I am trying to install a Star Tech PEX300WN2X3 wireless card but I'm completely lost. The installation Cd has 2 tar. files with the linux drivers but I'm just clueless as to what to do with them.
View 9 Replies
I have recently installed Linux Mint 10 on my laptop. When I look at the Device Manager in Windows 7, it says I have an Atheros AR9285 Wireless Network Adapter. Right now, I am unable to connect to wifi with Linux. What drivers am I able to install, and how would I install them?
View 3 Replies View RelatedI'm trying to use a D-Link DWA-130 wireless adapter with my desktop running Ubuntu 10.10. I've been scouring the forums (and google of course) and really can't understand why it's not working.The output from "iwconfig wlan0 is:Code:wlan0 no such deviceSo here is where I ask the stupid question: must you have a wireless card in the computer to use a wireless usb adapter? I built the computer myself you see and was looking to save some money.
View 9 Replies View RelatedI recently reformatted and dual partitioned to both Windows 7 as well as ubuntu 10.10. Loading works fine and Windows 7 is 100% operational. I cannot seem to get my wireless network adapter to be read by Ubuntus 'Windows Wireless Drivers' gui. Here are the steps that I have done THUS far, to make sure that we are all on the right path. Before I go any further, my wireless network adapter is an old school WUSB11 Linksys Wireless Network Adapter (running version 2.6).
1) Downloaded and installed "ndiswrapper" from ubuntu's main website. I downloaded the common, utils and ndisgtk files and installed them accordingly.
2) I extracted these three files to the desktop of Ubuntu and accessed the terminal page.
3) From terminal I typed "cd Desktop" to change the directory to the desktop.
4) Next, I typed in "Sudo dpkg -i ndiswrapper-common_1.54-2ubuntu1_all.deb
Sudo dpkg -i ndiswrapper-utils-1.9_1.54-2ubuntu1_i386.deb
Sudo dpkg -i ndisgtk_0.8.5-1_i386.deb"
5) This installed Windows Wireless Drivers gui successfully and I can access it.
6) I have downloaded the driver files for the adapter from the cisco website and searched them for the required files needed.
7) After extracting the .INF file from the "Drivers" directory named "NETUSB.SYS" (I wasn't sure if the other associated files within the same folder needed to be present together with NETUSB so I moved everything to the desktop) I typed in "sudo ndiswrapper -i NETUSB.inf". After accessing the Windows Wireless Drivers gui I have noticed that the 'netusb' driver is present yet under it, the system states "Hardware present: No". This leads me to believe that maybe I installed incorrectly or my "fireware?" is not present? I was reading through the installation guide posted on the ubuntu website that in addition to the .INF file we also need the BIN file(s)? and SYS file(s)?.. The folder with the drivers for my adapter contains a BIN file but it is not within the "Drivers" section of the folder.
9) Upon mousing over the network Icon naturally my hardware is still not present.
10) From what I gather after the system finds the hardware I am to write into the terminal
[Code]....
I am severe wireless problems with Ubuntu 10.04 on my laptop.(Spec below)
I have just performed the first clean install since new. Installed a new Hard Drive as well. The machine and wifi was fine under Ubuntu 9.04.
It is booting much faster now but the wifi keeps dropping off.
Spec:
Machine - Acer Aspire 4310
Wireless card - *-network
description: Wireless interface
product: AR5001 Wireless Network Adapter
vendor: Atheros Communications Inc.
[Code].....
I have Ubuntu 9.10, which I just now installed on my Dell Dimension 3000. The computer has all of its USB ports working perfectly; tested in Windows. I plugged in my SMC USB Ez Connect g wireless adapter, and it isn't even recognized by the system. I used lsusb, and nothing except the USB keyboard and mouse shows up. Every time I boot or shut down, I get tons of errors saying that it's "unable to enumerate USB device on Port...," then the port number of whichever port I plug the wireless adapter into. I've tried using ndiswrapper, and have completely installed the Windows drivers using that (which were the same ones that worked perfectly in Windows XP Pro). I've tried looking into compat-wireless and Linux Wireless, and have successfully installed the zd1211rw drivers and everything. The drivers install completely and work, there is just no hardware present, or so it says. This is what the terminal says when I type dmesg, and also part of what shows up on booting and shutdown:
[code]....
