Ubuntu :: Installation Broken After Trying To Install Proprietary GPU Driver?
Jul 19, 2011
My laptop runs really hot and after reading a few threads around the forum I came across one that said it was because of the fact that ubuntu comes with an open source driver.All you have to do is update to the proprietary driver and everything is fixed. So I went to the menu and looked for the driver. I honestly didn't check if the one that was found was compatible with my graphics card, I just assumed that the one that it found was the right one. I installed it and restarted and ubuntu wouldn't load. It goes through the initial load but when it comes time to bring up the login page, it stays black and never advances. I assumed that this was a result of an incorrect driver. Again, I turned to the forums and found that other people had this problem. So I grabbed my trusty live CD and tried to load up a live session and remove the config file that points to the driverThe live CD wouldn't load. Same thing for recovery mode. It gets to a certain point and stops. This link is an image to where the boot stops:
View 3 Replies
ADVERTISEMENT
Feb 25, 2011
Card is the Radeon x300 and in the past in a wubi install I installed the propreitary ATI driver. I'd like to do that with this installation too. I've located the proper driver and tried to run in the terminal.
I get this error:
I've read were I have to uninstall the xorg drivers and make a .deb package but idk how to do that.
View 2 Replies
View Related
Jun 25, 2010
I want to create diskless comupters for a lan party using an nfs root. My problem is that this root filesystem should be usable on different hardware (AMD / nVidia graphic cards) and I need the best performance.
My question is : Is there a way to activate automatically proprietary driver on startup without modifying root filesystem ?
View 1 Replies
View Related
Dec 14, 2010
I installed my version of 10.10 with the VMWare Player Auto Installer, and I know when you install Ubuntu 10.10 it asks if you want to install the proprietary drivers.The install must have said no to this question. Is there anyway without re-installing of getting back to this question?
View 2 Replies
View Related
Jan 23, 2010
I'm running a slightly upgraded Dell Inspiron B120 with 2 Gig RAM, 200 Gig HD. I recently switched this laptop from XP to Ubuntu 9.10. After many a long hour, I was able to get World of Warcraft running under wine but its slow to the point of being unplayable. I was used to slow gameplay on this laptop under XP, but 0 fps is a new low. Dalaran (the notoriously laggiest place in the game) is a joke. There's a 5-10 sec lag between hitting the button to move and actually going anywhere. I took all the video settings down to the minimum and did a regedit to add a key for wine.
Basically I tried all the tips and tricks I could find (including creating an xorg.conf file since I didn't have one). Nothing I did worked. I can be in the most remote, unpopulated spot in the game and I can't get more than 3fps. Somewhere I read that I should install a proprietary driver for my video card (intel GMA 900). So I went out and downloaded xf86-video-intel-2.10.0 and ran the configure script that came with it. It came back and said
Code:
No package 'xorg-server' found
No package 'xproto' found
No package 'fontsproto' found
so I went out and found Xorg-Server-1.7.1 and ran its configure script which gave me
Code:
No package 'x11' found
I tried setting $PKG_CONFIG_PATH to /etc/X11/ with no joy.
Now I am new to linux but in poking around the file system I did see /etc/X11/ which had some stuff in it. To me that says that I've got X11 installed but then again I've been using linux since breakfast so what do I know? What do I need to do to install a proprietary video driver -OR- what can I do to get the game running well enough to be playable (short of walking over to my windows desktop computer)?
View 9 Replies
View Related
Oct 30, 2010
I used the ATI executable to install the ATI videocard driver and now my Fedora install wont boot at all... it stops mid-bootup and the screen flickers and it just hangs. Is there any way for me to rescue my install with a Live CD or Live Media?
View 3 Replies
View Related
Aug 8, 2010
I've been running OpenSuSE 11.2 for some time now; my system is a Dell 64-bit with an ATI 46xx graphics card and I've used the proprietary ATI driver without difficulty, as the driver provided with OpenSuSE was pretty much unusable. I'm considering upgrading to v11.3, but there seem to be scattered horror stories involving ATI cards, particularly when it comes to ATI's proprietary driver.
