Ubuntu :: Windows 7 Won't Boot - Displays Windows Logo And Then Drops Back To The Grub Menu
Jan 9, 2010
I have a Compaq Presario CQ60 with Nvidia GeForce 8200M graphics card. When I first installed Windows 7 followed by Karmic in dual boot I could boot into both OS. Now when I try to boot into Windows, it displays the Windows logo and then drops back to the grub menu. It may have started happening after Windows 7 installed updates. I tried reinstalling both Windows and Karmic again and it again worked initially but now Windows no longer boots. Does anyone have any suggestions about what may be causing this or how I can fix the problem without reinstalling?
how to be able to add windows 7 to my grub menu or to even be able to boot to windows 7. I am currently unable to do it and my system just automatically goes straight to ubuntu. I've tried holding down SHIFT during startup and all that appears in my list is ubuntu entries and a memtest entry. My windows 7 files are still intact because I can see the drive through ubuntu and see all my files. I am trying to have Windows 7 on one hard disk that is 640GB and ubuntu on a second hard disk that is 160GB
i have recently installed ubntu 9.10 and u wanted to dual boot it with xp that i already got installed i have installed it and than i didnt know how to get two my windows back becuse the grub menu didnt show and it had bugs . so i formted the ubunttu partion (to ntfs) with the live cd of it and now wiil now boot windows it showes me "grub recovery>" commend line somthing like that what to do to boot my windows back i am now with the live cd of ubuntu wrting you this.
I've got myself the curious situation where, when I boot the system, I can get grub to start, but it always drops to the prompt.
I can run:configfile /grub/menu.lst
and this brings up the menu with no problems, and from there I can boot the system to either linux or windows. What I don't understand is why it wont go to the menu in the first place?As far as I can tell, grub/Kubuntu got confused when installing, as each of the hd#,# settings in the menu.lst have needed tweaking to let the system boot. (e.g. windows is actually hd0, but the original install had it at hd2. Likewise linux is on hd1, but the menu.lst had it at hd0). I've happily tweaked these to make the system boot, but would appreciate any help in convincing grub to actually load the menu without me having to use the prompt.
I got ubuntu 10.04 lucid lynx along with windows (dual boot) and using Grub. On my computer, I have my C:/ (programs) and D:/ (data). I've never used my D:/ before that day that I've lost my windows partition on my grub menu. I usually use my D:/ with windows. The first time I used my D:/ to store data with linux, I lost my windows option in my grub menu. I'm not sure what I did wrong but I do want to restore my windows option in my grub menu.
After "fdisk -l",
I checked in /boot/grub and there is no menu.lst to modify. how I can get back my windows option in my grub menu ?
I have an Acer Aspire 5810T which came with Windows Vista. I prefer Ubuntu but I need some windows applications so I dual-booted Vista and 9.10.
There was a few minor problems with the Vista side but I didn't use it enough to care. A few weeks ago Vista would not open some programs and others would shut down automaticly and some would open but not connect to the internet like they should. This happened on my previous laptop and when I used the system recovery discs to restore the computer all those issues were gone.
I used the recover discs to restore everything to its original factory settings, it said everything was successful so I restarted. My computer got to the grub menu but when I chose Windows Vista as my operating system it goes black for half a second then returns to the grub menu.
I can get into Ubuntu fine, and I can see the Vista files when I mount the drive to Ubuntu. When I look at the files everything is the way it should be if I had restored it but I can't boot it..
I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code: Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ==============================[code].....
