Server :: Configure Redhat Enterprise Server 4 As Router And Proxy Server
May 18, 2010Im new in linux i want to configure my redhat machine as both router and transparent proxy!
View 1 Replies
ADVERTISEMENT
Debian Configuration :: Install A Multi-core System And Configure It To Run Several VMs, One Each For A Firewall, A Caching Proxy Server, A Mail Server, A Web Server?
Jan 25, 2011I will be relocating to a permanent residence sometime in the next year or two. I've recently begun thinking about the best way to implement a home-based network. It occurred to me that the most elegant solution might be the use of VM technology to eliminate as much hardware and wiring as possible.My thinking is this: Install a multi-core system and configure it to run several VMs, one each for a firewall, a caching proxy server, a mail server, a web server. Additionally, I would like to run 2-4 VMs as remote (RDP)workstations, using diskless workstations to boot the VMs over powerline ethernet.The latest powerline technology (available later this year) will allow multiple devices on a residential circuit operating at near gigabit speed, just like legacy wired networks.
In theory, the above would allow me to consolidate everything but the disklessworkstations on a single server and eliminate all wired (and wireless) connections except the broadband connection to the Internet and the cabling to the nearest power outlets. It appears technically possible, but I'm not sure about the various virtual connections among VMs. In theory, each VM should be able to communicate with the other as if it was on the same network via the server data bus, but what about setting up firewall zones? Any internal I/O bandwidth bottlenecks? Any other potential "gotchas", caveats, issues? (Other than the obvious requirement of having enough CPU and RAM).Any thoughts or observations welcome, especially if they are from real world experience in a VM environment. BTW--in case you're wondering why I'm posting here, it's because I run Debian on all my workstations/servers (running VirtualBox as a VM for Windows XP on one workstation).
Server :: Configure RedHat As A Time Of Day Server For A Docsis Modem System
May 13, 2011I have been able to find enough information that I need to enable 'time-udp' in /etc/xinetd.d/ But there isn't an entry for time-udp. How do I enable time-udp (Time of Day server) on a Red Hat system? It's RHEL 5.6 64bit.
View 1 Replies View RelatedServer :: CVS Configuration On Redhat Enterprise ?
May 11, 2009Installation of CVS on Redhat linux
Installing CVS on Redhat Linux Redhat Enterprise 4.0
The following steps give simple steps to install CVS software on Redhat Enterprise Linux 4.0.
1) Download the tarball cvs-1.11.1p1.tar.gz
2) Run "gunzip cvs-1.11.1p1.tar". You will get file called cvs-1.11.1p1.tar.
3) Then extract this file using command
"tar -xvf cvs-1.11.1p1.tar".
4) Then go to directory cvs-1.11.1p1.
5) There you will find a file called INSTALL. Read it once carefully.
6) Now run the command "./configure."
7) Build it using the command "make".
8) Install binaries/documentation using command "make install".
9) Now open file called /etc/services and add the following lines.
Cvspserver 2401/tcp # CVS client/server operations
cvspserver 2401/udp # CVS client/server operations
10) Open file called /etc/xinetd.conf and add the following lines to that file.
service cvspserver
{
Port = 2401
socket_type = stream
protocol = tcp
wait = no
user = root
passenv =
server = /opt/bin/cvs
server_args = --allow-root=/home/cvs -f pserver
env = HOME=/home/cvs
log = /var/log/cvslog
}
11) Space on both sides of = in the above file is a must.
12) Restart xinetd services by running command " services xinted restart "
13) Check whether CVS is running on the port 2401 by using the following command "nmap IP |grep 2401". If the CVS server is running correctly it will give output as "2401/tcp open cvspserver ".
It doesn't output like "2401/tcp open cvspserver"
Server :: VNC Connection To REDHAT Enterprise 4?
Sep 26, 2009I have a problem in connecting from windows xp OS to the REDHAT LINUX through vncviewer. The first connection works fine. However, if I want to add more than one connection by establishing the hostname:2 through vncviewer, it stops working. I have tried modifying the file /etc/sysconfig/vncservers to add more than one allowable connections. It still fails...
