Ubuntu Installation :: Drivers - 10.04 - Isn't Recognizing My Wireless Adapter
May 2, 2010
I am new to Linux and actually just finished my install about 30 minutes ago. Ubuntu 10.04 isn't recognizing my wireless adapter, so I need to install the drivers. I know where the drivers are, I just don't know how to install them on a Linux system.
Here is the driver page. I don't know how to download the .inf file (necessary?) but I have ndiswrapper, bcmwl5.sys, and sp33008.exe all in the downloads folder.
Apparently just double clicking the files does nothing, so what do I do now?
View 3 Replies
ADVERTISEMENT
Dec 14, 2009
I'm having some issues with openSUSE 11.2 recognizing my Broadcom adapter. Following the instructions in the two stickied topics, I can find the adapter both under YaST's Hardware Summary and using the console command /sbin/lspci. I cannot, however, find it with /sbin/lspci -n, and the boot log (viewed with dmesg | less) makes no mention of it either.
Do I need to turn it on or something? This is a dual boot machine, and it works fine under Windows, so I don't think there's a hardware failure at play here.
View 9 Replies
View Related
May 13, 2010
I downloaded from the following link: [url]... etinst.iso and i have a working flash drive Debian installer. I would like to be able to integrate driver support for my wireless adapter or my gprs phone for internet access during install so that I wont have to be connected via ethernet.
View 2 Replies
View Related
Nov 19, 2010
I'm using LiveCD to test my laptop with FC 14. It booted from the LiveCD image last night, but my wireless didn't work. I need the madwifi wireless drivers for my built in Atheros adapter.
Can I download the latest and greatest madwifi drivers, compile them and use them while running from the LiveCD image?
View 4 Replies
View Related
Nov 24, 2010
I recently reformatted and dual partitioned to both Windows 7 as well as ubuntu 10.10. Loading works fine and Windows 7 is 100% operational. I cannot seem to get my wireless network adapter to be read by Ubuntus 'Windows Wireless Drivers' gui. Here are the steps that I have done THUS far, to make sure that we are all on the right path. Before I go any further, my wireless network adapter is an old school WUSB11 Linksys Wireless Network Adapter (running version 2.6).
1) Downloaded and installed "ndiswrapper" from ubuntu's main website. I downloaded the common, utils and ndisgtk files and installed them accordingly.
2) I extracted these three files to the desktop of Ubuntu and accessed the terminal page.
3) From terminal I typed "cd Desktop" to change the directory to the desktop.
4) Next, I typed in "Sudo dpkg -i ndiswrapper-common_1.54-2ubuntu1_all.deb
Sudo dpkg -i ndiswrapper-utils-1.9_1.54-2ubuntu1_i386.deb
Sudo dpkg -i ndisgtk_0.8.5-1_i386.deb"
5) This installed Windows Wireless Drivers gui successfully and I can access it.
6) I have downloaded the driver files for the adapter from the cisco website and searched them for the required files needed.
7) After extracting the .INF file from the "Drivers" directory named "NETUSB.SYS" (I wasn't sure if the other associated files within the same folder needed to be present together with NETUSB so I moved everything to the desktop) I typed in "sudo ndiswrapper -i NETUSB.inf". After accessing the Windows Wireless Drivers gui I have noticed that the 'netusb' driver is present yet under it, the system states "Hardware present: No". This leads me to believe that maybe I installed incorrectly or my "fireware?" is not present? I was reading through the installation guide posted on the ubuntu website that in addition to the .INF file we also need the BIN file(s)? and SYS file(s)?.. The folder with the drivers for my adapter contains a BIN file but it is not within the "Drivers" section of the folder.
9) Upon mousing over the network Icon naturally my hardware is still not present.
10) From what I gather after the system finds the hardware I am to write into the terminal
[Code]....
View 2 Replies
View Related
Feb 3, 2010
I have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
[code]...
