Ubuntu Installation :: Unable To Boot 10.04 After Windows 7 Reinstallation
May 10, 2010
I "USED" to have a dual booting pc...with Windows 7 & ubuntu 10.04.(NOT Wubi) 2 Days back my windows 7 crashed...so i had to reinstall windows 7. But after reinstallation there was no option to boot into ubuntu 10.04. My system automatically boots into windows 7. I need to fix my ubuntu installation so that i get an option to select which OS to boot...at the startup.
had a dual boot system with openSuse 11.1 and Windows XP working OK - Linux boot loader was where OS selection was made (openSuse was installed after Windows) Last week I had to reinstall Windows and this removed the Linux loader from MBR and Windows booted automatically. I wanted the Linux boot loader back,checked the threads about boot loader restoration and did the following:
- downloaded Knoppix 6.2.1 ISO and burned to CD - booted with CD - opened terminal with root privileges and typed: grub (ENTER) grub> find /boot/grub/stage1 (ENTER) > (hd0,2) grub> root (hd0,2) (ENTER) >Filesystem type is ext2fs, partition type 0x83 grub> setup (hd0) (ENTER)
setup was successful (no error messages)
Now when booting, i have an error that root (0,3) can not be mounted and "Press any key to continue"??? When hitting any key I see that there is GRUB there with all entries as in original state (Suse 11.1 and Windows) but only Windows can be booted. Then I downloaded live eval of openSuse 11.1 and did the same (booted from CD and run same commands from terminal as root) - again no errors but still "root (0,3)" can not be mounted..
I can not boot into F9 after the reinstallation of Window XP. So I booted from the F9 live cd and tried to repair the grub. Here is what I did in the terminal:
Code: [fedora@localhost ~]$ grub bash: grub: command not found [fedora@localhost ~]$ whereis grub grub: /sbin/grub /usr/share/grub /usr/share/man/man8/grub.8.gz [fedora@localhost ~]$ su [root@localhost fedora]# /sbin/grub
I have Ubuntu 10.04 LTS and Windows XP installed on my laptop. Usually when booting, I get the GRUB 2 menu and I can boot into either Ubuntu or XP.I was playing around with EasyBCD, then after trying to remove it I was unable to boot into Windows, I used a Windows 2000 CD recovery console to fix the MBR (using: fixboot and fixmbr).Now Windows starts up when I power on, but I don't get the grub menu anymore with an Ubuntu option. If I boot from the Ubuntu Live CD and try to mount my Ubuntu partition (/dev/sda5) I get this error:
mount: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try
Having a major issue with my laptop. I am unable to boot into my Vista installation.I am currently posting this through my Fedora 11 installation which I had already. If anyone is interested, the BSOD error is:
As far as I know, a '7B' BSOD is usually a hard disk error but I am 100% sure the HDD is fine as I can read and write from both Fedora and Knoppix without issue. Steps taken so far: Obviously, I have tried the usual steps of trying to start windows in safe mode, last good config, and all of the F8 options. When they failed, I used fedora to check for some solutions online (Mostly useless answers from MS) and I found one successful case when a person flashed his BIOS back to an earlier time. Unfortunately, I cant get the BIOS update I got from the Dell website to boot from a USB drive (Says invalid boot disc - the BIOS on it is in the .exe format which I can't use in linux) and I do not have a floppy drive on the laptop.
So, I put in my Dell drivers and utilities CD hoping that it would give me some option to update (Or roll back) the BIOS but there was no such option. However, it did give me a load of diagnostic options including repair options by symptom so went with the "Unable to boot from BIOS". Unfortunately, that didnt help me at all. So, I got my Vista installation disc (OEM supplied) and managed to get to the repair menu (Which I had among my F8 options anyway) but this also has the option to reinstall. Unfortunately, it states that "Upgrade is unavailable" and that a clean install is the only thing I can select (At the expense of my files and settings).
As for the repair options, the automatic recovery doesn't seem to find any errors, asks to reset and see if all is well (It isn't). For some reason, system restore doesn't detect any restore points. There are no windows memory errors detected and I have no backups. So, i'm left with a command prompt that, by default, is asking for a file in this folder: X:/WINDOWS/System32/ I have no idea where it is getting the X: drive from - I have C and D drives for windows only. As per another online guide, I tried:
I purchased a Windows 7 upgrade for my PC and plan to do a clean install of 7. I currently dual boot Windows Vista and Ubuntu. I understand when I run the upgrade, it will replace the GRUB Bootloader (Ubuntu Bootloader) with the Windoes Bootloader, when this happens, I won't be able to get back into Ubuntu. How can I correct this issue and reinstall the GRUB Bootloader?
