think I have a quick question about outgoing server, how do I change the port number, I don't see an option for it anywhere. I kept getting this error when I try to send an email.
Code: Sending of message failed. The message could not be sent because connecting to SMTP server smtp.live.com failed. The server may be unavailable or is refusing SMTP connections. Please verify that your SMTP server settings are correct and try again, or contact the server administrator.
i am using Fedora 14. Once system get hanged during opening a video file so I had to restart the system by pressing restart button. But after restarting there are few problems appearing like system monitor not opening and Thunder bird opening but not showing any folder including inbox.
---------- Post added at 04:54 AM GMT ---------- Previous post was at 04:42 AM GMT ----------
So after installing T-bird 3, I've pointed it to my old profile folder (which had a different name), and all of the settings seemed to be imported fine: I get all the folder and all of mail accounts, and also when I check e-mail, in status bar at the bottom I see how it successfully connects to all my mail servers and checks them. However, there are a lot of issues in the process:
1. It doesn't download any e-mail (but I know for a fact that there is a lot of it)
2. When connecting to every new server, a message asking me to wait while the folder is being processed pops up. Which happens even on the mail check upon the startup when it is certain that this is the first time it check the e-mail.
3. If an indexing feature is enabled, it hangs up with a message "Determining which messages to index in Sent" or something...My total e-mail folder is about 500 MBs, so it shouldn't be that bad, right?
4. But even if that feature is disabled - and that is the most important problem - all of my folders are empty!
I have created my own custom ubuntu distro using the alternate installation cd and doing a command line install. I'm using ubuntu 10.04 as my base and am also using thunar as my file browser and am trying to create a secure desktop environment and to do that I'd like to restrict thunar to a certain partition. Is it possible to do that?
I have an Acer Aspire One that worked fine with version 9.* of Ubuntu, then I upgraded to v10.1. Now Thunderbird, Evolution, and Firefox (Namoroku?) can't connect, either wirelessly or by Ethernet cable, to my ISP. I get error messages like "connection timed out" or "cannot find {link}". I can PING my ISP from Terminal, though, and I have the machine set up for dual boot with Windows 7 and Firefox works fine under Windows.
I have no idea what to look for or where to start. Any help would be greatly appreciated.
Everything has been working fine but I recently installed a sata drive and lvm didn't see it. I'm sure its a driver issue. I'm running centos 5 on a Tyan-Thunder-K8SR-S2881 board. currently centos is running on an IDE drive. I tried several drivers for red hat distos 3 & 4 but no success for my sata drives to work.
I've been working on this console-based game (in c) in which the player walks around touches floating orbs which do things etc. And I want to make it so that an object on the map blocks the sight of the player, which is something I haven't tried until now. This is the part of the code which handles this sort of thing :
void uncover(int shadow) { int wp, hp, xp, yp, pp, // point placement mp, // maximum pp value // (that's what she said) lp; // light placement .....
This <works> but isn't very nice. What I would like to do is to change the third to last if statement, which is really more of a geometry problem, which could be frased as : given points (x,y) , (plist[pp].x,plist[pp].y) and (wp,hp) create a conditional which tests weather or not point (wp,hp) is within the shadow cast by light-source (x,y) being blocked by an object at (plist[pp].x,plist[pp].y), [with some width, ~1] but there isn't a geometry forum, and it's somewhat more related to programming.
I have installed a linux server in my office to run 16 machines. Its main use will be a internal mail server but will be also running websites.
I have installed Ubuntu 9.10 server x64 and have got apache running.
I am looking for the simplest more robust solution for smtp, pop3 and imap. I have only ever used qmail before and found it a pain to configure and its getting old so I though I should probably try something new. I have not much experience with running pop3 or imap on linux so would love a suggestion on that.
I installed IBSng in ubuntu-server .but i can not start this server :Code:[root@myserver]# /etc/init.d/IBSng start.: 8: Can't open /etc/rc.d/init.d/functions"functions" file is in RPM base system . and ubuntu have not this file
have to create a webhost on an running fedora server which runs multiple webpages + a coldfusion serveri have to add an coldfusion virtual host to these.what i would do:*crate a new user & group*enter vhosts.conf and copy an existing host and modify it for the new one.*create an new folder and copy the main files (phpstarter and webroot) *chown the files for the right useri think an apache graceful would be needet
Right now i have a HP DL 180 Server with 130 Gb Hard Disk & 8 Gb ram after Raiding0+1. i want to configure Domain Controller Server for my office for 200 to 300 Users. what should the partition size must be mentioned in my 130 Gb Hard Disk, is that going to be Sufficient for ME ?
i am bit confused about /Usr /Var /Boot partitions, as i need to manage perfectly in 130 GB
if i go with 4 Gb swap and remaining for " / " is that will be fine ? should i need to specify partition sizes separately for / tmp /var / usr ..