View 1 Replies
View Related
Jan 12, 2011
I have recently installed Linux Mint 10 on my laptop. When I look at the Device Manager in Windows 7, it says I have an Atheros AR9285 Wireless Network Adapter. Right now, I am unable to connect to wifi with Linux. What drivers am I able to install, and how would I install them?
View 3 Replies
View Related
Feb 24, 2010
I'm booting from disc on a compaq presario F700. Somehow, I messed everything up and now it's not reading that I have an OS. Which was previously vista. Now, when I boot from disc and try to install no partitions come up. I did open the blasted thing to clean it not too long but as far as I know, nothing dislodged. It is a laptop, btw. So, my kneejerk reaction is that the hard-drive got damaged or knocked loose. I also tried using kill-drive to erase it so I could start fresh, also no Hard drive detected. So, I'm going to try that. In the meantime I have another issue. When booting from disc I can't seem to get the drivers for my wireless adapter to install. I have them. Madwifi for AR5001X but I don't know where to put them via terminal.
View 9 Replies
View Related
Jul 14, 2010
i was given a new DLink DWA-130 REV E draft N usb wireless adapter and was wondering if there are linux drivers for it?
View 2 Replies
View Related
Mar 2, 2009
i have just installed Fedora 10 and now my wireless adapter doesn't work and i think it's because i need to install drivers for it.. I have been using Ubuntu for the last few weeks and it worked fine in ubuntu probably because ubuntu comes with drivers for my adapter already installed.. Now, i'm kind of newbie so i don't know where to look and what to do.I did lspci and here is my adapter.. Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)
View 1 Replies
View Related
Mar 18, 2010
I can't seem to find drivers for my wireless adapter, TL-WN722NC, so that it can work on Linux (Ubuntu). I have already emailed the company, TP-Link, and they said that it does not support Linux yet.Is there a way that I might be able to get drivers for it somewhere else?
View 5 Replies
View Related
Oct 21, 2010
I have a old mac G4 and I just recently installed ubuntu 10.10 on it. It doesn't recognize my wireless adapter at all so I get no wireless on the computer. I've never used any linux distribution in my life so I don't have any idea how to install drivers for it.
View 1 Replies
View Related
Mar 5, 2011
I really want to drop Windows, but wireless connectivity and frequent crashes are really discouraging me. I have a dual-boot W XP with Ubuntu 10.10. I do not have the computer on, so I'm writing this from my weak memory
USB Adapter - Netgear WNDA3100-100NAS = v2
The adapter works under W XP with no problems
The router, Linksys WRT54G sees the adapter in the dhcp table
lsusb lists the adapter.
I have copied the drivers from the install CD onto the desktop. I cannot figure out how to install or access those drivers for the installation. I tried to install the ndiswrapper from the software center, but the center shows it's available from the "main" source. I've looked in the package manager, but can't find it. When I go into terminal, and enter one of the suggested commands in the forums, it can't be located. I have a Belkin F5D8010 installed on this computer, and it works great under W XP. I want to try to get this installed, but until I can figure out installation of the ndiswrapper and how to access it, and get the drivers recognized, I'm at a standstill.
View 1 Replies
View Related
Jun 17, 2011
I have just installed Ubuntu 11.04 on an old machine to get a feel for it. No problems with the install, but I don't have a LAN connection lead spare so I'm trying to install my Belkin Wireless G USB Adapter (K75-F5D7050B which requires version 3 according to the Belkin site).
Unfortunately I can't find any Ubuntu software & driver versions on their site and I only have a windows installation disc.
