Debian :: Black Flashing Screen After Bootup?
Apr 1, 2010
I'm using debian for the first time and I recently downloaded the Debian Lenny 201 Live CD to test it on my old computer (I'm planning to use Debian 5.0.4). It has a Pentium III (550 MHz) processor, 192 MB RAM, 8 MB graphics memory, 20 GB HDD with a monitor supporting 1024x768 resolution. The problem is, after the booting is complete a blank flashing screen appears with a cross-shaped cursor in the middle. I continues and nothing happens. I tried with solutions like editing the entries with 'live xdriver=fbdev', 'live xdriver=none', and 'live vga=771'.
View 10 Replies
ADVERTISEMENT
Jun 1, 2010
After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
View 2 Replies
View Related
Jun 26, 2010
Once I installed it I've been having a problem where the screen flashes black for a split second. i looked up the problem and found this:I navigated to the directory it said, but I don't have an "options" file. What should I do? Are there any other fixes for this? It's quite an irritating problem.
View 1 Replies
View Related
Feb 22, 2010
so I installed fedora 12 last night, everything was fine. Installed some things, moved music over, etc. (Dual booting with windows vista btw) So I install my graphics card driver, (ATI Radeon HD 3200) and I reboot. When I open the bootloader (I think thats what it is), It starts to boot, then just has a black screen with the flashing underscore. I can type and stuff but nothing happens.
View 6 Replies
View Related
Jan 21, 2010
I have just wiped my whole hard drive to install a fresh copy of Ubuntu on it, and now as soon as i power it up it passes the POST screen and black screen shows up with a flashing cursor. I bliv it should say no operating system and pick the USB which has Ubuntu installation on it.I have formated the hard drive to NTFS, the system is Samsung NC10.
View 9 Replies
View Related
Mar 7, 2010
When I try and install Ubuntu 9.10 it gets to the flashing Ubuntu logo, then the screen just goes black. It then says: (initramfs) Unable to find a medium containing a live file system. I also tried the disk on a another computer and it worked fine, and I've installed Ubuntu 7.10 on this computer before without a problem.
View 9 Replies
View Related
Jul 15, 2010
on a cold computer randomly appears black screen with white flashing stripes up to half of the screen preceded by a message "checking battery state... [OK]". - ubuntu 10.04 LTS
- desktop compaq evo d510 sff
- intel 82845G/GL[Brookdale-G]/GE chipset integrated graphic device keyboard is not active on that black screen, BIOS settings look OK
View 9 Replies
View Related
Dec 15, 2010
I installed Ubuntu 32-bit v. 10.10 on a Dell Optiplex GX270, after installation i had to reboot, but then when rebooting it just goes to a black screen with a flashing
View 1 Replies
View Related
May 25, 2011
i just installed slackware 13.37 which worked fine but when i boot it up it runs a number of lines and then the screen just goes black... i can login as root blindly and start x (i THINK, judging from hdd led)... but screen stays black... its a laptop and closing/opening the lid doesnt work either...
i am dualbooting with slack 13.1 which runs fine... it switches screen res at some point during boot (font is smaller) and i would say that is the point where the screen goes black in 13.37...
View 14 Replies
View Related
Mar 21, 2010
I can't get Ubuntu 9.10 to install... I downloaded ISO image from official web, Then I burn it on blank CD-R using lowest speed available from Nero 6, After that I go to BIOS and change that CD-ROM will boot first; Done. After that i reboot with CD-R, and it boots! Yea!, I press "Install Ubuntu", it goes to black screen with flashing Ubuntu logo at middle of it, After 1-2 minutes i turns black, ouch!, I press "Enter", and there is a error message, something like this...
[Code]...
View 3 Replies
View Related
Nov 20, 2010
I have just recently installed Linux Lime along with windows 7 Home Premium. Before, there would be a menu asking me which operating system I would like to use. When I click linux it goes to linux and windows 7 goes to windows 7. Now when I click Linux, the black screen you get at the beginning shows a - (dash) constantly flashing on a black screen and won't boot to linux. This is normal as it does that for a second then boots. Now its stuck on that flashing dash on a black screen and won't boot.