View 9 Replies
View Related
May 26, 2010
I am using the most recent ubuntu kernel (2.6.32-22-generic) for general stuff, and a real time kernel (2.6.31-10-rt) for music recording. Everything was working fine under Karmic.
When I upgraded to 10.04, I had problems with my Nvidia video card, so I uninstalled everying related to Nvidia. And reinstalled the driver using the installer script from the Nvidia website.
I can install the driver for one kernel, but when I boot on the other, it says my X config does not work, and I am back to a low-res no-effect display.
If I then try to reinstall the driver under that kernel, then the first one stops working with the Nvidia driver.
View 1 Replies
View Related
Apr 7, 2011
Steps that the pdf file from ati says :
To install the ATI Proprietary Linux driver using the Automatic option, follow these steps:
1 Launch the Terminal Application/Window and navigate to the ATI Propri-etary Linux driver download.
2 Enter the command sh ./ati-driver-installer-8.573-x86.x86_64 to launch the ATI Proprietary Linux driver installer.
The ATI Proprietary Linux Driver Setup dialog box is displayed It shows the ati with the penguin. Mine doesnt show that for the file: "ati-driver-installer-11-3-x86.x86_64.run
This is the driver that I got from the website. But Im still having issues with Wow not working or recognizing that I have a great card (XFX HD 4770).
View 8 Replies
View Related
Mar 12, 2011
For those who need or want to install the latest ATI proprietary driver (Catalyst 11.2) right after a fresh 11.4 install - and might not look for solutions in the development subforum.In order to compile the module, I installed the kernel sources and the pattern devel_basis. I normally use most packages in this pattern, so I install it by default from other scripts. While running atiupgrade on a fresh install, I was surprised by the number of packages getting installed with that pattern.Please report if it doesn't work. (like aticonfig initial failed to add a fglrx section for some reason).Take a look at the atiupgrade thread in the development forum: Upgrading ATI driver with atiupgrade.
View 9 Replies
View Related
Oct 7, 2010
I've been trying to install the driver for my NVIDIA GeForce 6150SE nForce 430 in Slackware 13.1 with no success. I always get the same error report: the module you're trying to build does not match the kernel source or something like that. The result: unable to build module and the installation crashes.
I have tried to:set a custom kernel source path, install it with the slackbuilds driver and kernel, extract the contents and trying to compile it myself, find possibly conflicting drivers or modules, use different versions of the same driver (I've tried installing the versions 256.53, 256.44, 195.36.31 and 173.14.27)recompile the Linux kernel in an attempt to make sure that the tools used to build the kernel were the same used o build the module.
The only time I got a different error message was when I used the slackbuild packages. It built the 'nvidia.ko' module, but it didn't work. I got a version magic notice when booting and, when I tried to start x, a fatal error "no screens were found."
Just to be sure, I made a clean full install of Slackware (only added WICD to be able to download the drivers and ran slackpkg update and upgrade all) and tried again. It didn't work.
View 14 Replies
View Related
Oct 4, 2010
I need a quick answer if possible, is it better to remove the proprietary drivers before upgrading to 10.04 from 9.10? Or should i have the open source drivers installed? A clean install is not an option on this machine.
View 3 Replies
View Related
May 21, 2011
Upgraded to Natty,just after I got this new GPU - ATi Radeon HD 6850.
I cannot activate the driver for it, I have also tried to download and install from AMD but it didn't work. I cannot open the catalyst control centre that is already installed.
When I try I get this.
"system error: Install archives() failed"
When I open the software update application I get this
"Items cannot be installed or removed until the package catalogue is repaired. Do you want to repair it now?"
So click yes. The process is:
"Repairing broken deps and states "Finished" code...
I have tried to use this guide https://wiki.ubuntu.com/X/Troublesho...thRadeonDriver
to remove the files but it won't let me remove.
View 1 Replies
View Related
Dec 17, 2010
I'm running succesfully Debian 6.0 after first trying Debian 5.0 and ran into missing partitions. This is solved by using Debian 6.0 (Beta 2).
Now it's NVidia's turn: Under Ubuntu (yes...i know it by now...) you had to install a proprietary driver for NVidia to ensure that 3D was supported. What about Debian? There's nothing like this under Debian? How do i know if 3D is supported?
