OpenSUSE Hardware :: Install The Drivers For Wireless ... Rtl8187 11g USB Adapter
Feb 8, 2010I need to install the drivers for wireless.... rtl8187 11g USB adapter... I have a opensuse 11.2
View 7 Replies
ADVERTISEMENT
OpenSUSE Wireless :: Adapter RTL8187 Initialization Failed
Sep 8, 2010I have a RTL81817 chipset in my USB wireless network adapter. I installed the driver, but it still didn't work.
In Yast->Hardware->Hardware Information->USB the following details are displayed:
RTL8187B_WLAN_Adapter
-Bus: USB
-Class(spec): unclassified device
-Class: unclassified device
-Device Identifier: 229767
[Code].....
Ubuntu Networking :: 'Wireless Is Disabled' Using RealTek RTL8187 Wireless USB Adapter
May 25, 2010I have just completed installing Ubuntu 10.04 LTS. When I click on teh network manager it shows:
Wired Network
disconnected
Wireless Network (Intel PRO/Wireless 2200BG [Calexico2])
wireless is disabled
Wireless Network (Manufacturer RealTek RTL8187 RTL8187 Wireless)
[Code]....
I want to be able to connect through the RealTek wireless adapted.
Ubuntu Networking :: AWUS036H - RTL8187 Wireless Adapter Slow
May 29, 2010This is wireless adapter: [URL]... USB/Detail.bok I have 2 AWUS036H Wireless USB adapter that uses the RTL8187 Chipset connected to a USB 2.0 Port. It is very slow when I try to go to websites or download anything using Ubuntu 10.04 Lucid Lynx. The max speed I can get out of it is 135 Kilobytes per second when downloading anything. But when I am on Windows I can max out 2.6 Megabytes per second. I have been trying to find a solution but have found none. When I look at the light on the wireless adapter and compare it to what it looks like on both Ubuntu and Windows. It seems that the wireless adapter light is dimmer on Ubuntu. So I was thinking it was txpower set very low. I changed it but no success on changing speed. I am using WPA2-PSK which obviously uses AES. I have also tested it while it is in WEP and when it is Open with no change in speed. Speed results Ubuntu 10.04: Speed results Windows 7: I changed the settings to Megabytes on those speed results.
[code]...
Ubuntu Networking :: Slow Wireless With USB Adapter RTL8187 - Make It Up?
Aug 29, 2010Ditching Windows for the last time but this seems to be a issue wireless seems fine for a bit but then the connection slows to around 20kbps or worse. Any ideas what it could be? Using 10.04.1 it says it has a 48mb connection and i have 4 bars.
Bus 001 Device 005: ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter code...
Ubuntu Networking :: Connection Stop Working With RTL8187 Wireless Adapter After Few Minutes
Feb 4, 2011I buy a new usb network adapter (Through DX), when I try to use it in ubuntu or BackTrack4 Final it is working, and connecting networks even with WPA encryption. But after few minuts it stops working totally. It is showing that I'm connected to the AP but web sites do not respond.
Notes:
- I have another PCI Wireless adapter which works fine.
- The problematic adapter works great on windows.
- A driver CD came with it, including a linux driver which I wasn't succesfully installed.
- A BackTrack3 Disc came with it, claming by the instructions that the adapter will work with it. I didn't try it because i have backtrack 4 final.
It took me dozens of surfing the web hours, and too many restarts,
Ubuntu Networking :: Plug In Realtek RTL8187 Wireless Adapter Disconnects Automatically Randomly
Feb 3, 2010When I first turn it on to the desktop, it automatically connects and disconnects automatically 5 times then sometimes it would disconnect a few times randomly out of the blue.
This ia an external single usb wireless adapter you plug in the usb port on my desktop tower.
Ubuntu :: Can't Get Drivers For Wireless Adapter To Install
Feb 24, 2010I'm booting from disc on a compaq presario F700. Somehow, I messed everything up and now it's not reading that I have an OS. Which was previously vista. Now, when I boot from disc and try to install no partitions come up. I did open the blasted thing to clean it not too long but as far as I know, nothing dislodged. It is a laptop, btw. So, my kneejerk reaction is that the hard-drive got damaged or knocked loose. I also tried using kill-drive to erase it so I could start fresh, also no Hard drive detected. So, I'm going to try that. In the meantime I have another issue. When booting from disc I can't seem to get the drivers for my wireless adapter to install. I have them. Madwifi for AR5001X but I don't know where to put them via terminal.