View 4 Replies View RelatedGeneral :: Restoring RedHat Enterprise Server X64 5.4?
Jul 11, 2011at work place I have an HP ProLiant DL580 with RedHat Enterprise Server 5.4 x64. Today I cloned this machine using clonezilla. What I would like to do is restore the image to VMWare machine for personal purpose (I cannot perform tests on production machine). But after restoring on VMWare I got "Kernel Panic". That's normal due to different hardware.
Now, is there a way to remove the Kernel Panic and correctly boot the machine? I ask our tech department for the RedHat CD1 to enter the "linux rescue" enviromnent, then try to re-read the hardware list with
# chroot /mnt/sysimage
# kudzu
Networking :: Cannot Unload Or Blacklist Bcm43xx On Redhat Enterprise Server?
Jan 21, 2010I installed Redhat nash version 5.1.19.6 with kernel 2.6.18-128.el5-xen-i686 on a Dell Inspiron 1300 with Broadcom BCM4401 (eth0/LAN) and BCM4318 (eth1/WLAN). eth0 is working fine, but eth1 was causing trouble. After some difficulties with missing packages I managed to install ndiswrapper, blacklisted module bcm43xx in /etc/modprobe.d/blacklist and removed it, loaded module ndiswrapper and had connection. But after reboot module bcm43xx was again loaded. So blacklisting does not seem to work.And additionally strange to me, I cannot unload module bcm43xx anymore. And if I load ndiswrapper driver bcm43xx is still used as the terminal command 'dmesg' is showing me in the system log, while ndiswrapper was used when the connection was once and only once established
View 13 Replies View RelatedSoftware :: Syslog Alerts Not Triggering To Server (Redhat Enterprise 5)?
Nov 13, 2010just set up a windows server and other windows boxes send alerts to it no problem.Yesterday I configured my linux box (RHEL 5) using /etc/sysconfig/syslog and /etc/syslog.conf so that all alerts would go to the syslog server.There are no external firewalls involved and while the firewall is working on my linux boxI have made sure port 514 TCP/UDP are let through.Ive checked syslogd and klogd are running.I've also applied the '*@10.20.30.40' line in etc/syslog.conf. Basically Id like everything to go to the syslog server.Now if I telnet to the syslog server on port 514 I can type text on the linux box and it comes through on the syslog server. Great - but no syslog alerts seem to come through normally, even when I reboot the box.I've tried *., .*, and * to no avail, ive got an entry in my hosts file for the server 10.20.30.40 and tried using a name instead of an ip address, no luck.
View 1 Replies View RelatedRed Hat :: Oracle 10g Database Installation Procedures In Redhat Enterprise Server 5?
Jan 13, 2011I have installed Redhat Enterprise Linux Server 5 on my laptop. I want to install Oracle 10g database on RHEL5 server. I want to know whether any additional rpm's need to install before installing the Oracle 10g.
View 1 Replies View RelatedGeneral :: Command To Show The Luns Mapped To Redhat Enterprise Server 6.1 Host?
Nov 15, 2010command to show the luns mapped to redhat enterprise server 6.1 host. And how do i known the WWNN for the FC HBA attach to the host.
View 6 Replies View RelatedServer :: DNS Configure On Red Hat Enterprise 5?
Oct 28, 2010Can you Please tall me What are the configuration file for DNS
View 5 Replies View RelatedServer :: Configure DNS On Oracle Enterprise 5.4?
Apr 20, 2010I'm trying to configure DNS on Oracle Enterprise Linux 5.4 - Kernel 2.6.18-128.el5. When I restart the named service, I'm not getting any errors. But service is showing Failed. What could be the reason?
View 3 Replies View RelatedGeneral :: Configure VNC Server After Installation In Red Hat Enterprise 6?