View 14 Replies
View Related
Jul 21, 2010
since i installed nvidia proprietary driver on opensuse 11.3 my boot-image is gone. This is not really in issue but i would like to have it back. is there a way to get it back or a bootimage howto or something?
View 5 Replies
View Related
Apr 17, 2010
I am currently running Ubuntu 9.10 on a Compaq Presario V3010US. My video card is an NVIDIA GeForce Go 6150 which appears to be running properly with some limitations (missing effects from CompizConfig). While utilizing the "Hardware Drivers" configuration a recommended driver is listed but when I attempt to activate this driver I encounter an error.
This error turns my attention to the log file :
This log file is extensive and I do not wish to post pages of code unless requested. The configuration does however list that "a different driver is in use". I have scoured threads to ensure that I have not posted a question that has been answered to no avail. Please bear in mind that I am in my Linux infancy and my grasp of this incredible operating system is cursory at best.
View 9 Replies
View Related
Jun 21, 2011
I'm still trying to learn the ropes on linux as a whole and I've run into sort of a huge dilema. I wanted to connect my laptop to my TV via VGA. However, it would not work because I didn't have the proprietary graphics driver for my graphics card (Nvidia Quadro NVS 3100M). I searched the internet and found the guide below because the guide provided here did not specify Quadro family graphics cards[URL]I followed the "easy method" to the T. Now I cannot boot into Fedora 15 at all (I'm stuck on bloody Windows 7 again ). It simply freezes at the boot animation (the "F" in the bubble). What can I do to fix this
View 10 Replies
View Related
Jun 13, 2011
There is one thing missing (I think) a clear guide to clearing out Nvidia and replacing it with nouveau. For all but hardened gamers, nouveau on 11.4 delivers. It also removes one more barrier to what I think is the intended goad of Tumbleweed.The problem IMHO is not that there are no clear guides. The problem is there are too many. No sooner does one person do a guide (that is clear) and someone else who does not like some point writes another guide that they think is more clear (but in fact is less clear in other aspects). And this goes on ad infinitum.IMHO we have too many guides - many of which are sufficient clear ... but the VAST number only serves to confuse users more.
Having typed that, IMHO this is NOT a Tumbleweed specific issue, but its MUCH WIDER in scope and hence does not belong as a discussion in this Tumbleweed thread.
View 9 Replies
View Related
Jan 17, 2011
I tried to install my ATI propertary driver and it says
E:Unable to correct problems, you have held broken packages
I have held broken packages and it wont download/install the driver :S what should i do?
I have had a similar problem before i think, also when i used peppermint i couldnt install my driver, but forget it i like ubuntu the best....could this happen because i clicked skip during some parts of the installation of ubuntu?
View 3 Replies
View Related
May 26, 2011
I installed the proprietary ATI graphics driver from the AMD website(i did not install it using the additional drivers tool in the administration menu) and i don't know how to uninstall it. how do i do this?
View 3 Replies
View Related
May 31, 2011
I did a clean install of Ubuntu 11.04 on my desktop which has a Nvidia GForce 7300LE card. Installation was successful, however, the moment I install Nvidia Current driver the system hangs. The only way I was able to get the system working was by doing a fresh install.
View 4 Replies
View Related
Sep 1, 2010
I have used the NVidia proprietary drivers for awhile. Yes, I know about nv and I even know about the prepackaged ones, but I've never minded getting the latest from NVidia, dropping out of X, and running the install which automatically rebuilds everything.
I recently took the synaptic update to 2.6.32-24. It worked fine and -- I guess -- migrated my driver. I didn't think about it. For no particular reason today I tried to build the latest NVIDIA driver (256.53 -- had been on an earlier 256 series). The build failed with some conftest failures. Even trying to rebuild the working driver failed. Reverting to 2.6.32-23 allowed both to be built and they work. So something the NVIDIA installer is expecting headerwise must be different between 2.6.32-23 and -24.
