Ubuntu :: Tint2 And Lucid ?
Jun 17, 2010I installed Tint2, and the icons that normally appear in Gnome-panel's Indicator-applet do not appear in the system tray of Tint2. I mean volume control, battery, etc.
View 2 Replies
ADVERTISEMENT
Ubuntu :: Maximalized Windows Over Tint2?
Mar 7, 2010im using ubuntu for a long time now and i intalled tint2 recently but if i maximalize window there is gap between end of that maximalized window and end of my screen and that gap is where my tint2 is...so my question is, can i configure tint2 that if i maximalize window it will be over whole screen?
View 2 Replies View RelatedSlackware :: Can't Start Tint2 As Regular User?
Aug 12, 2010If I start tint2 as root it works, if I try as spoovy, it segfaults.
Code:
bash-4.1$ tint2
real transparency off.... depth: 24
xRandr: Found crtc's: 2
xRandr: Linking output LVDS with crtc 1
[Code]...
Debian Multimedia :: Tint2 - Impossible To Save Config
Nov 26, 2015I'm a quite new Debian Jessie user. I've a very old laptop and I'm trying Openbox + tint2. Everything is ok with openbox but i have some problems with tint2, especially with tint2conf. When I try to save a config, it says "saving not yet supported".
View 13 Replies View RelatedUbuntu Installation :: How Stable Are The Lucid-proposed And Lucid-backports Options In The Software Sources Settings
Oct 11, 2010Ubuntu 10.04 how stable are the lucid-proposed and lucid-backports options in the software sources settings?
View 4 Replies View RelatedUbuntu Installation :: Procedure For Updating From Lucid Beta 2 To Lucid LTS?
Apr 30, 2010What's the procedure for updating from Lucid Beta 2 to Lucid LTS? Is it just "apt-get upgrade"? Or would I be better off with a clean install?
View 2 Replies View RelatedUbuntu Installation :: How To Switch From Lucid 32 Bit To Lucid 64 Bit
May 9, 2010I recently upgraded from Karmic to Lucid via the Update Manager. I would like to upgrade further by switching from 32 Bit to 64 Bit. I downloaded the Lucid 64 Bit ISO and wrote an install disk. When I reboot the computer with the install disk nothing happens.
View 2 Replies View RelatedSoftware :: Lucid-wx Instead Of Lucid ?
Mar 23, 2011I recently installed Ubuntu 10 and when checking the version using system|about it says:
Code:
You are using Ubuntu 10.10 - the Maverick Meerkat - released in October 2010 and supported until April 2012. Now, I run some shellscripts and they check the distro. lucid-wx is not in supported versions but lucid is. Where can I change the lucid-wx to lucid?
Is it somewhere in a textfile or so? I cannot find it in /etc/issues or using man -n of man -a or so.
Also, it is not mentioned in /etc/lsb-release.
Ubuntu :: Can't Log In To Lucid
Jul 6, 2011I just tried to log into my Ubuntu Lucid machine, and I get the login prompt, but when I try to log in, the screen goes black for a few seconds and then goes right back to the login screen and I get a warning about my Gnome power manager defaults not being set correctly.
View 1 Replies View RelatedUbuntu :: Can't Burn Lucid 10.04 Iso CD
Apr 30, 2010I've burned iso CDs for 8.10, 9.04, 9.10, Linux Mint 5, 6, 7 with Brasero. In addition I've burned music CDs with Brasero. It has worked well for me. But now I can't burn a 10.04 iso CD. I REALLY want to get a CD burned so I can install Lucid Lynx.
don't suggest I try kb3, Gnomebaker, or some other burner.. Brasero which always worked before.
Ubuntu :: Lucid Cd Not Approved?
May 2, 2010I had ordered for a Ubuntu 10.04 CD on 27th. It's still not approved...can any of you say why.... I have received 3cds from ubuntu previously by ordering. It takes about 1-2 days to get the approval....why is it so late this time?
View 9 Replies View RelatedUbuntu :: Making A Lucid Iso With A Few Little Changes?
May 2, 2010I want to make an iso for some friends [and maybe friends of friends] that aren't all that tech savvy, so I want to change a few things to the original Lucid iso. First, I want the option to install Lucid out of the boot menu [but the other options should ideally stay]. Second, I want to include the ubuntu-restricted-extras so they can immediately try it out and see that it also plays video/audio etc.
View 9 Replies View RelatedUbuntu :: Lucid Does Not Recognize RAM?
May 3, 2010I just upgraded from 9.10 to 10.04 this morning and half of my RAM is not recognized!
Specs: Pentium 4 2x 2.80GHz, 1001.6 MiB RAM (should be 2x this), Ubuntu 10.04.
Ubuntu :: Etherape Won't Run In Lucid
May 12, 2010I have just updated to Lucid, and all seemed to go well except for one issue. etherape won't start when I run it as root. When I start it with a normal user, it starts OK, but I cannot access eth0 which I want to monitor. From the command line: peter@trinity:~$ sudo etherape
[Code]....