I hope I've given enough information. Oh, and I downloaded Ubuntu a few days ago from their website, burned to a CD-R, installed, and downloaded all updates that it asked me to. Other than that and the ndiswrapper and driver installation, I've done nothing on the system.
recently I bought a an Asus n13 usb wireless adaptor. It came with the linux drivers installed and some brief instructions, but make failed and I don't know why. I am running ubuntu 10.10 (64bit) and gcc version 4.4.5.The error messages from make
Code:
[angus@angus-laptop 2009_0811_RT3070_Linux_STA_v2.1.1.0_USB-N13]$ sudo make
make -C tools
make[1]: Entering directory `/home/angus/bin/drivers/2009_0811_RT3070_Linux_STA_v2.1.1.0_USB-N13/tools'
gcc -g bin2h.c -o bin2h
[code].....
I have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
[code]...
On my desktop, I have Windows 7. I just also installed ubuntu on a partition in order to dual-boot. The installation worked fine, however now I cannot use the internet on either os. I have a Realtek PCIe GBE Family Controller On Windows 7, the LAN flashes from "Enabled" -> "Identifying" -> "Network cable unplugged". It does this on a seemingly continuous loop. When I disable it, it will not let me enable it. It says it can't start. Also, I uninstalled and re-installed the driver for my ethernet with no change.On Ubuntu, when I try to do "ifconfig eth0 up" and "dhclient eth0" I get the message "No DHCPOFFERS received. No working leases in persistent database - sleeping."
View 5 Replies View Relatedam running Ubuntu 10.04 ... only because for some reason that is the only version that will load onto my IBM pentium 4 desktop! I installed ndisgtk, ndiswrapper-common and ndiswrapper-utils-1.9 by using the Synaptic Package Manager GUI. Using Windows Wireless Drivers GUI, I installed the driver rt 2870 off the Belkin CD that came with the product. Status is "Hardware present: Yes"
here is the status of my lsusb and iwconfig:
finn@finn-desktop:~$ lsusb
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 045e:008c Microsoft Corp. Wireless Intellimouse Explorer 2.0
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 006: ID 050d:935a Belkin Components
It seems I have ndiswrapper working (I think!) ... but i still can't connect my wireless.
I have a desktop and I just installed ubuntu 10.04 as a dual boot with windows 7. My desktop has a wireless ZEW1642S card. I don't have access to a wired internet connection, but I can use the wireless on my windows 7 fine. It seems like there is no driver for it to work on ubuntu, and since I don't have an internet connection while in ubuntu, it seems I can't update it of course because I need internet to update. My wireless network does NOT have a password if that even means anything for this. I have the exe installer for the driver for it but I don't know how I'm supposed to get the INF file or whatever.
View 9 Replies View RelatedI have an HP Pavilion dv5 1002nr laptop running Vista. I decided to install Ubuntu using the windows installer, which did install well, but I decided that it wasn't for me, and uninstalled it. Now, my wireless adapter which is a Atheros AR5007 802.11b/g can see the network, find networks by itself, and is supposedly installed correctly according to Vista, cannot connect to any networks at all despite being able to see them and acquire a signal strength. Up until installing Ubuntu I have never had an issue like this. Other devices have no trouble connecting to this network, and I am currently using a Netgear wireless usb dongle to connect to the very network that my Atheros can not connect to.
View 2 Replies View RelatedHow do i get my xbox 360 wireless adapter to work on ubuntu?
