230Gb HD, I recently partitioned a 90Gb slice, and ran 10.10 on it for a while, but due to not using it, I fired up gparted off a live disc last night and got rid of the partition. I got Gparted to make a 5gb swap, and the rest for 10.04, all is fine, rebooted to 10.04, updated grub, it removed the entry for 10.10, but reports that my hd is only 140gb, and sda2 is a 5gb swap. What gives? Where's my disc space?
View 2 RepliesI have an computer that mounts an external hard drive for backups. The Computer hard drive is about 110 GB; the external drive is 120 GB.
When I do a df -h it tells me there is 97% in use.
Checking the computer harddrive I am using about 52.8 GB (of the 110 GB) 501,579 items, totalling 52.8 GB (some contents unreadable)
The external drive is using roughly 49GB of the 120 GB available.
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/xanadu-root
114536088 104995108 3768692 97% /
udev 1030572 328 1030244 1% /dev
[Code]....
It seems like the total % is a reflect of total space consumed calculated off of ONE of the hard drives.
SERVER INFO:[root@bml pts]# uname -aLinux bml.xxx.co.uk 2.4.18-6mdk #1 Fri Mar 15 02:59:08 CET 2002 i686 unknownCan someone explain exactly how 'who' builds its user list?I have a problem where it's listing a user on my server, but I can not kill them.
# [root@bml pts]# who | sort
...
simons pts/52 Nov 2 12:33 (derby1)
[code]....
I have AMD Phenom 8550 triple code processor, with 2.20ghz speed and 4gb ram. I am trying to install Redhat linux 9 first time. I am new to linux. While install system hangs with message
ehci-hcd 00:13.2: PCI device 1002:4396
echi-hcd 00:13.2: irq 10, pci mem f880f800
usb.c: new usb bus registered, assigned bus number 2
PCI:00:13.2 PCI cache line size set incorrectly (64 bytes) by BIOS/FW" expecting 16
how to get rid of this message
I recently bought an Asus M4N78-AM mobo, AMD processor and memory as an upgrade for a computer. I am using a SATA hdd (no problem with it) and wanted to attach also a Maxtor IDE && DVD IDE wich was the system disk in the old computer. From the very first time, I had problems reading the IDE when copying the old data to the new SATA disk - Slackware 13 only detected the partitions on second reboot (??), the first time complaining about partitions out of limits.
Once transferred all data, I compiled a new 2.6.32.4 kernel and discovered I couldn't access with it the IDE disk. Rebooting, BIOS reports IDE disk as 0Mb in setup, but 1,5 Gb in post summary (just before lilo). cfdisk, parted and sfdisk reports 1.5 Gb and that
should have c/h/s 24792/255/63 --> 204Gb
but has c/h/s */127/3 --> 1.5 Gb
Windows (dual boot) says also 1.5 Gb. BUT 2.6.29.6-huge-smp kernel (slackware 13's) says 204 Gb (reports correct c/h/s) and works fine.
Things I've tried:
partition/repartition with sfdisk, cfdisk, parted
dd first 1Mb with /dev/zero
format ext2/ext3/ext4/vfat
changed IDE cable (no HW damage visible anywhere)
set as slave, master, CS, with/without DVD
A strange thing is the mobo returns a "SATA 3 error" if the disk is alone in the IDE bus (with or without the SATA disk, wich is using the SATA port #1, by the way). If the DVD is connected as a slave, no errors at post. Well, the quick solution is obvious: USE THE DAMN 2.6.29.6 kernel! But the thing is I cant't figure out why BIOS says 0Mb first, then 1.5Gb and if this means the mobo is damaged; never had any problem with the disk before and SMART says OK... Also, I could use the IDE with Linux, but Windows will always report 1.5Gb (as I suppose it takes the geometry the same way BIOS does)/.
Today morning I logged on to one of our servers (through ssh -X) to perform a routine maintenance. When I tried to open a GUI application, it failed to connect to the X server of the workstation. Eventually I ended up issuing the command
Code:
df -h /
and shockingly it showed that / is 100% used. I checked / using
Code:
du --max-depth=1 -xh /
to check the sizes of the individual directories, which showed that only about 18% of the / is used and that confused me badly. There was no quick solutions when I googled around; but luckily I found the following link which nicely explained the issue I had:
[URL]
All I did was found out the services responsible for those unreleased files (using lsof +L1) and restarted them. That is it. Now df reports only 18% of the disk is used and all my X things started working again, thanks to Walker.
