im using ubuntu for a long time now and i intalled tint2 recently but if i maximalize window there is gap between end of that maximalized window and end of my screen and that gap is where my tint2 is...so my question is, can i configure tint2 that if i maximalize window it will be over whole screen?
View 2 RepliesI installed Tint2, and the icons that normally appear in Gnome-panel's Indicator-applet do not appear in the system tray of Tint2. I mean volume control, battery, etc.
View 2 Replies View RelatedIf I start tint2 as root it works, if I try as spoovy, it segfaults.
Code:
bash-4.1$ tint2
real transparency off.... depth: 24
xRandr: Found crtc's: 2
xRandr: Linking output LVDS with crtc 1
[Code]...
I'm a quite new Debian Jessie user. I've a very old laptop and I'm trying Openbox + tint2. Everything is ok with openbox but i have some problems with tint2, especially with tint2conf. When I try to save a config, it says "saving not yet supported".
View 13 Replies View Relatedthis might not seem a big issue but I'd really like to know whether it's possible to stop Nautilus from unfocusing windows when pressing on an item in another windows and draging it to the first one. For example, I want to move a file from one window to another. I click the middle mouse button on that item and drag it to the first one which looses it's focus so often it's quite irritating.
View 6 Replies View RelatedBackground: I'm a 20+ year Mac user, switched four years ago to Linux.I have NO experience with Windows to speak of. Whenever I've gotten a new box, it's either been home-built or a Mac.Now I have a new Acer Aspire AS7551 laptop, and although I have not yet booted into Windows, it comes with a Windows 7 Home Premium license. I've been running it with Ubuntu 10.04 off a flash drive and everything works perfectly.
What I want to do: I want to wipe the disk, install Lucid, and run Windows in Virtualbox (for the sole purpose of watching some Netflix and learning a little bit about Windows 7). For the purpose of this question, please accept that I DO NOT want to dual boot.The problem: From what I can find, I can't use the "recovery discs" that came with my laptop to create a virtual machine. This is confusing, because it seems like I paid for a legitimate Windows license for use with this laptop.
Questions:
1. Would MS exchange my recovery discs for a regular install disc to go with my license code if I explained this to them?
2. If not, is there a source for Windows ISOs that I can safely use with my license? (I am aware that the legitimacy of that approach is questionable, but I am quite comfortable with the ethics since I paid for Windows 7, own the license, and only want to use it on the same computer.
3.If not,is there any way in heck I can use my recovery disc to create something Virtualbox can work with?
4. If not, how are all of you people getting your Windows virtual machines going??
(I have read that Acer is a major hassle to get a refund from for the "Windows tax" so I might as well be able to use it--this is MS' chance to win over a fan if only they will let me!)
I am a ubuntu novice. I am running 10.04 LTS on a Lenova laptop. Runs fine. Yesterday upgraded firefox and upgraded Java 6 from update 20 to update 24 so that I could use the Zotero bibiliographic program in FF. After the upgrade and restart, the windows title bar that includes minimize, maximize and close buttons has disappeared from all windows that I open except google chrome. If I open and app, or FF, or the dvd player, title bar is gone. I have noticed that Java updates have caused similar problems before but none of the prescribed steps seems to have changed my system
View 9 Replies View RelatedLast week I installed Ubuntu 10.10 on my system in dual booting. I had installed succesfully both but unable to see data files from windows OS. Though I have excercised the options in various resources available on internet/blogs. System takes about 03 hrs during installation process. I am also unable to configure Thunderbird.
System hardware info is as -
System ManufacturerVIA Technologies, Inc.
System ModelKM266APro-835
System TypeX86-based PC
[code]....
I have a Vista/Kubuntu dualboot, with grub2 as my loader. Because i have read that Windows likes to ignore something else present on the system and overwrite everything with itself. So i installed Vista, then Kubuntu.Now i want to upgrade my Vista to Win7. My question is - what should i do in order to keep my current dualboot intact (Grub2 as a loader, and kubuntu fully functional). I fear Win7 might even never ask me about keeping my kubuntu dualboot, just overwrite everything. PS: My bootinfoscript output
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code]....
I am actually facing a vague problem here. I was previously running Windows XP and Ubuntu . Ubuntu was installed Windows XP The problem is
1. First I tried to do some disk partitioning. That ended up with some error.
2. Ignoring that, I went to install Windows 7 over Windows XP but I was not able to proceed with Windows 7 , because the partitions were corrupted.
3. So I used Ubuntu LIVE CD (Grub was lost at this point )and used 'testdisk' and recovered the partitions.
4. Now installed the Windows 7 successfully.
5. Now again I moved to Ubuntu Live CD to write the GRUB. After which I tried restarting
6. Now Ubuntu is booting perfectly as before. But the problem is with Windows
7. The GRUB loader instead of showing Windows 7, it shows Windows XP !!! . and there is no other entry for windows. When I tried opening it, it says "error, cant read file" and further inout moves back to the grub loader list again.