Aug 9, 2011I successfully install vnc server and client in my machine after installation in GUI mode i clicked on service and enable vnc server when i click on start. It says that "This service is being refreshed right now" Then after i use terminal and typed "#service vncserver start"
its display error message "Starting VNC server: no displays configured [FAILED]"
Server :: Configure Freeradius With WPA2 Enterprise?
Nov 16, 2010Im having a lot of trouble configuring freeradius for Ubuntu. I have freeradius installed but Im having trouble finding any information on how to edit the configuration files to create users and be able to WPA2 Enterprise. The wireless router that I am using is an Linksys WRT54gl.
View 2 Replies View RelatedServer :: Minimum Partition Size Required In Redhat Linux Server For DNS Server Configuration?
May 5, 2011Right now i have a HP DL 180 Server with 130 Gb Hard Disk & 8 Gb ram after Raiding0+1. i want to configure Domain Controller Server for my office for 200 to 300 Users. what should the partition size must be mentioned in my 130 Gb Hard Disk, is that going to be Sufficient for ME ?
i am bit confused about /Usr /Var /Boot partitions, as i need to manage perfectly in 130 GB
if i go with 4 Gb swap and remaining for " / " is that will be fine ? should i need to specify partition sizes separately for / tmp /var / usr ..
Server :: Connect Cisco Router In Redhat System 5.1?
Oct 7, 2010How to connect a new Cisco router in newly installed Linux pc what are the configuration will have to do.
View 1 Replies View RelatedNetworking :: Hide The IP Of Y Server Want X Server To Be As VNC Proxy And Redirect All VNC Sessions To Y Server
Aug 21, 2010I've two internet based server ( xx.xx.xx.xx and yy.yy.yy.yy ) The Y server is running VNC server and is responsible for answering to VNC sessions. But I need to hide the IP of Y server so I want X server to be as VNC Proxy and redirect all VNC sessions to Y server.
I guess the best way is to use iptables but actually I can't get it working so
General :: Configure LDAP Server In Redhat 5.1
Sep 26, 2010How to configure LDAP server in redhat5.1 but i want to know how to configure it.
View 5 Replies View RelatedServer :: Configure RedHat Cluster On Vmware?
Mar 20, 2011I am planning to configure RedHat cluster on vmware, i dont know how to configure, i googled a lot but couldn't find satisfactory docs for configuring, can any one provide me step-by-step or good docs to go ahead.
View 1 Replies View RelatedSoftware :: Installing/Configuring A Proxy Server On A Linksys Router?
Mar 18, 2009I have been happily running the (always latest) version of PolarCloud's Tomato software on my LinkSys WRT54G for about 2 years now. I am looking for a way to setup a Proxy Server on my Tomato-based router to use from a remote machine somewhere in the web cloud.The reason for wanting to set this up follows. I normally run Squid on a Ubuntu 8.04 box, which I use while I am away from my LAN at home to browse the net (I like to keep things between me and my ISP, as much as possible . I rely on my proxy server on a daily basis. The way it works is I SSH into my Ubuntu box, and forward squid ports. I then point my browser to the proxy on my box. For various reason, however, I would like to set it up so that I can also do this via my router. So, I would like to be able to ssh to my router (I can already do this), forward the proxy ports, and surf the nets happily via my router at home. I am happy to use existing solutions (if possible), such as privoxy or squid, and am also open to setting up a custom-based solution, as may be necessary.
View 1 Replies View RelatedServer :: Bridged Router / Modem Setup - Squid Transparent Proxy
May 19, 2010I'm using a Debian box as a gateway. I'm planning on bridging my DLink 604T modem/router so that traffic on the LAN goes to my gateway (which only has one NIC). The Debian box is running a PPPoe application which I'm hoping to log into the ISP through the DLink. I plan to configure the box as a squid transparent proxy. Most Howtos I've seen use NAT with 2 NICs, eth0 for the LAN and eth1 for the Internet. Any step-through to set up NAT for this?
View 4 Replies View RelatedGeneral :: How To Configure Proxy Server On Linux
May 19, 2010I am new to Linux and need to configure a Linux machine with any server. I plan to configure Proxy server. What should I do?