View 9 Replies View RelatedUbuntu Networking :: How To Install / Access Wireless USB Adapter Drivers
Mar 5, 2011I really want to drop Windows, but wireless connectivity and frequent crashes are really discouraging me. I have a dual-boot W XP with Ubuntu 10.10. I do not have the computer on, so I'm writing this from my weak memory
USB Adapter - Netgear WNDA3100-100NAS = v2
The adapter works under W XP with no problems
The router, Linksys WRT54G sees the adapter in the dhcp table
lsusb lists the adapter.
I have copied the drivers from the install CD onto the desktop. I cannot figure out how to install or access those drivers for the installation. I tried to install the ndiswrapper from the software center, but the center shows it's available from the "main" source. I've looked in the package manager, but can't find it. When I go into terminal, and enter one of the suggested commands in the forums, it can't be located. I have a Belkin F5D8010 installed on this computer, and it works great under W XP. I want to try to get this installed, but until I can figure out installation of the ndiswrapper and how to access it, and get the drivers recognized, I'm at a standstill.
Debian Installation :: Integrate Wireless Adapter Drivers To Install Media?
May 13, 2010I downloaded from the following link: [url]... etinst.iso and i have a working flash drive Debian installer. I would like to be able to integrate driver support for my wireless adapter or my gprs phone for internet access during install so that I wont have to be connected via ethernet.
View 2 Replies View RelatedUbuntu Networking :: Get Wireless Network Adapter To Be Read By 'Windows Wireless Drivers'
Nov 24, 2010I recently reformatted and dual partitioned to both Windows 7 as well as ubuntu 10.10. Loading works fine and Windows 7 is 100% operational. I cannot seem to get my wireless network adapter to be read by Ubuntus 'Windows Wireless Drivers' gui. Here are the steps that I have done THUS far, to make sure that we are all on the right path. Before I go any further, my wireless network adapter is an old school WUSB11 Linksys Wireless Network Adapter (running version 2.6).
1) Downloaded and installed "ndiswrapper" from ubuntu's main website. I downloaded the common, utils and ndisgtk files and installed them accordingly.
2) I extracted these three files to the desktop of Ubuntu and accessed the terminal page.
3) From terminal I typed "cd Desktop" to change the directory to the desktop.
4) Next, I typed in "Sudo dpkg -i ndiswrapper-common_1.54-2ubuntu1_all.deb
Sudo dpkg -i ndiswrapper-utils-1.9_1.54-2ubuntu1_i386.deb
Sudo dpkg -i ndisgtk_0.8.5-1_i386.deb"
5) This installed Windows Wireless Drivers gui successfully and I can access it.
6) I have downloaded the driver files for the adapter from the cisco website and searched them for the required files needed.
7) After extracting the .INF file from the "Drivers" directory named "NETUSB.SYS" (I wasn't sure if the other associated files within the same folder needed to be present together with NETUSB so I moved everything to the desktop) I typed in "sudo ndiswrapper -i NETUSB.inf". After accessing the Windows Wireless Drivers gui I have noticed that the 'netusb' driver is present yet under it, the system states "Hardware present: No". This leads me to believe that maybe I installed incorrectly or my "fireware?" is not present? I was reading through the installation guide posted on the ubuntu website that in addition to the .INF file we also need the BIN file(s)? and SYS file(s)?.. The folder with the drivers for my adapter contains a BIN file but it is not within the "Drivers" section of the folder.
9) Upon mousing over the network Icon naturally my hardware is still not present.
10) From what I gather after the system finds the hardware I am to write into the terminal
[Code]....
Software :: Installing Wireless Drivers With Atheros AR9285 Wireless Network Adapter?
Jan 12, 2011I have recently installed Linux Mint 10 on my laptop. When I look at the Device Manager in Windows 7, it says I have an Atheros AR9285 Wireless Network Adapter. Right now, I am unable to connect to wifi with Linux. What drivers am I able to install, and how would I install them?
