Ubuntu :: Rcovering Files From Broken Install?
Mar 22, 2011
was attepting a boot loop fix when my ubuntu froze half way through uninstalling gnome, I am unable to boot in any mode from the grub and get errors about failing to load duv or sys or something of the kind, I cannot reach any command line either...Now if I boot in a live cd my hdd is visible but I cannot mount it, no problem mounting a windows drive but the ubuntu one will now I get many errors such as a job is pending and others that are similar, I have tried last night for 5hours (not an exagguration) many solutions to get it mounted.
If I boot the windows hdd the ubuntu drive does not display in my computer and.I have the cable and jumpers set correctly.Basically I cannot view what is on the drive at all, I'm wondering is there anyway to copy the drive to another hdd or usb other than what I have done, or could you suggest something to make one of these methods work?Thanks a lot, I need to get some very important files back from the drive, and from now on I will backup A LOT!
View 9 Replies
ADVERTISEMENT
Feb 3, 2010
I installed Ubuntu 9.10 on a 100 GB partition of my 120 GB hard disk. I left the other 20 GB as free space. I moved my data (about 20 GB) to my home folder. Everything was fine for two days. Then I installed a few packages with the help of Update Manager.he installation, I was asked to reboot. Upon reboot, I was always taken to the Memtest86+. It was as if GRUB wasn't detecting my ubuntu installation.Then I installed Ubuntu again by taking up 20 GB of the existing 100GB partition. I am currently using this installation. When I try to access the older installation (the 80 GB one), I find that all my data in my home folder is broken. (screenshot attached - homefolderbroken.png). homefolderbroken.jpgWhen I see the properties of the 80GB partition, I can find my data is still present (screenshot attached - data.png
View 2 Replies
View Related
Apr 1, 2010
first of i'm a total noob at Linux / Ubuntu but i still want to learn more about it and stop being a windfag .Anyhow. i first of installed Ubuntu 9.10 and then updated to Ubuntu 10.(04?). and everything was running smooth and good. but when i started my com the next day i got some broken files that was broken. I thought "Okey.. I'll just go to the "Broken Fixer" and get it over with" and i went in to the broken fixer and like marked all and everything stared to update. i went of and got me some coffee and got back to my comp and got this error.
Code:
E: /var/cache/apt/archives/ia32-libs_2.7ubuntu21_amd64.deb: subprocess dpkg-deb --control returned error exit status 2
[code]...
View 4 Replies
View Related
Dec 5, 2014
The usual answer is debian's ldd(1) and I found broken things due to past lib abuses I previously hadn't understood I'd did - or rather hadn't realized because by looking it "looked ok and worked" - but i had problems. many i fixed.
After I ran a new script: it showed some i'd STILL missed after carefully re-doing /lib by hand (and using /var/lib/dpkg/info/libs.list)
I just made something that might be nice. seems to be the only thing that does it. but its' small and quick and has (tty/stdout) output still.
the had part isn't finding info, objdump(1) does that wonderfully : it's using it..
View 4 Replies
View Related
Jan 11, 2010
So im trying to un rar my rar. files. I use 7-zip, and winrar, Every time i try to unrar them it says broken file, cannot open file. This happens to nearly most of my rar files in the last few weeks, idk what else to do,
View 3 Replies
View Related
May 26, 2010
I run BIND9 in Debian on my server, and did a dist-upgrade last night. Prior to the dist-upgrade, everything worked fine. It does not appear that any of the configuration or zone files were changed. Right now, I am seeing ServFail replies to the A queries:
Code:
13:00:26.496391 IP 10.7.21.12.45956 > 10.7.7.2.53: 39290+ A? int0x80.com. (29)
0x0000: 4500 0039 603c 4000 4011 aa5c 0a07 150c E..9`<@.@......
[code]....
View 2 Replies
View Related
Feb 22, 2011
I run a dedicated opensuse 11.1 server with apache (2.2.10-2.9.1) installed. This box has been running for nearly 2 years hosting several low traffic websites. I must admit that I did not give lots of love/attention to the machine over that period. It ran rock solid. The different websites each have their own associated user account and are stored in their own /home/name/public_html/ folder. It was setup through Webmin. Each domain name is also linked to a unique IP (the box has multiple available IPs), however this is configured at my domain provider. All in all a very simple and straightforward setup that never let me down most of the past decade.
Recently the sites on the machine were no longer responding. This happens each other year or so since I write my logfiles to a separate partition. Was df -h and indeed, partition was full. Removed logfiles manually, and while I was at it I decided it was time to run an online update (yast2 / online update that is). Rebooted machine after yast telling me to do so. Sites are no longer working. Can no longer login to webmin. Only thing what works is the 'root' webpage (/srv/www/htdocs folder), which makes me rather clueless as the other sites are just not responding at all, not even a timeout or error message.While I know that deleting logfiles manually is quite stupid, I've done it fore and not really ended up in trouble.
