Ubuntu Networking :: Network Manager Forgetting WPA Password
Jan 23, 2010
Booted up my laptop with wireless disabled (using the little switch on the laptop). I flipped the switch, network manager showed all the wireless networks, but didn't connect to any. So I picked mine, and it asked for the WPA key. Now normally (if I had booted with wireless enabled) it would connect without asking for the WPA key. So I rebooted again with wireless enabled this time, and same deal. It seems that it's just forgotten the key altogether.
I put in the key and it's all back to normal, but I'd like to know where/how network manager is storing the WPA key, and why it forgot it.
View 1 Replies
ADVERTISEMENT
Apr 7, 2010
I'm using 9.10 most recent updates. I want to connect to a wireless network and get a dialog box offering "WPA & WPA2 personal" as the only choice. The passphrase I was given is 6 letters but the "Connect" button does not light up until I get to 8 when entering wpa/wpa2.
Do I need to convert the passphrase somehow?
Atheros 9k and Linksys "Wirelss G router with SRX200".
View 2 Replies
View Related
Jan 29, 2009
I've tried Ubuntu, Arch, and most recently Fedora but the SUSE GNOME environment blows everything else away!
The only problem (so far) is that Network Manager requires you to enter your password every time you login to unlock the password keyring. I want to disable this.
I think some distros disable the prompt by using the login password to unlock the keyring, but I use auto-login (if that makes a difference).
View 4 Replies
View Related
Jan 20, 2010
I routinely use somewhat spotty wireless hotspots, and Network Manager is driving me insane. Whenever there's a momentary drop, NM will prompt me for my password. I enter it, and it connects perfectly. And then 5 minutes later, it'll prompt me again. How do you instruct NM to remember a password, and stop prompting?
View 2 Replies
View Related
Apr 25, 2010
I am new to linux and ubuntu. I am using ubuntu Hardy Heron release 8.04 I have not used it in a long time and then when I did fire up the laptop. I get a message asking me to enter a password for keyring. The message is as follows; Unlock Keyring "The application 'Network Manager Applet' (/usr/bin/nm-applet) wants access tot he default keyring, but it is locked.' Password: _______________
Then I can Deny or OK it. How can I disable that and keep it from popping up. Also, it there a way to figure out/change the administrator password if you don't remember it as well?
View 2 Replies
View Related
Jan 1, 2011
Running ubuntu 10.10 here, brand new install/machine.USB wireless based on a realtek chipset. I spent a few days trying ndiswrapper, and now have the native driver up and running. I can see the network(s) but can't connect. If I encrypt the network, i get a bad password error from wicd network manager (All encypt. methods- Weps, WPA etc) If I open my wireless up with no encryption, i receive a "can't obtain IP" error.
View 1 Replies
View Related
Sep 27, 2010
Our corporate wireless network uses continuously changing passwords with RSA tokens.So every time we need to connect to the wireless we need to enter a new password off the RSA token. For extra fun using the wrong password a couple of times in a row causes the users account to be locked.Network manager automatically stores and reuses the password, with the net result that it is constant getting my account locked.Is there some way to prevent it from storing my password for that network?
View 1 Replies
View Related
Jun 11, 2010
These problems just started the last couple of days but I have been using Lucid 10.04 for a month now. My wireless Signal varies in strength wildly. I sitting at home, not 20 feet from my router. I never had these problems before Ubuntu Lucid Lynx 10.04. I am running both Network Manager and Wicd.
Errors:
1. Wicd states "Wrong Password" which is not true.
2. Dropping off-line for no reason, sometimes 3 or 4 times a minute and sometimes it works fine for hours.
3. Firefox 3.6.3 Automatically Checking "Work Offline"!?
[Code]...
I have the Proper Wireless Drivers. I have not changed my wireless settings, channel or WPA for 8 months now so I know thats not it.
View 1 Replies
View Related
May 15, 2010
I've set up Internet connection sharing, with Internet from wlan0 being shared to eth0 locally. Interface eth0 has the IP 192.168.0.1, since it's the gateway. Problem is, every time eth0 is disconnected, it forgets its IP, and then nothing works until I
Code:
ifconfig eth0 192.168.0.1
again.
Is there a way to permanently set the IP for eth0 to 192.168.0.1 so that it's remembered across disconnects?
View 1 Replies
View Related
Jan 2, 2010
After forgetting my general password/password lost by Ubuntu (uses @...) I use the Psychocats lost password guide: [url]
This allowed me to reset my password but now after login the Network Manager applet pops up and demands a password.
This password is the original password that has now been changed. Putting this original password works.
I've now changed my password back to the original one to avoid the Network Manager prompt but I can't find where to change the Network Manager password or tell it to use my general password.