I upgraded to Ubuntu 10.04 recently and now have MBR problem. When selecting Windows XP from the GRUB menu the screen defaults to terminal mode with grub rescue> displayed. I admit I know little to nothing about Ubuntu, unix, etc other than I like what I have seen so far and am trying to learn more. I need to (unfortunately) use Windows and have data on it that I can't afford to lose. How can I repair the problem so I can boot Windows from the menu? Thank you
P.S. I was dual booting successfully earlier. I had the previous version of Ubuntu running with Win XP and everything was fine. The problem started when I upgraded to Ubuntu 10.04. I have tried reinstalling 10.04 with no success. If I am unable to get dual boot working my wish would be to save my Win data and then I can wipe clean and reinstall Win and Linux.
i am having a problem with my dual boot setup. I originally installed windows XP on a 100gb hard drive, from there i downloaded and burnt ubuntu off so i could install it on my 200gb hard drive. For a little bit i struggled to even get it to install because it wouldn't recognize my onboard nvidia graphics, i ended up having to get an alt boot disk and fix it with technique in this link:
[URL]
Now after the bios boot, my screen shuts off for awhile and takes me directly to the login screen for ubuntu. No Grub, no windows boot options, nothing. I tried booting windows by choosing it from the bios boot menu but all it does is hang at prompt and doesn't boot at all. I tried the live cd fix and reinstalled grub but nothing changed. What i think is happening is that it boots the Grub menu but it doesn't display it because of graphical confrontations. It hangs for about 10 seconds, the grub default time, and then turns my monitor back on to display the Ubuntu login screen.
It would be nice to get a sticky thread up for dual boot installation issues. It seems like this is a very common problem with the upgrade from 9.10 to 10.04.
I was finally able to solve my issue dual booting 10.04 and Windows XP Home at this thread.
[URL]
I had to reinstall Grub2 and run update-grub.
Then I had to run Rescue on my XP disk. Once to the DOS command line I ran the following command:
C:Windows>fixboot c:
I rebooted and now all is well. I can boot to Ubuntu 10.04 or Windows XP from my Grub menu.
Whenever I load Ubuntu on a machine with other OS(s) loaded it always recognizes and adds an entry in the bootloader menu. Not this time. Well kind of. After the install my windows boot option was in the menu, but after an update it is no more. I see the different Linux images... but no Windows boot option. Can someone tell me how to add my windows XP boot option back to the bootloader? I have XP on the the on the 5th partition and Ubuntu on the 6th...
Since upgrading to Lucid (I think), I can't boot into Windows. When I select the Windows Vista entry in GRUB, the screen goes blank for a moment before returning me to the GRUB menu.I have tried pressing 'e' to edit the GRUB entry before booting, and what I find is that it says the root is hd0,1Since my Windows partition is sda1 in GPartEd, should that translate to, for example hd0,0 ?The only reason I want to boot into Windows in the first place is to install a BIOS upgrade from HP, which only works with their Windows software. If someone can suggest an alternative way of doing this then I won't need to boot into Windows at all.
I hav two 40 GB hard disks.RHEL5 is installed on 1st and Windows on 2nd. In order to use each OS I manually hav to go and change the "first boot device" option in BIOS setting and boot into required OS. GRUB doesn't show Windows in its boot menu.How can I make GRUB recognize Windows and boot into both OS using GRUB boot menu?
I installed Ubuntu as a dual-boot system with Windows XP very carefully. Unfortunately, though given the option to boot Windows at the grub menu, when I select it, I get an error. Booting Ubuntu on my other partition works just fine, no issues.
I also attempted to access files from the first partition in Ubuntu using gparted, but once I mounted it, all of my files were not present. I only saw manufacturer files, and many files and folders I didn't recognize.
Also, as an aside, my laptop monitor is suffering from occasional black-outs during use. Ubuntu gave me a little toolbar flag, telling me to go to a website and use the patches given to fix it, but I'm not quite so sure where to input the given patch text. Do I really need to go through the trouble of finding the source code, etc., or is it more simple?
