I have 2 computers running Ubuntu 10.04, One of them have a screen, keyboard and mouse connected (all wired)I want to control the other computer in some way, like a virtual PC in a window, via my network or a cable.
View 4 RepliesThe keyboard and mouse won't work while live booting Ubuntu from CD on a Acer Verition M264. I've tried PS/2 and USB mice. This problem starts from when Ubuntu loads, keyboard and mouse is fine until that point. There's also a complaint message once it's loaded up: The panel encountered a problem while loading "OAFIID:GNOME_FastUserSwitchApplet".
On a Dell Inspiron and a Acer Aspire X3200, Ubuntu 9.10 works just fine.
In the past few days Ive noticed a lot of updates. Yesterday morning several times I went to click on items on my desktop and I couldnt. I thought it was just my batteries getting weak. Yesterday afternoon it got so bad I couldnt click on anything for hours at a time. I could only power offIve been reading lots of forums and threadsd there are lots of possible problems to this but they all come down to xorg file and usb issues.
An example of one possible problem: When I have the system log open I can not move the app around, make it bigger or smaller, I can only scroll on the right pane and have to use the mouse keys to navigate the left pane. And if I want to shut the app down, sometimes I can use the ctl+F to close it but sometimes I cant.After I shut the app, any app that is, the mouse pointer turns to |< and I cant click on anything for 5 min to 5 hours. It was suggested to run sudo dpkg �reconfigure �phigh xserver-xorg but when I did I didnt see anything visually or in the terminal occur.
When I try to adjust the mouse and keyboard parameters, changes aren't applied. I adjust them to were I want to, click on accept, but then when I look on the settings again, they are set to default again. This must be some kind of bug. I already updated using the LXDE repository.
View 9 Replies View RelatedI have a Linux system running (Debian). It is working perfectly from a remote point of view. I can ssh in it, it has the imap running correctly, and a couple of kvm systems running (I can also ssh to them). Well, it works!
But when I go in front of the keyboard/mouse/screen there's nothing. No way to switch between the consoles with Ctrl+Alt+F# (X is not running on this system). The screen is desperately black. But the screen does not go to sleep mode, it still has its green led on! I guess it means that the graphics card still sends the H and V syncs correctly (VGA connection).
Is there a process that is blocking the display and prevents me from getting the control?
Note: Last time I used the console, it was in console 1. Ctrl+Alt+F1.
I have a Logitech Wave keyboard and mouse for my computer. I am not sure which version of Ubuntu I am running on but I think it is 6.10. When I boot up my computer I can go into the BIOS and earlier today it would even let me press escape to seee which operating systems I could boot. Now it no longer lets me see the operating system I have (which is why I cant say which version of Ubuntu I have). It takes me to the log in page and asks for the username and password but I cant type and I cant move the mouse. Earlier I could also use Alt+F1-F12, but this is no longer working either so it just sits at the login page and nothing works at all. The computer that is having this problem is very old it is a Proteva and when I opened up the actual computer the processor says:
At startup the computer says that the processor is a: AMD K-6
I know that the BIO's are to old for Ubuntu to run properly because at startup it also says that: "ACPI :
BIOS age (1998 ) fails cutoff (2000), acpi=force is required to enable ACPI" it also says that: "ACPI : unable to load the System Description Tables."
I have'nt used this computer for about a year or two, but the last time I used it it worked perfectly fine. I have been seeing questions on the forums similar to mine, but their problems are on other versions of Ubuntu and their mouse's are said to work fine. I cant try any of the solutions for the problems I have read about because I cant open the prompt that you get when you are at the log in screen and press F2. I have no idea what to do.
When I start ubuntu I can't use my mouse and keyboard. It works in a second when the log in screen appears but then it freeze. It works in bios, grub and safe mode. I use mx518 and ace kl 400.
View 9 Replies View RelatedI'm on a LG E500-VAP36P, with 3gb RAM, 250 Gb SATA HDD (Kubuntu Hardy kernel 2.6.27-9-generic), and my keyboard and my usb mouse don't work at the login screen. My touchpad works and my keyboard works in command-line session. This is my xorg.conf. I also attach a relevant part of my syslog.
Quote:
Section "InputDevice"
Identifier"Generic Keyboard"
Driver"kbd"
[code]....
As the title says i have this error on both my main computer and my laptop. For my main computer see this post, that is when it happened. viewtopic.php?f=30&t=65743
I run the updates on my laptop a while ago and decided to restart it to check if everything went okay. It seems not.