View 1 Replies
View Related
Apr 24, 2011
I am trying to boot up my computer which has the Ubuntu 11 beta AMD 64bit, but before I can reach the login screen I get a black screen with the word "Killed" in the top left-hand corner. If I attempt the recovery boot I get different messages.
View 9 Replies
View Related
Dec 17, 2009
I have installed F12 on the remaining space on my disk and now Windows does not boot anymore. I get to Grub and choose windows and then just get black screen with flashing cursor.
View 8 Replies
View Related
Apr 23, 2010
As the topic says. I'm having problem after problem, everytime I figure out a way to take a step forward, my PC has pre-emptively taken a step back.
I'm unable to boot to X or (recovery mode).
I did try booting to a LiveUSB in order to run update-grub, but then it occured I have no idea how to do this from a LiveUSB that will affect the internal HDD installation?
So I'm currently trying to reboot from Live USB, but that just seems to have locked up the PC on the white ubuntu logo. I'm afraid to hard reset it (been doing too much of that lately). How long should a Live USB take to shutdown? (been about 10 minutes so far ). It's not a persistent LiveUSB as far as I know, and I basically just booted to the desktop and then start the reboot cycle as soon as I realised I didn't know what I wanted to do .
View 8 Replies
View Related
Dec 24, 2010
I deleted both the partition with archlinux and the swap in order expand the windows xp partition. I am now unable to boot, just as gparted warned me. When I turn my computer on, it just goes to a black screen with a flashing underscore.
I cannot type anything, but cntrl-alt-dlt does restart. I have been attempting to restore grub and/or windows's boot method for the last 24hrs. The main things I've tried were the instructions here and using super grub disk. However, I have not been successful. I am running an Ubuntu live disk. At the moment, I just want to be able to run windows, but do not have an xp disk because this laptop was issued from my old college.
View 9 Replies
View Related
Jan 29, 2011
After installing Ubuntu Server 10.04 LTS, I restarted my machine. I removed the disk, but now when it starts, it never gets to GRUB. Instead, it just takes me to a black screen with a blinking cursor. I can't type in anything and holding shift doesn't take me to GRUB.
View 9 Replies
View Related
Dec 20, 2010
My computer keeps having some kind of meltdown. i really cant explain it other than the screen will go black, and then it will start flashing like white bars, or different colored bars. this happens at such random times i cant exactly pinpoint what sets it off.
the only thing i may have a clue to is that in my update manager, there is one thing that is a distribution update that i cant check to have it installed or anything like that. its then "Gij" and its description is it is "the gnu java bytecode interpreter" i just dont know if i should just go back to an earlier form of ubuntu because these problems didnt start happening until i upgraded to the new ubuntu
View 7 Replies
View Related
Feb 16, 2010
I have re-installed Fedora 3 times, each time, after a little while of use, when I am botting it up, it loads up, and before the login screen appears, the screen just goes black, and I end up with just a black screen and a white line in the top left corner flashing, thus resulting in me not being able to log in. The exact same has happened a number of time
Could it be something I had installed? Also, whilst using it, on the third install, a few times a message appeared telling me there was a kernel error, could this be linked to the problem? I was running Fedora in GNOME, but I had KDE installed too.
View 11 Replies
View Related
Apr 4, 2010
I have an old machine running Ubuntu 9.10 and XP.t is a P4 and Nvidia FX5200 card.Yesterday all of a sudden the screen started flashing black, the same type as when you install new graphics drivers and the resolution is changing. Only here it keeps happening over and over, the mouse isn't usable fully, the icons and menus are distorted, and I basically can't do anything.