View 2 Replies View RelatedI just got a new AZiO AWU212N 802.11n wireless usb adapter (linked below). One of the product reviews said that it works with Ubuntu if you upgrade to the .34 kernel so I thought it would be a good buy. I updated my kernel and Ubuntu detects that there is a wireless adapter, but doesn't detect any networks. My old wireless-g adapter can connect just fine, so I don't know what the problem is.
http://www.newegg.com/Product/Produc...82E16833340018
i just installed Ubuntu 11.04 64bit on my desktop. i have a TP Link TL-WN321G (Ver 4.0) wireless usb adapter to connect to my wireless network (i used to use it with Windows XP).As expected (i'd read up a bit before installing Ubuntu), the adapter was autodetected - i could see my wireless network listed in the networks list dropdown, and lsusb showed it too.lsusb identifies "Bus 002 Device 002: ID 148f:2070 Ralink Technology, Corp. RT2070 Wireless Adapter"But i cannot connect to the network. When i select my network, it keeps trying to connect, but never succeeds in connecting.
i tried going through the forums for possible solutions, but most of them deal with how to get it working when the adapter is not detected, or when networks are not shown. Or they are for older Ubuntu versions.i use the same wireless network on my laptop (Ubuntu 9.04), and it has a WPA & WPA2 Personal security, with a password, which i've configured in the desktop as well.
To setup a Compact Wireless-G USB Network Adapter (WUSB54GC) on Fedora 12 ?
View 1 Replies View RelatedMay I put a USB 54Mbps Wireless Network Card Adapter into Ubuntu Studio- 64 bit, does the 64 bit Ubuntu Studio (9.10) support this usb wireless network card adapter? how to let it work in Ubuntu Studio 9.10
View 8 Replies View RelatedI recently upgraded from Ubuntu 9.10 to 10.04 (both 64-bit) and my USB WiFi adapter which previously worked fine stopped working. The adapter is a Hama USB stick based on the Ralink rt73 chipset. I've tried using the Ralink drivers that come with 10.04 (both rt2800usb and rt73usb) but neither work. When I use rt2800usb, the adapter is recognized as interface wlan0, however I can't see any wireless networks. When I use rt73usb (and blacklist rt2800usb to avoid conflicts) I no longer have a wlan0 interface and there is no wireless adapter shown in the network manager. I've pasted in the results of lsmod, lsusb, and ifconfig -a (with MAC addresses removed) below.
[Code]....
I have a Toshiba MX35 laptop it's a little old but does the job. I'm have a problem getting the wireless to work. I can boot a live CD either Ubuntu 10.10 or Fedora 14 and they will see the wireless card. The card is Atheros Communications Inc. Atheros AR5001X+ Wireless Network Adapter (rev 01).
I have Ubuntu 9.10 installed and that is the OS that is having the problem seeing the wireless. The computer will not handle Ubuntu 10.10 (at least it won't handle the desktop effects under Ubuntu 10.10) but handles them just fine under 9.10 and that's why I have 9.10 installed. I really need the Wifi to work because I'm going to travel in a few days.
I recently installed the latest and greatest Lubuntu 64 bit, because I like lxde and I am planning a system migration. (I am really starting to not like windows 7.) I have some linux experience. I wouldn't say I am awesome at it, but I am comfortable trying anything.
Example: I have used CENTOS 5.6 to make a linux machine server as a glorified router, with asterisks, SIP, SSH server, x windows, GNome, VNC, and a user authentication system. and get this I walked somebody through setting this up over the phone. I reopened the root account (I honestly got tired of typing sudo every other command is the only reason why I opened it.) I plan on closing it after we are done.
lsusb lists the wireless adaptor
Wireless Card Link
[[URL]
I have the driver CD. I installed ndiswrapper.I copied the files from my driver cd to my <home> Directory. Then installed the Windows XP version of the drivers using ndiswrapper -l <driver>. I then made ndiswrapper force the driver to the vendor ID of the wireless card. Using ndiswrapper -a <vendor ID> <Driver>(I did this last night and the vendor ID escapes me. I am at work now.)I finally ran depmod -a and modprobe ndiswrapperI goto the windows wireless driver application, and it shows the driver as loaded and the hardware as found.
However, it still does not list a wireless device in the network manager to where I can connect to my wireless. iwconfig does not show any wireless LAN, but it is still listed in lsusb. Also, the light that shows activity on the wireless device does not light up or blink at all. I have about 6 usb ports on my desktop and have tried everyone. The wireless card also works in Windows 7 64-bit On a strange side note. I do have internet access through LAN, (My laptop is atm a glorified wireless card .)