If I change my general password Network Manager asks for the old one.
View 2 Replies
View Related
Mar 9, 2011
I have setup my laptop to connect to a VPN server running openvpn.
This works fine if I from the client, start OpenVPN from the terminal. /etc/init.d/openvpn start
It then asks for a password for the certificate, which is should.
I have then installed the OpenVPN option for the Gnome network manager (network-manager-openvpn), so I could use the nm-applet for this, instead.
But it seems to be that there is a little bug, so I does not prompt me for the certificate password, OR use the password this is actually set for the certificate. (kinda irritating)
I get the following error on on the client.
nm-openvpn[2936]: ERROR: could not read Private Key username/password/ok/string from management interface
It seems like an very old bug, I tried the following without any luck (Yes I noticed it was for Ubuntu). [url]
View 1 Replies
View Related
Jun 22, 2011
we're using Network Manager with vpnc plugin (cisco vpn).According to our IT policy, we'd like to prevent the users from saving the password.I've been trying to set the value via gconf as mandatory, but the setting is blatantly ignored:system/networking/connections/1/vpn/ipsec-secret-type...I set it on "ask" and mandatory.I'm quite sure that's the wrong key.
View 2 Replies
View Related
Jul 1, 2010
I recently fixed an annoying problem and I thought it would be nice to share my solution here. The problem was that after a cycle of suspend/resume, Network Manager would only auto-connect to the same network as it was previously connected to. So, for example, if I suspended my laptop at home, and then I went to school and resumed it, it would try to connect to the home network, and then just give up. It would not connect to the school network unless I explicitly told it to.irst, I'll describe the fix. If you're having this problem, you can this. Copy the following:
Code:
#!/bin/sh
case "$1" in
[code]....
View 5 Replies
View Related
Jan 24, 2011
I am a Windows refugee who discovered Ubuntu as a way to save my files from my virus-ravaged computer. Had no installation discs for Windows, so when I had to wipe my hard drive and start over, I decided to give Ubuntu a try. I've had mixed success, but that's another post...
Right now, the problem is that I installed 10.10 two weeks ago and was able to connect to the Internet with no problems - until yesterday. Suddenly, our wireless network (the only one in the vicinity) does not come up as available in Network Manager. In fact, the entire wireless option disappeared. I know there are many posts and threads on here about this, but weeding through them trying to find an answer is more frustrating than actually dealing with the problem. I know the router works because I can post on this forum from the Macbook. I really like Ubuntu and would like to keep using it, but not being able to connect to the Internet now on top of the other issues I've had is making me doubt I want to continue down this Linux road.
P.S. When I attempted an analysis through System Testing, it said something about there being no proprietary drivers?
View 2 Replies
View Related
Jun 14, 2010
I have used ubuntu in the past but had a lot of hardware issues with it and unfortunately moved back to windows (( BUT i have tried Ubuntu again and all seems to work great except wifi My wifi connection is sort of working because when i run SUDO IWLIST SCAN it does pull up all available networks. But in the network manager icon on the panel i left click but i see no networks and can't connect to anything. I WOULD LOVE TO keep Ubuntu and use it permanently but I must get wifi working or else this won't be possible.
View 4 Replies
View Related
Feb 18, 2010
I have the problem with my notebook, that, after I used it at work, the network-manager always tries to autoconnect after boot. He has no cable network and so I get the message "not connected" after a while.how to tell the network-manager, not to autoconnect each time?
View 4 Replies
View Related
Jul 10, 2010
I recently put Linux on a Thinkpad T40 I got. The wireless card works out of the box--I can see nearby networks. However, I can't connect to mine. network-manager would try (spin spin spin), fail, ask for the password, and then go back to the beginning and repeat indefinitely. This happened to me on a different computer, and on that one all I had to do was use wicd instead of network-manager. So I installed wicd, but it's not working either--it hangs at "Obtaining IP address".
I've found many, many threads with people who had the same problem, but none of their fixed worked for me.
I also tried to get wifi going manually, using this guide, but that didn't work.
View 3 Replies
View Related
Oct 26, 2010
My wifi connection drops sometimes and, for some reason, Network Manager attempts to connect to my neighbor's network, which requires a password (which I don't know). Is there any way to blacklist a wireless network so that the Network Manager will never attempt to connect to it?
View 4 Replies
View Related
Mar 2, 2010
I had trouble connecting to a wireless network with openSUSE, so I tried the YAST network manager to see if that fixed it. Not only did it not fix it, but now I cannot connect to any network, wired or wireless. I tried to open the default network manager and it said "Network management disabled". How do I re-enable it?I also have set YAST settings back to their originals with no luck.