View 1 Replies View RelatedServer :: Trying To Configure Apache Reverse Proxy
Oct 4, 2010I have a question to masters of Apache. In my operating system (CentOS 5) I have installed two Apaches. One is Apache (port 80) from repository where I planning to configure proxy and second one is Apache integrated(port 8090) with KnowledgeTree software. The problem is that when I am trying to configure proxy reverse it simply doesn't work.
This is link to KnowledgeTree software:
- http://127.0.0.1:8090/knowledgeTree
This link I would like to rewrite with proxy like this:
https://myserver.com/knowledgeTree
(HTTPS dont forget)
In my ssl.conf in VirtualHost part I have created something like this:
Code:
<IfModule mod_proxy.c>
<Proxy *>
Order allow,deny
Allow from all
</Proxy>
ProxyRequests off
ProxyPass /knowledgeTree http://127.0.0.1:8090/knowledgeTree
ProxyPassReverse /knowledgeTree http://127.0.0.1:8090/knowledgeTree
<Location /knowledgeTree/>
ProxyPassReverse /
</Location>
</IfModule>
When I am trying to connect I see only: Unable to connect. Firefox can't establish a connection to the server at ifdocu.contaxt.biz:8090.
Server :: Persistent Caching Proxy Available To Configure ?
Nov 29, 2010Is there anything like a persistent caching proxy available in linux for me to configure, ie not public? (persistent meaning the cache remains in hard disk between reboots) Is it possible that it NEVER looks for any update to a page that is available in the cache?
View 1 Replies View RelatedGeneral :: Setup Remote Access Server On Red Hat Enterprise Server Release 5.1?
Aug 30, 2009how i have a machine installed Red Hat Enterprise Linux Server release 5.1 with 2 modem (usb & com port) still i want to configure RAS server so some pple able to connect my server and send me some files.
View 4 Replies View RelatedServer :: Configure Internal Zimbra Server To Use External Server To Send Mails?
Feb 16, 2010I have got a running mail server on CentOS5.4 Final using Zimbra free edition. . Assume that domain is organization.com.local And it is running fine with users created and bugzilla running on the same machine can send mails using this server. But it can obviously send messages to the internal users. There is this option to configure it to use external mail server to send mails outside the network but my external smtp server needs an authentication.Is it possible to configure it this way to use my external server to send mails from internal domain to say gmail?
View 15 Replies View RelatedCentOS 5 Server :: Automation Of Ftp Server \ Configure A FTP Server Where Upload And Download Files?
Jan 8, 2011i have been trying to complete the following project1) Configure a FTP server where we can upload and download files.........2) server must run at 9 pm & stop at 9 am automatically ............although the first task was easy ,i have no idea how to accomplish the 2nd task(not to mention I'm a new user)
View 5 Replies View RelatedServer :: Extend Rights In Samba For Enterprise File Server?
Jun 17, 2009I am trying to implement a NAS running Debian to replace the Windows 2003 file server.We implemented the system and we integrated it with the active directory. Is it possible to manage the access rights using windows tools and get the same amount of detail(not the right word) on access.As an example, we have the following folder structure:
Teams&Projects All users list, admins full
Team1 All users list, admins full, some users modify
Project1 All users no access, admins full, some modify, some list
I have read some articles on the internet that this is possible but I do not have enough information to implement this.
Ubuntu Networking :: How To Configure Squid Proxy Server
Mar 16, 2010how-to configure squid proxy server. I still haven't been able to find a solution. I want to set up squid as a open http proxy server. So people from other networks can connect through the proxy without having to login.Do I have to use iptables to reroute http traffic to squids proxy port? I have forwarded the port in my ISP modem so I know thats working, its the squid config that has flaws or iptables locally.
View 1 Replies View RelatedGeneral :: Configure Squid Proxy Server In Centos 5.5?
Apr 12, 2011how do i configure squid proxy server in centos 5.5 final text mode only to block facebook from 9am to 4pm
View 3 Replies View Related