When I try and install Ubuntu 9.10 it gets to the flashing Ubuntu logo, then the screen just goes black. It then says: (initramfs) Unable to find a medium containing a live file system. I also tried the disk on a another computer and it worked fine, and I've installed Ubuntu 7.10 on this computer before without a problem.
View 9 RepliesI can't get Ubuntu 9.10 to install... I downloaded ISO image from official web, Then I burn it on blank CD-R using lowest speed available from Nero 6, After that I go to BIOS and change that CD-ROM will boot first; Done. After that i reboot with CD-R, and it boots! Yea!, I press "Install Ubuntu", it goes to black screen with flashing Ubuntu logo at middle of it, After 1-2 minutes i turns black, ouch!, I press "Enter", and there is a error message, something like this...
[Code]...
After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
I have just wiped my whole hard drive to install a fresh copy of Ubuntu on it, and now as soon as i power it up it passes the POST screen and black screen shows up with a flashing cursor. I bliv it should say no operating system and pick the USB which has Ubuntu installation on it.I have formated the hard drive to NTFS, the system is Samsung NC10.
View 9 Replies View RelatedI installed Ubuntu 32-bit v. 10.10 on a Dell Optiplex GX270, after installation i had to reboot, but then when rebooting it just goes to a black screen with a flashing
View 1 Replies View RelatedTrying to install Ubuntu 10.04 desktop (amd64) on this brand new system:
I connected the Dell ST2410 24" Full HD Widescreen LCD to the HDMI port on the ATI card and Windows 7 boots up just fine.
So then I put in the "ubuntu-10.04-desktop-amd64.iso" CD in drive and reboot the system. I see the Ubuntu logo with the dots for a while and then the LCD goes black. The LCD reports that there is no signal from the system. The power light in front of the LCD goes from white to amber. The keyboard stops responding.
I power off everything, remove the Ubuntu CD and reboot the system and it works fine again with Windows 7.
The CD has no problems. At boot time, I checked it for defects and it reports no errors. At boot time, I used this same CD to check the system for memory errors. No memory errors. I used the same CD to install Ubuntu on other systems and had no problems.
The 16X DVDRW Drive has no problems. In Windows 7 it can play CDs and DVDs.
After installing Ubuntu Server 10.04 LTS, I restarted my machine. I removed the disk, but now when it starts, it never gets to GRUB. Instead, it just takes me to a black screen with a blinking cursor. I can't type in anything and holding shift doesn't take me to GRUB.
View 9 Replies View RelatedI have installed F12 on the remaining space on my disk and now Windows does not boot anymore. I get to Grub and choose windows and then just get black screen with flashing cursor.
View 8 Replies View Relatedi thought i would give ubuntu 10.04 a try. So i downloaded the iso twice from two differant sources and burned to 2 diff dvd with diff burners and get the same problem. When i boot off of the disk i get the menu but whether i choose install are run live cd it just sits there for a sec are 2 then goes to black screen with flashing white bar in upper left hand corner and thats all it does. even tried my 9.10 disc which i know works. but it does the exact same. I have purchased a new video card since i last ran ubuntu and its the nvidia gtx 260 core 216. would that be whats causing my problems?
View 1 Replies View RelatedI cannot install Ubuntu 10.04, or even boot into the live CD. I'm not an expert, but I've used Ubuntu for several years, and I'm pretty sure I'm not doing anything stupid... Here's what happens when I boot with the Ubuntu 10.04 live CD: I get a purple screen with just an accessibility(?) symbol at the bottom (this lasts 15 seconds). The screen goes black, with a flashing cursor, then changes back to purple, this time with an Ubuntu logo, with 5 dots acting as a progress indicator (this lasts about 1 minute). The screen switches to standby. The CD drive continues to make noises for another minute or so, then stops.
I physically removed my graphics card (ATI Radeon HD 5770), and plugged the monitor straight into the VGA port on the motherboard. Now the CD boots up fine. I could try installing Ubuntu at this point, while my graphics card is unplugged, and then plug my graphics card back in, and see if it starts working then.