View 3 Replies View RelatedOpenSUSE Wireless :: Install Linksys WUSB600n Dual-band USB Wireless-N Adapter Onto A Desktop System With 11.1 Installed
Apr 27, 2009I'm trying to install a Linksys WUSB600n dual-band USB wireless-N adapter onto a desktop system with opensuse 11.1 installed; this system will be migrating to a back porch with no cabling access, hence the wireless solution. Everything works fine under Windows XP, but on Linux, not so much. Hardware info is as follows; there is no "Wireless LAN" entry, but there is a USB entry:
99: udi = '/org/freedesktop/Hal/devices/usb_device_1737_71_noserial'
info.subsystem = 'usb_device'
usb_device.vendor = 'Linksys'
usb_device.bus_number = 1 (0x1)
linux.subsystem = 'usb'
usb_device.product = 'Dual-Band Wireless-N USB Network Adapter'
info.product = 'Dual-Band Wireless-N USB Network Adapter'
[Code]........
Ubuntu Networking :: Belkin Enhanced Wireless USB Network Adapter - Windows Wireless Drivers App Doesn't Work
Feb 3, 2010I have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
[code]...
Fedora :: Finding Drivers For Wireless Adapter?
Mar 2, 2009i have just installed Fedora 10 and now my wireless adapter doesn't work and i think it's because i need to install drivers for it.. I have been using Ubuntu for the last few weeks and it worked fine in ubuntu probably because ubuntu comes with drivers for my adapter already installed.. Now, i'm kind of newbie so i don't know where to look and what to do.I did lspci and here is my adapter.. Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)
View 1 Replies View RelatedSoftware :: Can't Seem To Find Drivers For Wireless Adapter
Mar 18, 2010I can't seem to find drivers for my wireless adapter, TL-WN722NC, so that it can work on Linux (Ubuntu). I have already emailed the company, TP-Link, and they said that it does not support Linux yet.Is there a way that I might be able to get drivers for it somewhere else?
View 5 Replies View RelatedOpenSUSE Wireless :: Install USB Adapter From Trendnet TEW 424UB?
May 2, 2010Installation of my wireless USB trendnet adapter
View 2 Replies View RelatedUbuntu Installation :: Drivers - 10.04 - Isn't Recognizing My Wireless Adapter
May 2, 2010I am new to Linux and actually just finished my install about 30 minutes ago. Ubuntu 10.04 isn't recognizing my wireless adapter, so I need to install the drivers. I know where the drivers are, I just don't know how to install them on a Linux system.
Here is the driver page. I don't know how to download the .inf file (necessary?) but I have ndiswrapper, bcmwl5.sys, and sp33008.exe all in the downloads folder.
Apparently just double clicking the files does nothing, so what do I do now?
Ubuntu :: Drivers For DLink DWA-130 REV E Draft N Usb Wireless Adapter?
Jul 14, 2010i was given a new DLink DWA-130 REV E draft N usb wireless adapter and was wondering if there are linux drivers for it?
View 2 Replies View RelatedUbuntu / Apple :: Downloading And Installing Wireless Adapter Drivers?
Oct 21, 2010I have a old mac G4 and I just recently installed ubuntu 10.10 on it. It doesn't recognize my wireless adapter at all so I get no wireless on the computer. I've never used any linux distribution in my life so I don't have any idea how to install drivers for it.
View 1 Replies View RelatedUbuntu Networking :: Belkin Wireless G USB Adapter Software/Drivers For 11.04?
Jun 17, 2011I have just installed Ubuntu 11.04 on an old machine to get a feel for it. No problems with the install, but I don't have a LAN connection lead spare so I'm trying to install my Belkin Wireless G USB Adapter (K75-F5D7050B which requires version 3 according to the Belkin site).
Unfortunately I can't find any Ubuntu software & driver versions on their site and I only have a windows installation disc.
OpenSUSE Wireless :: Install Realtek Semiconductor Co., Ltd RTL8188CE 802.11b/g/n WiFi Adapter?
Mar 26, 2011This is the wireless card that came with my Toshiba Satellite L655D-S5093. First check to see if you have the correct driver. Run
[Code]....
Fedora Installation :: Madwifi Wireless Drivers For Built In Atheros Adapter?
Nov 19, 2010I'm using LiveCD to test my laptop with FC 14. It booted from the LiveCD image last night, but my wireless didn't work. I need the madwifi wireless drivers for my built in Atheros adapter.
Can I download the latest and greatest madwifi drivers, compile them and use them while running from the LiveCD image?
Ubuntu Networking :: Loading Native Drivers For Realtek Wireless Adapter?