Hence my questions: does this sound familiar to anyone and do you mind to give me a clue about where exactly I should start to look. It's been ages since I actually administrated apache, so I might overlook the obvious. Long story short: any tips are very welcome about what I should check first, what config files might have been changedith the update, etc ...
View 1 Replies
View Related
Jan 16, 2011
I've multiple jpegs uploaded form IP cam via FTP, I use mencoder to periodically pack them into single avi file, problem is that sometimes one or two jpegs submitted by cam are broken, and this make mencoder exit, without producing movie
View 1 Replies
View Related
May 26, 2011
Today encoders are getting smarter. They can compress Blu ray similar quality in 700MB. It seems header of video file contain info about frame rate, audio/video encoder etc. which can't be guessed. In MPEG audio , every part of file is independently playable. If a movie is binary split into 6 parts & I don't have the first part then it is unplayable.
Code:
example
ls
-rwxrwxrwx 1 root root 280M 2010-12-07 20:23 irn2-cd1.mkv
-rwxrwxrwx 1 root root 50M 2011-05-26 13:09 last-50M-cd2
-rwxrwxrwx 1 root root 50M 2011-05-26 13:44 first-50M-cd1
file *
first-50M-cd1: Matroska data
last-50M-cd2: data
irn2-cd1.mkv: Matroska data
View 1 Replies
View Related
May 29, 2011
I had recently installed the kernel sources so that I could compile the VirtualBox kernel module to use well but I had not restarted afterwards. I had been using my system problem free until tonight when I decided to restart. I had no internet connection and through ifconfig showing only lo and ifup eth0 returning "device eth0 is not accessible", I discovered I had a bigger problem than at first thought. Then I discovered that no PCI devices other than video were working, and so I referred to /var/log/messages and discoverd a line stating that "/lib/modules/2.6.37.6-0.5-desktop/modules.dep : no such file or directory.
All other entries in that directory were some version of 2.6.37.1-1.2.
Unfortunately I had to end up reinstalling because witho
View 4 Replies
View Related
Jul 23, 2011
I installed Fedora 15 on top of Ubuntu 11.04 (running in Classic mode, not Unity). First, Fedora took over grub completely and ubuntu disappeared. I tried to restore the Ubuntu option in the fedora grub. It worked (and I also restored ubuntu's own grub later on -with the same result as I'm about to describe), but I still can't log into Ubuntu, because when I choose Ubuntu at boot, and enter my password, it refreshes the same gdm screen as if nothing happened. In the meanwhile, there is an error about gnome power settings at the top right corner, and the gdm screen also looks different than it used to when I had everything intact.
The error reads "Install problem! The configuration defaults for GNOME Power Manager have not been installed correctly. Please contact your computer administrator."
View 9 Replies
View Related
May 21, 2010
i'm running debian lenny - latest stable i have recently installed smartcam (mobile phone as webcam over bluetooth) from .deb package , get errors of unmet dependency , but application works like a charm, unfortunately broken dependences block my aptitude , i cant fix them either as latest stable use older versions of dependences even in backports... how do i mark smartcam package as not broken and release my apt?
View 8 Replies
View Related
Dec 14, 2010
wanted to install UNR 10.04 proper, dropping WUBI. I figured I'd move my home folder and installed apps from wubi to the regular partition from inside the wubi install, after installing UNR and it's bootloader on a partition.The Wubi install no longer works, trying to boot it hangs at mounting a no longer existant logical partition. That partition used to be ntfs storage, now becoming the proper UNR partition.Wubi's Grub actually says it's not a NTFS partition anymore and hangs there.Would reinstalling Wubi from Windows (keeping the disks folder) solve anything?Is there anything I can do from Wubi Grub's command line?
View 7 Replies
View Related
Apr 30, 2011
I've just spent the longest afternoon trying to get Natty command line install to work. Okay lets list the problems first:Alsa not working so no soundUser privileges messed upWireless doesn't work Realtek rtl8192cu previously worked under 10.04 and 10.10Initial boot left me with a blank screen. I had to boot to grub and use the root console to install xdm which I normally don't use. I also had to install Openbox and some basic utilities from root console just to get a desktop.I've been doing command line install since 8.04 and have never had so many problems.
View 3 Replies
View Related
Jun 27, 2011
On my new installation of 10.04 on a Toshiba A30, I'm trying to install EMC2, using an installer file downloaded from linuxcnc.org. At the end of the process, I get the error message below after trying to fix the broken package with package manager.
E:/var/cache/apt/archives/rtai-modules-2.6.32-122-rtai_3.8.1-linuxcnc1_i386.deb: trying to overwrite '/etc/udev/rules.d/99-rtai.rules', which is also in package rtai-modules-2.6.24-16-rtai 0
get past this problem ?