View 8 Replies
View Related
Feb 12, 2011
Just made the jump to Ubuntu, and until this install I considered myself very tech savvy. Now not so much! Built my new desktop, loaded Ubuntu 64 bit no problem. But I'm having a terrible time figuring out how to load the native driver for my realtek wireless adapter. I successfully un-tarred the file, and used the terminal to run the make command by using cd command to navigate to the file. It returned a wall of text, and in my mind looked to work. Next I go to run "./clean" in the same file location in the terminal and it returns:
"ERROR: Module r8192s_usb does not exist in /proc/modules
ERROR: Module ieee80211_rsl does not exist in /proc/modules
ERROR: Module ieee80211_crypt_ccmp does not exist in /proc/modules
ERROR: Module ieee80211_crypt_tkip does not exist in /proc/modules
ERROR: Module ieee80211_crypt_wep does not exist in /proc/modules
ERROR: Module ieee80211_crypt does not exist in /proc/modules
Not completely sure if this is an issue, I try moving to the next step of instructions issuing the command "insmod 8712u.ko" in the terminal same file location and get the error message
insmod: error inserting '8712u.ko': -1 Operation not permitted
I've tried running "sudo insmod 8712u.ko" from both that file directory, and from my home file directory. My guess is I'm missing a step or need to be typing these commands in a different file directory in the terminal.
View 1 Replies
View Related
Sep 1, 2011
im trying to install the RTL8192CU_linux_v3.0.2164.20110715 drivers so my new wireless adapter works, but I have hit a wall when trying to insert the drivers after makeing them its telling me
"-VGN-NS325J:~/wifi/driver/8188$ insmod 8192cu.ko
insmod: error inserting '8192cu.ko': -1 Operation not permitted
View 5 Replies
View Related
Feb 8, 2010
I need to install the drivers for wireless.... rtl8187 11g USB adapter... I have a opensuse 11.2
View 7 Replies
View Related
Jan 5, 2010
I managed to get the older, weaker box on the net and running simply by plugging in the Belkin N-wireless adapter, discovering the Network Manager icon (this really should also be accessible from the system pull-down menu), left clicking to see all the local networks, selecting mine, and inputting the security key, and rebooting. Voila!)However, on the newer, more powerful box, the network Manager gives me nothing but "Wired connection" at every boot (there is no such connection), I created a wireless connection under the settings (accessed through create VPN settings), but the Manager sees no wireless networks. Reboot solves nothing Network Manager is not seeing anything, I suspect that the card although powered by the USB, is not being seen by the system.
View 8 Replies
View Related
Aug 3, 2010
Ok, so I am needing some drivers and I've been googling like hell to find em, however, I can never seem to find any. My adapter model is F6D6050v1.
PS: when I try sudo ndisgtk it comes up with command not found.
View 1 Replies
View Related
Mar 10, 2010
i have a viewsonic VA712b monitor that used to get 1280x1024 resolution on my dell optiplex gx260 that had the intel video card.i upgraded my motherboard cpu and memory..the nvidia 6100 that is onboard seems like it would be an improvement to my old onboard intel but the best resolution i can get is 1024x768
i installed the nvidia 185 drivers and it's not recognizing my monitor as a flat panel lcd but as a crt, also it won't set the correct refreshrate - either 60 or 75.. it's set at 50... since xorg 7.4 no longer uses a xorg.conf file.. i'm not sure how to go about manually adjusting the settings to ones that will actually work. i mean other than buying a separate graphics car (URL)
View 1 Replies
View Related
Oct 20, 2010
I just started using Ubuntu 10.10 recently. and Im not really sure how most of this stuff works. I could probably figure most of it out myself, but I have a question about using a wireless USB stick for internet.I do not have internet on my desktop (the computer with linux on it) and the only way i can get it is by using a Dynex Wireless G USB Network Adapter.
I do not have the disk for it. and Im guessing linux doesnt have the autoinstall thing that windows has (no offense to linux, im starting to love it more than windows). I have the driver for it on my windows computer. I was wondering if i could run the driver from a usb thumb drive.If not, then how can i get the network adapter to work?
View 5 Replies
View Related
Nov 22, 2010
Has anyone installed a wireless USB adapter right out of the box with 10.04? I've just spent 5 days trying to get a D-Link DWA-125 to work, and I (and don't buy a DWA-125!)