View 7 Replies
View Related
May 3, 2010
I'm try to create a mobile broadband connection using my Huawei E 1550 medem. but in Network manager there is not way to select my modem in the first step ( device selection step ) the drop down menu is locked. what to do ? how to configure my modem with ubuntu ?
View 1 Replies
View Related
Apr 2, 2011
Whenever I start up my laptop i do not get a wireless connection automatically. I have to rightclick network manager applet and select enable networking. After that everything works fine untill i shutdown and restart my laptop. I would like a way to change this so that my wifi connection is working whithout having to click something first..
OS:Xubuntu 10.04 LTS!
hardware: dell inspiron 6000
nm applet: 0.8.?
View 6 Replies
View Related
Aug 23, 2010
Neither of my wired network connections are listed in the network manager applet. I know that networking seems to be functional since I can ping local devices on the network. I can't resolve DNS names however. I suppose this is because network manager usually handles DNS? I've posted the outputs of various configurations below.
Code:
/etc/NetworkManager/nm-system-settings.cfg
# This file is installed into /etc/NetworkManager, and is loaded by
# NetworkManager by default. To override, specify: '--config file'
# during NM startup. This can be done by appending to DAEMON_OPTS in
[code]....
View 4 Replies
View Related
May 10, 2010
Loaded Ubuntu 10.4lucid on TransPort NX Mobile Pentium II, 328MiB,Using Netgear Rangemax wn511b. with Broadcom STA wirless driver. bcm43gx.Boot computer and network manager shos "no network devices available" Run system/administration/hardware drivers and the Broadcom STA driver shows up (only one that shows up) REMOVE and then ACTIVATE and the network manager sees it and connects fine. Shut down computer, restart and no device. I am forced to Remove and Activate each time I start the computer.Is there a way to set this driver to be found and run at computer start.
View 4 Replies
View Related
Feb 27, 2010
Since the last update the 'wireless network authentication required' box keeps asking me for my wep key. Everything was working fine previously, I've even re-installed ubuntu just in case it was something I did....again everything was working OK until I installed the latest Nvidia drivers and updated ubuntu.I can see my wireless connection when I click on the network manager icon I just wont connect.Wired connection works fine.
05:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
View 3 Replies
View Related
Jul 24, 2010
I'm using NM applet to connect to the Internet.I just need to know my Internet usage details such as Connection Duration,Data sent and received.
View 2 Replies
View Related
Sep 22, 2010
I'm trying to change my network settings under Gnome and 9.10.
System->Preferences->Network Connection brings up "Network Connections". Under the "wired" tab, I see "ifupdown (eth1)". The edit button on the right side is grayed out.
Is this where an IP address can be config'ed, or is it somewhere else?v
View 3 Replies
View Related
Mar 17, 2011
When I login to my laptop, there's a dialog that asks me for a password. When I fill that in, it allows the network manager to access my wifi password and connect to the wifi.How can I change the password that network manager is asking for? It's kinda awkward to ask this question - I am not asking how to change my wifi password, but the password that comes up - Seahorse? I'm not sure what's used on Lubuntu.
View 11 Replies
View Related
Jan 2, 2010
I've installed Karmic after using Jaunty for a year. In Jaunty, my wireless Belkin USB adapter would get it's best signal if I set the rate at 11M...sudo iwconfig wlan0 rate 11MTo avoid having to enter that in terminal after a reboot, I followed the advice of Raven on another thread that suggested using WICD instead of Network Manager, as there were options for scripts in WICD that would allow a startup script...sh -c "/sbin/iwconfig wlan0 rate 11M"This doesn't seem to be working for me in Karmic (my connection constantly drops). Plus, the new icons for WICD are distracting (it changes color from green to yellow when the signal goes from good to low) With Network Manager and setting the rate @ 11M via terminal, everything seems rock solid (I left Last FM on last night and it was still playing when I woke up).
View 2 Replies
View Related
Jan 4, 2010
I used Ubuntu for the first time yesterday (V.9.04) and imediatly upgrade it to V.9.10. After,the DSL conection failed to conect. After reading many threads here I was able to connect by opening a terminal:
sudo pon dsl-provider
It seems ther's a bug with network-manager, but I'd like to use it again as it easier and NB user-friendly.
View 1 Replies
View Related
Jan 21, 2010
I am working to connect several Ubuntu computers to a Hughs satelite radio via a Trednet switch. The ISP requires static IP addresses on our machines. Obviously, to do that I need to access the Network Manager.
When I click on the Unlock button the machines wait for a minute or so and return a "could not authenticate" message. It never prompts for a password.
When I loaded the OS on these computers in the states, there were no issues with the install or updates and configuration. Now that they have been shipped to Africa there is something which has happened to all the computers and they will not unlock.
If i reload the OS they do fine..
View 3 Replies
View Related