I just got a Zino HD from Dell, and was planning to use it connected to my TV, dual booting Xubuntu 10.04 and Windows 7. I did, however, run into some issues. I suspect I'm just going to have to burn a restore disc and start over, but I'd like to fix this if possible. Here's what I had to start with:
Because the restore partition was a bloody 20 GB, and I could always get the restore done via disc, I reformatted it as ext4 and used it as "/". I then shrunk the Windows partition and allocated a home partition and some swap space. Note that immediately after the installer, I reformatted the home partition manually with an inode size of 128 to use with the Windows ext2 driver, but that shouldn't have really changed anything. End result file system order:
1 vfat 1 ext4 mounted as "/" 1 Windows 1 Swap 1 ext3 mounted as "/home"
I now have two problems:
1) I do not get any GRUB menu at all! It just boots directly into Xubuntu with no choices (not even memory test or restore mode). 2) I, obviously, can no longer boot Windows.
Keep in mind that this a fresh install on a brand new machine; I can't think of any reason GRUB wouldn't even show me a menu.
I have just updated my Ubuntu linux to Ubuntu 10.4, not my grub menu isnt letting me boot to Windows Partition.The problem seems to be with grubs new update from using an editable menu.lst file to using a non editable grub.cfg file. Everywhere I look it states "DO NOT EDIT THE GRUB.CGF FILE". I am at a loss as what to do. I figured that the new configuration has screwed up the Windows Boot File. Anyone have any suggestions on how to fix this. I am not sure if it is a windows issue or an issue with the Grub boot menu.
i have just discoverd i can't enter my windows 7 via grub boot menu i get error 13 Invalid or unsupported executable format what can i do? # This entry automatically added by the Debian installer for a non-linux OS # on /dev/sdb1
I'm trying to install ubuntu from a disk I got with a Ubuntu manual magazine, but once I choose the install option, the logo glows for a couple minutes then freezes and nothing happens. The same happens for running it without installation. Does anyone know what I should do? I'm currently downloading it onto a USB stick to attempt to boot it from that.
I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
Whenever I select Windows 7 under GRUB, it just hangs at a flashing underscore windows 7 is installed under my first primary partition, what should the GRUB section look like for it? I can't check what mine looked like because this happened:I started up the windows 7 recover (another option under GRUB, on hd(0,3). 7 is on hd(0,1)) and it worked. I decided that i wanted to try something else before i restore my windows 7 partition to its factory state, so i exit the recovery thing. Next thing I know, my Ubuntu partition is completely gone, along with my grub.cfg files -.-
Partitions are like this in this order: sda1: Windows 7 (can't boot into) sda8: ubuntu (gets erased) sda5: partition i'm going to use soon for another distro
[Code]...
oh, and by default, there was like 20 MB of free space in front of my windows partition (idk why asus did that) and when i shrunk my first partition (the windows one) it moved it all to the left -.- do you think something when wrong while doing that?
3 partitions (in order): Windows 7, CentOS and shared data partition.
I need to increase the size of the Windows 7 partition (c:windowswinsxs seems to be something not easily remedied).
GParted didn't work in moving things around (bad sector) so I wiped out its partition (# 2 out of 3) and I was able to increase the size of the Windows 7 partition (I can reinstall CentOS easily and not much work lost).
Except ... no more grub menu (unsurprising). This incantation does allow me to boot into Windows 7.
Is there any way of rebuilding the grub menu short of reinstalling CentOS (5.5)?
On my notebook there was a preinstalled OEM Windows 7 Home Basic (disk C, sda1). I installed Ubuntu 10.10 on disk D, and was not using Windows 7 any more, although the "seventh" was present n main loading menu and in grub menu. 2 days ago I discovered, that in grub menu appeared "Windows Vista (Loader) - sda1" ! I didn't install it, and I'm sure that nobody else had access to my notebook. "Windows 7 (Loader)" now links to sda2.
When I try to run this strange "Windows Vista (Loader)", appears the Windows loading screen, than the empty Windows desktop background, and than the system reboots. How can Windows Vista (Loader) appear in grub, if nobody installed it? Can it be an imitation of Vista loader, made by some malware? How to remove this item from grub?