I was playing around with my keyboard shortcuts and accidentally mapped a command to the Ctrl+C shortcut. Now I can't stop programs running in the terminal with Ctrl+C and I have no idea of how to restore this functionality.
View 1 Replies View RelatedI've been seeing things like this in Firefox since installing:
Franais
Espaol
where the is a special/accented character. I've also been seeing the in places that seem likely to have some kind of quote mark, probably curved quotes. I can see straight single and double quotes. To correct this, I've tried changing the display font and the character encoding. I've also looked at the Mozilla Add-On site to see if I could find a plug-in to fix it, to no avail.
What should I try now? Currently I'm using Liberation Sans with UTF-8. I'm a native English speaker so I need a western encoding (I think), but I'd still like other characters to display properly.
No problems with CD-RW, but DVD+RW are being blanked in an incorrect way. Ubuntu cannot recognize them at all after the blanking. I have to take the disks to another computer having Windows installed to blank them via Nero, and after that I they become OK for burning in Ubuntu via Brasero. I've got an old LG CD/DVD drive which was working fine in Windows. Who can recommend another program for CD/DVD burning for Ubuntu 10.04? (correctly blanking, certainly) I have installed the suggested updates for Brasero but of no avail.
View 1 Replies View RelatedI am installing lucid, have installed nautilus-actions, and am trying to install a "Search for file in the active folder" function into nautilus-actions.. I brought up Nautilus Actions Configuration under System>Preferences and did the following:
Under Action tab
Checked Display item in selection context menu
Unchecked Display item in location context menu
Label: Search For File In Active Folder
[Code]....
when I right click a folder and select "Search For File in Active Folder, it brings up the search tool, but the folder setting is always my home folder--not the active folder. Of course I can change the folder to be searched, but the point was to search in the active folder. I got this Search For File in Active Folder function from an Internet site that I don't remember. However, I thought --path=%M would get me the active folder.
I was just trying to add new ssh users for tonight session and really messed up badly. I first installed package ibsh (iron-bars shell). I didn't know how to use it so I just went to a new user account and added ibsh at the end of his .profile. (I wrote
Code:
sudo gedit /home/username/.profile
which I suspect is the problem, I should have written
Code:
gksu gedit /home/username/.profile
??)
Well graphical logging became impossible in my own account until I did the following in my own account:
Code:
chmod 777 .profile
chmod 777 .ICEauthority
But desktop is still empty. I have restarted the system. I cannot use Firefox (it works without output for 10 sec and then dies). Chromium says something like "Problems due to not being able to update profile" but works. (I cannot see any files on desktop. But if I do places > desktop I can see them.) All the mentioned files had -------- for permissions so I did:
Code:
chmod 777 ~/Desktop/*
How to get my system back to normal. I think I got botched up permissions. If I create new user accounts, I get several error messages in these accounts.
I have got four webservers and one fileserver, all running Karmic and kernel 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:05:01 UTC 2009 x86_64 GNU/Linux.A folder on the fileserver has been exported using NFSv3 with these options: rw,async,no_subtree_check
and mounted on all four webservers with these options: efaults,rsize=32768,wsize=32768,noatimeThe webservers run Apache+PHP+APC. Some php-files include other php-files from the nfs mount, and are requested by users very frequently (~ 100 times per second). Sometimes but not always if I alter an included php-file using FTP (the FTP server is ProFTPD and runs on the fileserver), the file seems missing:user@webserver1: ~ $ ls --full-time -al /path/to/included/file.phpls: cannot access /path/to/included/file.php: No such file or directoryI can repeat this command for hours, but the file keeps missing. Until I query the directory:user@webserver1: ~ $ ls --full-time -al /path/to/included/ | grep file-rwxr-xr-x 1 1002 1002 14294 2010-07-04 21:11:30.000000000 +0200 file.php
I have a very strange issue. I have a desktop Ubuntu 10.04 system that has worked just fine for months. Now suddenly grub won't find the root partition which is an ext3 partition (/dev/sda2).The strange thing about this -- I can boot with the install CD and can mount it just fine when using mount -t ext3. If I don't supply the "ext3" type however it identifies the type as "silicon_medley_raid_member" and can't mount it. If I go into the Ubuntu 10.04 Admin>Disk Utilty -- it too identifies the type of the partition as "silicon_medley_raid_member" not ext3. Same with blkid -p. With that I get:
/dev/sda2: VERSION="42758.8269" TYPE="silicon_medley_raid_member" USAGE="raid"I have other ext3 partitions that are recognized OK. When I mount the strange partition forcing ext3 -- it too seems ok. I ran fsck.ext3 on it -- with -f - and no errors were found. I backed up the partition with tar -- again -- no errors archiving. I've even tried zeroing the first 1024 bytes of the partition -- that had no effect on this issue.So what is going on with this. Any ideas? Any ideas how to fix this issue? What am I missing?