I've installed Ubuntu on another PC and most things are great except fore the black screen that you get when you start the PC (just before the Ubuntu Logo). It stays black for 20 seconds. Is there something I can do to make it shorter like on my other PC.
View 9 Replies View RelatedOnce I installed it I've been having a problem where the screen flashes black for a split second. i looked up the problem and found this:I navigated to the directory it said, but I don't have an "options" file. What should I do? Are there any other fixes for this? It's quite an irritating problem.
View 1 Replies View Relatedon a cold computer randomly appears black screen with white flashing stripes up to half of the screen preceded by a message "checking battery state... [OK]". - ubuntu 10.04 LTS
- desktop compaq evo d510 sff
- intel 82845G/GL[Brookdale-G]/GE chipset integrated graphic device keyboard is not active on that black screen, BIOS settings look OK
I'm using debian for the first time and I recently downloaded the Debian Lenny 201 Live CD to test it on my old computer (I'm planning to use Debian 5.0.4). It has a Pentium III (550 MHz) processor, 192 MB RAM, 8 MB graphics memory, 20 GB HDD with a monitor supporting 1024x768 resolution. The problem is, after the booting is complete a blank flashing screen appears with a cross-shaped cursor in the middle. I continues and nothing happens. I tried with solutions like editing the entries with 'live xdriver=fbdev', 'live xdriver=none', and 'live vga=771'.
View 10 Replies View Relatedso I installed fedora 12 last night, everything was fine. Installed some things, moved music over, etc. (Dual booting with windows vista btw) So I install my graphics card driver, (ATI Radeon HD 3200) and I reboot. When I open the bootloader (I think thats what it is), It starts to boot, then just has a black screen with the flashing underscore. I can type and stuff but nothing happens.
View 6 Replies View RelatedI have just recently installed Linux Lime along with windows 7 Home Premium. Before, there would be a menu asking me which operating system I would like to use. When I click linux it goes to linux and windows 7 goes to windows 7. Now when I click Linux, the black screen you get at the beginning shows a - (dash) constantly flashing on a black screen and won't boot to linux. This is normal as it does that for a second then boots. Now its stuck on that flashing dash on a black screen and won't boot.
View 1 Replies View RelatedAs the topic says. I'm having problem after problem, everytime I figure out a way to take a step forward, my PC has pre-emptively taken a step back.
I'm unable to boot to X or (recovery mode).
I did try booting to a LiveUSB in order to run update-grub, but then it occured I have no idea how to do this from a LiveUSB that will affect the internal HDD installation?
So I'm currently trying to reboot from Live USB, but that just seems to have locked up the PC on the white ubuntu logo. I'm afraid to hard reset it (been doing too much of that lately). How long should a Live USB take to shutdown? (been about 10 minutes so far ). It's not a persistent LiveUSB as far as I know, and I basically just booted to the desktop and then start the reboot cycle as soon as I realised I didn't know what I wanted to do .
I deleted both the partition with archlinux and the swap in order expand the windows xp partition. I am now unable to boot, just as gparted warned me. When I turn my computer on, it just goes to a black screen with a flashing underscore.
I cannot type anything, but cntrl-alt-dlt does restart. I have been attempting to restore grub and/or windows's boot method for the last 24hrs. The main things I've tried were the instructions here and using super grub disk. However, I have not been successful. I am running an Ubuntu live disk. At the moment, I just want to be able to run windows, but do not have an xp disk because this laptop was issued from my old college.
Once I select Ubuntu 9.10 from Grub, it shows the logo, the logo disappears, a jet black screen shows with 2 horizontal white dashes appear at the top.
I recently uninstalled Firefox 3.6 pre using synaptic to go with the stable Firefox 3.6 installed with the PPA repository that was given in the Ubuntu wiki. It installed and ran fine but when I rebooted, ubuntu wouldn't start.
I went into recovery mode a few times, tried to fix any broken packages and when it said it was fixed, I tried rebooting and the same error occurred. I also tried to use dpkg-reconfigure for the xserver-xorg and then ran startx but x didn't load properly. Some more debugging and a few driver errors came up involving intel so I installed a package which fixed that.