Ubuntu :: Cannot Shut Down Lucid
May 14, 2010I cannot shut down Lucid on the roper way, only from terminal with "sudo poweroff".
View 1 Replies View RelatedUbuntu :: 10.4 Lucid Not Recognized ?
May 14, 2010About two weeks ago I upgraded from Karmic to Lucid. The upgrade went fine, everything works wonderfull, except maybe for Wine but am still figuring that out.
What I find a bit strange is that on the boot-up screen (where I get the choice between the different OS's on my two hard-drives) I still see Karmic listed on the partition where I upgraded (see attachment: on /dev/sda1).
When I boot-up, I first get this message: Mounting: mounting none on /dev failed: no such device
This stays about 20 seconds on screen after which Lucid starts up and gives me the log-in screen.
Ubuntu :: Lucid Not Booting To X?
May 19, 2010Since today, I cannot start to X anymore. Grub loads, I let it start, then after a while screen goes black, stays black, puter not responding at all, screen goes to power save.
I can boot to safe console though but not start X there either.
So far I tried Memtest (no errors found) and apt-get update and upgrade. SafeX doesn't work.
Ubuntu :: Can't Install Lucid
Jun 2, 2010I have an old laptop that I want to install Lucid Lynx on from a flash drive but when i try to do so all I get is a blank screen after I select the language and the option to install.
Intel Celeron M 1389 MHz
2 GB RAM
120 GB HDD
Intel i855GM chipset
Ubuntu :: Sun Java 6 JRE In Lucid?
Jun 6, 2010I'm trying to install Sun's Java6 JRE since IcedTea isn't cutting it for me. Perhaps I'm going insane. If not, I've suddenly lost faith in my favourite distro. [URL]. Tells me that there aren't any Sun packages anymore.
sudo apt-get update
apt-cache search jre | grep sun gives nothing
apt-cache search java | grep sun:
sunflow - rendering system for photo-realistic image synthesis
sun-javadb-client - Java DB client
sun-javadb-common - Java DB common files
sun-javadb-core - Java DB core
sun-javadb-demo - Java DB demo
sun-javadb-doc - Java DB documentation
sun-javadb-javadoc - Java DB javadoc
cat /etc/apt/sources.list: .....
Ubuntu :: Anyone Using Winwrangler On Lucid?
Jun 26, 2010Apparently is not supported on lucid for some reason. I went and installed a jaunty package i downloaded from launchpad. It installed ok, including dependencies and all, but it's not working. I went and check the config file and notice that it was not even created.
I want this small app really badly. Would anyone help me to fix a workaround or point me the direction to a working package?
Ubuntu :: Getting Into Grub In Lucid?
Jul 5, 2010I have been struggling to get into Grub during boot. No matter how many times I reboot and hit the "esc" key.. runs right past Grub and into the splash screen. Every blue moon it will catch the esc and I get the grub menu. I have fixed my original issue by reinstalling the ATI support, but would like to know of any similar issues with Grub.
View 4 Replies View RelatedUbuntu :: Lucid: Cannot Run A PHP File?
Jul 6, 2010Am attempting to upgrade from Breezy to Lucid but not without a lot of problems The current brick wall is I cannot run a PHP file called from an HTM script.First I can run localhost/phpmyadmin and can access/modify my MySQL database.Second I can run localhost/test.php and see my PHP setup.Third I can run a local swf file successfully but it does fail when attempting to access processsData.php with "Can't access network" which was almost always caused by a PHP syntax error.I have run the php script through a PHP5 syntax checker with no error.Fourth I can run an htm script
Code:
<form action="processData.php" method="post">
<p>
[code]....
Ubuntu :: Unable To Use The KDE [4.5 RC] On Lucid
Jul 9, 2010I am rather irritated right now. I managed to install kde 4.5rc alongside gnome 2.30. And the 1st impression is barely ok. It seems stable and fast, but because wi-fi doesn't work for me, it's really limited in where it can go. Considering I'm typing this logged in thru gnome on the exact same system, connected to the wi-fi network kde refused to connect to, it's rather baffling. Update: Used networkmanager-gnome to get me connectd in before I login since network doesn't use security (even gnome doesn't play well with that.