View 5 Replies
View Related
Nov 23, 2010
Installing Mythbuntu 10.10, which I finally got installed properly. At first I installed the open-source video drivers just to make sure the installation worked, then I installed the "version current" proprietary drivers using the graphics drivers manager...tool...thing. However, when I restarted the computer, it has a text-mode splash screen and I stay in the first virtual terminal.
If I try to go to the GUI "terminal" [Ctrl-Alt-F7], it appears to be partway through some kind of check:
Code:
I ran sudo dpkg-reconfigure xserver-xorg to try to get back to the open-source drivers, but it didn't give any text output and went straight to the next line of command prompt, when I restarted it did the exact same thing. Any tips for at least getting back to the open drivers? I'd like to not have to reinstall again (I'm dual-booting WinXP,). The card in question is a GeForce 6200 AGP.
View 6 Replies
View Related
Nov 29, 2010
I'm afraid I only have basic experience with *nix command lines and have only been using Ubuntu for a week, so I may require a little bit of hand holding on something as nuts-and-bolts as a driver issue.
Relevant Hardware:
From lspci -v
Quote:
01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3470 (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited Device e390
Flags: bus master, fast devsel, latency 0, IRQ 49
Memory at 80000000 (64-bit, prefetchable) [size=256M]
Memory at 90200000 (64-bit, non-prefetchable) [size=64K]
I/O ports at 2000 [size=256]
[Code]....
The Symptoms/Experience: Under the default installation of Ubuntu, I have no sound. When I install the proprietary ATI drivers, I have sound. I can uninstall and reinstall the proprietary drivers and recreate this every time.
My only problem with using the proprietary driver is that there's a lot of problems with video playback that is fixed with the free, default driver. But when I use it, I have no sound and watching a movie is still not very fun. From everything I read, many people are using the provided ATI driver with sound and fixing that should be easier than fixing the ATI driver's video tearing, which has largely stumped the community. Having failed to install "OSS" and now having no sound with either driver, I'm probably going to reformat/reinstall today but am looking forward to fixing this issue.
View 5 Replies
View Related
May 2, 2010
Everything works great at the moment, no hardware problems or anything like that. But whenever I enable the proprietary nVidia driver 185, it causes the boot screen to not come up, Ubuntu stops recognising my sound-card and refuses to work and when I try to shut down or restart, it just takes me back to the log in screen. When I remove the driver, everything works okay again.
View 3 Replies
View Related
Dec 14, 2010
Is it possible to enable the desktop effects without enabling the proprietary driver? Im using an Asus 51vx with Nvidia Geforece GTX 260m and the proprietary drivers kind of suck. My resolutions (although set correctly) are distorting pictures, my dual monitors is being funky and unpredictable... etc. Everything works great without the drivers installed except i cant enable advanced desktop features so my awn looks good . I know its just cosmetics, but i love my cosmetics, and they took a loooong time to get perfect.
if this is a repost but i couldnt find it anywhere. (so much info about advanced desktop effects out there).
View 1 Replies
View Related
Jan 9, 2011
I installed the proprietary driver in System->Administration->Additional Drivers, but after installing when I am required to restart, I restart my computer and encounter a black screen. I tried using Ctrl-Alt-'-" to change the resolution but that didn't work because the computer is completely frozen, so I have to reboot in recovery and uninstall the driver...
This also makes it so I am unable to go to the maximum resolution my desktop can obtain. (1920 x 1200, but I'm limited to 1600 x 1200)
View 1 Replies
View Related
Apr 25, 2011
I cannot find the correct command to uninstall the Nvidia blob, can anyone point me to the right one that removes the latest drivers?
View 1 Replies
View Related
Sep 1, 2011
I have Ubuntu 11.04 on a netbook, and I'm getting a lot of tearing on video playback--both online and offline. The graphics card is some generic intel card, and there doesn't seem to be a driver for it. So, is there a way to enable vsync without having a proprietary driver?
View 3 Replies
View Related
Nov 22, 2015
I installed the proprietary Nvidia 352.63 driver from their website, but now debsums shows are not installed five files in the five packages. I tried to reinstall these packages but it broke Cinnamon desktop environment. Is there the possibility to compile the driver order to have all this files?
View 14 Replies
View Related