I'm trying to use kchmviewer to look at a few eBooks but its rendering the pages incorrectly. Black text on black background. I heard that kchmviewer is the only chmviewer with a decent GUI. Does anyone have any alternatives?
View 3 Replies View RelatedI am new to Ubuntu, so I do not know how to report bugs if and when found. Could anyone tell me how to do so?
View 2 Replies View RelatedRunning Slackware 13.1
Whenever I insert a dvd or a cd, it automatically mounts to /media/[name], Like for example, the DVD I have in now mounts to /media/TBC3.2.0 (TBC3.2.0 is the name of the disc itself).
I'm needing this to mount to a regular point like /media/cdrom0 or whatever. How can I fix this?
I think I found a bug with the maverick installer. [URL]. The installer is incorrectly reading my partition table I'm afraid it might overwrite data. /dev/sda3 is the target for the install.
/dev/sda1 = 200M = Windows system partition
/dev/sda2 = 239G = Windows install
/dev/sda3 = 50G = Where I want to install Linux
/dev/sda4 = 45G = NTFS storage
At first I had /dev/sda3 as a RAW type. In fact the only way I could create ext4 is via mkfs. I did unmount them before proceeding - mounted just as a reference in the screenshot. fdisk reads the same thing. Fresh install from LiveCD. I only have Wipe entire disk or Advanced in the installer. I don't have the "Install along side another OS" option.
Some of my rather useful applications have stopped being useful after a fresh installation of lucid. In particular, the fonts rendered on emacs, openoffice and others look awful to unreadable. Attached is an example screenshot for emacs but it doesn't appear to be application specific. Also, I have a hunch it has to do with my graphics driver
(Linux-x86, Nvidia Driver v195.36.24 ona GeForce 6200 TurboCache).
I've got a couple of new hard disks that I have partitioned (3 partitions per disk) and set up in a mirrored software raid array using mdadm. They've synced, I've put file systems on them (1 x ext4, 2 x luks + ext4) and I can mount them. I've checked the partitions using fdisk. I've checked the filesystems using fsck. So far so good. Next step is that I'd like mdadm to automatically assemble them on boot. (Not bothered about mounting and crypttabing yet.)
I've used sudo /usr/share/mdadm/mkconf to generate a new mdadm.conf with the appropriate UUIDs for the new partitions. I've checked that this matches the output of sudo mdadm --detail --scan
The new lines in this file are:
ARRAY /dev/md9 level=raid1 num-devices=2 UUID=470fb8a6:45561fe0:ebda4a02:9ba7a1ed
ARRAY /dev/md10 level=raid1 num-devices=2 UUID=f351fbba:c704a4b2:ebda4a02:9ba7a1ed
ARRAY /dev/md8 level=raid1 num-devices=2 UUID=c6ccec17:2274588e:ebda4a02:9ba7a1ed
To check that the mdadm.conf is fine I have stopped the new arrays:
[Code].....
I have been doing some research on problems I have been having and I have narrows Compiz down to being the problem. I am running the prop Nvidea driver. I can use Unity 2d fine however I cannot use Unity at all I just get a blank screen with the mouse cursor no desktop ever loads. I have tried switching between gdm and kdm. I have now worked out that compiz looks like the problem. If I issue a compiz --replace at the terminal I get the same sort of problem I get when I log into the Unity 3d. I loose my left hand monitor (it goes black but I can move my mouse around) and on my right hand monitor I can operate things using the keyboard but when you click with the mouse it does not work although you can move it around fine. Never used Compiz and I dont know if anyone knows any troubleshooting I can try I have exhausted what I could find on the Internet (A few exports of global variables but none fixed anything).
View 1 Replies View RelatedI am having what I think is a slightly weird problem with the way some of my keys on my keyboard are mapped. When I try entering the "backslash" keys i get < and for the pipe key i get >. I have tried going through the keyboard layouts and trying other combinations but to no avail
System info
ASUS G51VX
Keyboard: Standard
Ubuntu 10.04 LTS the Lucid Lynx - released in April 2010 and supported until April 2013.