I'm running ubuntu for the first time. I have it install in Windows xp and boot it up after restarting the com. But I'm unable to boot up ubuntu. I can however go into the recovery failsafe mode. How should I debug the errors?
installed ubuntu on preinstalled windows7 hp notebookpc windows7 not booted. so i just use windows recovery cd and use some bootrec fixmbr commands 4 now i am unable to use both.
I was using Windows XP before. I installed Ubuntu some weeks back and removed Windows completely. Now I want to completely remove Ubuntu and install Windows XP back. But the Windows XP bootable CD won't boot. I DON'T get a screen saying, "Press any key to boot from CD.. I've changed my boot sequence under BIOS settings to CD first and then HDD. Still every time I restart with the CD, it loads Ubuntu.
I am new to Ubuntu. I recently upgraded my Ubuntu from 9.10 to 10.4 (64bit) since then I am unable to dual boot to WIN2K3 from the same HDD as my Ubuntu. I have ran some of the suggestions like: Sudo update grub and Testdisk both did not provide any errors on my partitions and my primary partition displayed in Testdisk was WIN2K3, now when I reboot and select it from the boot menu it just simply show a blinking cursor.
I am out of ideas and I need a solution to suit my configuration. I prefer not to re-install or repair any WIN2K3 OS. Can someone assist and let me know what you need from me to further understand my issue.
I just installed ubuntu via the windows installer. When I try to boot it, it comes up a cmd line and gives me some choices of boot/grub... and boot/disk/... they all lead back to the cmd line except the boot/disk option which leads to a message saying that it cant find the disk...
I have two separate hard disks, one having ubuntu 10.04 and one having Windows XP. I'm unable to get an option to choose from grub menu as to which operating system i want to boot into.
got a lenovo B50-30 (no touchscreen) that came preeinstalled with windows 8. after installing debian im unable to boot windows , im not too great with grub configuration.this is what i suspect is the menu entry for windows in the grub boot menu .
Code: Select all### BEGIN /etc/grub.d/30_otheros ### # This entry automatically added by the Debian installer for a non-linux OS # on /dev/sda3 menuentry "Windows Vista (loader)" { set root=(hostdisk//dev/sda,gpt3) search --no-floppy --fs-uuid --set=root 8CA2-D25B chainloader +1 }
here is info about the partition table (ive alocated / and swap part for debian nothing else. )
I upgraded from grub to grub2 recently, and during an update of my system, it ran the update-grub command which prompted a window asking me where to install Grub. Since I didn't know what partition to install it to and the help suggested to install it to all if I was unsure what partition to install it to - I accidentally installed Grub to my Windows partitions (both the regular and the recovery console).
So now, I can't boot into Windows - the computer just hangs after Grub with a blinking cursor and I have to perform a hard reset. Is there any way for me to restore the boot record for the windows partition without having to reinstall windows from the ground up?! I can't use Linux for my webbanking and other important tasks, so (unfortunately) I need Windows back desperately!
I recently performed a reinstall of ubuntu after mucking up my partitions, and I am running it dual booted with windows 7.
I recently performed a grub-pc update, but I didn't know what it was asking me to do during the process itself of updating the process.
It asked me at one point where to install grub, and I selected all my partitions because it suggested that if I didn't know. I think that may have damaged my windows section, which was also selection.
I've attached the output for:
Code:
Problem symptoms:
1) Weird upgrade error in apt-get 2) Unable to boot windows 7 3) Unable to activate proprietary drivers 4) Perpetually being reminded to restart
yestoday,after I upgrade,unable to boot windows xp. if I use grub ,windows xp can boot up.but now I want to use grub2, boot info script's results.txt is at below.
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary: => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #6 for /boot/grub. sda1: File system: vfat Boot sector type: Fat16 Boot sector info: No errors found in the Boot Parameter Block.
I have Windows 7 and openSuse on my Acer Aspira 5532. I find that after using it, I'd rather get rid of Windows 7 all together. However, I want to be careful not to remove the partition that has the Windows 7 Reinstallation boot disk just incase in the future I wish to go back to Windows. Is there a way I can make my entire computer Linux (no dual boot) but also not deleting the Windows 7 reinstallation partition?
Further, can someone example why, on Boot, I have like 5 options to choose from? Like two openSUSE versions, failsafe, Windows 1, and Windows 2....? To be honest, when I installed openSUSE, I just did the recommended partition job that it suggested. I don't know much about partitions.
I am unable to load Ubuntu onto computer as dual boot or inside windows. Thus scanned the CD and found it has 23 errors.Are these files suppose to be on the CD?casper, .disk, install, install, isolinux, pics, pool, pressed, autorun, md5sum.
