As the title suggests, I have to restart alsa everytime I restart the computer. Obviously that's pretty annoying.
So once restart I normally do:
Code:
sudo alsa force-restart
It will then give me a few warnings (see screenshot 2) and then unload and reload all the drivers and everything works fine.
I notice that each time I boot my computer, under the playback section of the ALSA Mixer the 'Speaker' volume control is turned all the way down. Even when I return it to the proper level, and then restart my computer later, the slider for 'Speaker' seems to default back to the previous state mentioned above. Is there a way to set the default for the ALSA mixer in a .conf file of some sort so that the default setting for 'Speaker' is always at max?
View 4 Replies View RelatedI'm having a rather peculiar problem with sound in Ubuntu 10.04. Specifically, every time I reboot I run through a cycle of sorts:
A). Sound is working fine. Reboot
B). No sound. "aplay -l" returns "no card found". Additionally, the hibernate and suspend buttons are missing from the shutdown menu and restart acts as log out, immediately returning me to the log in screen (sudo reboot in console works). I try to fix the problem by the following commands:
Code:
$sudo apt-get --purge remove linux-sound-base alsa-base alsa-utils
$sudo apt-get install linux-sound-base alsa-base alsa-utils
$sudo reboot
C). After rebooting sound works normally again and I get the following:
Code:
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: VT1828S Analog [VT1828S Analog]
Subdevices: 2/2
[code]...
I have "linux-backports-modules-alsa-lucid-generic" installed. I have been experiencing problems with audio since I bought this M/B, but with 9.10 things were stable and with my previous 10.04 installation bearable. Now, however, I practically can't work. I have to run the aforementioned routine every time I reboot. Additionally, I don't if it is relevant, but the problems started after I installed the audio drivers in Windows (another royal mess, but at least now it's stable and it works)
I have a weird problem. When I restart/reboot, the computer restarts (I see the BIOS, Grub, etc., sequences) and goes right back into my desktop session - no login required. This is not the behavior I want.How can I make it reboot to the login screen?I'm running Ubuntu 10.10 Maverick
View 2 Replies View Relatedrunning Ubuntu 10.10, generally with no probs. After the upgrade to 10.10, and several updates, I still have a problem. Namely when ever I re-boot, which now more often than I'd like, due to a machine failure. It starts, but accross the network can't "see" tux, pop to root term, and
Quote:
root@tux:~# stop smbd
smbd stop/waiting
root@tux:~# start smbd
smbd start/running, process 3682
and that fixes it. Whats wrong with the startup script?
Any time i try to start my computer from a cold state (off for 1+ hours), the first time i start it, it hangs and requires a SYSREQ reboot to restart it. When it hangs, all the window decorations disappear and the background vanishes. The main menu opens, but click on things does nothing. clicking shutdown only brings up the normal shutdown window with the text replaced with squares.
Thought it was my hdd (i/o errors and for some reason the HDD remounts r/o at this point), but e2fsck shows no issue.
Thought it may be an IRQ conflict, so i enabled MSI on all my PCI Devices.
Thought it was the 'green' aspect of my WD Drive, so i set the spindown time to 5 hours using hdparm config file. startup messages printed to screen confirm it is working.
Also, due to the numerous hard resets, the system is detecting a 'previous i/o error to the superblock'. Should recovering the SB from a backup be beneficial?
I have a little problem when I restart my computer, the keyboard layout restart and get back to the default USA keyboard. Even if I delete it it's still back after the reboot. Maybe there a file that I can edit to get my default Canada setting to stay.Also, another problem that have been discussed thousand time before, I tried to add a drive to fstab without success, here what my fstab look like:Quote:
#
# /etc/fstab
# Created by anaconda on Sat Nov 21 13:02:07 2009
[code]...
Come across with a situation where all methods of shutdown result in a restart/reboot? I've tried commands:
- shutdown
- halt
- poweroff
.. with various parameters, nothing works. The laptop seems to power off, but after a sec it restarts/reboots. I've Googled high and low, but there's very little on this topic. Maybe it is specific to the current kernel in Wheezy? I'm not suspecting a harware failure, since this was not happening with Windows installed.
This happens on me with Wheezy on a HP Elitebook 8530w.