Is it as simple as removing the rtai-modules-2.6.24-16-rtai 0 package ? Do I need this one ? Is it replaced by the newer one, the rtai-modules-2.6.32-122-rtai_3.8.1 ?
View 2 Replies
View Related
Aug 20, 2010
How can I either fix or uninstall a broken Firefox 3.6.9 install. The install gets all the way through until it syops at "setting up firefox: Setting up firefox (3.6.9~hg20100817r34537+nobinonly-0ubuntu1~umd2~lucid) ... then it stops forever and now I can't find or install any updates at all. It tells me to fix by running: sudo dpkg --configure -a and around and around we go!
View 5 Replies
View Related
Mar 25, 2011
I did a very noobish thing and broke my 10.04 installation and need help to pull it back from the brink. I began an install of LAMP using tasksel. Ignorantly I unchecked two pre selected packages - ubuntu desktop and a print related one whose name I can't recall. During the install I noticed that the installer was merrily uninstalling a whole bunch of stuff. Read later that if you uncheck the preselected options it actually uninstalls them. Perfect. Second foolish action was that in a panic to stop what I thought was a total wipe of my ubuntu installation, I just turned off the computer.
on bootup it first just hung with a black screen. Tried to repair with a live CD but got an 'unrecoverable error' message. Managed to get a bit of life with purging then reinstalling ubuntu-desktop but still hangs on bootup showing the ubuntu symbol and progress bar. So I have accessed via a Grub2 disk and logged in, in a 'low graphics' mode - actually no graphics. am using aptitude to see what the state of things is, but can't get a connection to any repositories. 'Temporary failture resolving '[URL]...etc with [ERROR] Have had a look at /ect/apat/sources.list and it's still all there. But I am basically stumped as to what to do next. Pretty sure most things are still there. And really don't want to do a fresh install. So actually what i need to do is sort out why I don't have a connection anymore.
View 4 Replies
View Related
Apr 16, 2011
I have Ktorrent installed via the repositories and its always worked perfectly. Today I ran software update with KPackageKit and it installed updates. It told me that KTorrent had to be removed to continue and without thinking I hit ok. Now my KTorrent is gone. When I try to install it on the terminal with
Code:
sudo apt-get install ktorrent
it gives me this error.
Code:
$ sudo apt-get install ktorrent
Reading package lists... Done
Building dependency tree
Reading state information... Done
[code]...
The following packages have unmet dependencies:
ktorrent : Depends: ktorrent-data (= 4.0.3-0ubuntu1) but 4.0.5-3ubuntu1~maverick1~ppa1 is to be installed
E: Broken packages If I remove and reinstall ktorrent-data it doesn't help. build-dep doesn't help. autoremove and then trying to reinstall doesn't help. I'm not running some strange dev version of anything. I have a standard Kubuntu 10.10 amd64 installation and my KDE version is 4.6.2 from the regular repositories. I run updates (standard repositories) almost every day and have never seen anything like this before.
View 8 Replies
View Related
Apr 23, 2011
I want to install aptitude using apt-get, but some problems happen like this:
The following packages have unmet dependencies:
aptitude : Depends: libapt-pkg-libc6.10-6-4.8
Depends: libept0 (>= 0.5.30) but it is not going to be installed
E: Broken packages
(before do this, I have used command apt-get update and apt-get upgrade)
View 6 Replies
View Related
May 19, 2011
I attempted to install openemr which was taking its sweet time to install it was most of the way through but I had to leave so I left my computer running. Computer when I came back was asleep I started back up and tried installing something from software manager and I got this message from it:
E: I wasn't able to locate file for the openemr package. This might mean you need to manually fix this package.: I tried fixing from synaptic but even synaptic is complaining.
View 7 Replies
View Related
Jun 6, 2011
I am Maverick user. After installing kde desktop my font in LibreOffice, Chrome, and some application goes to umsmooth and broken.
This is the preview
But if I create a new user, fonts are normal
View 3 Replies
View Related
Jul 19, 2011
My laptop runs really hot and after reading a few threads around the forum I came across one that said it was because of the fact that ubuntu comes with an open source driver.All you have to do is update to the proprietary driver and everything is fixed. So I went to the menu and looked for the driver. I honestly didn't check if the one that was found was compatible with my graphics card, I just assumed that the one that it found was the right one. I installed it and restarted and ubuntu wouldn't load. It goes through the initial load but when it comes time to bring up the login page, it stays black and never advances. I assumed that this was a result of an incorrect driver. Again, I turned to the forums and found that other people had this problem. So I grabbed my trusty live CD and tried to load up a live session and remove the config file that points to the driverThe live CD wouldn't load. Same thing for recovery mode. It gets to a certain point and stops. This link is an image to where the boot stops:
View 3 Replies
View Related
Jul 11, 2010
Whenever I try to install an .rpm by double-clicking on it, a window comes up with this error:
'The name org.freedesktop.PackageKit was not provided by any .service files'
There is a file called org.freedesktop.PackageKit.service in /usr/share/dbus-1/system-services, so I know that it exists. Why can't dbus find it?
