im trying to install the RTL8192CU_linux_v3.0.2164.20110715 drivers so my new wireless adapter works, but I have hit a wall when trying to insert the drivers after makeing them its telling me
"-VGN-NS325J:~/wifi/driver/8188$ insmod 8192cu.ko
insmod: error inserting '8192cu.ko': -1 Operation not permitted
I have recently installed Linux Mint 10 on my laptop. When I look at the Device Manager in Windows 7, it says I have an Atheros AR9285 Wireless Network Adapter. Right now, I am unable to connect to wifi with Linux. What drivers am I able to install, and how would I install them?
View 3 Replies View RelatedI have a old mac G4 and I just recently installed ubuntu 10.10 on it. It doesn't recognize my wireless adapter at all so I get no wireless on the computer. I've never used any linux distribution in my life so I don't have any idea how to install drivers for it.
View 1 Replies View RelatedI am trying to use my Wiimote with ubuntu. I have followed the guide on here:[URL].. But I get this error when I run modprobe:
FATAL: Error inserting uinput (/lib/modules/2.6.32-22-generic/kernel/drivers/input/misc/uinput.ko): Operation not permitted
I recently reformatted and dual partitioned to both Windows 7 as well as ubuntu 10.10. Loading works fine and Windows 7 is 100% operational. I cannot seem to get my wireless network adapter to be read by Ubuntus 'Windows Wireless Drivers' gui. Here are the steps that I have done THUS far, to make sure that we are all on the right path. Before I go any further, my wireless network adapter is an old school WUSB11 Linksys Wireless Network Adapter (running version 2.6).
1) Downloaded and installed "ndiswrapper" from ubuntu's main website. I downloaded the common, utils and ndisgtk files and installed them accordingly.
2) I extracted these three files to the desktop of Ubuntu and accessed the terminal page.
3) From terminal I typed "cd Desktop" to change the directory to the desktop.
4) Next, I typed in "Sudo dpkg -i ndiswrapper-common_1.54-2ubuntu1_all.deb
Sudo dpkg -i ndiswrapper-utils-1.9_1.54-2ubuntu1_i386.deb
Sudo dpkg -i ndisgtk_0.8.5-1_i386.deb"
5) This installed Windows Wireless Drivers gui successfully and I can access it.
6) I have downloaded the driver files for the adapter from the cisco website and searched them for the required files needed.
7) After extracting the .INF file from the "Drivers" directory named "NETUSB.SYS" (I wasn't sure if the other associated files within the same folder needed to be present together with NETUSB so I moved everything to the desktop) I typed in "sudo ndiswrapper -i NETUSB.inf". After accessing the Windows Wireless Drivers gui I have noticed that the 'netusb' driver is present yet under it, the system states "Hardware present: No". This leads me to believe that maybe I installed incorrectly or my "fireware?" is not present? I was reading through the installation guide posted on the ubuntu website that in addition to the .INF file we also need the BIN file(s)? and SYS file(s)?.. The folder with the drivers for my adapter contains a BIN file but it is not within the "Drivers" section of the folder.
9) Upon mousing over the network Icon naturally my hardware is still not present.
10) From what I gather after the system finds the hardware I am to write into the terminal
[Code]....
I have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
[code]...
I'm booting from disc on a compaq presario F700. Somehow, I messed everything up and now it's not reading that I have an OS. Which was previously vista. Now, when I boot from disc and try to install no partitions come up. I did open the blasted thing to clean it not too long but as far as I know, nothing dislodged. It is a laptop, btw. So, my kneejerk reaction is that the hard-drive got damaged or knocked loose. I also tried using kill-drive to erase it so I could start fresh, also no Hard drive detected. So, I'm going to try that. In the meantime I have another issue. When booting from disc I can't seem to get the drivers for my wireless adapter to install. I have them. Madwifi for AR5001X but I don't know where to put them via terminal.
View 9 Replies View RelatedI have a problem installing mi dlink dlw-g122 wireless usb adapter.I installed the drivers, in fact when executing
ndiswrapper -l
the output is
dr71wu driver present, hardware present
but when I try to execute
modprobe ndiswrapper
I have this error:
FATAL : Error inserting ndiswrapper (/lib/modules/2.6.12.9-386/kernel/drivers/net/ndiswrapper/ndiswrapper.ko): Operation not permetted
I am new to Linux and actually just finished my install about 30 minutes ago. Ubuntu 10.04 isn't recognizing my wireless adapter, so I need to install the drivers. I know where the drivers are, I just don't know how to install them on a Linux system.
Here is the driver page. I don't know how to download the .inf file (necessary?) but I have ndiswrapper, bcmwl5.sys, and sp33008.exe all in the downloads folder.
Apparently just double clicking the files does nothing, so what do I do now?
i was given a new DLink DWA-130 REV E draft N usb wireless adapter and was wondering if there are linux drivers for it?