I'm running a linux cloud server with the following config 1.2ghz Processor allocation 752MB Ram
The site loads slow and clicking a link almost freezes the page for a second. Also, the page loads could be much faster. We've been running mysqltuner and have pretty much optimized all slow queries. Is there anything we can do to fine tune the server for faster and more responsive?
iam trying to sync file server data into backup server machine by command- rsync -avu path/of/data ipaddress-of-backup-server:/path/where/to/save after running it ask for root password and manually it is successful.but i want to make it automatic.for that i also tried cronjob and also generated authentication key but iam not successful in login automatically..anybody know how to authenticate root to login for storing data in backup server.
I will be relocating to a permanent residence sometime in the next year or two. I've recently begun thinking about the best way to implement a home-based network. It occurred to me that the most elegant solution might be the use of VM technology to eliminate as much hardware and wiring as possible.My thinking is this: Install a multi-core system and configure it to run several VMs, one each for a firewall, a caching proxy server, a mail server, a web server. Additionally, I would like to run 2-4 VMs as remote (RDP)workstations, using diskless workstations to boot the VMs over powerline ethernet.The latest powerline technology (available later this year) will allow multiple devices on a residential circuit operating at near gigabit speed, just like legacy wired networks.
In theory, the above would allow me to consolidate everything but the disklessworkstations on a single server and eliminate all wired (and wireless) connections except the broadband connection to the Internet and the cabling to the nearest power outlets. It appears technically possible, but I'm not sure about the various virtual connections among VMs. In theory, each VM should be able to communicate with the other as if it was on the same network via the server data bus, but what about setting up firewall zones? Any internal I/O bandwidth bottlenecks? Any other potential "gotchas", caveats, issues? (Other than the obvious requirement of having enough CPU and RAM).Any thoughts or observations welcome, especially if they are from real world experience in a VM environment. BTW--in case you're wondering why I'm posting here, it's because I run Debian on all my workstations/servers (running VirtualBox as a VM for Windows XP on one workstation).
I have got a running mail server on CentOS5.4 Final using Zimbra free edition. . Assume that domain is organization.com.local And it is running fine with users created and bugzilla running on the same machine can send mails using this server. But it can obviously send messages to the internal users. There is this option to configure it to use external mail server to send mails outside the network but my external smtp server needs an authentication.Is it possible to configure it this way to use my external server to send mails from internal domain to say gmail?
i recently installed apache2 mysql php exc. to run a realtime stat site for my servers.the only thing is that the buttons/ images are not showing up.i checked that my GD was up to date and installed perl5 GD. dont know what else to check.my site with problems go to:http://24.20.177.228/stats_public
I am working on linux server with below specifications.Linux EDT 2008 i686 i686 i386 GNU/LinuxWhile checking the status of the server using the command 'opmnctl status' and when server is down the output is not getting redirected to file.I m using the command as,opmnctl status > abc.txt.
i have been trying to complete the following project1) Configure a FTP server where we can upload and download files.........2) server must run at 9 pm & stop at 9 am automatically ............although the first task was easy ,i have no idea how to accomplish the 2nd task(not to mention I'm a new user)
I've two internet based server ( xx.xx.xx.xx and yy.yy.yy.yy ) The Y server is running VNC server and is responsible for answering to VNC sessions. But I need to hide the IP of Y server so I want X server to be as VNC Proxy and redirect all VNC sessions to Y server.
I guess the best way is to use iptables but actually I can't get it working so
I'm trying to setup RAID 1 on a CentOS 5 server for a zimbra email server.I get a partion schema error. Can I do this?The server is a HP Proliant ML150 G3 server with two 80GB HDD.
i am trying to send malformed string into ability ftp server in order to have some unexpected crashes. i login in into the ability ftp server on my window 7.On my virtual machine,i am working on a backtrack 4, i tried to send some string to have some unexpected crashes, but i couldn't success.here is the code:
I have installed the Apache, PHP and MYSQL in the rackspace cloud server environment. Can anyone please guide me How can I configure email server in that with postfix or some other with multiple domain.
how do i able to allow some users that are able to create content in directory of http server. For example: i have configured a web server which have default document root /var/www/html, now i want to extend my web server through virtual hosting , i have enable virtual hosting, but i want that user sumit is able to create content in /var/www/html/secret. which is the document root for my virtual site?
I have succesfully installed Postfix mail server in my linux machine(using RHEL 5) but unable to communicate through mails from my linux machine to my windows machine(Windows2003 server). What are the possible configuration steps that i need to configure on my windows machine
I did a basic installation of Debian, which will be used for a mail server. I Installed the bind9 and did the configuration of the zones and created the files in the directory / etc / bind. After the process I typed the following command to test my DNS:
nslookup mail.hotelpart.com and presented the following error:
Easier to stay I put my files in message: The files named.conf, db.hotelpart.com and db.111.20.11.200.
I have been working on NTP to find out resolution of my issues unable to find. let me briefly explain here. I have three servers and no server is fully synced with remote NTP server.I don't know why it sync time alternatively with remote NTP server and LOCAL whereas there is not issue in connectivity/reachability of NTP server and NTP clients. Also server 1 reporting kernel time sync disabled 0001.