The only way i can get on the desktop, is to choose the recovery mode, su to user and startx.
This is a common error during booting on both computers. Starting the hotplug events dispatcher: udevderror binding control socket, seems udevd is already running
It seems a little strange, same error on both computers.
First I tried VNC. Easy install through Ubuntu GUI, but I could only see a still picture of the Ubuntu-desktop that wouldn't update. I could see on the Ubuntu monitor that the cursor was moving and the keyboard did work, but on my Windows computer, the screen didn't refresh. Then I read a bit on the forums and people seemed content with nomachine NX or freenx. After a bit of hazzle I finally managed to get a connection between my Windows and Ubuntu-machine. But the same thing happened here. I get to see a still picture of the Ubuntu desktop, mouse and keyboard working, but the screen doesn't refresh..!
View 1 Replies View RelatedI downloaded and burnt the Kubuntu 10.04 release to a CD. I tried to install it. First time, couldn't find the disks and eventually it froze. Ok, second try, when it's contacting the "time server" (or whatever) another freeze, but this time I notice everything is running fine and then get a nice little image with the current time (increasing seconds and all). Third attemp, clicked the "update this installer" and it went fine. "Yay!" I thought. Well, a few minutes in my beautiful 10.04 system and again, another freeze. Hit the power button and to my surprise a "Shutdown" dialog shows up with a countdown. After 30 seconds it logs out and mouse is working again. I log back in and come here to write this long post, and as I was writing the title "Random mouse/ke..." guess what? Yeah, it froze again. And the little bar that goes after the writing continued happily blinking. Hit the power button but this time mouse and keyboard were still frozen in the login screen.
Short version: mouse and keyboard randomly freeze while the rest of the system apparently work fine.
I have Laptop sony VPCEA22EN. I have installed ubuntu 10.04. it was working fine. Then i installed kubuntu-desktop. it was working fine. i tried to some of bugs using kubuntu update manager. i restarted the laptop.
after that im not able to logon on kubuntu. on kubuntu logon screen i'm unable to enter username n password. Keyboard and mouse is not detected but, usb mouse works.
i tried ctrl+alt+esc, this combination doesnt work while booting. i can't use this combination on log-on screen because keyboard is not detected.
I installed Ubuntu a couple of months ago using the Wubi installer.Today, I went to restart my PC, but soon after hitting 'Restart' the computer became unresponsive. I couldn't get any keyboard/mouse input to register on screen, so I did a force shut down by holding down the power button. When I turned the computer back on, I selected Ubuntu from the boot menu. The computer printed some messages that passed by relatively quickly so I'm not sure exactly what they said, but it was something along the lines of "NTFS3: wubibuilder failed to load", and then it went straight back to the boot menu. Tried again and again with no success, so I loaded my Windows 7 install to investigate from there. I found a link to Explore2fs on these forums, so I loaded it up, but it apparently can't locate my Ubuntu partition, or at least I don't see my files. I ran the Wubi installer again to see what it would say, and it tells me that a previous installation was detected, and gives me the option to uninstall. Does anyone have an idea of what went wrong,
View 5 Replies View RelatedI let the update manager run overnight on my netbook because it was taking a while. When I woke up, my netbook was off. It may have shut off during the updates. Now, when I turn it on, it gets to the login screen but the keyboard and mouse don't work. Is there anything I can do without a Live CD? Unfortunately I don't have a flash drive or anything with me.
View 1 Replies View RelatedAs my ubuntu 9.10 boots the mouse and the key board fail and screen is inactive. Previously working OK.
View 5 Replies View RelatedSo it's a beautiful day and I'll be happily using my computer when I realise that the screen is no longer showing that I'm typing or moving my mouse (or finger across a touch-pad). I can leave my computer in this frozen/crashed state for hours. My only recourse is to drain the battery or hold down the power button until the computer shuts down. The computer is a Dell Inspiron 6400 laptop/notebook. As my memory serves, it has an ATI graphics thingy. Radeon 1400, maybe. But I've had the computer for years and this behaviour has emerged only the past couple of months, with seemingly increasing frequency.
The OS is
# uname -a
Linux polaris 2.6.32-trunk-amd64 #1 SMP Sun Jan 10 22:40:40 UTC 2010 x86_64 GNU/Linux
(aka Squeeze?)
