with a flashing cursor after press enter.
Grub 0.97 also does this with:
title win7
fallback 2
find --set-root --ignore-floppies /bootmgr
chainloader /bootmgr
savedefault --wait=2
But the weird thing is my usb stick can boot windows 7 successfully with the same configuration. Whats wrong with that? How can I do with grub.cfg?
I never tried Slackware and is curious about it.Have some questions to ask:
1)can it dual boot with windows 7? It uses Grub bootloader?
2)does it have MP3 and flashplayer plugins? It has Amarok?
3)does it have Qt compiler?
4) does it play DVD movies? Blue ray?
5) does it support USB 3.0 ?
Sometimes, when I need to affect some quick changes on my box, I boot up in runlevel 1 by adding "single" to my kernel line in the Grub menu. I use Grub because I also have Vista+RHEL+CentOS for operational reasons and then Slack for everything else.Since I upgraded to Slack13 I noticed that this was not working. I assumed that it was because I had installed on a encrypted LV, so I tried it on VirtualBox installs. I tried both on GRUB and LILO on the Virtual Slack. I tried both the 32 and 64 bit versions. It does not work.
View 10 Replies View RelatedI haven't used Slackware before but I used Ubuntu which I dual-booted with Windows XP.
Now I want to dual-boot Windows XP with Slackware. How do I install Slackware on top of my Windows?
My laptop is a ThinkPad my Windows is XP Pro SP3.
I was using windows 7. Today I installed ubuntu 10.10. After installing the normal boot option is now replaced with grub boot menu. I am able to boot ubuntu successfully using that but I am not able to go to windows 7. In the menu it's showing: windows 7(loader) /dev/sda1 whereas my windows is installed in /dev/sdb1. Also it's showing another entry for windows xp whereas I don't have windows xp at all. My CD drive is also not working therefore I am not able to run the windows 7 rescue utility. Also not sure whether it'll work or not.
View 9 Replies View RelatedI installed Redhat Linux on my Windows Vista machine. I am unable to boot my windows vista now.The error that i get when i select the option (other) when booting my machine. 'Other' refers to my Windows vista. I am able to successfully boot my linuxBooting 'Other'rootnoverify (hd0,1)chainloader +1Error 13: Invalid or unsupported executable format
grub> geometry (hd0,1)
drive 0x88: C/H/S = 1023/255/63, The number of sectors=390721968, LBA
Partition num: 0, Filesystem type unknown, partition type 0x27
[code]....