Ubuntu :: 9.10 - Unable To Make Windows 7 To Boot
Mar 17, 2010
So here is the deal, I have my wifes computer set up to dual-boot Ubuntu 9.10 and Windows 7. She uses a HP G60-445DX laptop, and something very funky is going on.
1. I first installed Windows 7, and it boots fine multiple times with no problem.
2. Next, I install Ubuntu 9.10. After installation is finished, I select reboot, and choose Windows 7. It boots fine.
3. Then, I reboot into the newly installed Ubuntu for the first time, get to the desktop, and reboot.
4. Now when I select to boot Windows 7, it gets about half-way, and suddenly reboots the computer.
I've troubleshooted this thing for days on end trying to isolate exactly what is causing Windows 7 not to boot. After reinstalling Windows 7 again, it once again boots fine, even after I use the live CD to restore Grub 2. It's only after I boot the fully installed Ubuntu 9.10 that her Windows 7 install starts acting weird. All I can narrow it down to is that after I boot into Ubuntu for the first time (after an install), Windows 7 no longer boots properly.
View 4 Replies
ADVERTISEMENT
Jul 18, 2010
I have Ubuntu 10.04 LTS and Windows XP installed on my laptop. Usually when booting, I get the GRUB 2 menu and I can boot into either Ubuntu or XP.I was playing around with EasyBCD, then after trying to remove it I was unable to boot into Windows, I used a Windows 2000 CD recovery console to fix the MBR (using: fixboot and fixmbr).Now Windows starts up when I power on, but I don't get the grub menu anymore with an Ubuntu option. If I boot from the Ubuntu Live CD and try to mount my Ubuntu partition (/dev/sda5) I get this error:
mount: wrong fs type, bad option, bad superblock on /dev/sda5,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
[code]....
View 2 Replies
View Related
Mar 23, 2011
I had a dual boot system with 3 partitions, Windows 7 on one partition, and Windows XP on another partition and a Data partition. I decided to load Ubuntu 10.10 on the Windows XP partition.During installation I selection manual partition, and deleted Windows XP.after successful completion of Ubuntu installation "Grub" directly boots into Ubuntu, it doesn't show me the OS selection screen. After following some forum posts I did an update grub
Code:
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-2.6.35-22-generic
Found initrd image: /boot/initrd.img-2.6.35-22-generic
[code]....
View 8 Replies
View Related
Jan 28, 2010
Having a major issue with my laptop. I am unable to boot into my Vista installation.I am currently posting this through my Fedora 11 installation which I had already. If anyone is interested, the BSOD error is:
0x0000007B (0x80399BB0, 0xC0000034, 0x00000000, 0x00000000)
As far as I know, a '7B' BSOD is usually a hard disk error but I am 100% sure the HDD is fine as I can read and write from both Fedora and Knoppix without issue. Steps taken so far: Obviously, I have tried the usual steps of trying to start windows in safe mode, last good config, and all of the F8 options. When they failed, I used fedora to check for some solutions online (Mostly useless answers from MS) and I found one successful case when a person flashed his BIOS back to an earlier time. Unfortunately, I cant get the BIOS update I got from the Dell website to boot from a USB drive (Says invalid boot disc - the BIOS on it is in the .exe format which I can't use in linux) and I do not have a floppy drive on the laptop.
So, I put in my Dell drivers and utilities CD hoping that it would give me some option to update (Or roll back) the BIOS but there was no such option. However, it did give me a load of diagnostic options including repair options by symptom so went with the "Unable to boot from BIOS". Unfortunately, that didnt help me at all. So, I got my Vista installation disc (OEM supplied) and managed to get to the repair menu (Which I had among my F8 options anyway) but this also has the option to reinstall. Unfortunately, it states that "Upgrade is unavailable" and that a clean install is the only thing I can select (At the expense of my files and settings).
As for the repair options, the automatic recovery doesn't seem to find any errors, asks to reset and see if all is well (It isn't). For some reason, system restore doesn't detect any restore points. There are no windows memory errors detected and I have no backups. So, i'm left with a command prompt that, by default, is asking for a file in this folder: X:/WINDOWS/System32/ I have no idea where it is getting the X: drive from - I have C and D drives for windows only. As per another online guide, I tried:
[Code]....
View 8 Replies
View Related
Jul 14, 2011
How to make Windows Boot Manager automatically open GNU GRUB and then with GNU GRUB automatically boot Linux Ubuntu 11.04.
View 1 Replies
View Related
Aug 21, 2010
How can I make GRUB boot into Windows 7 automatically and display the boot menu when I press SHIFT at bootup. I am using GRUB2.