I ended up reinstalling 9.10 and everything was working fine until I installed EnvyNG to get my nVidia drivers. It required a restart, and once I logged in the same thing started happening. So I said screw this, and installed 8.04. Yet even in 8.04, once I used EnvyNG to install the drivers, the same thing happened.A few other detailsP works fine, although one time a similar thing happened on XP (not as bad), and was fixed with a reboot.- This PC runs through a KVM switch, but I connected it directly and the same thing happens.I've found no help via Google. Sounds like a possible hardware problem, but it seems to work fine in XP and only acts up in Ubuntu once I install drivers.
View 7 Replies
View Related
May 12, 2010
i thought i would give ubuntu 10.04 a try. So i downloaded the iso twice from two differant sources and burned to 2 diff dvd with diff burners and get the same problem. When i boot off of the disk i get the menu but whether i choose install are run live cd it just sits there for a sec are 2 then goes to black screen with flashing white bar in upper left hand corner and thats all it does. even tried my 9.10 disc which i know works. but it does the exact same. I have purchased a new video card since i last ran ubuntu and its the nvidia gtx 260 core 216. would that be whats causing my problems?
View 1 Replies
View Related
Jun 29, 2010
I installed Vista on my Acer 64-bit laptop first, then installed Ubuntu 9.10 in a dual-boot configuration. And when I start up my computer, Windows Vista is an option in the Grub menu. But when I use the grub loader to load Vista all I see is a black screen, with a flashing underscore character (it looks a lot like a terminal screen, waiting for input). The screen just stays like this, too - I timed it once, and 13 minutes later it was the same.
View 9 Replies
View Related
Jul 1, 2010
I am trying to boot up Linux Mint 7 after a packages upgrade and it boots up but then it shows this and stalls.And similar messages for GDM and then it just shows a black screen with a single blinking cursor on the middle left of the screen. I cannot do anything except press the CTR-ALT-DEL combination to re-boot, then it shows the usual shutting down messages and does the re-boot.I am running the 2.6.28-19 kernel and I have upgraded the Ubuntu packages on my Linux Mint 7 system from Jaunty to Karmic. Please help as I do not want to re-install. I am running Knoppix 6.3 ATM and I should be able to chroot from that if necessary. I am booting from /sda1 that has Linux Mint 8 installed and grub 1.97.
View 1 Replies
View Related
Jan 11, 2011
this is my first time doing a custom partition, I tried to do it with only the assistance of reading as I go, but I don't believe I found enough information last night. What I am trying to do, is put openSUSE on 200gb out of 500gb space on my external hard drive, as well as on 50gb space out of 110gb on my internal hard drive. The remaining 60gb space on my internal drive is going to be for microsoft windows. The remaining 300gb space on my external drive will be storage space. It seems like what I want to do is achievable
What I want is to have my main openSUSE on the external drive (primary partition I think?), with the GRUB loader so that when the external drive is not plugged in, my little brother can use windows on my internal hard drive. I tried this last night, and when installation had finished, I rebooted my computer and the screen was just blank black with the flashing white line as if waiting for me to type, although it would not allow me to type when I tried. It would be great if someone could tell me the order in which to partition, including the terms primary partition, extended partition, and logical partition, as needed.. I don't want to permanently muck up this machine.
View 7 Replies
View Related
Apr 27, 2010
Pretty much what the title says.. a few more details:
- I installed 10.04 using the alternative install so I've been doing all this in safe mode
- I installed a newer kernel (2.6.33) and still black screen
- I tried to install an updated Intel xorg driver, but I kept getting dependency errors (xorg, x11, something else)
I read another thread on this forum from a user who is using the same platform (Intel HM55), and I got stuck at the last point (can't get Intel xorg driver to install).
View 4 Replies
View Related
May 5, 2010
I cannot install Ubuntu 10.04, or even boot into the live CD. I'm not an expert, but I've used Ubuntu for several years, and I'm pretty sure I'm not doing anything stupid... Here's what happens when I boot with the Ubuntu 10.04 live CD: I get a purple screen with just an accessibility(?) symbol at the bottom (this lasts 15 seconds). The screen goes black, with a flashing cursor, then changes back to purple, this time with an Ubuntu logo, with 5 dots acting as a progress indicator (this lasts about 1 minute). The screen switches to standby. The CD drive continues to make noises for another minute or so, then stops.