KDE issues (some from 4.4.2 and still in 4.4.92). Plasma:
1.Tooltips aren't persistent, they shy away after a few seconds. Also they should update with data they're representing (yes system monitor, I'm looking at you);
2.Allow setting of colours for graphs e.g. ram monitor, cpu monitor. Was there but now gone;
3.A more convenient way to exit the plasma dashboard (right click on background perhaps?);
4.Individual wallpapers per desktop; (again, there before in 3.5)
5.Panel auto-hide show delay still not adjustable; choice for fade-in animation;
Kwin:
1.The present windows effect wastes a lot of space under 'natural' without 'presenting' the windows optimally; other setting (fixed & flexible grid) make programs like audacious look utterly horrible; the placement algorithm needs to be sorted;
2.Oxygen menus have too much border, give impression of bloat;
3.Kwin compositing freezes everytime I change decoration, style, font, etc. Have to use key shortcut to disable then re-enable. This is somehow connected to my system using more swap as time goes on, while mem usage remains ~40% (of 2gig)
Dolphin:
1.Ability to show basic media file metadata without need for nepomuk (as was possible in konqueror in 3.5.x), e.g resolution of jpeg/png/bmp images, id3 info from mp3/ogg/wma files; pdf [this marked as done in the feature plan, yet to see it)
2.More columns for sorting in details view (windows explorer excels in this). Above point will be needed before this is possible;
Amarok (2.3.1):
1.Still no proper use of album artist tag (for compilation albums and such) and/or proper detection of various artists listed in the 'artist' tag;
2.All embedded album art is useless;
3.Album art isn't shown prominently in the collection browser (22px crap doesn't count, the art itself is >300px);
4.Can't queue files from collection. Can queue from playlist, albums applet but not collection. Why?;
It is a stable pre-release software but stable can only get us so far. The basic features users have clamored for aren't being provided, resulting in my playing music with banshee and viewing my pics with geeqie.
Ubuntu :: How To Run Memtest86+ From Lucid CD
Jul 20, 2010Anyone know how to run memtest86+ from the Ubuntu 10.04 install CD without having to install Ubuntu? It used to be a menu option at boot, but now you just get the option to install or try Ubuntu. I want to test the RAM on an older system before I install.
View 9 Replies View RelatedUbuntu :: 10.04 Lucid Won't Install
Jul 27, 2010I'm running an AMD 64 system with 4 gigs of ram, and only have 32 bit windows. Since the update to Lucid I have yet to have it work properly. Every time I've tried to install it it ether over wrights my boot file, and I lose windows (a few programs I have to have in there)when I try a standard install or it fails to boot when I do the Wubi install. Is there any where I can re download the previous 46 bit version? I seam to have lost the ISO.
View 3 Replies View RelatedUbuntu :: How To Add Printer In Lucid
Aug 15, 2010I have a fresh install of 64bit Ubuntu Lucid and I can not install a printer in the manner that I have been doing for some years now. I would like to click on System --> Administration --> Printing and then Add but it is grayed out and the applet has not connected to the Cups Server. This is the long term service edition and it would seem that printing is broken: at least at this location.
View 2 Replies View RelatedUbuntu :: Figure Out How To Do This In Lucid
Sep 3, 2010[URL]I can't get it going.
View 8 Replies View RelatedUbuntu :: Get Cmucl In Lucid?
Sep 7, 2010The cmucl package is listed in lucid repository, but when I do sudo apt-get install cmucl, I get message suggesting to install common-lisp-controller.
How can I get cmucl in lucid?
Ubuntu :: Downgrade GDM To 2.20 In 10.04 Lucid?
Sep 9, 2010The result After following these instructions you'll get:
-GDM 2.20, with all the features(themes, feature complete, configurable...)
-No Plymouth, or any graphical boot (haven't found a way to run old gdm along with Plymouth)
These instructions are based on this post [URL] but they won't work on Lucid 10.04 Download GDM 2.20 on this link. Remove gdm and install the downloaded package.
Code:
sudo apt-get remove gdm
sudo dpkg -i gdm*.deb
sudo mv /etc/init/gdm.conf /etc/init/gdm.bak
Run these commands (related to a bug in this package):
Code:
cd /usr
sudo mkdir X11R6
cd X11R6
sudo ln -s /usr/bin bin
Disable the graphical boot (reason: Plymouth loads X, and old gdm can't connect, fixes are welcome)
-Edit /etc/default/grub and change
Code:
GRUB_CMDLINE_LINUX_DEFAULT="splash quiet"
to
Code:
GRUB_CMDLINE_LINUX_DEFAULT="quiet"
Run:
Code:
sudo update-grub2
Ubuntu :: No Sound In Lucid?
Sep 21, 2010I've gone through many different threads about sound problems with Lucid, but so far, nothing I've done has helped. I get absolutely no sound in this installation. Everything was working until I upgraded from Karmic.
For a while, I thought it might be my sound card, so I put in a new Sound Blaster card, but was still unable to get sound. I have since removed it, but still available if I need to re-install.
System particulars:
uname -a
Linux odin 2.6.32-24-generic #43-Ubuntu SMP Thu Sep 16 14:58:24 UTC 2010 x86_64 GNU/Linux
lspci -v
[Code]....
If I try to launch System->Preferences->Sound, I get a popup with "waiting for sound system to respond".
I've tried a number of things (including deleting the pulseaudio files, upgrading alsa etc) from my user but cannot get sound to work. correctly.