"How do I change the entry to Windows 7 from Windows XP and boot Windows7 successfully " I tried it a couple of times, same thing happens . So how to change the entry?
Well i was playing with some of the features Compiz has to offer, and im liking some of the stuff, i was using wobbly windows yesterday and it was perfectly fine, so i set it and left it, today i try and play around with it and the windows don't wobble when i drag them, however they do when i minimize or maximize.
View 1 Replies View RelatedI recently moved and didnt have internet. Out of a fit of boredom i decided to get me Ubuntu 10.10 disk and dual boot. My laptop has a SD slot in the front of it that has never been used so i decided that itd be cool to have ubuntu on an SD card that i could boot any time. I used the default installer to install it onto the SD card instead of using the Universal USB Installer (i imagine this is where i went wrong). It installed and everything works fine and when i boot up it lets me choose between Linux and Windows when the SD card is inserted. When it is not i get this screen http://imgur.com/gg63v. The only really problem is me worrying that the sd card will be lossed or get broke and i will no longer be able to access Windows. Is there anyway i can set the windows boot loader back t the default bootloader (i think this is what need to be done i may be completely wrong>
View 3 Replies View Relatedi have just installed Ubuntu 10.10 on a pre installed windows 7 system. Ubuntu is working really well but the only problem is that when I try to boot into windows,
I get the windows sign and then I get a black screen and windows does not load. It seems to be an easy problem to solve because I can actually boot windows 7 in
safe mode with no problems at all! The problem is there when I try to boot windows 7 normally. To be honest I only need windows for a project that uses MSQL server.
I have 10.10 installed within my Windows Xp.All was fine.Then,I upgraded to 11.04.Boot screen etc is fine .Log in is automatic in Classic.Unity & Compiz not supported.Now,again everything is fine except that my xp partitions are not recognised and hence I can not mount them and access them.
View 5 Replies View Relatedi want connect ubuntu server to windows and retrive mysql from windows
View 8 Replies View RelatedI have a problem when i installed ubuntu via usb drive and cd.. and i try it in windows xp and windows 7. it's a same problem .. but this is the error message " permission denied "
The log:
Also i try this v Ubuntu 11.04 Ubuntu 10.10
I have a Compaq Presario CQ60 with Nvidia GeForce 8200M graphics card. When I first installed Windows 7 followed by Karmic in dual boot I could boot into both OS. Now when I try to boot into Windows, it displays the Windows logo and then drops back to the grub menu. It may have started happening after Windows 7 installed updates. I tried reinstalling both Windows and Karmic again and it again worked initially but now Windows no longer boots. Does anyone have any suggestions about what may be causing this or how I can fix the problem without reinstalling?
View 9 Replies View RelatedI had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
I have a dual-boot with windows and linux. Sometimes if I reboot from windows into linux, I notice that when X is starting up before the login screen comes up it will flash a screenshot from Windows. Has anyone ever noticed this?
View 4 Replies View RelatedWhenever I select Windows 7 under GRUB, it just hangs at a flashing underscore windows 7 is installed under my first primary partition, what should the GRUB section look like for it? I can't check what mine looked like because this happened:I started up the windows 7 recover (another option under GRUB, on hd(0,3). 7 is on hd(0,1)) and it worked. I decided that i wanted to try something else before i restore my windows 7 partition to its factory state, so i exit the recovery thing. Next thing I know, my Ubuntu partition is completely gone, along with my grub.cfg files -.-
Partitions are like this in this order:
sda1: Windows 7 (can't boot into)
sda8: ubuntu (gets erased)
sda5: partition i'm going to use soon for another distro
[Code]...
oh, and by default, there was like 20 MB of free space in front of my windows partition (idk why asus did that) and when i shrunk my first partition (the windows one) it moved it all to the left -.- do you think something when wrong while doing that?
I currently dual boot windows XP Pro with Ubuntu 9.10. I made a mistake last night playing with gparted and lost my E drive, which had all of my music, games and movies plus is where my Ubuntu install was. I then ended up reformatting the drive with windows and reinstalling Ubuntu 9.10.My question is how can I put my windows files on my E drive without going through the hassle of reinstalling windows.
I have a 20g IDE drive where my windows install is, windows and Ubuntu both tell me this drive is failing, (I have used it for booting since 2002, so I am not that concerned with it), another 40g IDE drive for more storage and a 160g SATA drive where Ubuntu is again installed. I want the SATA drive to be my main boot drive now, so how can I clone my windows boot to the other drive. I tried gparted but could not figure it out. I have gparted burnt to cd, booted with it and just don't understand how to use it.Also, if I clone this boot drive to the SATA drive, do I need to change jumper settings on my 40g to master when I take out the 20g drive.20g master and 40g slave on first IDE channel and 2 CD devices on second IDE channel and SATA drive on first SATA connection. I read somewhere that it is better to keep the cd devices on another channel than the disk drives.
ive been dual booting ubuntu and windows for a while now. For the first time in weeks ive booted windows XP, and i really hate the fact that windows explorer can't read more than the first partitions. Is there a way to make the explorer see more? I want to be able to reach my files on the ubuntu partition from windows, not just the other way
View 4 Replies View RelatedI just did an upgrade from 9.10 to 10.04 and now I can't boot into Windows 7 on this dual boot desktop. I usually do a clean install but with a laptop and desktop a copy of Windows 7 and Ubuntu on each machine it's getting very tiring with 4 os's so opted for the upgrade this time.