Sometimes this happens within minutes of turning the computer on and logging into Gnome. Sometimes this happens only hours after I've started using the computer (mainly just surfing the web). Sometimes it is preceded by a loud boop sound and the following if I have console open, sometimes not. So maybe that's unrelated. But that happened just now so I thought I'd throw it in.
One weird thing: Usually this happens within an hour of starting to use the computer, but one occasion I noticed I had not had the problem for several hours. On that occasion, the only thing I noticed I was doing that was also unusual: I had turned on and forgotten about a kvm virtual machine. After I shut down the vm, I had about only a minute before the freeze. I'm surprised now that it hasn't frozen since I started typing thing. Maybe I should always keep this forum open in a browser window.
I am trying to install fedora 10, 64 bit on computer with the following specification but the installation stops during installation (mouse , keyboard, screen freezes).
Motherboard Gigabyte GA-MA790GP-ud4h rev.1.0
processor AMD phenom ii 940
I have updated the bios to the latest version.
I am COMPLETELY new to Linux.I started a computer class recently and I started teaching myself PERL.My teacher had mentioned to me that it's far better for some reasons (he did not elaborate) to write code in a Unix system. So I got Ubuntu 10.10.I installed it along side my windows 7.After I setup my windows (had to reformat the disk) I decided to boot up into Ubuntu to set that up. I installed the necessary drivers that it required, and the updates. I was asked to restart the system so I did so.
It did not even shut down or restart my system.I waited patiently 15 minutes...30 minutes 1 hour... until I finally decided to hit the reset button on my PC. Then when I'd boot back in to Ubuntu afterwards, it would stay at the log in screen and my mouse wouldn't budge and nor is my keyboard recognized by Ubuntu.Im really frustrated and I've been searching for answers for the whooole day and I just can't seem to find something well explained. Im completely new to Ubuntu so I don't know where to enter any code in a cmd line or such.
1)Reformatted my harddrive to install windows 7 on it
2)Set up windows 7 and then booted into Ubuntu.
3) Set up Ubuntu and installed necessary drivers and updates
4) Reset the computer and waited for an hour for the reset to happen but nothing happened.
5) Manually reset my pc and booted into ubuntu
6) Stuck at log in screen with mouse and keyboard not functioning (unable to use ubuntu).
Got myself in a bit of a squeeze here. I was messing around with the Xorg install on my Fedora 12 system. I ended up reinstalling it. Now my mouse and keyboard work fine in single user mode / terminal. But if I try and boot to X they dont work at the login screen. HAL and udev are booting. Ive done a udevadm monitor test in single user mode and its seeing the devices connect and disconnect. Ive also tried both USB and PS2 devices. Same issue. Ive tried playing with xorg.conf and generating it with Xorg -configure :1 I dont know to use to fix it. After banging my head against the wall for 20+ hours I decided it was time to ask for help. m just Lynxing around the web at the moment =X
View 2 Replies View RelatedI know that in previous versions of OpenSuSE one could be in front of the screen/KBD/mouse get things started, and log into another session and get things started there and run some apps, and so on. Now with OpenSuSE 11.x I see no means in which to do so. Is there another way? Point being is that I want to run one application as one user session and another application in yet another user session. Either one I can get to by switching user accounts at one screen/kbd/mouse. Or through VNC. No need to run something like xen or VMWare and incur additional overhead. (It is next on my list to try though.
View 2 Replies View Relatedusing Kubuntu 10.04. When my computer was being updated sudden power failure forced my system to reboot and in the log in screen I can find that my keyboard and mouse is not working at all. I cannot enter into my system. I tried to enter ctrl+F1 but failed.
View 1 Replies View RelatedI just recently installed Slackware onto a virtual machine(I'm planning on buying a new disc drive and 1 TB HDD with-in the next couple of months and plan on Slackware being my primary OS[right now Mac OS X 10.6 is]), and everything went great.
I then went onto edit the /etc/inittab file in emacs and changed the run-level to 4. I don't know why it's decided that I'd want to boot into KDE when XFCE is installed and in the configuration I selected XFCE but it's not really relevant(I have a WM guide thing open in another tab and will probably be able to change it).
The problem is, as the vague title may suggest, is that it basically freezes when I'm at the log-in screen. The input field for the username is highlighted and blinking, and the cursor it self is visible in the centre of the screen, but it simply doesn't pick up on any input from my keyboard or mouse.