Ran the dpkg-reconfigure again and ran startx. This time x loaded but it was a jet black screen and I had to hold ctrl + alt and hit a few F keys to get back to the prompt.
I understand this could be a xulrunner error so I tried reinstalling xulrunner-1.9.1. I also rolled back my repositories to get the Firefox 3.5 branch and I installed the original Firefox 3.5, ran firefox --version to make sure and I finally have that back installed.
I tried rebooting and running the OS normally, but again it failed at the same point. What exactly should I do next? Yes, I could reinstall but it's such a small problem with maybe 1 or 2 broken packages, is there anyway I can save my current ubuntu system (as I have made countless configuration changes months ago and I do not want to do it again)?
My computer keeps having some kind of meltdown. i really cant explain it other than the screen will go black, and then it will start flashing like white bars, or different colored bars. this happens at such random times i cant exactly pinpoint what sets it off.
the only thing i may have a clue to is that in my update manager, there is one thing that is a distribution update that i cant check to have it installed or anything like that. its then "Gij" and its description is it is "the gnu java bytecode interpreter" i just dont know if i should just go back to an earlier form of ubuntu because these problems didnt start happening until i upgraded to the new ubuntu
I have an old machine running Ubuntu 9.10 and XP.t is a P4 and Nvidia FX5200 card.Yesterday all of a sudden the screen started flashing black, the same type as when you install new graphics drivers and the resolution is changing. Only here it keeps happening over and over, the mouse isn't usable fully, the icons and menus are distorted, and I basically can't do anything.
I ended up reinstalling 9.10 and everything was working fine until I installed EnvyNG to get my nVidia drivers. It required a restart, and once I logged in the same thing started happening. So I said screw this, and installed 8.04. Yet even in 8.04, once I used EnvyNG to install the drivers, the same thing happened.A few other detailsP works fine, although one time a similar thing happened on XP (not as bad), and was fixed with a reboot.- This PC runs through a KVM switch, but I connected it directly and the same thing happens.I've found no help via Google. Sounds like a possible hardware problem, but it seems to work fine in XP and only acts up in Ubuntu once I install drivers.
I installed Vista on my Acer 64-bit laptop first, then installed Ubuntu 9.10 in a dual-boot configuration. And when I start up my computer, Windows Vista is an option in the Grub menu. But when I use the grub loader to load Vista all I see is a black screen, with a flashing underscore character (it looks a lot like a terminal screen, waiting for input). The screen just stays like this, too - I timed it once, and 13 minutes later it was the same.
View 9 Replies View RelatedI have re-installed Fedora 3 times, each time, after a little while of use, when I am botting it up, it loads up, and before the login screen appears, the screen just goes black, and I end up with just a black screen and a white line in the top left corner flashing, thus resulting in me not being able to log in. The exact same has happened a number of time
Could it be something I had installed? Also, whilst using it, on the third install, a few times a message appeared telling me there was a kernel error, could this be linked to the problem? I was running Fedora in GNOME, but I had KDE installed too.
this is my first time doing a custom partition, I tried to do it with only the assistance of reading as I go, but I don't believe I found enough information last night. What I am trying to do, is put openSUSE on 200gb out of 500gb space on my external hard drive, as well as on 50gb space out of 110gb on my internal hard drive. The remaining 60gb space on my internal drive is going to be for microsoft windows. The remaining 300gb space on my external drive will be storage space. It seems like what I want to do is achievable
What I want is to have my main openSUSE on the external drive (primary partition I think?), with the GRUB loader so that when the external drive is not plugged in, my little brother can use windows on my internal hard drive. I tried this last night, and when installation had finished, I rebooted my computer and the screen was just blank black with the flashing white line as if waiting for me to type, although it would not allow me to type when I tried. It would be great if someone could tell me the order in which to partition, including the terms primary partition, extended partition, and logical partition, as needed.. I don't want to permanently muck up this machine.