I physically removed my graphics card (ATI Radeon HD 5770), and plugged the monitor straight into the VGA port on the motherboard. Now the CD boots up fine. I could try installing Ubuntu at this point, while my graphics card is unplugged, and then plug my graphics card back in, and see if it starts working then.
View 9 Replies
View Related
Jun 29, 2011
I had switched over from Windows to Ubuntu and got rid of windows completely but still had the recovery partition and deleted it. I then tried to add that space to another partition, "Media." For whatever reason it deleted the "Media" partition so I used TestDisk to restore it. I did something wrong and when I rebooted my computer it would not boot so I used my LiveCD to check whats wrong and it had deleted all of my partitions and Ubuntu was nowhere to be found.
So I used TestDisk again to recover them, this time it was successful. The problem now however is that when I start my computer it does not boot into Ubuntu it just shows a black screen with the white underscore ("_") flashing in the corner. I'm not sure but I don't think it is booting into the correct partition, I think it would be trying to boot the first partition, /dev/sda1, rather than /dev/sda3. If this is the problem how could I fix it?
View 9 Replies
View Related
Jun 29, 2011
I had switched over from Windows to Ubuntu and got rid of windows completely but still had the recovery partition and deleted it. I then tried to add that space to another partition, "Media." For whatever reason it deleted the "Media" partition so I used TestDisk to restore it. I did something wrong and when I rebooted my computer it would not boot so I used my LiveCD to check whats wrong and it had deleted all of my partitions and Ubuntu was nowhere to be found. So I used TestDisk again to recover them, this time it was successful. when I start my computer it does not boot into Ubuntu it just shows a black screen with the white underscore ("_") flashing in the corner. I'm not sure but I don't think it is booting into the correct partition, I think it would be trying to boot the first partition, /dev/sda1, rather than /dev/sda3. If this is the problem how could I fix it? I got all the boot loader information, here it is:
[code]...
View 1 Replies
View Related
Dec 17, 2010
I initially installed Debian Lenny on my system but couldn't get sound to work so I upgraded to squeeze hoping that the newer kernel would somehow fix that. Unfortunately, the update caused the screen to flash on and off starting at the login screen - I'd get a split second with the screen on and then it would go off for a second or two. The boot screen still allows me to boot from Lenny's linux kernel, and that still works. I also had this problem when I installed ubuntu on this computer so after some searching around I remembered that adding radeon.modeset=0 as a boot option fixed this. Now the screen no longer flashes, but everything is really slow - I think that disabled graphics acceleration? After some searching around it seems that these problems are probably caused by something called KMS in newer linux kernels but I don't really know.
Anyway, does anyone have any ideas as to how I could turn on graphics acceleration again without having the screen flashing on and off? Or suggestions for making sound work? I think in the past (on ubuntu) I ended up having to enable the proprietary graphics driver, but on the other linux distros i've tried I used proprietary graphics and flash and my computer got slower and slower and started to crash, so I'd rather stick to the open source driver if possible - i don't need really need 3d acceleration. Stability is the reason I switched to debian. My computer is running Debian squeeze amd64, intel core 2 duo e8400, ati radeon 4830, 4 gigs of ram. relevant results from lspci: 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller. 01:00.0 VGA compatible controller: ATI Technologies Inc RV770 LE [Radeon HD 4800 Series] 01:00.1 Audio device: ATI Technologies Inc HD48x0 audio maybe part of the audio problem is that there are two audio devices listed?
View 1 Replies
View Related
Aug 26, 2015
After an aptitude safe-update my laptop doesn't boot any more.
I recorded the following video of the boot process: [URL] ....
The disk is fine (I ran fsck), GRUB in OK. Could it be X?
I can boot in safe-mode and also have internet connection, so not everything is lost ...
View 10 Replies
View Related
Feb 22, 2011
another post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
View 9 Replies
View Related