I installed Ubuntu Lucid Lynx a while ago. but then upgraded it to 10.10
I don't have the CD with me right now and i need to fix some mistakes of mine (being a n00b to ubuntu) urgently i.e. i can't wait for morning. Is there anyway i can rollback to the time when my ubuntu installation was in mint condition?
One more thing. Let me tell you my mistake. Almost a month ago i installed Apache2 on my Laptop (for LAMP). and now i have to install Apache Tomcat for JSP development. but the problem is that the files made by Apache2 and the PHP5 installation i made are not removed with
Code:
Code:
So now the apache2 files are superseding the Apache Tomcat. hence i cannot distuinguish between apache2 or apache tomcat when i goto:
Code:
So if anyone has a way of ridding my laptop of this disease without complete overhaul, please post your replies here.
Until then, I will have to defect back to Windows.
I'm using ubuntu 10.04 and it seems that I forgot to set up a swap partition when I installed my system. So, I can't install hibernate, and I don't think I have any virtual memory any more.
I know that I can always set up a swap file to play the same role, but since swap file is not contiguously stored on hard disk, the performance is expected to be worse than a swap partition.
So, how can I add a swap partition and make my system boot with it every time from now on? I have unused space on my hard disk, and re-installation is NOT an option.
Regarding dual boot and GRUB. Here is my situation: Year ago I bought computer i7-920 6G one HDD, I installed windows 7 on it. than I bought second HDD, placed it into master 2 position and installed ubuntu on it. after installation of ubuntu I got GRUB loader as first thing when I start computer (I don't remember the particular settings during installation) So far so good now is the question - is GRUB on the first or on the second HDD? can I swap both harddrives so the ubuntu one will be in master 1 position? I'm asking because my windows 7 is now wrecked (can't even get it to safe mode) and I need to clean the first HDD and reinstall windows.
I had a dual boot system with 3 partitions, Windows 7 on one partition, and Windows XP on another partition and a Data partition. I decided to load Ubuntu 10.10 on the Windows XP partition.During installation I selection manual partition, and deleted Windows XP.after successful completion of Ubuntu installation "Grub" directly boots into Ubuntu, it doesn't show me the OS selection screen. After following some forum posts I did an update grub
Code:
Generating grub.cfg ... Found linux image: /boot/vmlinuz-2.6.35-22-generic Found initrd image: /boot/initrd.img-2.6.35-22-generic
Last week I installed Ubuntu 10.10 on my system in dual booting. I had installed succesfully both but unable to see data files from windows OS. Though I have excercised the options in various resources available on internet/blogs. System takes about 03 hrs during installation process. I am also unable to configure Thunderbird.
System hardware info is as - System ManufacturerVIA Technologies, Inc. System ModelKM266APro-835 System TypeX86-based PC
I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code: Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ==============================[code].....
I was using windows 7. Today I installed ubuntu 10.10. After installing the normal boot option is now replaced with grub boot menu. I am able to boot ubuntu successfully using that but I am not able to go to windows 7. In the menu it's showing: windows 7(loader) /dev/sda1 whereas my windows is installed in /dev/sdb1. Also it's showing another entry for windows xp whereas I don't have windows xp at all. My CD drive is also not working therefore I am not able to run the windows 7 rescue utility. Also not sure whether it'll work or not.
So here is the deal, I have my wifes computer set up to dual-boot Ubuntu 9.10 and Windows 7. She uses a HP G60-445DX laptop, and something very funky is going on.
1. I first installed Windows 7, and it boots fine multiple times with no problem.
2. Next, I install Ubuntu 9.10. After installation is finished, I select reboot, and choose Windows 7. It boots fine.
3. Then, I reboot into the newly installed Ubuntu for the first time, get to the desktop, and reboot.
4. Now when I select to boot Windows 7, it gets about half-way, and suddenly reboots the computer.
I've troubleshooted this thing for days on end trying to isolate exactly what is causing Windows 7 not to boot. After reinstalling Windows 7 again, it once again boots fine, even after I use the live CD to restore Grub 2. It's only after I boot the fully installed Ubuntu 9.10 that her Windows 7 install starts acting weird. All I can narrow it down to is that after I boot into Ubuntu for the first time (after an install), Windows 7 no longer boots properly.
I recently installed ubuntu on my netbook (asus eee PC). The problem is, when I restarted the computer and got to the overview on what to boot and chose Windows 2000/xp/vista etc etc sda1, I am not able to boot into windows. There is just a blinking underline _ <- like that in the top left corner. And nothing happens. I cannot risk to lose my files that are on the windows partition. What can I do?
i am having ubuntu 8.04. i have installed windows 7 but i am not able to boot into ubuntu 8.04. i have new version of ubuntu 9.10 in CD. does reinstalling the new ubuntu will overwrite my all previous data which i had in older version of ubuntu?
I had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.