I have a used PC that came pre-installed with suse 11.2.Unfortunately, I do not have the install disk to use in case of whatever.I already know that when configuring a dual boot with Windows and Linux, it is recommended to install Windows first.I do not have that luxury now as 11.2 is installed and GRUB is the boot loader.Question is, if I boot the Windows 98 install disk on boot, how to not mess up GRUB and still add Windows 98 to GRUB menu?
One hard drive only here. 98gb free.It seems that W98 install will overwrite GRUB in this situation - causing problems. Maybe not, I don't really know for sure.I just need to install windows 98 on the same hard drive and if possible, have suse and w98 visible on boot in GRUB.
I just did a fresh install of Windows XP Home Edition and then a fresh install of Ubuntu 10.10. I can't get Grub2 to find the Windows partition using the prober though. Here is the output of the Boot_Info_Script005 file.
Code:
Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #6 for (,msdos6)/boot/grub.
I had Vista loaded on my computer, then loaded the BRILLIANT ubuntu onto a second partition! This gave me the GRUB boot loader which is fine.My 2 points are;1. Can I change the position of the items in the GRUB loader so if no keys are pressed it loads Windows automatically?? (Its for my sons computer!!) Also can I edit the GRUB so its less complicated for him??2.I want to update his Windows to Win 7, free upgrade! This over rights the Win partition and will therefore get rid of my GRUB loader. When I have updated how can I get back the ability to chose between booting Win 7 and Ubuntu?? How do I get the GRUB back?
I installed ubuntu on my lappy but due to battery life reasons and driver issues I cannot use it; must return to windows . I do not want GRUB on it but I'm stuck with it now. how do I wind the clock back?
I am using Ubuntu 10.10, manually installed, on a Dell Studio 15 laptop, dual booting with Windows 7.While a few kids were playing nearby where I was working, one of the pillows they were playing with hit my laptop's screen and moved the screen's hinge backwards, applying pressure past where the hinge ends. This didn't seem to cause any physical harm to the computer, but I moved away from where they were playing, and in the process, shut the laptop, putting it into sleep mode. I opened the laptop and entered my password to unlock it. About half a second after entering my password and displaying the desktop and open windows, it brought up the password prompt again, as if I'd just opened my laptop up and removed it from standby, although I had not in fact touched it since I had entered my password a mere half second before. I thought that that was strange, and then attempted to continue my work. However, although the mouse worked fine, when I attempted to apply a keyboard shortcut (Ctrl+Alt+2, which runs a 2-finger scroll script and has to be run every time I take the computer out of standby), Ubuntu didn't register it (I didn't touch the keyboard otherwise, although I should have checked whether it worked all =).
I tried it again, and it still did not apply the script. Then I thought, "Oh, the pillow must have knocked something out of whack. I'll restart." When I restarted, grub loaded as usual, but the timeout ("loading the primary in Xs." sort of thing) that it usually displays did not display this time. I didn't notice it at the time; I selected Ubuntu, and it appeared to be loading it, removing the grub menu, but then hung. I waited 5 minutes for the computer to display the login screen, but it did not, so I restarted again, thinking that it might just be something stupid. It didn't work again, hanging again. I tried this with both the most recent linux kernel and the second most recent kernel, neither of which worked. But what was interesting is that Windows 7, which is also on the grub menu, loaded and displayed perfectly, as did GRUB Invaders, a game that can be loaded directly from grub.After this little escapade, I thought something was just wrong in grub.cfg, and it somehow wasn't mapping the Ubuntu menu entries to the appropriate OS and kernel. So I loaded up a live CD, and attempted to look at the linux entries. These are the menu entries 10_linux, 00_header, and 20_linux_xen.
10_linux:
Code:
#! /bin/sh set -e # grub-mkconfig helper script. # Copyright (C) 2006,2007,2008,2009,2010 Free Software Foundation, Inc.
I have windows 7 home premium currently installed and I have just recently installed Linux Mint and it has replaced my MBR with GRUB. Is there any way I can restore the normal Windows 7 Boot Loader and have the secondary option to boot my Linux Mint?