I tried booting up the install CD and logging in as root, mounting sda4(which is the root partition) and editing said file but sudo isn't installed(to my knowledge) on the install disc and when I do the command,
Code:
My ubuntu session will freeze and stop working. For example, the mouse and the keyboard will stop responding and the screen sometimes get divided into 4 smaller quadrants of the current screen.The only thing I can do after it freezes is reboot the machine.Would anyone know what is causing this?Also, I keep having to move my optical mouse from the usb slot into a ps/2 slot.And the same thing with my keyboard. I have 2 keyboards, so I can plug in the old ps/2 keyboard instead of the new usb keyboard. (the devices keep flipping)My machine is an AMD 3400 with an Epox mobo. Nothing like this has ever happened before, and I have been using ubuntu for more than 4 years without any problems.
View 9 Replies View RelatedMy screen is frequently freezing and even the keyboard or mouse doesn't work. I've been told to read the logs, But I don't know where thy are or what to look for?
View 3 Replies View RelatedI downloaded the Fedora 11 KDE livecd, installed it, and after the reboot when I get to that "firstboot" screen, I can't move the mouse, the keyboard doesn't work, I have to hold down the power button to turn off the computer.
View 11 Replies View RelatedIf I remain 'connected' (with the KVM) to the linux machine the gnome screen saver cuts in and the system remains 'as is' until 'woken up' with the mouse or keyboard. However, if I switch to another machine using the KVM, within a short time (maybe even minute or two) the linux machine goes dead. Now it has not crashed, as I can log in from a remote machine and do anything I need from a terminal, but the machine seems not to respond. I can't even use ctrl-alt-fn to switch to a console screen.
I initially tried entering telinit 3 from a remote machine but it made no apparent difference. However, if after telinit 3 I then killed the Xorg process and later issued a telinit 5 the X server restarted, but with a curious black 'notch' at the top of the screen. I am using an NVIDIA GeForce 7600 GS graphics card. I am now adding the backtrace from Xorg.0.log. It seems that when the KVM switches to another machine for more than a very short time the X server crashes.
[Code]....
It's two days now I'm in deep troubles after my last "yum update". The system boots as usual, the graphical login pops up the normal way but no input is handled by either the internal keyboard (the system is a laptop), the mouse pad, the external USB mouse and keyboard.
The hardware itself seems to be working as I can pop up the BIOS menus and even edit the GRUB booting line. But, after GRUB there's no possible input. I've tried to boot the system with the Fedora 11 DVD, rescue menu and then chroot. This in order to run a "yum update" in the hope that the problem was in some broken update. No chance: there's no update.
My questions are:
1. Is there a way to boot Fedora withou any graphical interface from GRUB (or anything else to skip the KDE)?
2. Is there a way to have the (cabled) network activated at boot *before* the graphical login?
3. What the he** is happening to my otherwise pefectly working laptop?
Volume up, volume down and mute keys on the keyboard don't control the volume any longer.They worked before. Hitting the keys brings up a progress bar widget with the volume level unchangeable, set at 0% (which is not accurate at all).It looks like the key mappings or key bindings are working, but there is a disconnect with actual functionality. The volume cannot be changed or muted anymore from the keyboard.
This worked just fine in KDE on Fedora 11 before upgrading KDE components yesterday with Yumex. I am now using KDE 4.3.2 I don't think that it's a coincidence that it stopped working after doing an update.
I updated the kernel and nVidia drivers too, but this problem exists when I went back and tested with the previous kernel, so I don't suspect the kernel upgrade. No info in Xorg.conf about the keyboard. Is there a setting that I am missing?
Sound works just fine. I can listen to whatever source I like. This is not a problem with the sound drivers as far as I can tell.I just want to be able to control the volume with the keys on my Logitech Illuminated Keyboard, model Y-UY95. Is anyone else experiencing this?I can adjust the volume with Kmix 3.5 or GNOME Volume Control V2.1
how can i control vlc via the keys above my keyboard(my english sucks and i have no idea what they are called, meta keys? multimedia keys? whatever)only MPlayer responds to them, not vlci opened vlc preferences window and in hotkeys page, i wanted to add the "PLAY KEY" to "PLAY/PAUSE" but it wouldn't even recognize the keys, nothing happens when i press them, but it would recognize something else ,like
View 2 Replies View RelatedThis is weird. When I start my computer, the cursor is frozen in place and the only way I have been able to get it moving is to do a hard restart. This has be a consistent problem for last few days. What's going on? How do I correct it?
View 2 Replies View Related