I had been manually starting my wireless network with "sudo iwconfig wlan0 essid "my wireless router id". The network would start and work flawlessly for weeks at a time. I can't ask my wife to find the essid in the terminal and then start wireless manually when I'm not here. She hates and fears the terminal. So I downloaded gnome network manager for a point and click interface on gnome panel.The network would start fine but shut down after anywhere from one to six hours. It would then refuse to restart manually or otherwise. I completely uninstalled network manager and tried wicd instead. The same basic problem is happening. The network will restart if I reboot the computer. My system:
Desktop computer acting as proxy server for the internet. Internet connection is by a dial up modem. This computer uses a wireless pci card connected to a dedicated hub. This is for file sharing via nfs. The OS is ubuntu 9.10. My wife's computer sharing the internet using a proxy to my computer. File sharing via nfs and a wireless card. Also running ubuntu 9.10. This same basic system worked flawlessly under Ubuntu Hardy.My desktop was updated recently with new hardware which created the need to move to Ubuntu Karmic. Some hardware was too new for hardy to deal with.
I am having slight issue with setting up file sharing. I have a windows 7 pc and hp proliant microserver running. I have a raid array which I am using as a share for storing music, pictures etc. When I reboot the debian server I can't connect to the server from the windows 7 PC (I have mapped a network drive) until I go on to the server and restart samba with /etc/init.d/samba restart - then everything works fine. I can ping the server with both ip and hostname but the network drive does not connect - this is straight after a reboot. Is the /etc/init.d/samba restart doing something differently to when the server boots? I have read several posts relating to printer sharing issues which point to samba not starting before cups so I am wondering if samba is starting before some of the relevant networking services.
View 2 Replies View RelatedI added a whole slew of apps to my favorites and lost the 'Shutdown' option...every time I try to shutdown in the Terminal I am told I must be logged in as Root to do so...I can't figure out how to do this I'm a newbie to Linux but a CNE 5 -haven't used it 10 years- an MCP and A+ certified I've searched local help and SuSe's site and I can't find anythingI've only spent a couple of hrs on this and have had SuSe 11.2 installed since last Sunday
View 9 Replies View RelatedI'm using RHEL 5 with the Enhanced Security. Using the suggest NISPOM Red Hat documented settings (located on the system; copy - paste) I have managed to audit failed file open accesses however, this setting only retained if I enter it at the command line (/sbin/auditctl -a ). If I reboot the system or restart the service all my -a (not -w) located in the /etc/audit/audit.rules are not retained.
View 6 Replies View RelatedWhen I set up Twin View in the nVidia config tool (as either a regular user or as root), it only lasts until I log out and log back in (i.e. restart x) or until I restart the machine. In either case once I get to the log in splash screen again, it is only operating on one monitor, and when I log in I have to reconfigure in order to get Twin View back. How can I get the configuration to stay?
More info below:
I just installed opensuse 11.2 on an AMD 64 bit 3800. It has an nVidia GeForce 7600 GS card. I installed the nVidia driver no problem and can access the nVidia config app as a regular user or as root. Both access via KDE run level 5. That is, in a GUI desktop environment. I set up Twin View fine (it is kind of clunky process, but it does recognize my monitor resolutions fine) and click apply and I get the twin view I want. I clicked on save x config but all it does is bring up a file save dialog with a 'browse' button. Isn't this supposed to automatically know where the X config file is and update it? If it isn't, what file am I supposed to look for to save over? I looked in /etc/X11 and only found the following files:
./rstart/config
./xdm/xdm-config
./xdm/SuSEconfig.xdm
./fs/config
./proxymngr/pmconfig
I have a 10x2tb disk array that i'm trying to build into a single software raid 5 i have tried this 2 times now the first it made it to 58.7% and the machine locked up and the array would not restart after a reboot. On my 2nd try all was looking good until about 50% i noticed that the speed dropped in 1/2 and that ksoftirqd/2 is taking up a lot of cpu (about 90%) the md0_resync and md0_raid5 are also taking 60-90% when the build started they took 7%. when i do a dmesg i see a lot of the message compute_blocknr: map not correct.
For a little info on the physical setup this is running on an Atom 510 with 2GB of mem the drives are connected to an addonics 4-Port RAID 5 / JBOD SATA II PCI Controller using the sil3124 chipset. I'm using 2 addonics 5X1 SATA Port Multiplier connected to the controller to get the 10 drives attached. All drive show up and don't seem to have any issues. I'm running a fully updated as of 3/20/10 version of centos 5.4
I will let this continue to run over night but i expect it to be locked up by morning if it follows what the last attempt did.
I have recently been forced to do a hardware upgrade (my previous mobo died). Now, sounds works ok with,amarok because kde has recognized the new hardware and switched to it.
..... does not work, likely because flash uses alsa-oss which is probably not configured automatically. I have tried uninstalling and reinstalling both alsa-oss and flash, but it didn't solve the problem.