View 2 Replies View Relatedi have just installed Fedora 10 and now my wireless adapter doesn't work and i think it's because i need to install drivers for it.. I have been using Ubuntu for the last few weeks and it worked fine in ubuntu probably because ubuntu comes with drivers for my adapter already installed.. Now, i'm kind of newbie so i don't know where to look and what to do.I did lspci and here is my adapter.. Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)
View 1 Replies View RelatedI can't seem to find drivers for my wireless adapter, TL-WN722NC, so that it can work on Linux (Ubuntu). I have already emailed the company, TP-Link, and they said that it does not support Linux yet.Is there a way that I might be able to get drivers for it somewhere else?
View 5 Replies View RelatedI really want to drop Windows, but wireless connectivity and frequent crashes are really discouraging me. I have a dual-boot W XP with Ubuntu 10.10. I do not have the computer on, so I'm writing this from my weak memory
USB Adapter - Netgear WNDA3100-100NAS = v2
The adapter works under W XP with no problems
The router, Linksys WRT54G sees the adapter in the dhcp table
lsusb lists the adapter.
I have copied the drivers from the install CD onto the desktop. I cannot figure out how to install or access those drivers for the installation. I tried to install the ndiswrapper from the software center, but the center shows it's available from the "main" source. I've looked in the package manager, but can't find it. When I go into terminal, and enter one of the suggested commands in the forums, it can't be located. I have a Belkin F5D8010 installed on this computer, and it works great under W XP. I want to try to get this installed, but until I can figure out installation of the ndiswrapper and how to access it, and get the drivers recognized, I'm at a standstill.
I have just installed Ubuntu 11.04 on an old machine to get a feel for it. No problems with the install, but I don't have a LAN connection lead spare so I'm trying to install my Belkin Wireless G USB Adapter (K75-F5D7050B which requires version 3 according to the Belkin site).
Unfortunately I can't find any Ubuntu software & driver versions on their site and I only have a windows installation disc.
I had a problem while installing linux 4.0, 5.0 & 5.2
My system configuration is as follows:
MSI 785 GM E65 MotherBoard
AMD Phenom IIx2 550 processor
RAM 2GB Kingston DDR3 1033GHz
HDD 1TB
While Installing linux 4.0 it shows a msg AHCI adapter drivers not available and system halts
While installing linux 5.0 it shows a msg
KERNEL PANNIC and system halts
While intalling linux 5.2 it halts
Just made the jump to Ubuntu, and until this install I considered myself very tech savvy. Now not so much! Built my new desktop, loaded Ubuntu 64 bit no problem. But I'm having a terrible time figuring out how to load the native driver for my realtek wireless adapter. I successfully un-tarred the file, and used the terminal to run the make command by using cd command to navigate to the file. It returned a wall of text, and in my mind looked to work. Next I go to run "./clean" in the same file location in the terminal and it returns:
"ERROR: Module r8192s_usb does not exist in /proc/modules
ERROR: Module ieee80211_rsl does not exist in /proc/modules
ERROR: Module ieee80211_crypt_ccmp does not exist in /proc/modules
ERROR: Module ieee80211_crypt_tkip does not exist in /proc/modules
ERROR: Module ieee80211_crypt_wep does not exist in /proc/modules
ERROR: Module ieee80211_crypt does not exist in /proc/modules
Not completely sure if this is an issue, I try moving to the next step of instructions issuing the command "insmod 8712u.ko" in the terminal same file location and get the error message
insmod: error inserting '8712u.ko': -1 Operation not permitted
I've tried running "sudo insmod 8712u.ko" from both that file directory, and from my home file directory. My guess is I'm missing a step or need to be typing these commands in a different file directory in the terminal.
I need to install the drivers for wireless.... rtl8187 11g USB adapter... I have a opensuse 11.2
View 7 Replies View RelatedI recently started having this odd behaviour while using and loading cpufrequtils on boot, I don't know if it is happening to someone else.During boot I'm getting( when /etc/init.d/cpufrequtils invokes /etc/init.d/loadcpufreq to load the proper module):
Loading cpufreq kernel modules...FATAL: Error inserting speedstep_centrino (/lib/modules/3.0.0-1-amd64/kernel/drivers/cpufreq/speedstep-centrino.ko): No such device
FATAL: Error inserting pcc_cpufreq (/lib/modules/3.0.0-1-amd64/kernel/drivers/cpufreq/pcc-cpufreq.ko): No such device
[code]....
I downloaded from the following link: [url]... etinst.iso and i have a working flash drive Debian installer. I would like to be able to integrate driver support for my wireless adapter or my gprs phone for internet access during install so that I wont have to be connected via ethernet.
View 2 Replies View RelatedI'm using LiveCD to test my laptop with FC 14. It booted from the LiveCD image last night, but my wireless didn't work. I need the madwifi wireless drivers for my built in Atheros adapter.
Can I download the latest and greatest madwifi drivers, compile them and use them while running from the LiveCD image?
I'm trying to use a D-Link DWA-130 wireless adapter with my desktop running Ubuntu 10.10. I've been scouring the forums (and google of course) and really can't understand why it's not working.The output from "iwconfig wlan0 is:Code:wlan0 no such deviceSo here is where I ask the stupid question: must you have a wireless card in the computer to use a wireless usb adapter? I built the computer myself you see and was looking to save some money.
