I need to know how to repair ubuntu. I don't want to reinstall it. I want current version keep working. Is it possible?
I know that i need to remove recently installed program but how can i do that if ubuntu doesn't start. Even in recovery mode.
I installed nagios program from tar.gz file (from source basically). I didn't use dpkg or apt-get, I used 'configure','make install' and then 'make' scripts. How can I remove this progrma from debian system ?
View 2 Replies View Relatedas much as i am one for saving space and throwing out the trash. now my problem is the fact that I DO NOT WANT THIS program (localepurge) running on my system. i look and did everything i could. note : i am a noobie. when i config the program from the start i told it NO don't delete anything. and now that i have done some reading i do not want it working period. i could not find a way to disable or uninstall localepurge.
View 4 Replies View RelatedWell I have installed Wine for the propose of running easyphp program which can be found at [URL]... I installed it on my windows machine and like it. I want to run it on this machine because I have it hooked up to my tv and I have a wireless mouse and keyboard so I can program or whatever from the bed. Anyways, I need to remove the stuff I installed though this tread. [URL]... The reason for removing the installed stuff is because I believe it is occupying port 80 which I need open for easyphp. How do I uninstall this stuff I installed?
View 1 Replies View RelatedUsing Ubuntu Lucid with Gnome desktop.I was just playing around trying to find a media player I liked and installed Bangarang via the Software Centre. This took an absolute age and now I realise why - it has basically installed the entire KDE environment and associated lib packages as well.I have found /var/ log/ dpkg.log shows what has been installed and of course I can wade through that to make a list of all the packages and uninstall them all via Synaptic. But that will take a long time to do.
Is there anyway to somehow automate rolling back any package changes since a certain time?I've checked the man for dpkg and I can't see any mention of anything like this.
about 6 months ago I installed Ubuntu because my Windows XP had been partially corrupted and was screwing up. One month ago I formated the drive XP was on and installed Windows 7 Home Premium 64bit on it; I couldn't dual boot so I looked online, found EasyBCD 2.0, installed it, and from what I can tell, I need GRUB on my Ubuntu side to be able to boot it, before this I didn't even know what GRUB was.
View 6 Replies View RelatedHow to find the package that was installed recently or at the last? Is there any command to find this? in RHEL 5.0
View 1 Replies View RelatedI did recently install aria2 and everything installed smoothly. but i am not able to locate it. I know it will be in the applications->internet but its not there.
View 7 Replies View RelatedRecently I have installed DockbarX and Cardapio. After installation they are supposed to be found in the Add to Panel items, but both of them are not there.I can run them directly without any problem. Is there anything else I should do manually? I have tried pkill gnome-panel to restart the panel as well.
View 9 Replies View RelatedI am new to fedora and installed wine to see if I could get the sony reader software working (required to access sony bookstore from my sony ereader). Well the program did not work though it did create icons on my desktop. wine kept crashing and I said lets just get rid of it. I uninstalled wine via yum remove and nothing appeared to happen so I did rpm -qa |grep wine and saw lots of stuff. So I simply did yum remove wine* and then a rpm -qa |grep wine was empty. however wine is still under applications on my desktop and still has a category for programs--reader. I should also mention that while wine was installed I attempted to remove the reader via the wine uninstalller but a) wine gave a message of a core crash and b) all the uninstaller did was give me the option to reinstall the reader program. so now when I attempt to open an epub it tries with the sony reader software. I know I can just right click to use another program but for now I want wine gone completely from my pc and the sony program gone.
View 2 Replies View RelatedOne of my objections is the "recently installed" list at the top of the menu (I use the CLASSIC one-column style as opposed to the box version with multiple "tabs"). I often install 5-10 or more applications at one time and do NOT want a long list of programs popping up. Is there any way to at least clear this list? Disabling it would be even better, if anyone can tell me how to do that.While I have other aesthetic complaints, I have seen at least partial solutions to some of my other ones but this one I haven't seen anywhere.I have read it only stays there for a few days, but it is still annoying to have that long list. Also, if I ever set a friend up with our favorite OS they would have a list of around 50 programs sitting there and that looks really cluttered.
View 3 Replies View RelatedI wanted to check what version of GRUB I have installed. I went to terminal and typed grub --versionI got this message back: The program 'grub' is currently not installed. You can install it by typing: sudo apt-get install grub
I am running Ubuntu 10.10 alongside windows xp pro. When I turn my pc on I have the option to boot to ubuntu or xp and at the top of the window it says that the version of grub running is "GNU GRUB Version 1.98+20100804-5Ubuntu-3" how I shold go about installing GRUB 2 or just leave it as is.
How to remove a program by the command
Code:
./configure
make
sudo make install
installed?
My emacs editor is messed up so I tried to remove it via synaptic. It gave me an error and exited. Is there any way to manually remove that data so I can freshly re-install my favorite editor?
View 5 Replies View RelatedI'm traying to remove several program, sucha as transmission, bunshee and other, I can't unistall them from the console by typing sudo apt-get remove ***, neither trhough synaptic, neither thru ubuntu softare center... each time I try to unistall I got the message that its being unistall but after it I open the softare just if like its properly installed.