View 9 Replies
View Related
Jan 29, 2011
I have Ubuntu 10.4 and I have a skylink usb wireless adapter. It came with the driver on a disc but I don't know how to install it. I looked at the README file but I don't understand what to do.
View 14 Replies
View Related
Jul 8, 2011
I am also trying to install a wireless driver, but mine is for the Ralink 5370 USB wireless adapter. Do you have some patches for that driver, and could you show me how to install the driver?
View 9 Replies
View Related
May 19, 2015
DELL Inspiron 15 3543 (3000 Series)5th Generation Intel Core i5-5200U Processor (3M Cache, up to 2.70 GHz).I have installed Debian 8 and received following message relating missing firmware files rtl_nic/rtl8106e-1.fw (EDIT: I understand this is not wireless adapter, but wired adapter which appears to be working ok as I can connect to internet ok.)The wireless adapter wasn't recognised so I used LAN cable and completed the install.this is details of wireless adapter....
Code: Select allit@it:~$ lspci -vvnn | grep -A 9 Network
06:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01)
Subsystem: Dell Wireless 1704 802.11n + BT 4.0 [1028:0016]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
[code]...
View 14 Replies
View Related
Jan 4, 2011
is there a wireless adapter for linux with plug and play installation?USB or PCI/PCIE no problem.
View 14 Replies
View Related
May 9, 2009
I am doing network config of my laptop. I'm new to Fedora, so I'm not sure how it goes ...
I have an Ethernet device (eth0) and a wireless device, wlan0
Status in system->administration->network:
Tab devices:
eth0 : active
wlan0: inactive
Tab Hardware:
eth0: system
wlan0: configured (description: b43)
Double clicking on the wlan0 line gets you to Network Adapters Configuration, where adapter b43 grayed out) is associated with device wlan0. So far, so good (I did all the fwcutter stuff, so I assume this is the result). When I installed the system (from installcd, then update, then install broadcom-wl, ...) I configured it to be started up with network manager, automatically on startup. I managed to get it working exactly once in that session.
Problem is, it doesn't start up and the wireless is not even visible when you click the network manager icon. For that matter, eth0 does not start automatically either, but at least there is a button to start it in network manager. Coming back to the tab devices, clicking on wlan0 allows you to click on the activate button ... but there it says: Cannot activate network device wlan0! b43 device wlan0 does not seem to be present.
View 6 Replies
View Related
May 4, 2010
I am using a Toshiba Laptop model P205D-S7802 with an atheros wireless card. Since I upgraded to 10.04 I am unable to connect to the internet unless I use an ethernet cable. I have been surfing the threads for a fix and have tried what has been posted but to no avail.
HTML Code:
eth0 Link encap:Ethernet HWaddr 00:1b:38:b6:cb:98
inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::21b:38ff:feb6:cb98/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]...
View 8 Replies
View Related
Jun 13, 2010
my card is not recognized in any way by ifconfig or iwconfig as shown below, but is visible via lsusb. It is 54Mb usb, and has a detachable antenna with the Atheros chipset shown below. I have removed (by #) the ath_pci from the blacklist under /etc/modprobe.d but cannot seem to start this still. I used compat-wireless-2010-06-01 (06-12 appeared to have errors I could not easily overcome). The lspci -nn command only shows my internal broadcom which I am not currently using. My goal is to do wireless research so I need the atheros (among others)...
my hw: Dell series n, TP-Link's TL-WN422G USB wireless stick
$ lsusb | grep Ath
Bus 001 Device 004: ID 0cf3:1006 Atheros Communications, Inc.
$ lsmod | grep ath
ath9k 71145 0
[Code]....
Seems to me that their should only be one ath9k driver, but several are loaded. Are all required for functionality perhaps?
View 2 Replies
View Related
Feb 6, 2011
I just got a new HP G62 457dx and when I turn it on, it is not recognizing my wireless network, which all my other computers find fine. What do I need to do to get it to see the network?
[Code]....
View 9 Replies
View Related