During the installation there was a window that game up about upgrading grub and what devices to install it on. The help box was not very complete and seemed to say to click all the check boxes which included the main drive and it's partitions including windows. During the install somewhere it said something like grub could not be installed on one of the devices which I think was sda6 which is probably the Windows 7 partition.
So how would I get the option of booting into Windows 7 on startup as now I only get a blank black screen when I click on the Windows 7 option upon bootup? I hope I don't have to reinstall one or both os's again from scratch as this is becoming to much work to do on two systems every 6 months, especially with the amount of programs I have installed.
I believe i no longer have Vista. I had installed 10.04 side by side with Vista. Now that we have 10.10 i wanted to do a fresh installation on my laptop. I wanted to do the same thing, install it side by side so what i did is i installed gparted and tried to erase/delete ubuntu 10.04 and leave windows on it. From what i remember, i did just that. I restarted my laptop and windows didnt come up...i got a grub error...i decided then to install ubuntu 10.10. i selected to install ubuntu side by side again with vista. During the installation, i received an error about a partition...i made a few clicks...after it was installing and it went smoothly.
Now when i restart my laptop...it does not give me the option for windows....how do i know if i still have windows on my laptop? According to Gparted i dont have it anymore...
Specs:
Dell E1505
2 gigs
80gb
I have Ubuntu 10.04 and Windows XP running each one in a partition of two different hard drives. I want to install Windows 7 in a second partition of the hard drive where Ubuntu is running. Windows 7 did not see the hard drive where Ubuntu is running. So I understand that I need to format the partition where Ubuntu is running, install Windows 7 and later on Ubuntu 10.04 which will create the boot for the three systems. But I want to backup Ubuntu's installation, and after installing Windows 7, install the backup. So I will need to add the file for the dual booting. How can I do it? Is it there any piece of software that could create the three booting option that I need?
View 1 Replies View RelatedSo I shrunk my Windows 7 partition. Now I have a 450GB partition with Windows 7 on it and a 50GB partition for Ubuntu that is unallocated space currently. So when I go to the setup for Ubuntu, booted into using my USB flash drive, it doesn't recognise that Windows is there. It thinks that the hard drive, all 500GB of it, is free space. Going into GParted, it also seems to think that the entire hard drive is a blob of unallocated space. According to tutorials online, this shouldn't be happening. It should recognise the two different partitions. So I went into Computer in Ubuntu (Live) just to double-check and indeed all my Windows files are there and I can still boot into Windows just fine.
View 1 Replies View RelatedI just installed Ubuntu alongside windows vista and now cannot reboot windows
View 3 Replies View Relatedhow to be able to add windows 7 to my grub menu or to even be able to boot to windows 7. I am currently unable to do it and my system just automatically goes straight to ubuntu. I've tried holding down SHIFT during startup and all that appears in my list is ubuntu entries and a memtest entry. My windows 7 files are still intact because I can see the drive through ubuntu and see all my files. I am trying to have Windows 7 on one hard disk that is 640GB and ubuntu on a second hard disk that is 160GB
[Code]...
Ive been running windows 7/Ubuntu dualboot for some years now and never had any problems.Some months ago I got a new Patriot Inferno ssd. Ofc the first thing I did was to installl windows 7, it had no problems, ran fast and smooth. Then when I reinstalled grub I started to get error when trying to start windows, the logo never apeared and all I got was the message "Windows failed to start. A recent hardware or software"Status: 0x00.00F" "Info: The boot selection failed because a required device was inaccessible.". It does not matter what order I install windows and ubuntu in, or how many times Ive tried to reinstall grub. Windows 7 will not work while I have grub/windows installed. Right now Ive got them installed on separate drives, ubuntu on the ssd and windows on a partition on a 1tb hdd. Unfortunately I need to have windows for .net programing and gaming..
[Code]...
I'm using Karmic Koala 9.10 (amd64) on /dev/sdb6 and windows 7 on /dev/sda2. I mounted my windows 7 partition in Nautilus. I copied some files and made some folders from Nautilus onto my windows 7 partition. I tried booting into windows 7 but it failed on loading Windows 7. It then gave me a blue screen flashes and then restarted. The blue screen flashes so quickly i cannot determine the exact issue. I tried booting into windows 7 in Safe mode. It fails to load and gives what i believe is the same blue screen. I used to be able to read and write files onto my old XP and Vista partitions. Now with windows 7, I seems that I can't.
View 1 Replies View Related