View 2 Replies
View Related
Jul 16, 2011
I installed UBUNTU 10.10 alongside windows 7. Now the problem is: If i boot into UBUNTU first, ethernet does not work. But it works if i boot windows first and restart back into UBUNTU. Which means i have to boot windows first to make ethernet work on UBUNTU every time i start my PC.
View 9 Replies
View Related
Jan 30, 2010
I had Windows 7 installed on my system, then I installed Debian testing with grub2 as its boot manager.Initially I couldn't see windows entry in grub at all, so I ran:aptitude install os-prober kcpuload update-grub Now I can see the entry, but when I select it I get only Win7 system restore, instead of the the real thing. Any ides how to make it work?
EDIT: I tried the suggested approach to add a new file to /etc/grub.d, which generated an entry in grub.cfg, but it does not appear in the grub menu on boot :(
I have this:
grzes:/home/ga# cat /etc/grub.d/11_Windows
#! /bin/sh -e
echo Adding Windows >&2
cat << EOF
menuentry "Windows 7″ {
[Code]...
View 1 Replies
View Related
Apr 3, 2010
I installed Ubuntu a while ago now and I like it but when I installed it I removed windows and now its starting to annoy me. I cannot sync my ipod touch, I can't play some of my games because they are all meant for windows and wine does not work for then so what I want to do is uninstall ubuntu and reinstall windows xp, then I will reinstall ubuntu and this time around I will make a dual boot. Only one problem, I don't know how to uninstall ubuntu.
View 9 Replies
View Related
Apr 29, 2010
confirm or deny if 10.04 and Windows 7 cleanly dual boot? If Win7 is already installed and I plan on installing 10.04 after, do I need to make special changes to get them to dual boot properly?
View 9 Replies
View Related
Aug 5, 2010
I am running a dual boot with Windows 7 pro and ubuntu.
How do I change the boot order to make windows 7 the default start up??
View 3 Replies
View Related
Nov 9, 2009
I have read some stuff but none seemed to work such as putting default=saved and in the window (other) section putting savedefault. hmm I know I can just specify the number after default but that breaks when a new kernel is installed. so any way to always make windows the default choice (so my wife will stop moaning
View 9 Replies
View Related
Jun 14, 2010
I installed ubuntu using wubi and then I tried installing grub 2 but it failed. I need a way to reinstall the mbr sp it will load the windows 7 loader from the first partition.
View 1 Replies
View Related
Aug 31, 2010
I have Windows 7 and Ubuntu 10.04 dual-booted on my machine. grub was aautomaticlu installed as the primary loader. Soon i want to nuke my ubuntu partition but i know that will delete grub. Can i remove grub or at least make Windows boot loader default.
View 2 Replies
View Related
Jan 23, 2010
I want to make dual boot system with windows Xp and Linux fedora 11, please help and guide me in detail, also I tried it with fedora 10 and windows xp, it easily works without any problem, but in fedora 11 the grub boot loader is not detecting the installed Xp
View 2 Replies
View Related
Oct 23, 2010
I was using windows 7. Today I installed ubuntu 10.10. After installing the normal boot option is now replaced with grub boot menu. I am able to boot ubuntu successfully using that but I am not able to go to windows 7. In the menu it's showing: windows 7(loader) /dev/sda1 whereas my windows is installed in /dev/sdb1. Also it's showing another entry for windows xp whereas I don't have windows xp at all. My CD drive is also not working therefore I am not able to run the windows 7 rescue utility. Also not sure whether it'll work or not.
View 9 Replies
View Related
May 25, 2011
I have Windows 7 and Fedora 14 both on my laptop in dual boot configuration. When my computer starts up it shows a screen that says press any button to select another operating system to start, then I can make Windows 7 start. But after 2 seconds, if I DON'T press any button then Fedora starts automatically. How can I change this so Windows starts automatically when I don't press any button?
View 4 Replies
View Related
Jun 24, 2010
I'm running ubuntu for the first time. I have it install in Windows xp and boot it up after restarting the com. But I'm unable to boot up ubuntu. I can however go into the recovery failsafe mode. How should I debug the errors?
View 1 Replies
View Related
Nov 14, 2010
I recently installed ubuntu on my netbook (asus eee PC). The problem is, when I restarted the computer and got to the overview on what to boot and chose Windows 2000/xp/vista etc etc sda1, I am not able to boot into windows. There is just a blinking underline _ <- like that in the top left corner. And nothing happens. I cannot risk to lose my files that are on the windows partition. What can I do?
View 6 Replies
View Related
Dec 1, 2010
installed ubuntu on preinstalled windows7 hp notebookpc windows7 not booted. so i just use windows recovery cd and use some bootrec fixmbr commands 4 now i am unable to use both.