View 2 Replies View RelatedInstalled azureus vuze from the terminal. Im not thrilled with it and want to remove it.I used the comand sudo apt-get remove azureus and Code: sudo apt-get remove vuze it then listed a buch of files no longer needed so I erased them as well. The program is still there and operational. I tried the above again and it says that they dont exsist. I even looked for them in synaptic and the software center with no luck but I expected that. What am I missing?
View 1 Replies View RelatedI've just been playing with the whereis command. For a program installed with synaptic package manager or comes preinstalled, whereis finds the path to the program. These programs in applications menu or startup applications don't need directory information, somehow linux must have them in some kind of a directory or something. For a program extracted from a .bz file, linux has no idea where the program is and I must give directory information. So how does linux find programs that are installed normally? It can't just search through files, that would seem to be slow. Is there a table or directory where program location is stored?
View 1 Replies View RelatedI recently installed Acetone ISO in the hopes of installing a program, but alas it doesn't do what I need it to (run the MDF file like a disk rather than showing all the files in it, and because this is a multi-disk thing I'm installing I'm kinda stuck now) and I noticed it would make a new virtual drive every time I mounted an image, and I wound up with four of them, and each one had its own shortcut on my desktop. Well, I removed the program and deleted the folder it created, but these shortcuts are still on my desktop. And they are UNTOUCHABLE!
The command line ls -al ~/Desktop/ will show everything on the desktop BUT THEM, they have no permissions, and cannot be moved, copied, or deleted, because Ubuntu can't find volume information on them. I reinstalled the program to see if anything would help, and I noticed that the drives would go away if I unmounted the image (I coulda sworn I told it to before, but it didn't want to...) but now these drives are errors to the program, and I still can't remove the shortcuts.
How the reverse [apt-get install] for remove a program.
View 1 Replies View RelatedI searched for a hex editor in the USC, and chose to install a package called okteta. Only problem is...(I didn't realize until after it was too late to cancel)...it's a KDE package.Since it was probably one of the first (only?) KDE based app on this fresh Lucid installation, I believe about 115 (!) packages (see the list below) were installed in addition to the one I wanted. Grrrr.I then went into synaptic and removed okteta, but as I should have known, it did not remove any of the dependencies.I then looked at the dpkg logfile to see what had been installed. Here's what I found:Quote:
2010-05-18 02:27:56 install libqtcore4 <none> 4:4.6.2-0ubuntu5
2010-05-18 02:27:58 install libattica0 <none> 0.1.3-0ubuntu1
2010-05-18 02:27:58 install libqt4-network <none> 4:4.6.2-0ubuntu5
[code]....
Toshiba Satellite laptop, Ubuntu 10.04lts
I installed qcad earlier today, using Software Center. Qcad didn't show up anywhere in the Applications dropdown menu. When I was running 9.04, it showed up in the Graphics sub-menu, but it's nowhere. Rebooted, nothing. It shows up as installed in the Synaptic Package Manager, but I went ahead and removed and installed it again, rebooting between each operation. (sigh) Still nothing. Now, I'm sure it's in here, but I can't find it. So, I have three questions:
1. How do I start it (or any program) using command line?
2. How do I find it using my Gnome gui, and put it in the applications menu
and
3. Generally, is there a guide that will explain what I'm looking at when I open my File System directory?
I'm looking for a program to remove songs I downloaded more than once. They're all tagged differently, and some are of varying sizes/lengths/types.
View 1 Replies View RelatedI attempted to install the CLI management tool for my Highpoint Rocket Raid card (rr62x) downloaded from this page: [URL] When I tried installing it, this is what happens:
Code:
# dpkg -i hptraidconf_3.5_amd64.deb
Selecting previously deselected package hptraidconf.
(Reading database ... 68853 files and directories currently installed.)
[code]....
How can I get this package removed? I was able to get a different management tool installed to configure my RAID so I don't need this one. My system appears to be working, but everytime I use apt-get to install something else, it shows the hptraidconf package as failed.
We all know that we can remove installed applications straight from terminal or ubuntu software center. However, sometimes we download .deb files from the web that are not necessarily on the repository. My question is, how do I uninstall a manually installed deb application?
View 9 Replies View RelatedRunning 10.10 64bit
I tried installing the latest Mupen64Plus from source, and something went wrong, and now I get errors when trying to run it. How do I remove the link that was created from the source install?
This is what I get code...
I had a dual boot system (Ubuntu 10.04 and XP) and had a problem with my XP and had to reinstall it. Unfortunately I forgot to backup the boot file. After the re-installation of XP, I can't load Ubuntu 10.04 anymore, so I booted up Ubuntu 10.10 using USB, during the install, it didn't give an option to do a repair, so I did an install along with other OS. After the install, the GRUB showed now 3 OS:
Ubuntu 10.10
Win XP
Ubuntu 10.04
How can I remove the newly installed Ubuntu 10.10 without damaging the other OS? I'd like to keep the 10.04 because it's all customized and have several apps already installed.
Anyone know of a good program to remove everything on a hardrive?
View 7 Replies View RelatedHere is what I am wanting to do:Whenever a program is installed - send an email with the program name.
View 3 Replies View RelatedIs it possible to run a program installed on a remote Ubuntu PC on the local PC? What I'm talking about is different from simply sending the GUI over the network (like X tunelling). I want the program to use the processor of the local machine. Is this possible?
(Here's an example. PC 1 has a fast processor. PC2 has gimp installed on it but has a slow processor. Can PC2 make GIMP run on PC1's processor over the network?)