I have just finished the upgrade of the latest version and I'm at the point of my system restating.
My system automatically tried to restart but on the restart I got the 'terminal' view. It stopped when asking for my username (it never normally asks for this before the grub menu) and then password. I didn't get any further than that.
I now have on my screen (still in the terminal view before the grub menu)
"name@name-desktop:...$ "
I'm on my phone now so I don't actually have the symbol for before the dollar sign but your know what it is. The raised S on a 90 degree angle.
I'm trying to update ALSA, following the instructions here: SDB:Alsa-update - openSUSE.I'm not sure how to proceed at STEP THREE. There are two sets of instructions, based on whether or not the kernel has been updated. I'm not sure if it has been. How can I make sure?
View 2 Replies View RelatedI have a suspend problem in my laptop. Sometimes, when resuming from suspend, the network adapter is down (that is, the network does not work and the light of the network adapter is off). Restarting the network service doesn't work, because I think that the system forgot about the hardware, and probably the driver should be reloaded.Does anyone knows how to do that?(ps. /etc/init.d/networking restart does not work, because the hardware driver is not being recognized anymore).
View 5 Replies View Relatedi have installed dhcp,there i declared the subnet and network,i used command include "/etc/dhcpd.conf.jutu1"; to start and other files, but it show me this error when i want to restart the DHCP, if you need more information contact me, i have configured this file too jutu1, but it don't let me to restart dhcp from /etc/init.d/dhcpd restart, this show me this message
[Code]..
Whenever I choose "Restart" from the GDM screen, GDM appears to shutdown, and the first TTY is displayed with a login prompt at the bottom (assuming I haven't used that TTY). I am by no estimation a patient individual, but I waited a solid minute or two for something to happen, but nothing ever did. I end up logging in as root on that TTY and running "shutdown -r now" to get the job done. This is a shared computer, and ideally any user should be able to perform shutdown options graphically from GDM.The only mentioned workaround doesn't apply to me as I am using the nvidia driver, not intel.
View 1 Replies View RelatedI'm working with Linux 2.6.23 on an embedded device and am receiving the following error executing the reboot command.
View 2 Replies View RelatedI am using sda1 as /, which is a bootable drive. I do not know if my problem is that I did not create a /boot drive. After removing the iso dvd, I tried to reboot and I get this back: -bash: /sbin/reboot: input/output error Then it returns me to the terminal prompt.
View 6 Replies View Relatedwhats the difference between restarting/stopping apache using 'service httpd restart/stop' and apachectl restart/stop. I know that using 'service httpd restart' is actually a script in /etc/init.d/httpd but what about apachectl?
View 1 Replies View Relatedlast -a shows server rebooted, how to identify the source or cause of reboot? thx reboot system boot Wed Feb 16 08:52 (02:0 2.6.21.7-2.fc8xen
View 2 Replies View RelatedIt seems any program that uses ALSA the sound wont work. Pulse seems to work fine. Is there any way to correct this?
View 3 Replies View RelatedI was just wondering if there was a way to use ALSA without PULSE, PULSE AUDIO is causing my Skype to crash continually.
I entered the following command into terminal- sudo apt-get remove --purge pulse-audio
Now my system has no sound at all, soundcards are detected in aplay -l, but unfortunately when i go to sound properties it just says waiting for sound system to respond.
I'm using XFCE with pulseaudio. I don't have a keyboard with dedicated multimedia keys. Getting to alsa to work with f1 f2 and f3 (mute, volume down, volume up) was easy. I want to use pulseaudio instead of alsa. What do I use for mute, volume up and down?
View 1 Replies View RelatedI'm currently using Ubuntu 9.10 and since I've installed it, I don't have any sounds at all. Sounds work fine on windows. My version of alsa is 1.0.21. I made sure that I've got nothing muted in alsa mixer and it seems that ubuntu detects my sound card.
Card is HDA ATI SB
Chip: IDT 92HD75B2X5
Having had many problems with pulseaudio on a fresh karmic install, I followed some recommended instructions for removing pulse and using alsa (URL...). unfortunately, both pulse and alsa have gone and i'm left with oss which seems to work fine. I'd like to have alsa back though.When I open amarok, it plays the frst song on the playlist then pops up a series of 'could not initialise sound engine' messages, and crashes.
View 5 Replies View RelatedI was following the instruction in this link [URL] and while trying to stop the current version by
sudo /etc/init.d/alsa-utils stop
as it mentioned in the previous link , but it's not working i always get command not found.