View 5 Replies
View Related
Dec 18, 2010
I was using Windows XP before. I installed Ubuntu some weeks back and removed Windows completely. Now I want to completely remove Ubuntu and install Windows XP back. But the Windows XP bootable CD won't boot. I DON'T get a screen saying, "Press any key to boot from CD.. I've changed my boot sequence under BIOS settings to CD first and then HDD. Still every time I restart with the CD, it loads Ubuntu.
View 9 Replies
View Related
Mar 4, 2010
i am having ubuntu 8.04. i have installed windows 7 but i am not able to boot into ubuntu 8.04. i have new version of ubuntu 9.10 in CD. does reinstalling the new ubuntu will overwrite my all previous data which i had in older version of ubuntu?
View 4 Replies
View Related
Mar 31, 2010
I installed Windows XP Pro and RedHat Linux Enterprise 5 on my PC for my purpose. The PC is used by other family members too and they need only Windows OS for browsing. It is becoming problem for them to reboot after the PC enters into Linux by default. I am still learning Linux and I want to edit the /boot/grub.conf file to make Windows as default OS to boot. The following is the content of my grub.conf file (FYI):
#boot=/dev/sda
default=0
timeout=10
splashimage=(hd0,5)/grub/splash.xpm.gz
[code]....
View 4 Replies
View Related
Mar 19, 2010
Upon trying to boot Windows I got through the GRUB startup selections and then i get stuck at a black screen displaying "Starting Up. . ." That would be no problem, I just boot ubuntu instead and mount the partition to access the programs I'm looking for. Now I get an interesting error message:
"Error mounting: mount exited with exit code 13: ntfs_mst_post_read_fixup: magic: 0x00150000 size: 4096 usa_ofs: 0 usa_count: 1040: Invalid argument Actual VCN (0x15000011d92501) of index buffer is different from expected VCN (0x1). Failed to mount '/dev/sda1': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details."
I would run chkdsk in windows if I could, but that's my problem in the first place.
View 3 Replies
View Related
May 10, 2010
I "USED" to have a dual booting pc...with Windows 7 & ubuntu 10.04.(NOT Wubi) 2 Days back my windows 7 crashed...so i had to reinstall windows 7. But after reinstallation there was no option to boot into ubuntu 10.04. My system automatically boots into windows 7. I need to fix my ubuntu installation so that i get an option to select which OS to boot...at the startup.
View 9 Replies
View Related
May 31, 2010
I am new to Ubuntu. I recently upgraded my Ubuntu from 9.10 to 10.4 (64bit) since then I am unable to dual boot to WIN2K3 from the same HDD as my Ubuntu. I have ran some of the suggestions like: Sudo update grub and Testdisk both did not provide any errors on my partitions and my primary partition displayed in Testdisk was WIN2K3, now when I reboot and select it from the boot menu it just simply show a blinking cursor.
I am out of ideas and I need a solution to suit my configuration. I prefer not to re-install or repair any WIN2K3 OS. Can someone assist and let me know what you need from me to further understand my issue.
View 4 Replies
View Related
Dec 7, 2010
I just installed ubuntu via the windows installer. When I try to boot it, it comes up a cmd line and gives me some choices of boot/grub... and boot/disk/... they all lead back to the cmd line except the boot/disk option which leads to a message saying that it cant find the disk...
View 1 Replies
View Related
Dec 19, 2010
I have two separate hard disks, one having ubuntu 10.04 and one having Windows XP. I'm unable to get an option to choose from grub menu as to which operating system i want to boot into.
View 3 Replies
View Related
Jun 15, 2010
I installed Redhat Linux on my Windows Vista machine. I am unable to boot my windows vista now.The error that i get when i select the option (other) when booting my machine. 'Other' refers to my Windows vista. I am able to successfully boot my linuxBooting 'Other'rootnoverify (hd0,1)chainloader +1Error 13: Invalid or unsupported executable format
grub> geometry (hd0,1)
drive 0x88: C/H/S = 1023/255/63, The number of sectors=390721968, LBA
Partition num: 0, Filesystem type unknown, partition type 0x27
[code]....
View 5 Replies
View Related
Apr 10, 2010
I upgraded from grub to grub2 recently, and during an update of my system, it ran the update-grub command which prompted a window asking me where to install Grub. Since I didn't know what partition to install it to and the help suggested to install it to all if I was unsure what partition to install it to - I accidentally installed Grub to my Windows partitions (both the regular and the recovery console).
So now, I can't boot into Windows - the computer just hangs after Grub with a blinking cursor and I have to perform a hard reset. Is there any way for me to restore the boot record for the windows partition without having to reinstall windows from the ground up?! I can't use Linux for my webbanking and other important tasks, so (unfortunately) I need Windows back desperately!
View 2 Replies
View Related