1. Installed Ubuntu 11.04 32 bit for my 64 bit laptop to run alongside windows 7.
2. Installation worked, but had problems booting - it booted sometimes from the grub menu other times didn't
3. Found no solutions for problem so deleted grub and removed the ubuntu OS from disk management.
Since that time I've been attempting to install the long term support (version 10.04) for a while and nothing's happening. The button to "install" or "try without install" leads me to the ubuntu logo screen with the dots flashing under then a blank screen. The memory stick's light doesn't flash either hence it's not working. I've tried the 32 bit and 64 bit version, downloaded from multiple sources and converted the iso using multiple programs.
I then tried the 11.04 version again in 64 bit but that didn't work so I tried what I did in the beginning, the 32 bit version and it works. It feels a bit like after the first install my laptop only wants to install the 32bit 11.04 version and is a bit racist (can i say that?) to the other versions so completely rejects them. Why?
Is there any chance if I try to use a cd to boot that version and it may work from there?
And if I can't run 10.04 for some weird reason technical or w.e, can someone reccommend me another REALLY good version for a beginner which is easy to install and doesn't have too many problems.
I have an intel atom board (D410PT) and I can run livecds, liveusbs and even boot a grub4dos stick without issue, but install any 10.4 ubuntu variant and all I get is a black flashing cursor.It appears as if there is a grub2 incompatibility with this board, which is currently preventing me running a full ubuntu on it.I tried struggling on with a liveusb system with a rw partition but it's just not feasable for a home server as the lack of swap just bogs the machine down all the time.Grub-legacy no longer appears to be in the repos and neither does lilo (yeah, I really am that old-school that I could cope with lilo if necessary).What can be done about a system that doesn't like grub2? (syslinux is fine, but requires fat32, grub4dos works but doesn't like ext3/4, isolinux works but I don't want livecd, I want full install!)
View 3 Replies View RelatedI had switched over from Windows to Ubuntu and got rid of windows completely but still had the recovery partition and deleted it. I then tried to add that space to another partition, "Media." For whatever reason it deleted the "Media" partition so I used TestDisk to restore it. I did something wrong and when I rebooted my computer it would not boot so I used my LiveCD to check whats wrong and it had deleted all of my partitions and Ubuntu was nowhere to be found.
So I used TestDisk again to recover them, this time it was successful. The problem now however is that when I start my computer it does not boot into Ubuntu it just shows a black screen with the white underscore ("_") flashing in the corner. I'm not sure but I don't think it is booting into the correct partition, I think it would be trying to boot the first partition, /dev/sda1, rather than /dev/sda3. If this is the problem how could I fix it?
I had switched over from Windows to Ubuntu and got rid of windows completely but still had the recovery partition and deleted it. I then tried to add that space to another partition, "Media." For whatever reason it deleted the "Media" partition so I used TestDisk to restore it. I did something wrong and when I rebooted my computer it would not boot so I used my LiveCD to check whats wrong and it had deleted all of my partitions and Ubuntu was nowhere to be found. So I used TestDisk again to recover them, this time it was successful. when I start my computer it does not boot into Ubuntu it just shows a black screen with the white underscore ("_") flashing in the corner. I'm not sure but I don't think it is booting into the correct partition, I think it would be trying to boot the first partition, /dev/sda1, rather than /dev/sda3. If this is the problem how could I fix it? I got all the boot loader information, here it is:
[code]...
I've just downloaded and installed Ubuntu 11.04 (amd64) and every time I boot i get a flashing screen. I didn't have any problems at all with the LiveCD. The graphics card and my wireless adapter worked out of the box. But after the install it won't work. I can choose the OS in GRUB and then there's a purple screen. After that the screen starts flashing and I can hear the login sound.
I have tried using "nomodeset" but that didn't work either. There is no flashing, just a purple screen all the time. But it was possible to enter tty. I also tried booting the Recovery Mode but it just loads and then a pink flashing screen appears.
The graphics card is a XFX Radeon HD6870 1GB.
I just recently installed Ubuntu 10.04. Every time I boot it up the screen flashes, like going off, then on again. It won't stop doing that. I can see the screen for 1 sec then it goes black, and keeps repeating this.
View 5 Replies View Related