View 9 Replies View RelatedI'm new to openSUSE and as a matter of fact, to linux too. I've got a Linksys WUSB600N wireless adapter which used to work fine with some live versions of linux that I was testing out before moving onto suse... Each time, upon booting using live CDs, I used to copy the driver I had downloaded from:
SpeedShare - Download rt2870-kernel-2.6.24-nemesis.tar.bz2
Then 'make' and get into the driver's os/linux directory to load the driver using 'insmod rt2870sta.ko' Now, upon doing a 'make' and 'make install', followed by the 'insmod rt2870sta.ko', I get the error saying:
insmod: error inserting 'rt2870sta.ko': -1 Invalid module format
I tried doing 'modprobe -rv rt2870sta' and didn't get any error messages. But while doing 'modprobe -v', this error shows up: insmod /lib/modules/2.6.27.7-9-default/kernel/drivers/net/wireless/rt2870sta.ko
FATAL: Error inserting rt2870sta (/lib/modules/2.6.27.7-9-default/kernel/drivers/net/wireless/rt2870sta.ko): Invalid module format
I have Ubuntu 9.10, which I just now installed on my Dell Dimension 3000. The computer has all of its USB ports working perfectly; tested in Windows. I plugged in my SMC USB Ez Connect g wireless adapter, and it isn't even recognized by the system. I used lsusb, and nothing except the USB keyboard and mouse shows up. Every time I boot or shut down, I get tons of errors saying that it's "unable to enumerate USB device on Port...," then the port number of whichever port I plug the wireless adapter into. I've tried using ndiswrapper, and have completely installed the Windows drivers using that (which were the same ones that worked perfectly in Windows XP Pro). I've tried looking into compat-wireless and Linux Wireless, and have successfully installed the zd1211rw drivers and everything. The drivers install completely and work, there is just no hardware present, or so it says. This is what the terminal says when I type dmesg, and also part of what shows up on booting and shutdown:
[code]....
I hope I've given enough information. Oh, and I downloaded Ubuntu a few days ago from their website, burned to a CD-R, installed, and downloaded all updates that it asked me to. Other than that and the ndiswrapper and driver installation, I've done nothing on the system.
recently I bought a an Asus n13 usb wireless adaptor. It came with the linux drivers installed and some brief instructions, but make failed and I don't know why. I am running ubuntu 10.10 (64bit) and gcc version 4.4.5.The error messages from make
Code:
[angus@angus-laptop 2009_0811_RT3070_Linux_STA_v2.1.1.0_USB-N13]$ sudo make
make -C tools
make[1]: Entering directory `/home/angus/bin/drivers/2009_0811_RT3070_Linux_STA_v2.1.1.0_USB-N13/tools'
gcc -g bin2h.c -o bin2h
[code].....
am running Ubuntu 10.04 ... only because for some reason that is the only version that will load onto my IBM pentium 4 desktop! I installed ndisgtk, ndiswrapper-common and ndiswrapper-utils-1.9 by using the Synaptic Package Manager GUI. Using Windows Wireless Drivers GUI, I installed the driver rt 2870 off the Belkin CD that came with the product. Status is "Hardware present: Yes"
here is the status of my lsusb and iwconfig:
finn@finn-desktop:~$ lsusb
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 045e:008c Microsoft Corp. Wireless Intellimouse Explorer 2.0
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 006: ID 050d:935a Belkin Components
It seems I have ndiswrapper working (I think!) ... but i still can't connect my wireless.
I am trying to install a Star Tech PEX300WN2X3 wireless card but I'm completely lost. The installation Cd has 2 tar. files with the linux drivers but I'm just clueless as to what to do with them.
View 9 Replies View RelatedI have a desktop and I just installed ubuntu 10.04 as a dual boot with windows 7. My desktop has a wireless ZEW1642S card. I don't have access to a wired internet connection, but I can use the wireless on my windows 7 fine. It seems like there is no driver for it to work on ubuntu, and since I don't have an internet connection while in ubuntu, it seems I can't update it of course because I need internet to update. My wireless network does NOT have a password if that even means anything for this. I have the exe installer for the driver for it but I don't know how I'm supposed to get the INF file or whatever.
View 9 Replies View RelatedI have a problem installing mi dlink dlw-g122 wireless usb adapter.I installed the drivers, in fact when executing
ndiswrapper -l
the output is
dr71wu driver present, hardware present
but when I try to execute
modprobe ndiswrapper
I have this error:
FATAL : Error inserting ndiswrapper (/lib/modules/2.6.12.9-386/kernel/drivers/net/ndiswrapper/ndiswrapper.ko): Operation not permetted
Ok, so I am needing some drivers and I've been googling like hell to find em, however, I can never seem to find any. My adapter model is F6D6050v1.
PS: when I try sudo ndisgtk it comes up with command not found.
finding and installing a driver for the Linksys WUSB300N wireless adapter.
View 1 Replies View Related