I recently switched from Windows XP to a clean install Ubuntu Karmic Koala 9.10 but it seems to be quite a problem to get the wifi up and running. In Windows the nearby network all appeared in network connections but the same section in Ubuntu is empty. So I decided to go with the ndiswrapper guide to solve the problem with an unclaimed driver. After an entire day messing with my computer I'm still not close... Below follows excerpts taken from the Ndiswrapper guide with posted results from my computer. "ndiswrapper won't work until it thinks that your Windows drivers have been properly installed and that they are the appropriate ones for your wireless card. You can run the command: ndiswrapper -l"
result:
WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
net5211 : driver installed
device (168C:0013) present (alternate driver: ath5k)
So I've posted the result the name of my wireless card below: lspci -nn
Result:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge [1106:0259]
00:00.1 Host bridge [0600]: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge [1106:1259]
[code]...
It seems like the network is disabled or unclaimed or both. What to do? I'm stuck after spending an entire day trying to install the wifi. I had no problems in Windows XP but it seems to be quite impossible in Ubuntu.
I have been running FC8 on this IBM T23 with a D-Link wireless adapter. Using MadWifi this has worked fine with Network Manager disabled. But now I have nuked that installation and replaced it with FC10. Network Manager is nice, and I would like to use it. And it kind-of works. Network Manager recognizes my router and all my neighbor's routers, but I can't connect.
[Code]....
I want to try to get wireless access to the wifi router with the xbox360 wireless network adapter.Is this possible?
View 1 Replies View RelatedI own an ASUS N61JV-X2 notebook PC. It has an Atheros Communication, Inc. AR9285 Wireless Network Adapter. 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 0280: 168c:002b (rev 01) I cannot see any SSIDs including my home Verizon FiOS 802.11 G WPA2-AES-TKIP encrypted network. I went to Starbucks to try to connect to their free Wi-Fi and I could not make a connection. How do I solve this problem so that I can connect to a SSID of my choice and make a wireless connection while using GNOME 3?
View 2 Replies View RelatedI installed the b43 drivers to enable the monitor mode for using kismet. but after installing, it shows "Device not Ready".
The dmesg | grep b43 output shows:
[ 86.449430] b43 ssb0:0: firmware: requesting b43/ucode15.fw
[ 146.449335] b43 ssb0:0: firmware: requesting b43-open/ucode15.fw
[ 206.448146] b43-phy0 ERROR: Firmware file "b43/ucode15.fw" not found
[ 206.448153] b43-phy0 ERROR: Firmware file "b43-open/ucode15.fw" not found
[ 206.448158] b43-phy0 ERROR: You must go to [URL] and download the correct firmware for this driver version. Please carefully read all instructions on this website. How to re-enable my wireless connection.
I have a old mac G4 and I just recently installed ubuntu 10.10 on it. It doesn't recognize my wireless adapter at all so I get no wireless on the computer. I've never used any linux distribution in my life so I don't have any idea how to install drivers for it.
View 1 Replies View RelatedI have found instructions but they are not working. I am new to Ubuntu and have only had a few classes that dealt with Fedora and CentOS. So I am rather new to Linux in general. The drivers say they are compatible with linux kernel 2.6 and later so I am going to assume they should work with ubuntu--am I correct in this assumption? If so, when one installs anything in ubuntu should one be set as the admin?
View 4 Replies View RelatedI have a problem installing mi dlink dlw-g122 wireless usb adapter.I installed the drivers, in fact when executing
ndiswrapper -l
the output is
dr71wu driver present, hardware present
but when I try to execute
modprobe ndiswrapper
I have this error:
FATAL : Error inserting ndiswrapper (/lib/modules/2.6.12.9-386/kernel/drivers/net/ndiswrapper/ndiswrapper.ko): Operation not permetted
im trying to install the RTL8192CU_linux_v3.0.2164.20110715 drivers so my new wireless adapter works, but I have hit a wall when trying to insert the drivers after makeing them its telling me
"-VGN-NS325J:~/wifi/driver/8188$ insmod 8192cu.ko
insmod: error inserting '8192cu.ko': -1 Operation not permitted
Im just after installing fedora 12 dual boot with windows 7. When I try to find my wireless network the laptop doesn't seem to picking it up. It works perfectly when I connect with a LAN cable.
View 2 Replies View Related