Running openSuSE 11.2 with GNOME.
View 2 Replies
View Related
Dec 20, 2010
Disk 1 of my software Linux-raid mirror failed but not before breaking my OpenSuSE 11.1 (KDE 3.5) domU. Dom0 is also 11.1 and is working fine. I have another domU running a Novell fileserver and I think that is OK too.
Both domU systems have dedicated mirrored partitions and it seems the OpenSuSE guest was sitting on some sectors which went bad. The drive is on its way back to Seagate for replacement under warranty and the rest of the system is plugging along on the remaining 750GB Disk 0.
I want to somehow repair SuSE 11.1. The symptoms are that I cannot VNC into it remotely and can only get in via the dom0 virtual manager in YAST. It won't let me use the partition manager via YAST. It also randomly drops the vnc connection with dom0. YAST won't let me manage software either.
Putting the original DVD in the drive and rebooting doesn't do anything for domU guests. It is only visible to dom0.
I don't want to blow the whole thing away and start again anyway.
Is there any way to do an online repair via the shell?
View 1 Replies
View Related
Mar 16, 2010
Is the ubuntu keyserver broken? I am trying to install a package and every time I try to install the key I get a time out error.
apt-update give me
Code:
W: GPG error: [URL karmic Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 932062C9CD30EE56
Then if I try to install the key I get this?
Code:
sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys CD30EE56
Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /etc/apt/secring.gpg --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --keyserver keyserver.ubuntu.com --recv-keys CD30EE56
gpg: requesting key CD30EE56 from hkp server keyserver.ubuntu.com
gpg: keyserver timed out
gpg: keyserver receive failed: keyserver error
Can I tell ubuntu not to bother with the key. I know the package is good and safe to install. I should be the one to judge if its ok to install not ubuntu.
View 1 Replies
View Related
Jun 27, 2010
I recently installed Ubuntu Lucid on my sisters laptop and it will now no longer boot into Windows Vista.
When Vista is selected, the loading bar is briefly displayed before the screen turns black and returns to GRUB.
EDIT : More specifically, first a long bar is displayed at the bottom of the screen that says something like 'loading windows files' above it. Then the standard vista loading bar, with (c) microsoft under it. Then I get an hourglass pointer and a message "please wait a moment" in the centre of the screen. After a few seconds, the screen then goes black and the computer reboots.
I used a live CD to install Ubuntu and I chose the default automatic option for the dual boot partitioning. All the data on Windows can be accessed from Ubuntu, it just will not boot.
Here is the output of the boot info script:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #5 for /boot/grub.
[Code].....
View 3 Replies
View Related
Jan 17, 2011
I tried to install my ATI propertary driver and it says
E:Unable to correct problems, you have held broken packages
I have held broken packages and it wont download/install the driver :S what should i do?
I have had a similar problem before i think, also when i used peppermint i couldnt install my driver, but forget it i like ubuntu the best....could this happen because i clicked skip during some parts of the installation of ubuntu?
View 3 Replies
View Related
Mar 27, 2009
I downloaded the ISO for the network install and burned and booted it just fine. It detected my network card and got a valid ip.When it goes to actually start to install it gives an error saying:cannot retrieve repository metadata and makes mention of some file called repomd.xml
I put the url listed into my browser and it listed all the mirrors and I checked a few of the mirrors to see if they were up and they were.What gives with this? Why doesn't the network installer find the repositories properly?
View 3 Replies
View Related
Dec 10, 2010
Recently i add a lot of repositories for new apps but do0ing a zypper up after that left left many things broken ,first the my system has added 2 more entries in grub menu namely, opensuse 11.3 desktop-2.6.34.7 and opensuse 11.3 desktop-2.6.34.7-(failsafe) why are these added and now when I simply boot opensuse11.3 from menu though it starts but has no sound and typical errors shown .
Firefox is broken. how could I reach a stable state now I have these repos only code...
View 9 Replies
View Related
Nov 18, 2010
I've been having issues with yum for a while now. It won't install anything or update without crashing. When I tried to do 'yum update' after doing 'yum clean all' I got the following error:
Quote:
Error:
It updates the first two "momonga" and "momonga/primary_db", but then it crashes with the error.
I am not sure if I should uninstall/reinstall yum, or fix the repo files individually. I don't even know where to start really since I'm so new at using Linux. I'm using Momonga(fedora core) Linux. I've been able to install programs through the GUI add/remove programs, but not yum. I really want to install Wine, but it doesn't show up in the GUI, so I need to install it manually via yum I guess.
View 3 Replies
View Related