Feb 12, 2011Just made the jump to Ubuntu, and until this install I considered myself very tech savvy. Now not so much! Built my new desktop, loaded Ubuntu 64 bit no problem. But I'm having a terrible time figuring out how to load the native driver for my realtek wireless adapter. I successfully un-tarred the file, and used the terminal to run the make command by using cd command to navigate to the file. It returned a wall of text, and in my mind looked to work. Next I go to run "./clean" in the same file location in the terminal and it returns:
"ERROR: Module r8192s_usb does not exist in /proc/modules
ERROR: Module ieee80211_rsl does not exist in /proc/modules
ERROR: Module ieee80211_crypt_ccmp does not exist in /proc/modules
ERROR: Module ieee80211_crypt_tkip does not exist in /proc/modules
ERROR: Module ieee80211_crypt_wep does not exist in /proc/modules
ERROR: Module ieee80211_crypt does not exist in /proc/modules
Not completely sure if this is an issue, I try moving to the next step of instructions issuing the command "insmod 8712u.ko" in the terminal same file location and get the error message
insmod: error inserting '8712u.ko': -1 Operation not permitted
I've tried running "sudo insmod 8712u.ko" from both that file directory, and from my home file directory. My guess is I'm missing a step or need to be typing these commands in a different file directory in the terminal.
Ubuntu :: Installing Drivers For Wireless Usb Adapter / Error Inserting '8192cu.ko'?
Sep 1, 2011im trying to install the RTL8192CU_linux_v3.0.2164.20110715 drivers so my new wireless adapter works, but I have hit a wall when trying to insert the drivers after makeing them its telling me
"-VGN-NS325J:~/wifi/driver/8188$ insmod 8192cu.ko
insmod: error inserting '8192cu.ko': -1 Operation not permitted
OpenSUSE Wireless :: Install Wireless Drivers On 11.3?
Aug 12, 2010I just upgraded from 11.2 and it seems 11.3 dosent detect my wireless adapter or ask for a driver update. I have a acer laptop but am not sure what brand the adapter is..
View 1 Replies View RelatedOpenSUSE Install :: WPN111 Wireless Adapter And NETGEAR - Make The Module Load Automatically On Boot ?
Feb 14, 2011Above adapter can be installed on v10.2 and 11.3 using ndiswrapper:-
1. Copy the 3 driver files from Windows:- like netwpn111.inf, WPN111.sys & ar5523.bin.
(Be carfeul about the exact names, because they have changed over time).
2. sudo ndiswrapper -i netwpn111.inf
3. sudo ndiswrapper -m
4. sudo modprobe ndiswrapper (the adapter should light up at this point and networks will be detected shortly after - see network manager). (Be careful of paths here - e.g. I had to use /sbin/modprobe - so 'whereis' may be necessary to find these commands).
2nd When I reboot, I need to run the modprobe command again. How do I make the module load automatically on boot? Also (and this is minor), can I bypass the KWallet, keyring thing? it seems silly to enter a password for the keyring and then click another password dialog, when I can just as easily enter the password for the network itself.
OpenSUSE Install :: Install Some Wireless Drivers - Don't Have A /lib/modules/<kernel>/build Directory
Dec 14, 2009I'm trying to install some wireless drivers, but apparently I don't have a /lib/modules/<kernel>/build directory, which is causing the Makefile to throw an error. Is there a specific place I should point the Makefile at?
View 9 Replies View RelatedOpenSUSE Wireless :: Can't Install Drivers For Netgear WG311v3
Feb 12, 2011I'm having trouble installing my wireless card drivers. I've read a lot on this using Ndiswrapper to install my drivers but when I go to install I get this.
linux-8h6g:/wg311 # ndiswrapper -i wg311v3.inf couldn't open wg311v3.inf: No such file or directory at /usr/sbin/ndiswrapper line 219.
I'm giving the right path to the inf file tried moving to other folders and still nothing.
Slackware :: Alfa AWUS036h Rtl8187 Adapter Not Working On Slackware 13.1
Oct 13, 2010I recently bought the Alfa AWUS036h which uses the Realtek rtl8187 chipset. I am able to load the module and connect to any network, but its almost as soon as I try to load a page the connection drops. It never stays connected for more than 30 seconds. My other computers using the same adapter in the same spot work fine, unfortunately there not running slackware. I've tried compiling the newest stable kernel and checked the rd.inet1.conf settings.
View 6 Replies View Related