Is this seriously the ONLY way to report a bug? I can't just fill out a form somewhere without running software to do it? When I try to do it the way explained in the guide, it tells me that I'm using a stable version of Xubuntu, and that only people running dev versions (like 11.10) can report bugs.This seems absurd. Are they saying that all stable releases are perfect in every way? Surely one must be able to report a bug for them...
View 4 Replies View RelatedI'm running 13.1 on a Dell Latitude D630 with 4GB of RAM. My problem is that Slackware doesn't seem to see all of the available memory. Here are the #s being reported (just including pertinent #s rather than all output)...
Code:
free -m
total: 3546
[code]...
Laptop Acer Aspire 6930, Ubuntu 9.10 (Mint.
When I switch my laptop on when it runs from a battery, gnome-power-manager shows that it works from AC. It is enough if I really plug AC in and unplug it again, than g-p-m knows it works on a battery... It is frustrating when I want to use the laptop on the go, it doesn't know when battery is going to die.
I recently upgraded to a bigger hard disk. I used CloneZilla to copy my 150GB ext3 /home partition on my Ubuntu system to a shiny new 800GB ext3 /home partition. However, I've filled it up to almost 150GB, and I keep getting warnings that I have only 300MB available. It looks like the free space is being reported incorrectly. GParted recognizes the size of the partition as 800GB, and Nautilus reports the same when I boot from a live CD. I've tried using tune2fs to remove the reserved blocks and e2fsck -f to fix any errors, but nothing's changed.
View 4 Replies View RelatedI have installed HP g6 notebook from live-cd with 10.04 LTS across multiple partitions, only to find that the partition table is not setup correctly. I place the following mount points on separate partitions:
[Code]...
I just did a fresh install of 10.10. I was running 10.04 but formatted that partition when installing from a USB key. Pre-install, I ran:
Code:
sudo dpkg --get-selections > package.selections Post-install, I moved some of my etc files back in. I updated my sources.list. Then I ran
Code:
sudo dpkg --set-selections < package.selections
sudo apt-get dselect-upgrade
However, lsb_release is reporting 10.04. When I boot the system it doesn't show the typical boot screen but rather "Ubuntu 10.10" and output of what's loading up. On my laptop (upon which 10.10 installed fine), the splash screen shows the dots loading up with the new Ubuntu splash (10.10 style).
I go into Update Manager, and it thinks I need to upgrade to 10.10. Thing is, I'm already on 10.10. My kernel version is 2.6.35.22 and I'm running Gnome 2.32.00 according to the System Monitor. I'm wondering if I'm getting 10.10 updates or 10.04 updates since my system incorrectly thinks I'm on 10.04.
UBUNTU 10.10.This is almost funny but maybe useful: As I am working around my desktops, at times I was getting a sudden changes where shorter screens of my open programs and workspaces appeared. I pressed Esc and all went fine again.Since this was happening frequently I tried to find out what triggers it.I discovered that when I move my mouse pointer over the right bottom corner on my desktop all workspaces will be shown in reduced size in my desktop. When I moved my mouse in the left bottom corner, all open program in the active workspace where shown reduced in size (even the auxiliary pop up toolbars. Esc works fine to return to normal. When I move my mouse over the top right corner then all open programs in the open workspace will get minimized, Esc will not bring them back, you have to click in the task bar. When I move my mouse over the top left corner, unfortunately nothing happens.
View 2 Replies View RelatedI primarily use IDEA for my Java development work, however, I sometimes use Netbeans for stuff like GUI editing.When I have them both open in KDE 11.3, they get grouped together in the application panel instead of being separate.I think that this is probably due to them both being java applications.Is there anything I can do to separate them?
View 1 Replies View RelatedI have a linux box that I'm using to mount a windows 7 share with samba or cifs. The mounting itself goes fine, but directories with more subdirs or files do not seem to have all the content they actually have.
For example, viewing my music folder shows only first 37 subdirs. The ls says "total 49", which is the correct amount, but the listing itself shows only 37 first in alphapetical order.
On the other hand, my wallpaper folder contains 122 files. Ls claims there is 41872 and displays only 70.
Adding the mount option noserverino increases the listed files or dirs, but it still does not show them all.
I've tried to enable debug printk level, but dmesg doesn't show anything interesting.
I've tried to change values in /proc/fs/cifs, but it does not seem to have any effect.
I've tried changing samba package. So far I've tested with 3.5.7, 3.5.2, 3.5.4 and now 3.5.8.
My distribution was yesterday slackware 13.1. Today I upgraded to 13.37 (with samba 3.5.8) but the problem persists.
I've tried with kernel versions 2.6.35.12, 2.6.38.2 and 2.6.37.6.